Ticket #180: pci_104_rem_psd.log

File pci_104_rem_psd.log, 15.5 KB (added by Chuck McKinnis, 17 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version 664 of this file; 15-01-2008 (D-M-Y)."
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 5
6PCI Characteristics : Config Mechanism 1 Special Cycle Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2531h 82860 (860) CPU to I/O Hub Bridge (Interface A)
13 Command 0146h (Memory Access, BusMaster, Parity Error Response, System Errors)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15 Received Master Abort, Fast Timing)
16 Revision 04h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 1274103Ch Unknown
20 Subsystem Vendor 103Ch Hewlett-Packard Company
21 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F8000000h..FBFFFFFFh
22 New Capabilities List Present:
23 AGP Capability, Version 2.0 (AGP 4x and below support)
24 AGP Speed(s) Supported : 1x 2x 4x
25 FW Transfers Supported : Yes
26 >4GiB Address Space Supported : No
27 Sideband Addressing Supported : Yes
28 Maximum Command Queue Length : 32 bytes
29 AGP Speed Selected : 4x
30 FW Transfers Enabled : No
31 >4GiB Address Space Enabled : No
32 AGP Enabled : Yes
33 Sideband Addressing Enabled : Yes
34 Current Command Queue Length : 1 byte
35
36 Bus 0 (PCI), Device Number 1, Device Function 0
37 Vendor 8086h Intel Corporation
38 Device 2532h 82850E/82860 AGP Bridge (A3-step)
39 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
40 Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
41 Revision 04h, Header Type 01h, Bus Latency Timer 60h
42 Self test 00h (Self test not supported)
43 PCI Class Bridge, type PCI to PCI
44 PCI Bridge Information:
45 Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
46 Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
47 Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
48 Received Master Abort, Medium Timing)
49 Secondary Bus Latency 00h
50 I/O Port Range Passed to Secondary Bus : None
51 Memory Range Passed to Secondary Bus : F4000000h..F48FFFFFh
52 Prefetchable Memory Range Passed to Secondary Bus : F6000000h..F7FFFFFFh
53
54 Bus 0 (PCI), Device Number 2, Device Function 0
55 Vendor 8086h Intel Corporation
56 Device 2533h 82860 (860) PCI Bridge (Hub Interface B)
57 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
58 Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
59 Revision 04h, Header Type 01h, Bus Latency Timer 20h
60 Self test 00h (Self test not supported)
61 PCI Class Bridge, type PCI to PCI
62 PCI Bridge Information:
63 Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 3
64 Secondary Bus Command 0004h (ISA mapping)
65 Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
66 Received Master Abort, Medium Timing)
67 Secondary Bus Latency 00h
68 I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
69 Memory Range Passed to Secondary Bus : F4900000h..F49FFFFFh
70 Prefetchable Memory Range Passed to Secondary Bus : None
71
72 Bus 0 (PCI), Device Number 30, Device Function 0
73 Vendor 8086h Intel Corporation
74 Device 244Eh 82801BA Hub Interface to PCI Bridge (ICH2 B4 step)
75 Command 0147h (I/O Access, Memory Access, BusMaster, Parity Error Response,
76 System Errors)
77 Status 0080h (Supports Back-To-Back Trans., Fast Timing)
78 Revision 04h, Header Type 01h, Bus Latency Timer 00h
79 Self test 00h (Self test not supported)
80 PCI Class Bridge, type PCI to PCI
81 PCI Bridge Information:
82 Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
83 Secondary Bus Command 0004h (ISA mapping)
84 Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
85 Received Master Abort, Medium Timing)
86 Secondary Bus Latency 00h
87 I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
88 Memory Range Passed to Secondary Bus : F4A00000h..F4BFFFFFh
89 Prefetchable Memory Range Passed to Secondary Bus : None
90
91 Bus 0 (PCI), Device Number 31, Device Function 0
92 Vendor 8086h Intel Corporation
93 Device 2440h 82801BA LPC Interface (ICH2 B4 step)
94 Command 010Fh (I/O Access, Memory Access, BusMaster, Special Cycles,
95 System Errors)
96 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
97 Revision 04h, Header Type 80h, Bus Latency Timer 00h
98 Self test 00h (Self test not supported)
99 PCI Class Bridge, type PCI to ISA
100
101 Bus 0 (PCI), Device Number 31, Device Function 1
102 Vendor 8086h Intel Corporation
103 Device 244Bh 82801BA UltraATA/100 IDE Controller (ICH2 B4 step)
104 Command 0000h (Bus Access Disabled!!)
105 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
106 Revision 04h, Header Type 00h, Bus Latency Timer 00h
107 Self test 00h (Self test not supported)
108 PCI Class Storage, type IDE (ATA)
109 PCI EIDE Controller Features :
110 BusMaster EIDE is supported
111 Primary Channel is disabled
112 Secondary Channel is disabled
113 Subsystem ID 1274103Ch Unknown
114 Subsystem Vendor 103Ch Hewlett-Packard Company
115 Address 0 is not present or not configured!
116 Address 1 is not present or not configured!
117 Address 2 is not present or not configured!
118 Address 3 is not present or not configured!
119 Address 4 is an I/O Port : 10A0h..10AFh
120
121 Bus 0 (PCI), Device Number 31, Device Function 2
122 Vendor 8086h Intel Corporation
123 Device 2442h 82801BA/BAM USB Controller #1 (ICH2/ICH2-M B4 step)
124 Command 0005h (I/O Access, BusMaster)
125 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
126 Revision 04h, Header Type 00h, Bus Latency Timer 00h
127 Self test 00h (Self test not supported)
128 PCI Class Serial, type USB (UHCI)
129 Subsystem ID 1274103Ch Unknown
130 Subsystem Vendor 103Ch Hewlett-Packard Company
131 Address 0 is not present or not configured!
132 Address 1 is not present or not configured!
133 Address 2 is not present or not configured!
134 Address 3 is not present or not configured!
135 Address 4 is an I/O Port : 1080h..109Fh
136 System IRQ 15, INT# D
137
138 Bus 0 (PCI), Device Number 31, Device Function 3
139 Vendor 8086h Intel Corporation
140 Device 2443h 82801BA/BAM SMBus Controller (ICH2/ICH2-M B4 step)
141 Command 0001h (I/O Access)
142 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
143 Revision 04h, Header Type 00h, Bus Latency Timer 00h
144 Self test 00h (Self test not supported)
145 PCI Class Serial, type SMBus Controller
146 Subsystem ID 1274103Ch Unknown
147 Subsystem Vendor 103Ch Hewlett-Packard Company
148 Address 0 is not present or not configured!
149 Address 1 is not present or not configured!
150 Address 2 is not present or not configured!
151 Address 3 is not present or not configured!
152 Address 4 is an I/O Port : 10B0h..10BFh
153 System IRQ 11, INT# B
154
155 Bus 1 (AGP), Device Number 0, Device Function 0
156 Vendor 102Bh Matrox Graphics Inc
157 Device 2527h MGA-G550 Chipset
158 Command 0007h (I/O Access, Memory Access, BusMaster)
159 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
160 Medium Timing)
161 Revision 01h, Header Type 00h, Bus Latency Timer 80h
162 Minimum Bus Grant 10h, Maximum Bus Latency 20h
163 Self test 00h (Self test not supported)
164 Cache line size 32 Bytes (8 DWords)
165 PCI Class Display, type VGA
166 Subsystem ID 1E41102Bh Millennium G550 Dual-DVI DDR
167 Subsystem Vendor 102Bh Matrox Graphics Inc
168 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F6000000h..F7FFFFFFh
169 Address 1 is a Memory Address (0-4GiB) : F4800000h..F4803FFFh
170 Address 2 is a Memory Address (0-4GiB) : F4000000h..F47FFFFFh
171 System IRQ 10, INT# A
172 Expansion ROM of 128 KiB decoded by this card, currently disabled
173 New Capabilities List Present:
174 Power Management Capability, Version 1.1
175 Does not support low power State D1 or D2
176 Does not support PME# signalling
177 Current Power State : D0 (Device operational, no power saving)
178 AGP Capability, Version 2.0 (AGP 4x and below support)
179 AGP Speed(s) Supported : 1x 2x 4x
180 FW Transfers Supported : No
181 >4GiB Address Space Supported : No
182 Sideband Addressing Supported : Yes
183 Maximum Command Queue Length : 32 bytes
184 AGP Speed Selected : 4x
185 FW Transfers Enabled : No
186 >4GiB Address Space Enabled : No
187 AGP Enabled : Yes
188 Sideband Addressing Enabled : Yes
189 Current Command Queue Length : 1 byte
190
191 Bus 2 (PCI), Device Number 31, Device Function 0
192 Vendor 8086h Intel Corporation
193 Device 1360h 82806AA PCI64 PCI Bridge
194 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
195 Status 0020h (Supports 66MHz, Fast Timing)
196 Revision 03h, Header Type 01h, Bus Latency Timer 00h
197 Self test 00h (Self test not supported)
198 PCI Class Bridge, type PCI to PCI
199 PCI Bridge Information:
200 Primary Bus Number 2, Secondary Bus Number 3, Subordinate Bus number 3
201 Secondary Bus Command 8004h (ISA mapping)
202 Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
203 Received Master Abort, Medium Timing)
204 Secondary Bus Latency 00h
205 I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
206 Memory Range Passed to Secondary Bus : F4900000h..F49FFFFFh
207 Prefetchable Memory Range Passed to Secondary Bus : None
208
209 Bus 3 (PCI), Device Number 0, Device Function 0
210 Vendor 8086h Intel Corporation
211 Device 1161h 82806AA PCI64 Hub Advanced Programmable Interrupt Controller
212 Command 0006h (Memory Access, BusMaster)
213 Status 0000h
214 Revision 01h, Header Type 80h, Bus Latency Timer 00h
215 Self test 00h (Self test not supported)
216 PCI Class System, type I/O(x) APIC
217 Subsystem ID 11618086h 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (Generic ID)
218 Subsystem Vendor 8086h Intel Corporation
219 Address 0 is a Memory Address (0-4GiB) : F4900000h..F4900FFFh
220
221 Bus 3 (PCI), Device Number 4, Device Function 0
222 Vendor 9005h Adaptec
223 Device 0080h 29160/N/LP Ultra160 (AIC-7892A) SCSI Host Adapter
224 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
225 System Errors)
226 Status 02B0h (Has Capabilities List, Supports 66MHz,
227 Supports Back-To-Back Trans., Medium Timing)
228 Revision 02h, Header Type 00h, Bus Latency Timer FCh
229 Minimum Bus Grant 28h, Maximum Bus Latency 19h
230 Self test 80h (Self test supported: Completion code 0h - OK)
231 Cache line size 32 Bytes (8 DWords)
232 PCI Class Storage, type SCSI
233 Subsystem ID E2A09005h 29160 Ultra160 SCSI Controller
234 Subsystem Vendor 9005h Adaptec
235 Address 0 is an I/O Port : 2000h..200Fh
236 Address 1 is a Memory Address (64-bit) : F4901000h
237 System IRQ 5, INT# A
238 Expansion ROM of 128 KiB decoded by this card, currently disabled
239 New Capabilities List Present:
240 Power Management Capability, Version 1.1
241 Does not support low power State D1 or D2
242 Does not support PME# signalling
243 Current Power State : D0 (Device operational, no power saving)
244
245 Bus 4 (PCI), Device Number 6, Device Function 0
246 Vendor 1133h Eicon Networks Corp (Was: Eicon Technology)
247 Device E001h DIVA Pro 2.0 S/T
248 Command 0103h (I/O Access, Memory Access, System Errors)
249 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
250 Revision 01h, Header Type 00h, Bus Latency Timer 00h
251 Self test 00h (Self test not supported)
252 Cache line size 32 Bytes (8 DWords)
253 PCI Class Network, type Other
254 Subsystem ID E0011133h DIVA Pro 2.0 S/T (Generic ID)
255 Subsystem Vendor 1133h Eicon Networks Corp (Was: Eicon Technology)
256 Address 0 is a Memory Address (0-4GiB) : F4A03000h..F4A0307Fh
257 Address 1 is an I/O Port : 3400h..347Fh
258 Address 2 is an I/O Port : 34C0h..34DFh
259 System IRQ 14, INT# A
260
261 Bus 4 (PCI), Device Number 9, Device Function 0
262 Vendor 9004h Adaptec Inc
263 Device 7178h AHA-2940/W Fast/Wide SCSI Host Adapter
264 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
265 System Errors)
266 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
267 Revision 00h, Header Type 00h, Bus Latency Timer 40h
268 Minimum Bus Grant 08h, Maximum Bus Latency 08h
269 Self test 00h (Self test not supported)
270 Cache line size 32 Bytes (8 DWords)
271 PCI Class Storage, type SCSI
272 Address 0 is an I/O Port : 3000h..30FFh
273 Address 1 is a Memory Address (0-4GiB) : F4A00000h..F4A00FFFh
274 System IRQ 15, INT# A
275 Expansion ROM of 64 KiB decoded by this card, currently disabled
276
277 Bus 4 (PCI), Device Number 10, Device Function 0
278 Vendor 1013h Cirrus Logic
279 Device 6003h Crystal CS4610/14/22/24/30 SoundFusion PCI Audio Accelerator
280 Command 0106h (Memory Access, BusMaster, System Errors)
281 Status 0210h (Has Capabilities List, Medium Timing)
282 Revision 01h, Header Type 00h, Bus Latency Timer 20h
283 Minimum Bus Grant 04h, Maximum Bus Latency 18h
284 Self test 00h (Self test not supported)
285 PCI Class Multimedia, type Audio
286 Address 0 is a Memory Address (0-4GiB) : F4A01000h..F4A01FFFh
287 Address 1 is a Memory Address (0-4GiB) : F4B00000h..F4BFFFFFh
288 System IRQ 11, INT# A
289 New Capabilities List Present:
290 Power Management Capability, Version 1.1
291 Supports low power State D1
292 Supports low power State D2
293 Supports PME# signalling from mode(s) D0, D1, D2, D3hot
294 PME# signalling is currently disabled
295 3.3v AUX Current required : 0 mA (Self powered)
296 Current Power State : D0 (Device operational, no power saving)
297
298 Bus 4 (PCI), Device Number 13, Device Function 0
299 Vendor 8086h Intel Corporation
300 Device 1229h 82550 10/100 Mbps Ethernet Controller
301 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
302 System Errors)
303 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
304 Medium Timing)
305 Revision 0Ch, Header Type 00h, Bus Latency Timer 42h
306 Minimum Bus Grant 08h, Maximum Bus Latency 38h
307 Self test 00h (Self test not supported)
308 Cache line size 32 Bytes (8 DWords)
309 PCI Class Network, type Ethernet
310 Subsystem ID 1274103Ch 10/100TX PCI LAN Adapter (Guess Only!)
311 Subsystem Vendor 103Ch Hewlett-Packard Company
312 Address 0 is a Memory Address (0-4GiB) : F4A02000h..F4A02FFFh
313 Address 1 is an I/O Port : 3480h..34BFh
314 Address 2 is a Memory Address (0-4GiB) : F4A20000h..F4A3FFFFh
315 System IRQ 11, INT# A
316 New Capabilities List Present:
317 Power Management Capability, Version 1.1
318 Supports low power State D1
319 Supports low power State D2
320 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
321 PME# signalling is currently disabled
322 3.3v AUX Current required : 0 mA (Self powered)
323 Current Power State : D0 (Device operational, no power saving)
324 750 mW D0 power consume
325 750 mW D0 power dissipate
326 400 mW D1 power consume
327 400 mW D1 power dissipate
328 400 mW D2 power consume
329 400 mW D2 power dissipate
330 400 mW D3 power consume
331 400 mW D3 power dissipate
332 0 mW common logic power consume
333
334ROM PCI IRQ routing table Tests....
335 ROM IRQ routing table found at F000h:DE90h
336 Table Version 1.0 - OK
337 Table size 336 bytes - OK
338 Table Checksum CEh - OK
339 PCI Interrupt Router: 82801BA LPC Interface (ICH2 B4 step)
340 IRQ's dedicated to PCI : None
341 Error: table entries 3 and 16 refer to the same Bus=0/Device=31!
342 Error: table entries 3 and 17 refer to the same Bus=0/Device=31!
343 Error: table entries 3 and 18 refer to the same Bus=0/Device=31!
344 Error: table entries 9 and 10 refer to the same Bus=3/Device=8!
345 Error: table entries 16 and 17 refer to the same Bus=0/Device=31!
346 Error: table entries 16 and 18 refer to the same Bus=0/Device=31!
347 Error: table entries 17 and 18 refer to the same Bus=0/Device=31!
348 The ROM PCI IRQ routing table appears to be faulty!!
349
350IRQ Summary: IRQs 5,10,11,14,15 are used by PCI devices
351Shared IRQs: IRQ 11 is shared by 3 PCI Devices
352 IRQ 15 is shared by 2 PCI Devices