Ticket #187: acpi2.log

File acpi2.log, 11.0 KB (added by Chuck McKinnis, 16 years ago)
Line 
1AllocIRQMem at 0xFFE84000 (24576 bytes)
2@#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40
3MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
4New Stack = FFD00000 Size:0x8000
5AcpiOsInitialize ALLOC size 65536 at 0xF96B0000
6AcpiOsInitialize MapMem size 4096 at 0xFFE9A000
7AcpiOsCreateLock 8
8AcpiOsCreateLock 8
9AcpiOsPredefinedOverride: "_REV"
10AcpiOsPredefinedOverride: "_OS_"
11AcpiOsPredefinedOverride: override to eComStation
12AcpiOsPredefinedOverride: "_GL_"
13AcpiOsCreateSemaphore: O.K. Handle=0xF96B03F8 M:1 I:0
14AcpiOsPredefinedOverride: "_OSI"
15AcpiOsPredefinedOverride: override to eCS
16*** AcpiInitializeSubsystem Status = 0 ***
17ACPI: RSDP @ 0xF01A0/0x14 (v0 TOSHIB)
18ACPI: RSDT @ 0x7F730000/0x50 (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
19ACPI: FACP @ 0x7F73007C/0x84 (v2 TOSHIB A0054    0x20070816 TASM 0x4010000)
20ACPI: DSDT @ 0x7F730100/0x6546 (v2 TOSHIB A0054    0x20070816 MSFT 0x3000000)
21ACPI: FACS @ 0xEEE00/0x40
22ACPI: SSDT @ 0x7F736646/0x506 (v2 TOSHIB A0054    0x20061102 MSFT 0x3000000)
23ACPI: BOOT @ 0x7F730054/0x28 (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
24ACPI: APIC @ 0x7F736FE2/0x68 (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
25ACPI: MCFG @ 0x7F73704A/0x3C (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
26ACPI: HPET @ 0x7F7370BA/0x38 (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
27ACPI: TCPA @ 0x7F737268/0x32 (v2 TOSHIB A0054    0x20070816 TASM 0x4010000)
28ACPI: SLIC @ 0x7F7370F2/0x176 (v1 TOSHIB A0054    0x20070816 TASM 0x4010000)
29ACPI: SSDT @ 0x7F737D39/0x5E1 (v2 TOSHIB A0054    0x20061220 MSFT 0x3000000)
30ACPI: SSDT @ 0x7F73729A/0x76 (v2 TOSHIB A0054    0x20051021 MSFT 0x3000000)
31ACPI: SSDT @ 0x7F737310/0xA29 (v2 TOSHIB A0054    0x20061226 MSFT 0x3000000)
32*** AcpiInitializeTables Status = 0 ***
33AcpiOsTableOverride Ex:FFD14100 New:FFCFFFC4 SIG:[DSDT]
34AcpiOsCreateSemaphore: O.K. Handle=0xF96A27C0 M:FFFFFFFF I:0
35*** AcpiLoadTables Status = 0 ***
36Table [DSDT]
37Table [FACS]
38Table [FACP]
39Table [SSDT]
40Table [BOOT]
41Table [APIC]
42Local APIC address: FEE00000h
43System also has 8259
44APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
45APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
46APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
47APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
48APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
49APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
50APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
51Table [MCFG]
52Table [HPET]
53Table [TCPA]
54Table [SLIC]
55Table [SSDT]
56Table [SSDT]
57Table [SSDT]
58Size of FACDT 244
59Type of computer - Mobile
60System vector the SCI interrupt is wired to in 8259 mode. 9
61System port address of the SMI Command Port 0xB2
62The value to write to SMI_CMD to disable SMI   0x71
63The value to write to SMI_CMD to re-enable SMI 0x70
64The value to write to SMI_CMD to enter the S4BIOS state 0x0
65The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x83
66System port address of the PM1a Event Register Block D800
67System port address of the PM1b Event Register Block 0
68Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
69System port address of the PM1a Control Register Block D804
70System port address of the PM1b Control Register Block 0
71Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
72System port address of the PM2 Control Register Block D820
73Number of bytes decoded by PM2_CNT_BLK 1
74System port address of the Power Management Timer Control Register Block D808
75Number of bytes decoded by PM_TMR_BLK (=4) 4
76System port address of General-Purpose Event 0 Register Block D828
77System port address of General-Purpose Event 1 Register Block 0
78Number of bytes decoded by GPE0_BLK 0x8
79Number of bytes decoded by GPE1_BLK 0x0
80Offset within the ACPI general-purpose event model where GPE1 based events start 0
81GPE enable register: 0: 0: 0: 0
82GPE status register: 0: 80: C1: 2D
83The system does not support a C2 state. 7FFF
84The system does not support a C3 state 7FFF
85The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
86The RTC CMOS RAM index to the day-of-month alarm value 13
87The RTC CMOS RAM index to the month of year alarm value 126
88IA-PC Boot Architecture Flags 0x3
89Fixed feature flags 84A5
90The reset register:
91Type of address space - System I/O
92Register Bit Width  8
93Register Bit Offset 0
94Access size 0
95Address 178
96The value to write to the RESET_REG port to reset the system FE
97***** Throttl Width 0 Offset 1
98AcpiOsInstallIntterrupHandler IRQ9 handler F96F0F09
99************ AcpiEnableSubsystem Status = 0
100AcpiOsDerivePCIID([PCI0] ,[ICH3],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
101AcpiOsDerivePCIID([PCI0] ,[PEXB],) Bus:0 Dev:28 Fun:1 - Derive: Bus:0 Dev:28 Fun:1
102************ Scan EC Status = 0
103AcpiOsDerivePCIID([PCI0] ,[IGDR],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
104AcpiOsDerivePCIID([PCI0] ,[IGDP],) Bus:0 Dev:2 Fun:0 - Derive: Bus:0 Dev:2 Fun:0
105************ AcpiInitializeObjects mask:0 Status = 0
106Processor [CPU0]
107Processor [CPU1]
108Status 0x0 0
109************ AcpiInstallNotifyHandler System Status = 0
110************ AcpiInstallNotifyHandler Device Status = 0
111PSDFree: at 0xF96C0000 success!
112Finding:0 bridges
1130:0.0  Class:600  Hdr:0   Bridge H->0
1140:2.0  Class:300  Hdr:80
1150:2.1  Class:380  Hdr:80
1160:25.0  Class:200  Hdr:0
1170:26.0  Class:C03  Hdr:80
1180:26.1  Class:C03  Hdr:0
1190:26.7  Class:C03  Hdr:0
1200:27.0  Class:403  Hdr:0
1210:28.0  Class:604  Hdr:81   Bridge 0->1
1220:28.1  Class:604  Hdr:81   Bridge 0->2..3
1230:28.2  Class:604  Hdr:81   Bridge 0->4
1240:29.0  Class:C03  Hdr:80
1250:29.1  Class:C03  Hdr:0
1260:29.2  Class:C03  Hdr:0
1270:29.7  Class:C03  Hdr:0
1280:30.0  Class:604  Hdr:1   Bridge 0->5..6
1290:31.0  Class:601  Hdr:80
1300:31.1  Class:101  Hdr:0
1310:31.2  Class:106  Hdr:0
1321:0.0  Class:280  Hdr:0
1335:11.0  Class:607  Hdr:82   Bridge 5->6
1345:11.2  Class:180  Hdr:80
1355:11.3  Class:805  Hdr:80
136PCI Bus scan: 7 PCI buses found.
137Scan ACPI tree for PCI functions
1380:0.0  'PCI0' (F96B4B80)
1390:30.0  'PCIB' (F96B4E40)
1405:11.0  'CRD0' (F96B5240)
1415:11.3  'SDC_' (F96B54A8)
1425:11.1  'IEEE' (F96B5558)
1430:31.0  'FNC0' (F96B5660)
1440:31.1  'FNC1' (F96B7F10)
1450:31.2  'FNC2' (F96B7FC0)
1460:2.0  'VGA_' (F96B8070)
1470:29.0  'USB1' (F96B9D58)
1480:29.1  'USB2' (F96B9FC0)
1490:29.2  'USB3' (F96BA168)
1500:26.0  'USB4' (F96BA460)
1510:26.1  'USB5' (F96BA7A0)
1520:29.7  'EHC1' (F96BA900)
1530:26.7  'EHC2' (F96BABB0)
1540:27.0  'AZAL' (F96BE718)
1550:28.0  'MPEX' (F96BE9C0)
1561:0.0  'WLAN' (F96BEC70)
1570:28.1  'EXCB' (F96BECC0)
1582:0.0  'EXCD' (F96BF070)
1590:28.2  'PEX3' (F96BF1A8)
1600:25.0  'LAN_' (F96BF458)
161Bridges found:
1620:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F96B4B80) _PRT
1630:28.0  class:604  type: 1  Bus 0->1  ACPI: 'MPEX' (F96BE9C0) _PRT
1640:28.1  class:604  type: 1  Bus 0->2  ACPI: 'EXCB' (F96BECC0) _PRT
1650:28.2  class:604  type: 1  Bus 0->4  ACPI: 'PEX3' (F96BF1A8) _PRT
1660:30.0  class:604  type: 1  Bus 0->5  ACPI: 'PCIB' (F96B4E40) _PRT
1675:11.0  class:607  type: 2  Bus 5->6  ACPI: 'CRD0' (F96B5240)
168IRQLinks found:
1690: 'LNKA' (F96B0CA0)  P[*10] <- 1:0.0 0:26.0 0:2.0
170                       A[]
1711: 'LNKE' (F96B16D8)  P[ 3, 4, 5, 6, 7,*11] <- 5:11.0 0:25.0
172                       A[]
1732: 'LNKB' (F96B0FD0)  P[ 3, 4, 5, 6, 7,*11] <- 0:26.1
174                       A[]
1753: 'LNKC' (F96B1228)  P[ 3, 4, 5, 6, 7,*11] <- 0:29.2 0:26.7
176                       A[]
1774: 'LNKG' (F96B1B88)  P[ 3, 4, 5, 6, 7,*11] <- 0:27.0
178                       A[]
1795: 'LNKH' (F96B1DE0)  P[ 3, 4, 5, 6, 7,*11] <- 5:11.3 5:11.2 0:29.7 0:29.0
180                       A[]
1816: 'LNKD' (F96B1480)  P[ 3, 4, 5, 6, 7,*11] <- 0:31.2 0:31.1 0:29.1
182                       A[]
1837: 'LNKF' (F96B1930)  P[]
184                       A[]
185PCI devices found:
1860:0.0  8086:2A00  'PCI0'
1870:2.0  8086:2A02  'VGA_'  IRQs: PCI:10 PIC:'LNKA':10 APIC:16 MSI
1880:2.1  8086:2A03       
1890:25.0  8086:104D  'LAN_'  IRQs: PCI:11 PIC:'LNKE':11 APIC:20 MSI
1900:26.0  8086:2834  'USB4'  IRQs: PCI:10 PIC:'LNKA':10 APIC:16
1910:26.1  8086:2835  'USB5'  IRQs: PCI:11 PIC:'LNKB':11 APIC:17
1920:26.7  8086:283A  'EHC2'  IRQs: PCI:11 PIC:'LNKC':11 APIC:18
1930:27.0  8086:284B  'AZAL'  IRQs: PCI:11 PIC:'LNKG':11 APIC:22 MSI
1940:28.0  8086:283F  'MPEX'
1950:28.1  8086:2841  'EXCB'
1960:28.2  8086:2843  'PEX3'
1970:29.0  8086:2830  'USB1'  IRQs: PCI:11 PIC:'LNKH':11 APIC:23
1980:29.1  8086:2831  'USB2'  IRQs: PCI:11 PIC:'LNKD':11 APIC:19
1990:29.2  8086:2832  'USB3'  IRQs: PCI:11 PIC:'LNKC':11 APIC:18
2000:29.7  8086:2836  'EHC1'  IRQs: PCI:11 PIC:'LNKH':11 APIC:23
2010:30.0  8086:2448  'PCIB'
2020:31.0  8086:2815  'FNC0'
2030:31.1  8086:2850  'FNC1'  IRQs: PCI:11 PIC:'LNKD':11 APIC:19
2040:31.2  8086:2829  'FNC2'  IRQs: PCI:11 PIC:'LNKD':11 APIC:19 MSI
2051:0.0  8086:4229  'WLAN'  IRQs: PCI:10 PIC:'LNKA':10 APIC:16 MSI
2065:11.0  104C:8039  'CRD0'  IRQs: PCI:0 PIC:'LNKE':11 APIC:20
2075:11.2  104C:803B          IRQs: PCI:11 PIC:'LNKH':11 APIC:23
2085:11.3  104C:803C  'SDC_'  IRQs: PCI:11 PIC:'LNKH':11 APIC:23
209Bus detected - 6
210************ AcpiInstall Power Device Status = 0
211ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
212ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
213************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
214************ AcpiInstall PMTimer Device Status = 0
215** Total use:149400 unuse:11696 count:2527 **
216Get GpeHdl Status = 0 - AE_OK
217Event [_L01]
218Install GPE0x1  Status 0x0
219Event [_L03]
220Install GPE0x3  Status 0x0
221Event [_L04]
222Install GPE0x4  Status 0x0
223Event [_L05]
224Install GPE0x5  Status 0x0
225Event [_L08]
226Install GPE0x8  Status 0x0
227Event [_L09]
228Install GPE0x9  Status 0x0
229Event [_L0B]
230Install GPE0xB  Status 0x0
231Event [_L0C]
232Install GPE0xC  Status 0x0
233Event [_L0D]
234Install GPE0xD  Status 0x0
235Event [_L0E]
236Install GPE0xE  Status 0x0
237Event [_L11]
238Install GPE0x11  Status 0x0
239Event [_L06]
240Install GPE0x6  Status 0x0
241EndScan GPE Status 0
242===== Info ========
243Int Level 9
244In Xrupt F96AE708 in arg F96AE708
245      Node
246Name [_GPE]
247Flags: 0
248Reg count 4
249GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0
250GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
251GPE0x4 Flag:0x4 Status - Set 0x0 Enable 0x0
252GPE0x5 Flag:0x4 Status - Set 0x0 Enable 0x0
253GPE0x6 Flag:0x4 Status - Set 0x0 Enable 0x0
254GPE0 Status:D828 Enable:D82C EnableWake:8 EnableRun:72 BaseGPENumber:0
255GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
256GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0
257GPE0xB Flag:0x4 Status - Set 0x0 Enable 0x0
258GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
259GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
260GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0
261GPE1 Status:D829 Enable:D82D EnableWake:73 EnableRun:8 BaseGPENumber:8
262GPE0x11 Flag:0x2 Status - Set 0x0 Enable 0x0
263GPE2 Status:D82A Enable:D82E EnableWake:2 EnableRun:0 BaseGPENumber:10
264GPE3 Status:D82B Enable:D82F EnableWake:0 EnableRun:0 BaseGPENumber:18
265=========== Status 0x0 0
266************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
267FindPCIDevice
268 Need: B:0 D:1F F:1
269Finding APIC19 PIC11 Dev: [FNC1]
270FindPCIDevice
271 Need: B:0 D:1F F:2
272Finding APIC19 PIC11 Dev: [FNC2]