| 1 | AllocIRQMem at 0xFFE88000 (24576 bytes) |
|---|
| 2 | |
|---|
| 3 | PSD_install options:" /FS /PIC" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40 |
|---|
| 4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
|---|
| 5 | New Stack = FFD00000 Size:0x8000 |
|---|
| 6 | AcpiOsInitialize ALLOC size 65536 at 0xF9AC0000 |
|---|
| 7 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
|---|
| 8 | AcpiOsCreateLock 8 |
|---|
| 9 | AcpiOsCreateLock 8 |
|---|
| 10 | AcpiOsPredefinedOverride: "_REV" |
|---|
| 11 | AcpiOsPredefinedOverride: "_OS_" |
|---|
| 12 | AcpiOsPredefinedOverride: override to eComStation |
|---|
| 13 | AcpiOsPredefinedOverride: "_GL_" |
|---|
| 14 | AcpiOsCreateSemaphore: O.K. Handle=0xF9AC03F8 M:1 I:0 |
|---|
| 15 | AcpiOsPredefinedOverride: "_OSI" |
|---|
| 16 | AcpiOsPredefinedOverride: override to eCS |
|---|
| 17 | *** AcpiInitializeSubsystem Status = 0 *** |
|---|
| 18 | ACPI: RSDP @ 0xF7AE0/0x14 (v0 PTLTD ) |
|---|
| 19 | ACPI: RSDT @ 0x1FEF6757/0x4C (v1 DELL PE_SC3 0x6040000 DELL 0x0) |
|---|
| 20 | ACPI: FACP @ 0x1FEF9B88/0x74 (v1 DELL PE_SC3 0x6040000 DELL 0xF4240) |
|---|
| 21 | ACPI: DSDT @ 0x1FEF67A3/0x33E5 (v1 DELL PE_SC3 0x6040000 MSFT 0x100000E) |
|---|
| 22 | ACPI: FACS @ 0x1FEFAFC0/0x40 |
|---|
| 23 | ACPI: TCPA @ 0x1FEF9BFC/0x32 (v1 Phoeni x 0x6040000 TL 0x0) |
|---|
| 24 | ACPI: SLIC @ 0x1FEF9C2E/0x24 (v1 DELL PE_SC3 0x6040000 PTL 0x1) |
|---|
| 25 | ACPI: SPCR @ 0x1FEF9C52/0x50 (v1 DELL PE_SC3 0x6040000 PTL 0x1) |
|---|
| 26 | ACPI: SRAT @ 0x1FEF9CA2/0xA0 (v1 AMD HAMMER 0x6040000 AMD 0x1) |
|---|
| 27 | ACPI: SSDT @ 0x1FEF9D42/0x1C4 (v1 AMD POWERNOW 0x6040000 AMD 0x1) |
|---|
| 28 | ACPI: MCFG @ 0x1FEF9F06/0x3C (v1 PTLTD MCFG 0x6040000 LTP 0x0) |
|---|
| 29 | ACPI: HPET @ 0x1FEF9F42/0x38 (v1 PTLTD HPETTBL 0x6040000 LTP 0x1) |
|---|
| 30 | ACPI: APIC @ 0x1FEF9F7A/0x5E (v1 PTLTD 0x6040000 LTP 0x0) |
|---|
| 31 | ACPI: BOOT @ 0x1FEF9FD8/0x28 (v1 PTLTD $SBFTBL$ 0x6040000 LTP 0x1) |
|---|
| 32 | *** AcpiInitializeTables Status = 0 *** |
|---|
| 33 | AcpiOsTableOverride Ex:FFE847A3 New:FFCFFFC4 SIG:[DSDT] |
|---|
| 34 | *** AcpiLoadTables Status = 0 *** |
|---|
| 35 | Table [DSDT] |
|---|
| 36 | Table [FACS] |
|---|
| 37 | Table [FACP] |
|---|
| 38 | Table [TCPA] |
|---|
| 39 | Table [SLIC] |
|---|
| 40 | Table [SPCR] |
|---|
| 41 | Table [SRAT] |
|---|
| 42 | Table [SSDT] |
|---|
| 43 | Table [MCFG] |
|---|
| 44 | Table [HPET] |
|---|
| 45 | Table [APIC] |
|---|
| 46 | Local APIC address: FEE00000h |
|---|
| 47 | System also has 8259 |
|---|
| 48 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
|---|
| 49 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
|---|
| 50 | APIC_IO: IO ApicID 2h addr FEC00000h INTI 0 |
|---|
| 51 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge |
|---|
| 52 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge |
|---|
| 53 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: High 0 Trigger by: Edge |
|---|
| 54 | Table [BOOT] |
|---|
| 55 | Size of FACDT 244 |
|---|
| 56 | Type of computer - Unspecified |
|---|
| 57 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
|---|
| 58 | System port address of the SMI Command Port 0x842E |
|---|
| 59 | The value to write to SMI_CMD to disable SMI 0xF0 |
|---|
| 60 | The value to write to SMI_CMD to re-enable SMI 0xF1 |
|---|
| 61 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
|---|
| 62 | System port address of the PM1a Event Register Block 8000 |
|---|
| 63 | System port address of the PM1b Event Register Block 0 |
|---|
| 64 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
|---|
| 65 | System port address of the PM1a Control Register Block 8004 |
|---|
| 66 | System port address of the PM1b Control Register Block 0 |
|---|
| 67 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
|---|
| 68 | System port address of the PM2 Control Register Block 801C |
|---|
| 69 | Number of bytes decoded by PM2_CNT_BLK 1 |
|---|
| 70 | System port address of the Power Management Timer Control Register Block 8008 |
|---|
| 71 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
|---|
| 72 | System port address of General-Purpose Event 0 Register Block 8020 |
|---|
| 73 | System port address of General-Purpose Event 1 Register Block 0 |
|---|
| 74 | Number of bytes decoded by GPE0_BLK 0x8 |
|---|
| 75 | Number of bytes decoded by GPE1_BLK 0x0 |
|---|
| 76 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
|---|
| 77 | GPE enable register: 22: 0: 2: 0 |
|---|
| 78 | GPE status register: 0: 0: 0: 0 |
|---|
| 79 | The system does not support a C2 state. FFFF |
|---|
| 80 | The system does not support a C3 state FFFF |
|---|
| 81 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
|---|
| 82 | The RTC CMOS RAM index to the day-of-month alarm value 125 |
|---|
| 83 | The RTC CMOS RAM index to the month of year alarm value 126 |
|---|
| 84 | The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 |
|---|
| 85 | IA-PC Boot Architecture Flags 0x0 |
|---|
| 86 | Fixed feature flags A5 |
|---|
| 87 | The reset register: |
|---|
| 88 | Type of address space - System Memory |
|---|
| 89 | Register Bit Width 0 |
|---|
| 90 | Register Bit Offset 0 |
|---|
| 91 | Access size 0 |
|---|
| 92 | Address 0 |
|---|
| 93 | The value to write to the RESET_REG port to reset the system 0 |
|---|
| 94 | ***** Throttl Width 0 Offset 1 |
|---|
| 95 | AcpiOsInstallIntterrupHandler IRQ9 handler F9B00F09 |
|---|
| 96 | ************ AcpiEnableSubsystem Status = 0 |
|---|
| 97 | AcpiOsDerivePCIID([PCI0] ,[P74_],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0 |
|---|
| 98 | AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:1 Fun:0 - Derive: Bus:0 Dev:1 Fun:0 |
|---|
| 99 | ************ Scan EC Status = 0 |
|---|
| 100 | ************ AcpiInitializeObjects mask:0 Status = 0 |
|---|
| 101 | Processor [C000] |
|---|
| 102 | Processor [C001] |
|---|
| 103 | Processor [C002] |
|---|
| 104 | Processor [C003] |
|---|
| 105 | Processor [C004] |
|---|
| 106 | Processor [C005] |
|---|
| 107 | Processor [C006] |
|---|
| 108 | Processor [C007] |
|---|
| 109 | Processor [C008] |
|---|
| 110 | Processor [C009] |
|---|
| 111 | Processor [C00A] |
|---|
| 112 | Processor [C00B] |
|---|
| 113 | Processor [C00C] |
|---|
| 114 | Processor [C00D] |
|---|
| 115 | Processor [C00E] |
|---|
| 116 | Processor [C00F] |
|---|
| 117 | Status 0x0 0 |
|---|
| 118 | ************ AcpiInstallNotifyHandler System Status = 0 |
|---|
| 119 | ************ AcpiInstallNotifyHandler Device Status = 0 |
|---|
| 120 | PSDFree: at 0xF9AD0000 success! |
|---|
| 121 | Found bridge "PCI0" BBN is absent status:5 |
|---|
| 122 | Finding:0 bridges |
|---|
| 123 | 0:0.0 Class:580 Hdr:0 |
|---|
| 124 | 0:1.0 Class:601 Hdr:80 |
|---|
| 125 | 0:1.1 Class:C05 Hdr:80 |
|---|
| 126 | 0:2.0 Class:C03 Hdr:80 |
|---|
| 127 | 0:2.1 Class:C03 Hdr:80 |
|---|
| 128 | 0:7.0 Class:101 Hdr:0 |
|---|
| 129 | 0:8.0 Class:101 Hdr:0 |
|---|
| 130 | 0:9.0 Class:604 Hdr:1 Bridge 0->1 |
|---|
| 131 | 0:11.0 Class:604 Hdr:1 Bridge 0->2 |
|---|
| 132 | 0:12.0 Class:604 Hdr:1 Bridge 0->3 |
|---|
| 133 | 0:13.0 Class:604 Hdr:1 Bridge 0->4 |
|---|
| 134 | 0:14.0 Class:604 Hdr:1 Bridge 0->5 |
|---|
| 135 | 0:24.0 Class:600 Hdr:80 Bridge H->0 |
|---|
| 136 | 0:24.1 Class:600 Hdr:80 Bridge H->0 |
|---|
| 137 | 0:24.2 Class:600 Hdr:80 Bridge H->0 |
|---|
| 138 | 0:24.3 Class:600 Hdr:80 Bridge H->0 |
|---|
| 139 | 1:8.0 Class:300 Hdr:0 |
|---|
| 140 | 2:0.0 Class:200 Hdr:0 |
|---|
| 141 | PCI Bus scan: 6 PCI buses found. |
|---|
| 142 | Scan ACPI tree for PCI functions |
|---|
| 143 | 0:0.0 'PCI0' (F9AC1DB0) |
|---|
| 144 | 0:1.0 'LPC0' (F9AC23A0) |
|---|
| 145 | 0:1.1 'SMB0' (F9AC4118) |
|---|
| 146 | 0:2.0 'USB0' (F9AC4370) |
|---|
| 147 | 0:2.1 'USB2' (F9AC43E8) |
|---|
| 148 | 0:4.0 'ACI0' (F9AC4438) |
|---|
| 149 | 0:4.1 'MCI0' (F9AC4488) |
|---|
| 150 | 0:9.0 'P2P0' (F9AC44D8) |
|---|
| 151 | 0:6.0 'IDE0' (F9AC48E0) |
|---|
| 152 | 0:8.0 'SAT1' (F9AC5420) |
|---|
| 153 | 0:7.0 'SAT0' (F9AC58A0) |
|---|
| 154 | 0:14.0 'XVR0' (F9AC5D20) |
|---|
| 155 | 0:13.0 'XVR1' (F9AC6000) |
|---|
| 156 | 0:12.0 'XVR2' (F9AC62E0) |
|---|
| 157 | 0:11.0 'XVR3' (F9AC65C0) |
|---|
| 158 | Bridges found: |
|---|
| 159 | 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9AC1DB0) _PRT |
|---|
| 160 | 0:9.0 class:604 type: 1 Bus 0->1 ACPI: 'P2P0' (F9AC44D8) _PRT |
|---|
| 161 | 0:11.0 class:604 type: 1 Bus 0->2 ACPI: 'XVR3' (F9AC65C0) _PRT |
|---|
| 162 | 0:12.0 class:604 type: 1 Bus 0->3 ACPI: 'XVR2' (F9AC62E0) _PRT |
|---|
| 163 | 0:13.0 class:604 type: 1 Bus 0->4 ACPI: 'XVR1' (F9AC6000) _PRT |
|---|
| 164 | 0:14.0 class:604 type: 1 Bus 0->5 ACPI: 'XVR0' (F9AC5D20) _PRT |
|---|
| 165 | IRQLinks found: |
|---|
| 166 | 0: 'LSMB' (F9AC7F60) P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:1.1 |
|---|
| 167 | A[#20, 21, 22, 23] <- 0:1.1 |
|---|
| 168 | 1: 'LUS0' (F9AC81B8) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:2.0 |
|---|
| 169 | A[ 20,#21, 22, 23] <- 0:2.0 |
|---|
| 170 | 2: 'LUS2' (F9AC8410) P[ 3, 4, 5, 6, 7, 10, 11, 12, 14, 15] <- 0:2.1 |
|---|
| 171 | A[ 20, 21,#22, 23] <- 0:2.1 |
|---|
| 172 | 3: 'LACI' (F9AC88C0) P[] |
|---|
| 173 | A[] |
|---|
| 174 | 4: 'LMCI' (F9AC8B18) P[] |
|---|
| 175 | A[] |
|---|
| 176 | 5: 'LPID' (F9AC8D70) P[] |
|---|
| 177 | A[] |
|---|
| 178 | 6: 'LTID' (F9AC8FC8) P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:7.0 |
|---|
| 179 | A[ 20, 21, 22,#23] <- 0:7.0 |
|---|
| 180 | 7: 'LSI1' (F9AC9220) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 0:8.0 |
|---|
| 181 | A[#20, 21, 22, 23] <- 0:8.0 |
|---|
| 182 | 8: 'LNK4' (F9AC7AB0) P[] |
|---|
| 183 | A[] |
|---|
| 184 | 9: 'LNK1' (F9AC73A8) P[ 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 1:8.0 |
|---|
| 185 | A[#16, 17, 18, 19] <- 1:8.0 |
|---|
| 186 | 10: 'LNK2' (F9AC7600) P[ 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 2:0.0 |
|---|
| 187 | A[ 16,#17, 18, 19] <- 2:0.0 |
|---|
| 188 | 11: 'LNK3' (F9AC7858) P[] |
|---|
| 189 | A[] |
|---|
| 190 | PCI devices found: |
|---|
| 191 | 0:0.0 10DE:5E 'PCI0' |
|---|
| 192 | 0:1.0 10DE:51 'LPC0' |
|---|
| 193 | 0:1.1 10DE:52 'SMB0' IRQs: PCI:10 PIC:'LSMB':10 APIC:'LSMB':20 |
|---|
| 194 | 0:2.0 10DE:5A 'USB0' IRQs: PCI:11 PIC:'LUS0':11 APIC:'LUS0':21 |
|---|
| 195 | 0:2.1 10DE:5B 'USB2' IRQs: PCI:10 PIC:'LUS2': R 10 APIC:'LUS2':22 |
|---|
| 196 | 0:7.0 10DE:54 'SAT0' IRQs: PCI:10 PIC:'LTID':10 APIC:'LTID':23 MSI |
|---|
| 197 | 0:8.0 10DE:55 'SAT1' IRQs: PCI:11 PIC:'LSI1':11 APIC:'LSI1':20 MSI |
|---|
| 198 | 0:9.0 10DE:5C 'P2P0' |
|---|
| 199 | 0:11.0 10DE:5D 'XVR3' |
|---|
| 200 | 0:12.0 10DE:5D 'XVR2' |
|---|
| 201 | 0:13.0 10DE:5D 'XVR1' |
|---|
| 202 | 0:14.0 10DE:5D 'XVR0' |
|---|
| 203 | 0:24.0 1022:1100 |
|---|
| 204 | 0:24.1 1022:1101 |
|---|
| 205 | 0:24.2 1022:1102 |
|---|
| 206 | 0:24.3 1022:1103 |
|---|
| 207 | 1:8.0 1002:515E IRQs: PCI:10 PIC:'LNK1':10 APIC:'LNK1':16 |
|---|
| 208 | 2:0.0 14E4:165A IRQs: PCI:11 PIC:'LNK2':11 APIC:'LNK2':17 MSI |
|---|
| 209 | Bus detected - 5 |
|---|
| 210 | ************ AcpiInstall Power Device Status = 0 |
|---|
| 211 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] |
|---|
| 212 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] |
|---|
| 213 | ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE |
|---|
| 214 | ************ AcpiInstall PMTimer Device Status = 0 |
|---|
| 215 | ** Total use:83368 unuse:3136 count:1427 ** |
|---|
| 216 | Get GpeHdl Status = 0 - AE_OK |
|---|
| 217 | Event [_L00] |
|---|
| 218 | Install GPE0x0 Status 0x0 |
|---|
| 219 | Event [_L05] |
|---|
| 220 | Install GPE0x5 Status 0x0 |
|---|
| 221 | Event [_L0D] |
|---|
| 222 | Install GPE0xD Status 0x0 |
|---|
| 223 | Event [_L11] |
|---|
| 224 | Install GPE0x11 Status 0x0 |
|---|
| 225 | EndScan GPE Status 0 |
|---|
| 226 | ===== Info ======== |
|---|
| 227 | Int Level 9 |
|---|
| 228 | In Xrupt F9ACD548 in arg F9ACD548 |
|---|
| 229 | Node |
|---|
| 230 | Name [_GPE] |
|---|
| 231 | Flags: 0 |
|---|
| 232 | Reg count 4 |
|---|
| 233 | GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 234 | GPE0x5 Flag:0x4 Status - Set 0x0 Enable 0x0 |
|---|
| 235 | GPE0 Status:8020 Enable:8024 EnableWake:1 EnableRun:20 BaseGPENumber:0 |
|---|
| 236 | GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 237 | GPE1 Status:8021 Enable:8025 EnableWake:20 EnableRun:0 BaseGPENumber:8 |
|---|
| 238 | GPE0x11 Flag:0x4 Status - Set 0x0 Enable 0x0 |
|---|
| 239 | GPE2 Status:8022 Enable:8026 EnableWake:0 EnableRun:2 BaseGPENumber:10 |
|---|
| 240 | GPE3 Status:8023 Enable:8027 EnableWake:0 EnableRun:0 BaseGPENumber:18 |
|---|
| 241 | =========== Status 0x0 0 |
|---|
| 242 | AcpiOsDerivePCIID([PCI0] ,[SMCF],) Bus:0 Dev:1 Fun:1 - Derive: Bus:0 Dev:1 Fun:1 |
|---|
| 243 | AcpiOsExecute type:1 |
|---|
| 244 | AcpiOsExecute - direct executing |
|---|
| 245 | *** System Notify *** |
|---|
| 246 | Dev: [PWRB] Value:2 |
|---|
| 247 | ************ Leave Sleep Status = 0x0 - AE_OK |
|---|
| 248 | FindPCIDevice |
|---|
| 249 | Need: B:0 D:7 F:0 |
|---|
| 250 | Finding APIC23 PIC10 Dev: [SAT0] |
|---|
| 251 | FindPCIDevice |
|---|
| 252 | Need: B:0 D:8 F:0 |
|---|
| 253 | Finding APIC20 PIC11 Dev: [SAT1] |
|---|
| 254 | |
|---|
