Ticket #364: PIC.LOG

File PIC.LOG, 10.3 KB (added by edurrant, 16 years ago)

Log from good boot with ACPI /SMP /PIC

Line 
1KEE Version 0x10000
2
3PSD_install options:" /SMP /PIC" @#netlabs dot org:3.14#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Dec 3 2008 13:41:19
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6AcpiOsInitialize ALLOC size 65536 at 0xF92D0000
7AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
8AcpiOsCreateLock F98171A0
9AcpiOsCreateLock F981CB64
10AcpiOsPredefinedOverride: "_REV"
11AcpiOsPredefinedOverride: "_OS_"
12AcpiOsPredefinedOverride: override to eComStation
13AcpiOsPredefinedOverride: "_GL_"
14AcpiOsPredefinedOverride: "_OSI"
15*** AcpiInitializeSubsystem Status = 0 ***
16ACPI: RSDP @ 0xFA7C0/0x14 (v0 ACPIAM)
17ACPI: RSDT @ 0xC6FC0000/0x38 (v1 A_M_I_ OEMRSDT 0x9000710 MSFT 0x97)
18ACPI: FACP @ 0xC6FC0200/0x84 (v2 A_M_I_ OEMFACP 0x9000710 MSFT 0x97)
19ACPI: DSDT @ 0xC6FC0440/0x4148 (v1 A0611 A0611000 0x0 INTL 0x2002026)
20ACPI: FACS @ 0xC6FCE000/0x40
21ACPI: APIC @ 0xC6FC0390/0x68 (v1 A_M_I_ OEMAPIC 0x9000710 MSFT 0x97)
22ACPI: MCFG @ 0xC6FC0400/0x3C (v1 A_M_I_ OEMMCFG 0x9000710 MSFT 0x97)
23ACPI: OEMB @ 0xC6FCE040/0x46 (v1 A_M_I_ AMI_OEM 0x9000710 MSFT 0x97)
24ACPI: SSDT @ 0xC6FC4590/0x206 (v1 A_M_I_ POWERNOW 0x1 AMD 0x1)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFE83440 New:FFCFFFBC SIG:[DSDT]
27*** AcpiLoadTables Status = 0 ***
28Table [DSDT]
29Table [FACS]
30Table [FACP]
31Table [APIC]
32Local APIC address: FEE00000h
33System also has 8259
34APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
35APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable
36APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
37APIC_IO: IO ApicID 3h addr FECC0000h INTI 24
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
39APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: Low 1 Trigger by: Level
40Table [MCFG]
41Table [OEMB]
42Table [SSDT]
43Size of FACDT 244
44Type of computer - Unspecified
45System vector the SCI interrupt is wired to in 8259 mode. 9
46System port address of the SMI Command Port 0x82F
47The value to write to SMI_CMD to disable SMI 0xE1
48The value to write to SMI_CMD to re-enable SMI 0x1E
49The value to write to SMI_CMD to enter the S4BIOS state 0x0
50System port address of the PM1a Event Register Block 800
51System port address of the PM1b Event Register Block 0
52Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
53System port address of the PM1a Control Register Block 804
54System port address of the PM1b Control Register Block 0
55Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
56System port address of the PM2 Control Register Block 0
57System port address of the Power Management Timer Control Register Block 808
58Number of bytes decoded by PM_TMR_BLK (=4) 4
59System port address of General-Purpose Event 0 Register Block 820
60System port address of General-Purpose Event 1 Register Block 0
61Number of bytes decoded by GPE0_BLK 0x4
62Number of bytes decoded by GPE1_BLK 0x0
63Offset within the ACPI general-purpose event model where GPE1 based events start 0
64GPE enable register: 0: 0
65GPE status register: 0: 0
66The worst-case hardware latency to enter and exit a C2 state 1 us
67The worst-case hardware latency to enter and exit a C3 state 85 us
68The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0
69The bit width of the processor's duty cycle setting value in the P_CNT register 4
70The RTC CMOS RAM index to the day-of-month alarm value 125
71The RTC CMOS RAM index to the month of year alarm value 126
72The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
73IA-PC Boot Architecture Flags 0x0
74Fixed feature flags A5
75The reset register:
76Type of address space - System I/O
77Register Bit Width 8
78Register Bit Offset 0
79Access size 0
80Address 3321
81The value to write to the RESET_REG port to reset the system 6
82***** Throttl Width 4 Offset 0
83AcpiOsInstallIntterrupHandler IRQ9 handler F9303CDB
84** AcpiEnableSubsystem Status = 0
85AcpiOsDerivePCIID([PCI0] ,[PIX0],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
86AcpiOsDerivePCIID([PCI0] ,[PIX2],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0
87** Scan EC Status = 0
88** AcpiInitializeObjects mask:0 Status = 0
89Processor [CPU1]
90Processor [CPU2]
91Status 0x0 0
92Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
93Status Evaluate Processor 0x0 AE_OK
94Usable:2 Counter:0
95 CPU id to N:0
96 ProcId: 0x1
97 P_BLK: 0x810
98 P_BLK len: 0x6
99CPU0 Status Evaluate _PCT 0x0 AE_OK
100 Perf control: 0x0
101 Perf status: 0x0
102CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND
103Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
104Status Evaluate Processor 0x0 AE_OK
105Usable:2 Counter:1
106 CPU id to N:1
107 ProcId: 0x2
108 P_BLK: 0x0
109 P_BLK len: 0x0
110CPU1 Status Evaluate _PCT 0x0 AE_OK
111 Perf control: 0x0
112 Perf status: 0x0
113CPU1 Status Evaluate _CST 0x5 AE_NOT_FOUND
114PSDFree: at 0xF9800000 success!
115Found bridge "PCI0" Addr:0x180000 BBN is 0 Dev:0x18 Fun:0x0
116Finding:1 bridges
1170:0.0 Class:600 Hdr:80 Bridge H->0
1180:0.1 Class:600 Hdr:0 Bridge H->0
1190:0.2 Class:600 Hdr:0 Bridge H->0
1200:0.3 Class:600 Hdr:0 Bridge H->0
1210:0.4 Class:600 Hdr:0 Bridge H->0
1220:0.5 Class:800 Hdr:80
1230:0.6 Class:600 Hdr:0 Bridge H->0
1240:0.7 Class:600 Hdr:0 Bridge H->0
1250:1.0 Class:604 Hdr:1 Bridge 0->1 Bridge
1260:2.0 Class:604 Hdr:1 Bridge 0->2 Bridge
1270:3.0 Class:604 Hdr:1 Bridge 0->3 Bridge
1280:14.0 Class:200 Hdr:0
1290:15.0 Class:101 Hdr:80
1300:15.1 Class:101 Hdr:0
1310:16.0 Class:C03 Hdr:80
1320:16.1 Class:C03 Hdr:80
1330:16.2 Class:C03 Hdr:80
1340:16.3 Class:C03 Hdr:80
1350:16.4 Class:C03 Hdr:80
1360:17.0 Class:601 Hdr:80
1370:17.5 Class:401 Hdr:0
1380:24.0 Class:600 Hdr:80 Bridge H->0
1390:24.1 Class:600 Hdr:80 Bridge H->0
1400:24.2 Class:600 Hdr:80 Bridge H->0
1410:24.3 Class:600 Hdr:80 Bridge H->0
1422:0.0 Class:300 Hdr:80
1432:0.1 Class:380 Hdr:0
144PCI Bus scan: 4 PCI buses found.
145Scan ACPI tree for PCI functions
1460:24.0 'PCI0' (F92D1DA0)
1470:0.0 'VIAN' (F92D2198)
1480:0.1 'NBF1' (F92D2268)
1490:0.2 'NBF2' (F92D22B8)
1500:0.3 'NBF3' (F92D2308)
1510:0.4 'NBF4' (F92D2358)
1520:0.5 'NBF5' (F92D23A8)
1530:0.6 'NBF6' (F92D2458)
1540:0.7 'NBF7' (F92D24A8)
1550:1.0 'P0P1' (F92D24F8)
1560:2.0 'NBPG' (F92D25A8)
1572:0.0 'PEGB' (F92D2658)
1580:3.0 'NBP0' (F92D2788)
1593:0.0 'PE0B' (F92D2838)
1600:17.0 'SBRG' (F92D28E8)
1610:17.5 'AC97' (F92D63A8)
1620:17.6 'MC97' (F92D63F8)
1630:16.0 'USB1' (F92D6568)
1640:16.1 'USB2' (F92D68B8)
1650:16.2 'USB3' (F92D6B48)
1660:16.3 'USB4' (F92D6DD8)
1670:16.4 'EHCI' (F92D7068)
1680:16.5 'VUSB' (F92D7140)
1690:18.0 'ILAN' (F92D7250)
1700:15.0 'SATA' (F92D7338)
1710:15.1 'IDEC' (F92D7C68)
1720:11.0 'PCI1' (F92D8A10)
1730:12.0 'PCI2' (F92D8AC0)
1740:14.0 'RTL1' (F92D8B70)
175Bridges found:
1760:24.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F92D1DA0) _PRT
1770:1.0 class:604 type: 1 Bus 0->1 ACPI: 'P0P1' (F92D24F8) _PRT
1780:2.0 class:604 type: 1 Bus 0->2 ACPI: 'NBPG' (F92D25A8) _PRT
1790:3.0 class:604 type: 1 Bus 0->3 ACPI: 'NBP0' (F92D2788) _PRT
180IRQLinks found:
1810: 'LNKA' (F92D9AF8) P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:16.1 0:16.0
182 A[]
1831: 'LNKB' (F92D9D88) P[ 3, 4,*5, 6, 7, 10, 11, 12, 14, 15] <- 0:16.3 0:16.2 0:15.0
184 A[]
1852: 'LNKH' (F92DAB98) P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 2:0.0
186 A[]
1873: 'LNKC' (F92D9FE0) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:17.5 0:16.4
188 A[]
1894: 'LNKD' (F92DA238) P[]
190 A[]
1915: 'LNKF' (F92DA6E8) P[]
192 A[]
1936: 'LNKE' (F92DA490) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:14.0
194 A[]
195PCI devices found:
1960:0.0 1106:336 'VIAN'
1970:0.1 1106:1336 'NBF1'
1980:0.2 1106:2336 'NBF2'
1990:0.3 1106:3336 'NBF3'
2000:0.4 1106:4336 'NBF4'
2010:0.5 1106:5336 'NBF5'
2020:0.6 1106:6290 'NBF6'
2030:0.7 1106:7336 'NBF7'
2040:1.0 1106:B188 'P0P1'
2050:2.0 1106:A238 'NBPG'
2060:3.0 1106:C238 'NBP0'
2070:14.0 10EC:8139 'RTL1' IRQs: PCI:11 PIC:'LNKE':11 APIC:20
2080:15.0 1106:3149 'SATA' IRQs: PCI:5 PIC:'LNKB':5 APIC:20
2090:15.1 1106:571 'IDEC' IRQs: PCI:0 PIC:0 APIC:0
2100:16.0 1106:3038 'USB1' IRQs: PCI:10 PIC:'LNKA':10 APIC:21
2110:16.1 1106:3038 'USB2' IRQs: PCI:10 PIC:'LNKA':10 APIC:21
2120:16.2 1106:3038 'USB3' IRQs: PCI:5 PIC:'LNKB':5 APIC:21
2130:16.3 1106:3038 'USB4' IRQs: PCI:5 PIC:'LNKB':5 APIC:21
2140:16.4 1106:3104 'EHCI' IRQs: PCI:11 PIC:'LNKC':11 APIC:21
2150:17.0 1106:3227 'SBRG'
2160:17.5 1106:3059 'AC97' IRQs: PCI:11 PIC:'LNKC':11 APIC:22
2170:24.0 1022:1100 'PCI0'
2180:24.1 1022:1101
2190:24.2 1022:1102
2200:24.3 1022:1103
2212:0.0 1002:5B63 'PEGB' IRQs: PCI:10 PIC:'LNKH':10 APIC:24 MSI
2222:0.1 1002:5B73
223Bus detected - 3
224** AcpiInstall Power Device Status = 0
225** AcpiInstall Sleep Device Status = 0 - AE_OK
226** AcpiInstall PMTimer Device Status = 0
227** Total use:135248 unuse:6336 count:2319 **
228Get GpeHdl Status = 0 - AE_OK
229Event [_L04]
230Install GPE0x4 Status 0x0
231Event [_L05]
232Install GPE0x5 Status 0x0
233Event [_L01]
234Install GPE0x1 Status 0x0
235Event [_L02]
236Install GPE0x2 Status 0x0
237Event [_L09]
238Install GPE0x9 Status 0x0
239Event [_L08]
240Install GPE0x8 Status 0x0
241Event [_L0D]
242Install GPE0xD Status 0x0
243Event [_L0E]
244Install GPE0xE Status 0x0
245Event [_L03]
246Install GPE0x3 Status 0x0
247EndScan GPE Status 0
248===== Info ========
249Int Level 9
250In Xrupt F92C2A10 in arg F92C2A10
251 Node
252Name [_GPE]
253Flags: 0
254Reg count 2
255GPE0x1 Flag:0x2 Status - Set 0x0 Enable 0x0
256GPE0x2 Flag:0x2 Status - Set 0x0 Enable 0x0
257GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
258GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
259GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
260GPE0 Status:820 Enable:822 EnableWake:3E EnableRun:0 BaseGPENumber:0
261GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
262GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
263GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
264GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
265GPE1 Status:821 Enable:823 EnableWake:63 EnableRun:0 BaseGPENumber:8
266=========== Status 0x0 0
267APM: PSD find success. PSD Ftable:F981017C
268APM:Max C state 0
269Register Notify 1st FFCF528D
270FindPCIDevice
271 Need: B:0 D:F F:0
272Finding APIC0 PIC5 Dev: [SATA]
273FindPCIDevice
274 Need: B:0 D:F F:1
275Finding APIC0 PIC0 Dev: [IDEC]
276******** Event tread ***************
277AllocateSuspendMemory s_cpu:0
278Alloc s_cpu OK CPU0 2304 bytes at 0
279AllocSuspend: CPU0 CR3:211000
280AllocSuspend: CPU1 CR3:C6F23000
281Status 1Mb alloc 0
282APM: Setting suspend state:1