Ticket #197: acp_apic1.log

File acp_apic1.log, 11.4 KB (added by Chuck McKinnis, 17 years ago)
Line 
1AllocIRQMem at 0xFFE88000 (24576 bytes)
2
3PSD_install options:" /O1 /R /APIC /SMP" @#netlabs dot org:3.6a#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Feb 13 2008 12:27:51
4MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
5New Stack = FFD00000 Size:0x8000
6PSD_INIT ESP=0xFFCFFFE0
7AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
8AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
9AcpiOsCreateLock 8
10AcpiOsCreateLock 0
11AcpiOsPredefinedOverride: "_REV"
12AcpiOsPredefinedOverride: "_OS_"
13AcpiOsPredefinedOverride: override to eComStation
14AcpiOsPredefinedOverride: "_GL_"
15AcpiOsCreateSemaphore: O.K. Handle=0xF96C03F8 M:1 I:0
16AcpiOsPredefinedOverride: "_OSI"
17AcpiOsPredefinedOverride: override to eCS
18*** AcpiInitializeSubsystem Status = 0 ***
19ACPI: RSDP @ 0xFDFE0/0x14 (v0 IBM )
20ACPI: RSDT @ 0x3FFF6640/0x2C (v1 IBM CDTPWSPL 0x1010 IBM 0x0)
21ACPI: FACP @ 0x3FFF65C0/0x74 (v1 IBM CDTPWSPL 0x1010 IBM 0x0)
22ACPI: DSDT @ 0x3FFF29C0/0x3726 (v1 IBM CDTPWSPL 0x1000 MSFT 0x1000007)
23ACPI: FACS @ 0x3FFFE680/0x40
24ACPI: APIC @ 0x3FFF6540/0x62 (v1 IBM CDTPWSPL 0x1010 IBM 0x0)
25*** AcpiInitializeTables Status = 0 ***
26AcpiOsTableOverride Ex:FFE839C0 New:FFCFFFAC SIG:[DSDT]
27tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired
28*** AcpiLoadTables Status = 0 ***
29Table [DSDT]
30Table [FACS]
31Table [FACP]
32Table [APIC]
33Local APIC address: FEE00000h
34System also has 8259
35APIC_PROCESSOR: ProcID 0h LocalApicID 1h - usable
36APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable
37APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
39APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
40APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
41Size of FACDT 244
42Type of computer - Unspecified
43System vector the SCI interrupt is wired to in 8259 mode. 9
44System port address of the SMI Command Port 0xB2
45The value to write to SMI_CMD to disable SMI 0xF0
46The value to write to SMI_CMD to re-enable SMI 0xF1
47The value to write to SMI_CMD to enter the S4BIOS state 0x0
48System port address of the PM1a Event Register Block F800
49System port address of the PM1b Event Register Block 0
50Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
51System port address of the PM1a Control Register Block F804
52System port address of the PM1b Control Register Block 0
53Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
54System port address of the PM2 Control Register Block 0
55System port address of the Power Management Timer Control Register Block F808
56Number of bytes decoded by PM_TMR_BLK (=4) 4
57System port address of General-Purpose Event 0 Register Block F828
58System port address of General-Purpose Event 1 Register Block F82C
59Number of bytes decoded by GPE0_BLK 0x4
60Number of bytes decoded by GPE1_BLK 0x4
61Offset within the ACPI general-purpose event model where GPE1 based events start 10
62GPE enable register: 0: 0
63GPE status register: 0: 0
64The system does not support a C2 state. 65
65The system does not support a C3 state 3E9
66The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
67The bit width of the processor's duty cycle setting value in the P_CNT register 3
68The RTC CMOS RAM index to the day-of-month alarm value 13
69IA-PC Boot Architecture Flags 0x0
70Fixed feature flags A5
71The reset register:
72Type of address space - System Memory
73Register Bit Width 0
74Register Bit Offset 0
75Access size 0
76Address 0
77The value to write to the RESET_REG port to reset the system 0
78***** Throttl Width 3 Offset 1
79evxfevnt-176 [2] Enable: Transition to ACPI mode successful
80evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to F [_GPE] 2 regs on int 0x9
81evgpeblk-1111 [4] EvCreateGpeBlock: GPE 10 to 1F [_GPE] 2 regs on int 0x9
82AcpiOsInstallIntterrupHandler IRQ9 handler F96FEA2D
83evgpeblk-1211 [3] EvInitializeGpeBlock: Found 2 Wake, Enabled 0 Runtime GPEs in this block
84evgpeblk-1211 [3] EvInitializeGpeBlock: Found 1 Wake, Enabled 0 Runtime GPEs in this block
85************ AcpiEnableSubsystem Status = 0
86AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
87AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:2 - Derive: Bus:0 Dev:31 Fun:2
88AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:3 - Derive: Bus:0 Dev:31 Fun:3
89AcpiOsDerivePCIID([PCI0] ,[CFG2],) Bus:0 Dev:31 Fun:5 - Derive: Bus:0 Dev:31 Fun:5
90************ Scan EC Status = 0
91Completing Region/Field/Buffer/Package initialization:..............................................................................
92Initialized 10/16 Regions 31/31 Fields 27/27 Buffers 10/14 Packages (424 nodes)
93Initializing Device/Processor/Thermal objects by executing _INI methods:AcpiOsDerivePCIID([PCI0] ,[MCHX],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
94....
95Executed 4 _INI methods requiring 3 _STA executions (examined 44 objects)
96************ AcpiInitializeObjects mask:0 Status = 0
97Processor [CPU0]
98Processor [CPU1]
99Status 0x0 0
100************ AcpiInstallNotifyHandler System Status = 0
101************ AcpiInstallNotifyHandler Device Status = 0
102
103Init ACPI rc=0
104APIC0 phys FEC00000 lin: FFDEE000 APIC ID 2000000 (170020) Ver 20 MaxIO entry 0x17 (4000000) Arbitration ID 4 set to (2000000) 2 Id (2000000) 2
105Set 24 lines from IRQ0
106=========== Status set APIC mode 0x0
107Current IRQs line 24
108IRQ0 override to IRQ2 Vector:50 Line:2
109IRQ9 override to IRQ9 Vector:71 Line:9
110WakeupVector Lin: FFDED000
111WakeupVector Lin: FFDED000 Phys: 6E000 IPIStack:FFDEB000 s_cpu:0
112GetWakeupVector Status = 0
113PIC Mask:FFFFDFFB
114PSD_GET_NUM_OF_PROCS - has 2 CPU
115ProcInit CPU0
116LApic ID:0x1000000: ver 0x40011
117Max LVT=5
118Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
119Status Evaluate Processor 0x0 AE_OK
120Usable:2 Counter:0
121 CPU id to N:0
122 ProcId: 0x0
123 P_BLK: 0xF810
124 P_BLK len: 0x6
125CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND
126End init CPU0 rc:0
127StartProcessor: CPU1 id 1
128StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFDED000, BootCode.Phys:0x6E000
129StartProcessor 1 id:1 LAPICid:0
130Wait INI App Proc
131Send SIPI1
132StartProcessor success SIPI1
133ProcInit CPU1
134LApic ID:0x0: ver 0x40011
135Max LVT=5
136End Startup code
137Set HLT duration as IOdelay:0xF9
138Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
139Status Evaluate Processor 0x0 AE_OK
140Usable:2 Counter:1
141 CPU id to N:1
142 ProcId: 0x1
143 P_BLK: 0xF810
144 P_BLK len: 0x6
145CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND
146End init CPU1 rc:0
147UNMASK PIC IRQ8 mask 0xFFFFDEFB Real:FFEBB8F4
148OemHlpXPSDFree: at 0xF9C00000 success!
149Handler: ACPI.CFG opened: Size is 2010 bytes
150OemHlpXHandler: ACPI.CFG read: 2010 bytes
151OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD3A33EC
152Found bridge "PCI0" BBN is absent status:5
153Finding:0 bridges
1540:0.0 Class:600 Hdr:0 Bridge H->0
1550:1.0 Class:604 Hdr:1 Bridge 0->1
1560:30.0 Class:604 Hdr:1 Bridge 0->2
1570:31.0 Class:601 Hdr:80
1580:31.1 Class:101 Hdr:0
1590:31.2 Class:C03 Hdr:0
1600:31.3 Class:C05 Hdr:0
1610:31.5 Class:401 Hdr:0
1621:0.0 Class:300 Hdr:80
1631:0.1 Class:380 Hdr:0
1642:3.0 Class:200 Hdr:0
165PCI Bus scan: 3 PCI buses found.
166Scan ACPI tree for PCI functions
1670:0.0 'PCI0' (F96C16B0)
1680:1.0 'AGPC' (F96C1D18)
1690:31.1 'PIDE' (F96C2948)
1700:31.0 'ISA_' (F96C4A78)
1710:31.2 'USB0' (F96C4C90)
1720:31.3 'SMB0' (F96C4EB0)
1730:31.5 'AUD0' (F96C5048)
1740:31.6 'AUD1' (F96C51E0)
1750:30.0 'PCI2' (F96C5378)
176Bridges found:
1770:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F96C16B0) _PRT
1780:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGPC' (F96C1D18) _PRT
1790:30.0 class:604 type: 1 Bus 0->2 ACPI: 'PCI2' (F96C5378) _PRT
180IRQLinks found:
1810: 'PIN1' (F96C1DE8) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 1:0.0
182 A[]
1831: 'PIN2' (F96C20C0) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 0:31.5 0:31.3
184 A[]
1852: 'PIN3' (F96C2318) P[]
186 A[]
1873: 'PIN4' (F96C2570) P[ 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15] <- 2:3.0 0:31.2
188 A[]
189PCI devices found:
1900:0.0 8086:1A21 'PCI0'
1910:1.0 8086:1A23 'AGPC'
1920:30.0 8086:2418 'PCI2'
1930:31.0 8086:2410 'ISA_'
1940:31.1 8086:2411 'PIDE'
1950:31.2 8086:2412 'USB0' IRQs: PCI:10 PIC:'PIN4': R 10 APIC:19 Apic Set: 19
1960:31.3 8086:2413 'SMB0' IRQs: PCI:9 PIC:'PIN2': R 9 APIC:17 Apic Set: 17
1970:31.5 8086:2415 'AUD0' IRQs: PCI:9 PIC:'PIN2': R 9 APIC:17 Apic Set: 17
1981:0.0 1002:4966 IRQs: PCI:11 PIC:'PIN1': R 11 APIC:16 Apic Set: 16
1991:0.1 1002:496E
2002:3.0 8086:1229 IRQs: PCI:10 PIC:'PIN4': R 10 APIC:19 Apic Set: 19
201Max IRQ number in use - 19
202Bus detected - 2
203UNMASK PIC IRQ9 mask 0xFFFFDCFB Real:FFEBB8F4
204** Create resource, max = 31 **
205OemHlpXHandler: ACPI_START_EVENTS 3
206************ AcpiInstall Power Device Status = 0
207ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080123]
208ACPI Warning (evxface-235): Could not enable fixed event 3 [20080123]
209************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
210************ AcpiInstall PMTimer Device Status = 0
211** Total use:85104 unuse:10216 count:1420 **
212Get GpeHdl Status = 0 - AE_OK
213Event [_L1C]
214Install GPE0x1C Status 0x0
215EndScan GPE Status 0
216===== Info ========
217Int Level 9
218In Xrupt F96CBD20 in arg F96CBD20
219 Node
220Name [_GPE]
221Flags: 0
222Reg count 2
223GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
224GPE0 Status:F828 Enable:F82A EnableWake:8 EnableRun:0 BaseGPENumber:0
225GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
226GPE1 Status:F829 Enable:F82B EnableWake:8 EnableRun:0 BaseGPENumber:8
227===== Info ========
228Int Level 9
229In Xrupt F96CBD20 in arg F96CBE98
230 Node
231Name [_GPE]
232Flags: 0
233Reg count 2
234GPE0 Status:F82C Enable:F82E EnableWake:0 EnableRun:0 BaseGPENumber:10
235GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
236GPE1 Status:F82D Enable:F82F EnableWake:0 EnableRun:0 BaseGPENumber:18
237=========== Status 0x0 0
238************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
239OemHlpXHandler: ACPI_START_EVENTS 4
240OemHlpXHandler: CallACPI16: 47008DF, CallACPI32: F96D5482, ExportTable32: F9C101CC
241UNMASK PIC IRQ1 mask 0xFFFFDCF9 Real:FFEBB8F4
242IRQMask SetVirtualWireMode
243SetVirtualWireMode Apic 0 PIC 0 PCI:20200 PICMask:DCF9 IRQs:20
244UNMASK APIC IRQ19 mask 0xFFF7DCF9
245APIC MASK IRQ19
246UNMASK PIC IRQ6 mask 0xFFFFDCB9 Real:FFEBB8F4
247FindPCIDevice
248 Need: B:0 D:1F F:1
249UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
250UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
251UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
252UNMASK PIC IRQ14 mask 0xFFFF9CB9 Real:FFEBB8F4
253UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
254UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
255UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
256UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
257UNMASK PIC IRQ14 mask 0xFFFF1CB9 Real:FFEBB8F4
258UNMASK PIC IRQ15 mask 0xFFFF1CB9 Real:FFEBB8F4
259APM: PSD find success. PSD Ftable:F9C101D0
260Register Notify 1st FFCF51CE
261UNMASK PIC IRQ6 mask 0xFFFF1CB9 Real:FFEBB8F4
262UNMASK PIC IRQ1 mask 0xFFFF1CB9 Real:FFEBB8F4
263UNMASK PIC IRQ12 mask 0xFFFF0CB9 Real:FFEBB8F4
264UNMASK APIC IRQ17 mask 0xFFFD0CF9
265UNMASK APIC switch ACPI IRQ1
266UNMASK APIC IRQ19 mask 0xFFF50CF9
267OemHlpXHandler: CMD_INIT_COMPLETE
268PSD_SET_ADV_INT_MODE Apic 0 PIC 0
269Dummy 7 IDT FFDBF370 Vector 57
270Dummy 2C IDT FFDBF370 Vector F3
271Dummy 2F IDT FFDBF370 Vector F2
272Dummy 2E IDT FFDBF370 Vector 2E
273UNMASK APIC IRQ0 mask 0xFFF52CFC
274UNMASK APIC IRQ19 mask 0xFFF52CFC
275******** Event tread ***************
276APM: Setting suspend state:1
277Button KernBlock 4294967295 timeout
278UNMASK APIC IRQ6 mask 0xFFF52CBC
279APIC MASK IRQ6