Ticket #364: nosmp.log

File nosmp.log, 9.6 KB (added by edurrant, 15 years ago)

example of boot with ACPI without any switches

Line 
1KEE Version 0x10000
2
3PSD_install options:" " @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec  3 2008 13:41:19
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xF92D0000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
8AcpiOsCreateLock F98171A0
9AcpiOsCreateLock F981CB64
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsPredefinedOverride: "_OSI"
15*** AcpiInitializeSubsystem Status = 0 ***
16ACPI: RSDP @ 0xFA7C0/0x14 (v0 ACPIAM)
17ACPI: RSDT @ 0xC6FC0000/0x38 (v1 A_M_I_ OEMRSDT  0x9000710 MSFT 0x97)
18ACPI: FACP @ 0xC6FC0200/0x84 (v2 A_M_I_ OEMFACP  0x9000710 MSFT 0x97)
19ACPI: DSDT @ 0xC6FC0440/0x4148 (v1 A0611 A0611000 0x0 INTL 0x2002026)
20ACPI: FACS @ 0xC6FCE000/0x40
21ACPI: APIC @ 0xC6FC0390/0x68 (v1 A_M_I_ OEMAPIC  0x9000710 MSFT 0x97)
22ACPI: MCFG @ 0xC6FC0400/0x3C (v1 A_M_I_ OEMMCFG  0x9000710 MSFT 0x97)
23ACPI: OEMB @ 0xC6FCE040/0x46 (v1 A_M_I_ AMI_OEM  0x9000710 MSFT 0x97)
24ACPI: SSDT @ 0xC6FC4590/0x206 (v1 A_M_I_ POWERNOW 0x1 AMD  0x1)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFE83440 New:FFCFFFBC SIG:[DSDT]
27*** AcpiLoadTables Status = 0 ***
28Table [DSDT]
29Table [FACS]
30Table [FACP]
31Table [APIC]
32Local APIC address: FEE00000h
33System also has 8259
34APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
35APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
36APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
37APIC_IO: IO ApicID 3h addr FECC0000h INTI 24
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
39APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level
40Table [MCFG]
41Table [OEMB]
42Table [SSDT]
43Size of FACDT 244
44Type of computer - Unspecified
45System vector the SCI interrupt is wired to in 8259 mode. 9
46System port address of the SMI Command Port 0x82F
47The value to write to SMI_CMD to disable SMI   0xE1
48The value to write to SMI_CMD to re-enable SMI 0x1E
49The value to write to SMI_CMD to enter the S4BIOS state 0x0
50System port address of the PM1a Event Register Block 800
51System port address of the PM1b Event Register Block 0
52Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
53System port address of the PM1a Control Register Block 804
54System port address of the PM1b Control Register Block 0
55Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
56System port address of the PM2 Control Register Block 0
57System port address of the Power Management Timer Control Register Block 808
58Number of bytes decoded by PM_TMR_BLK (=4) 4
59System port address of General-Purpose Event 0 Register Block 820
60System port address of General-Purpose Event 1 Register Block 0
61Number of bytes decoded by GPE0_BLK 0x4
62Number of bytes decoded by GPE1_BLK 0x0
63Offset within the ACPI general-purpose event model where GPE1 based events start 0
64GPE enable register: 0: 0
65GPE status register: 0: 0
66The worst-case hardware latency to enter and exit a C2 state 1 us
67The worst-case hardware latency to enter and exit a C3 state 85 us
68The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0
69The bit width of the processor's duty cycle setting value in the P_CNT register 4
70The RTC CMOS RAM index to the day-of-month alarm value 125
71The RTC CMOS RAM index to the month of year alarm value 126
72The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
73IA-PC Boot Architecture Flags 0x0
74Fixed feature flags A5
75The reset register:
76Type of address space - System I/O
77Register Bit Width  8
78Register Bit Offset 0
79Access size 0
80Address 3321
81The value to write to the RESET_REG port to reset the system 6
82***** Throttl Width 4 Offset 0
83AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB
84** AcpiEnableSubsystem Status = 0
85AcpiOsDerivePCIID([PCI0] ,[PIX0],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
86AcpiOsDerivePCIID([PCI0] ,[PIX2],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
87** Scan EC Status = 0
88** AcpiInitializeObjects mask:0 Status = 0
89Processor [CPU1]
90Processor [CPU2]
91Status 0x0 0
92PSDFree: at 0xF9800000 success!
93Found bridge "PCI0" Addr:0x180000 BBN is 0 Dev:0x18 Fun:0x0
94Finding:1 bridges
950:0.0  Class:600  Hdr:80   Bridge H->0
960:0.1  Class:600  Hdr:0   Bridge H->0
970:0.2  Class:600  Hdr:0   Bridge H->0
980:0.3  Class:600  Hdr:0   Bridge H->0
990:0.4  Class:600  Hdr:0   Bridge H->0
1000:0.5  Class:800  Hdr:80
1010:0.6  Class:600  Hdr:0   Bridge H->0
1020:0.7  Class:600  Hdr:0   Bridge H->0
1030:1.0  Class:604  Hdr:1   Bridge 0->1 Bridge
1040:2.0  Class:604  Hdr:1   Bridge 0->2 Bridge
1050:3.0  Class:604  Hdr:1   Bridge 0->3 Bridge
1060:14.0  Class:200  Hdr:0
1070:15.0  Class:101  Hdr:80
1080:15.1  Class:101  Hdr:0
1090:16.0  Class:C03  Hdr:80
1100:16.1  Class:C03  Hdr:80
1110:16.2  Class:C03  Hdr:80
1120:16.3  Class:C03  Hdr:80
1130:16.4  Class:C03  Hdr:80
1140:17.0  Class:601  Hdr:80
1150:17.5  Class:401  Hdr:0
1160:24.0  Class:600  Hdr:80   Bridge H->0
1170:24.1  Class:600  Hdr:80   Bridge H->0
1180:24.2  Class:600  Hdr:80   Bridge H->0
1190:24.3  Class:600  Hdr:80   Bridge H->0
1202:0.0  Class:300  Hdr:80
1212:0.1  Class:380  Hdr:0
122PCI Bus scan: 4 PCI buses found.
123Scan ACPI tree for PCI functions
1240:24.0  'PCI0' (F92D1DA0)
1250:0.0  'VIAN' (F92D2198)
1260:0.1  'NBF1' (F92D2268)
1270:0.2  'NBF2' (F92D22B8)
1280:0.3  'NBF3' (F92D2308)
1290:0.4  'NBF4' (F92D2358)
1300:0.5  'NBF5' (F92D23A8)
1310:0.6  'NBF6' (F92D2458)
1320:0.7  'NBF7' (F92D24A8)
1330:1.0  'P0P1' (F92D24F8)
1340:2.0  'NBPG' (F92D25A8)
1352:0.0  'PEGB' (F92D2658)
1360:3.0  'NBP0' (F92D2788)
1373:0.0  'PE0B' (F92D2838)
1380:17.0  'SBRG' (F92D28E8)
1390:17.5  'AC97' (F92D63A8)
1400:17.6  'MC97' (F92D63F8)
1410:16.0  'USB1' (F92D6568)
1420:16.1  'USB2' (F92D68B8)
1430:16.2  'USB3' (F92D6B48)
1440:16.3  'USB4' (F92D6DD8)
1450:16.4  'EHCI' (F92D7068)
1460:16.5  'VUSB' (F92D7140)
1470:18.0  'ILAN' (F92D7250)
1480:15.0  'SATA' (F92D7338)
1490:15.1  'IDEC' (F92D7C68)
1500:11.0  'PCI1' (F92D8A10)
1510:12.0  'PCI2' (F92D8AC0)
1520:14.0  'RTL1' (F92D8B70)
153Bridges found:
1540:24.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F92D1DA0) _PRT
1550:1.0  class:604  type: 1  Bus 0->1  ACPI: 'P0P1' (F92D24F8) _PRT
1560:2.0  class:604  type: 1  Bus 0->2  ACPI: 'NBPG' (F92D25A8) _PRT
1570:3.0  class:604  type: 1  Bus 0->3  ACPI: 'NBP0' (F92D2788) _PRT
158IRQLinks found:
1590: 'LNKA' (F92D9AF8)  P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:16.1 0:16.0
160                       A[]
1611: 'LNKB' (F92D9D88)  P[ 3, 4,*5, 6, 7, 10, 11, 12, 14, 15] <- 0:16.3 0:16.2 0:15.0
162                       A[]
1632: 'LNKH' (F92DAB98)  P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 2:0.0
164                       A[]
1653: 'LNKC' (F92D9FE0)  P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:17.5 0:16.4
166                       A[]
1674: 'LNKD' (F92DA238)  P[]
168                       A[]
1695: 'LNKF' (F92DA6E8)  P[]
170                       A[]
1716: 'LNKE' (F92DA490)  P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:14.0
172                       A[]
173PCI devices found:
1740:0.0  1106:336  'VIAN'
1750:0.1  1106:1336  'NBF1'
1760:0.2  1106:2336  'NBF2'
1770:0.3  1106:3336  'NBF3'
1780:0.4  1106:4336  'NBF4'
1790:0.5  1106:5336  'NBF5'
1800:0.6  1106:6290  'NBF6'
1810:0.7  1106:7336  'NBF7'
1820:1.0  1106:B188  'P0P1'
1830:2.0  1106:A238  'NBPG'
1840:3.0  1106:C238  'NBP0'
1850:14.0  10EC:8139  'RTL1'  IRQs: PCI:11 PIC:'LNKE':11 APIC:20
1860:15.0  1106:3149  'SATA'  IRQs: PCI:5 PIC:'LNKB':5 APIC:20
1870:15.1  1106:571  'IDEC'  IRQs: PCI:0 PIC:0 APIC:0
1880:16.0  1106:3038  'USB1'  IRQs: PCI:10 PIC:'LNKA':10 APIC:21
1890:16.1  1106:3038  'USB2'  IRQs: PCI:10 PIC:'LNKA':10 APIC:21
1900:16.2  1106:3038  'USB3'  IRQs: PCI:5 PIC:'LNKB':5 APIC:21
1910:16.3  1106:3038  'USB4'  IRQs: PCI:5 PIC:'LNKB':5 APIC:21
1920:16.4  1106:3104  'EHCI'  IRQs: PCI:11 PIC:'LNKC':11 APIC:21
1930:17.0  1106:3227  'SBRG'
1940:17.5  1106:3059  'AC97'  IRQs: PCI:11 PIC:'LNKC':11 APIC:22
1950:24.0  1022:1100  'PCI0'
1960:24.1  1022:1101       
1970:24.2  1022:1102       
1980:24.3  1022:1103       
1992:0.0  1002:5B63  'PEGB'  IRQs: PCI:10 PIC:'LNKH':10 APIC:24 MSI
2002:0.1  1002:5B73       
201Bus detected - 3
202** AcpiInstall Power Device Status = 0
203** AcpiInstall Sleep Device Status = 0 - AE_OK
204** AcpiInstall PMTimer Device Status = 0
205** Total use:135376 unuse:6336 count:2319 **
206Get GpeHdl Status = 0 - AE_OK
207Event [_L04]
208Install GPE0x4  Status 0x0
209Event [_L05]
210Install GPE0x5  Status 0x0
211Event [_L01]
212Install GPE0x1  Status 0x0
213Event [_L02]
214Install GPE0x2  Status 0x0
215Event [_L09]
216Install GPE0x9  Status 0x0
217Event [_L08]
218Install GPE0x8  Status 0x0
219Event [_L0D]
220Install GPE0xD  Status 0x0
221Event [_L0E]
222Install GPE0xE  Status 0x0
223Event [_L03]
224Install GPE0x3  Status 0x0
225EndScan GPE Status 0
226===== Info ========
227Int Level 9
228In Xrupt F92C2A10 in arg F92C2A10
229      Node
230Name [_GPE]
231Flags: 0
232Reg count 2
233GPE0x1 Flag:0x2 Status - Set 0x0 Enable 0x0
234GPE0x2 Flag:0x2 Status - Set 0x0 Enable 0x0
235GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
236GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
237GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
238GPE0 Status:820 Enable:822 EnableWake:3E EnableRun:0 BaseGPENumber:0
239GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
240GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
241GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
242GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
243GPE1 Status:821 Enable:823 EnableWake:63 EnableRun:0 BaseGPENumber:8
244=========== Status 0x0 0
245APM: PSD find success. PSD Ftable:F981017C
246APM:Max C state 0
247Register Notify 1st FFCF528D
248FindPCIDevice
249 Need: B:0 D:F F:0
250Finding APIC0 PIC5 Dev: [SATA]
251FindPCIDevice
252 Need: B:0 D:F F:1
253Finding APIC0 PIC0 Dev: [IDEC]
254******** Event tread ***************
255AllocateSuspendMemory s_cpu:0
256Alloc s_cpu OK CPU0 2304 bytes at 0
257AllocSuspend: CPU0 CR3:211000
258Status 1Mb alloc 0
259APM: Setting suspend state:1