| 1 | PSD_install options:" /O1 /SMP" @#netlabs dot org:3.7#@ACPI core PSD Driver. (c) |
|---|
| 2 | netlabs.org 2005-2008 Build date: Feb 19 2008 13:04:08 |
|---|
| 3 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
|---|
| 4 | New Stack = FFD00000 Size:0x8000 |
|---|
| 5 | PSD_INIT ESP=0xFFCFFFE0 |
|---|
| 6 | AcpiOsInitialize ALLOC size 65536 at 0xF9060000 |
|---|
| 7 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
|---|
| 8 | AcpiOsCreateLock 8 |
|---|
| 9 | AcpiOsCreateLock 0 |
|---|
| 10 | AcpiOsPredefinedOverride: "_REV" |
|---|
| 11 | AcpiOsPredefinedOverride: "_OS_" |
|---|
| 12 | AcpiOsPredefinedOverride: override to eComStation |
|---|
| 13 | AcpiOsPredefinedOverride: "_ |
|---|
| 14 | AcpiOsCreateSemaphore: O.K. Handle=0xF90603F8 M:1 I:0 |
|---|
| 15 | AcpiOsPredefinedOverride: "_OSI" |
|---|
| 16 | AcpiOsPredefinedOverride: override to eCS |
|---|
| 17 | *** AcpiInitializeSubsystem Status = 0 *** |
|---|
| 18 | AcpiOsMapMemory new ret lin:FFE8840E phys:40E |
|---|
| 19 | AcpiOsMapMemory new ret lin:FFE88000 phys:9F000 |
|---|
| 20 | AcpiOsMapMemory new ret lin:F9040000 phys:E0000 |
|---|
| 21 | AcpiOsMapMemory new ret lin:FFE881E0 phys:F81E0 |
|---|
| 22 | ACPI: RSDP @ 0xF81E0/0x24 (v2 ATI ) |
|---|
| 23 | AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100 |
|---|
| 24 | ACPI: XSDT @ 0x7FEE3100/0x4C (v1 ATI ASUSACPI 0x42302E31 AWRD 0 |
|---|
| 25 | AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100 |
|---|
| 26 | |
|---|
| 27 | |
|---|
| 28 | |
|---|
| 29 | PSD_install options:" /O1" @#netlabs dot org:3 |
|---|
| 30 | AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440 |
|---|
| 31 | ACPI: FACP @ 0x7FEE8440/0xF4 (v3 ATI ASUSACPI 0x42302E31 AWRD 0x0) |
|---|
| 32 | MPDATA:FF800000 ESP:FF80 |
|---|
| 33 | AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440 |
|---|
| 34 | New Stack = FFD00000 Size:0x8000 |
|---|
| 35 | AcpiOsMapMemory new ret lin:FFE88280 phys:7FEE3280FE0 |
|---|
| 36 | AcpiOsInitialize ALLOC |
|---|
| 37 | ACPI: DSDT @ 0x7FEE3280/0x515D (v1 ATI ASUSACPI 0x1000 MSFT 0x3000000)piOsInitialize MapMem size 4096 at 0xFFE9E000 |
|---|
| 38 | AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000 |
|---|
| 39 | AcpiOsCreateLock 0 |
|---|
| 40 | AcpiOsP |
|---|
| 41 | ACPI: FACS @ 0x7FEE0000/0x40 |
|---|
| 42 | AcpiOsMapMemory new ret lin:FFE88680 phys:7FEE8680 |
|---|
| 43 | AcpiOsPredefinedOverride: override |
|---|
| 44 | ACPI: SSDT @ 0x7FEE8680/0x544 (v1 PTLT |
|---|
| 45 | |
|---|
| 46 | Table [DSDT] |
|---|
| 47 | Table [FACS] |
|---|
| 48 | AcpiOsMap |
|---|
| 49 | Table [FACP]t lin:FFE884 |
|---|
| 50 | Table [SSDT]440 |
|---|
| 51 | Table [HPET] |
|---|
| 52 | Table [MCFG] |
|---|
| 53 | ACPI: FA |
|---|
| 54 | Table [APIC]40/0xF4 (v3 |
|---|
| 55 | Local APIC address: FEE00000hD 0x0) |
|---|
| 56 | System also has 8259 |
|---|
| 57 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usableEE8440 |
|---|
| 58 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable7FEE3280 |
|---|
| 59 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable ASUSACPI 0x1000 MSFT 0x3000000) |
|---|
| 60 | APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable |
|---|
| 61 | AcpiOsMapMemory new ret lin:FFE88000 phys |
|---|
| 62 | APIC_IO: IO ApicID 4h addr FEC00000h INTI 0 |
|---|
| 63 | ACPI: FACS @ 0x7FEE0000/0x4 |
|---|
| 64 | ACPI: HPET @ 0x7FEE8C40/0x38 (v1 ATI |
|---|
| 65 | rigger by: Level02E31 AWRD 0x98) |
|---|
| 66 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: EdgepiOsMapMemory new ret lin:FFE88CC0 phys:7FEE8CC0 |
|---|
| 67 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: EdgePI 0x42302E31 AWRD 0x0) |
|---|
| 68 | APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: High Trigger by: Edge |
|---|
| 69 | ACPI: APIC @ 0x7FEE8580 |
|---|
| 70 | APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: High Trigger by: Edge |
|---|
| 71 | *** AcpiInitializeTables Stat |
|---|
| 72 | Size of FACDT 244 |
|---|
| 73 | *** AcpiLoadTables Status |
|---|
| 74 | The value to write to SMI_CMD to re-enable SMI 0xA0] |
|---|
| 75 | Table [FACS] |
|---|
| 76 | Table [FACP] |
|---|
| 77 | The value to write to SMI_CMD to enter the S4BIOS state 0xA4 |
|---|
| 78 | Table [MCFG] |
|---|
| 79 | Table [APIC] |
|---|
| 80 | Local AP |
|---|
| 81 | System port address of the PM1a Event Register Block 4000also has 8259 |
|---|
| 82 | APIC_PROCESSOR: ProcID |
|---|
| 83 | System port address of the PM1b Event Register Block 0 |
|---|
| 84 | APIC_PROCESSOR: ProcID 1h LocalAp |
|---|
| 85 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
|---|
| 86 | APIC_PROCESSOR: ProcID 2h LocalApicID 2h - |
|---|
| 87 | System port address of the PM1a Control Register |
|---|
| 88 | |
|---|
| 89 | Offset within the ACPI general-purpose event model where GPE1 based events start244 |
|---|
| 90 | Type of computer - Desktop |
|---|
| 91 | System |
|---|
| 92 | 0ct |
|---|
| 93 | GPE enable register: 0: 0: 0: 0 in 8259 mode. 9 |
|---|
| 94 | GPE status register: 0: 1: 0: 40 |
|---|
| 95 | System port address |
|---|
| 96 | The system does not support a C2 state. 65 |
|---|
| 97 | The valu |
|---|
| 98 | The system does not support a C3 state 3E9 |
|---|
| 99 | The zero-based index of where the processor's duty cycle setting is within the p |
|---|
| 100 | The value to write to SMI_CMD to enter the S4BIO |
|---|
| 101 | rocessor's P_CNT register 1 |
|---|
| 102 | The RTC CMOS RAM index to the day-of-month alarm value 13gister Block 4000 |
|---|
| 103 | IA-PC Boot Architecture Flags 0x0ess of the PM1b Event Register Bl |
|---|
| 104 | Fixed feature flags 1AD |
|---|
| 105 | The reset register |
|---|
| 106 | Address 100 |
|---|
| 107 | The value to write to the RESET_REG port to reset the system FERegister Block 0 |
|---|
| 108 | ***** Throttl Width 0 Offset 1ed by PM1a_CNT_BLK (PM1_CNT_LE |
|---|
| 109 | evxfevnt-176 [2] Enable: Transition to ACPI mode successfulSystem port address of the PM2 Control Register Block 4050 |
|---|
| 110 | evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 decoded by PM2_CNT_BLK 1 |
|---|
| 111 | System |
|---|
| 112 | AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAEDRegister Block 4008 |
|---|
| 113 | AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000r of bytes decoded by PM_TMR_BLK (=4) 4 |
|---|
| 114 | evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 0 Runtime GPEs in Register Block 402 |
|---|
| 115 | AcpiOsMapMemory new ret lin:FFE87FEA phys:FFFEAPE0_BLK 0x8 |
|---|
| 116 | ************ Scan EC Status = 0PE1_BLK 0x0 |
|---|
| 117 | Completing Region/Field/Buffer/Package initialization:.......................... based events start |
|---|
| 118 | .................ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_N |
|---|
| 119 | GPE status register: 0: 1: 0: 40 |
|---|
| 120 | The syst |
|---|
| 121 | OT_FOUNDot suppo |
|---|
| 122 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDes not support a C3 state 3E9 |
|---|
| 123 | |
|---|
| 124 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDn the p |
|---|
| 125 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NO |
|---|
| 126 | The RTC CMOS RAM index to the |
|---|
| 127 | Register Bit Offset 0 |
|---|
| 128 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDe to write to the RESET_REG port to reset the system FE |
|---|
| 129 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDet 1 |
|---|
| 130 | evxfevnt-176 [2] Enable: Transition t |
|---|
| 131 | ...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 132 | evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on in |
|---|
| 133 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 134 | AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAED |
|---|
| 135 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDphys:7FEE0000 |
|---|
| 136 | |
|---|
| 137 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 138 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDND |
|---|
| 139 | ...ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND |
|---|
| 140 | ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 141 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 142 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDND |
|---|
| 143 | ...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDND |
|---|
| 144 | ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 145 | ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND |
|---|
| 146 | ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND |
|---|
| 147 | ....................................................ACPI Error (dsobject-208): [\ |
|---|
| 148 | ACPI Error |
|---|
| 149 | _PR_.CPU0] Namespace lookup failure, AE_NOT_FOUNDE_NOT_FOUND |
|---|
| 150 | Executing subtree for Buffer/Package/Regionr (dsobject-208): [LNKA] Namespace lookup f |
|---|
| 151 | ACPI Exception (nsinit-425): AE_NOT_FOUND, Could not execute arguments for [_PSL |
|---|
| 152 | ...ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT |
|---|
| 153 | ] (Package) [20080123] |
|---|
| 154 | ................... |
|---|
| 155 | |
|---|
| 156 | ACPI Error (dsobjec |
|---|
| 157 | Executed 3 _INI methods requiring 1 _STA executions (examined 68 objects) |
|---|
| 158 | ...ACPI Error (dsobjec |
|---|
| 159 | ************ AcpiInitializeObjects mask:0 Status = 0 |
|---|
| 160 | Processor [C000] |
|---|
| 161 | ACPI Error |
|---|
| 162 | Processor [C001][LNKA] Namespace |
|---|
| 163 | Processor [C002]AE_NOT_FOUND |
|---|
| 164 | Processor [C003] |
|---|
| 165 | Status 0x0 0 |
|---|
| 166 | ************ AcpiInstallNotifyHandler System Status = 0ookup failure, AE_NOT_FOUND |
|---|
| 167 | ************ AcpiInstallNotifyHandler Device Status = 0(dsobject-208): [LNKC] Namespace lookup failure, AE_NOT |
|---|
| 168 | |
|---|
| 169 | Init ACPI rc=0 |
|---|
| 170 | AcpiOsMapMemory new ret lin |
|---|
| 171 | |
|---|
| 172 | ACPI Error (dsobject-208) |
|---|
| 173 | WakeupVector Lin: FFE84000 Phys: 63000 IPIStack:FFDEC000 s_cpu:0 |
|---|
| 174 | .......... |
|---|
| 175 | GetWakeupVector Status = 0...............ACPI Error |
|---|
| 176 | PIC Mask:FFFFDFFB |
|---|
| 177 | PSD_GET_NUM_OF_PROCS - has 4 CPU |
|---|
| 178 | _ |
|---|
| 179 | ProcInit CPU0space lookup |
|---|
| 180 | LApic ID:0x0: ver 0x80050010 |
|---|
| 181 | Max LVT=6 |
|---|
| 182 | Execu |
|---|
| 183 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
|---|
| 184 | ACPI Except |
|---|
| 185 | Status Evaluate Processor 0x0 AE_OK |
|---|
| 186 | CPU0 Status Evaluate _PCT 0x0 AE_OK |
|---|
| 187 | Perf control: 0xC0010062tializing Device/Processor |
|---|
| 188 | Perf status: 0x0 executing _INI me |
|---|
| 189 | End init CPU0 rc:0 |
|---|
| 190 | StartProcessor: CPU1 id 1 |
|---|
| 191 | Exe |
|---|
| 192 | AcpiOsMapMemory new ret lin:FFDF1000 phys:0ions (examined 68 objects) |
|---|
| 193 | StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFE84000, BootCode.Phys:0x6izeObjects mask:0 Status = 0 |
|---|
| 194 | 3000esso |
|---|
| 195 | StartProcessor 1 id:1 LAPICid:1or [C001] |
|---|
| 196 | Proce |
|---|
| 197 | Wait INI App Proc |
|---|
| 198 | Process |
|---|
| 199 | Send SIPI1 |
|---|
| 200 | StartProcessor success SIPI1 |
|---|
| 201 | ************ AcpiInstallNot |
|---|
| 202 | ProcInit CPU1tem Status = |
|---|
| 203 | LApic ID:0x1000000: ver 0x80050010 |
|---|
| 204 | ************ |
|---|
| 205 | Max LVT=6llNotifyH |
|---|
| 206 | Set HLT duration as IOdelay: |
|---|
| 207 | ProcId: 0x100000 lin: FFE85 |
|---|
| 208 | P_BLK: 0x40101) Ver 21 MaxIO ent |
|---|
| 209 | P_BLK len: 0x6 |
|---|
| 210 | CPU1 Status Evaluate _PCT 0x0 AE_OK |
|---|
| 211 | Arbitration |
|---|
| 212 | Perf control: 0xC0010062 (4000000) 4 |
|---|
| 213 | Perf status: 0x0 |
|---|
| 214 | End init CPU1 rc:0m IRQ0 |
|---|
| 215 | StartProcessor: CPU2 id 2n: FFE84000 |
|---|
| 216 | StartProcessor 2 id:2 LAPICid:2FE84000 Phys: 63000 IPIStack:FF |
|---|
| 217 | Wait INI App Proc |
|---|
| 218 | Send SIPI1 |
|---|
| 219 | StartProcessor success SIPI1eupVector Status = 0 |
|---|
| 220 | ProcInit CPU2 |
|---|
| 221 | PIC Mask |
|---|
| 222 | LApic ID:0x2000000: ver 0x80050010 CPU0 |
|---|
| 223 | UNMASK PIC IRQ8 |
|---|
| 224 | Max LVT=6FFDEFB Re |
|---|
| 225 | Set HLT duration as IOdelay:0x11C |
|---|
| 226 | PSDFree: a |
|---|
| 227 | Status Evaluate Processor PDC 0x5 AE_NOT_ |
|---|
| 228 | |
|---|
| 229 | P_BLK len: 0x6ge 0->1 |
|---|
| 230 | CPU2 Status Evaluate _PCT 0x0 AE_OKClass:604 Hdr:1 Bridge 0->2 |
|---|
| 231 | Perf status: 0x0 |
|---|
| 232 | End init CPU2 rc:0 |
|---|
| 233 | StartProcessor: CPU3 id 3 |
|---|
| 234 | StartProcessor 3 id:3 LAPICid:3 |
|---|
| 235 | Wait INI App Proc |
|---|
| 236 | Send SIPI1 |
|---|
| 237 | StartProcessor success SIPI1 |
|---|
| 238 | ProcInit CPU3 |
|---|
| 239 | LApic ID:0x3000000: ver 0x80050010 |
|---|
| 240 | Max LVT=6 |
|---|
| 241 | End Startup code |
|---|
| 242 | Set HLT duration as IOdelay:0x11C |
|---|
| 243 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
|---|
| 244 | Status Evaluate Processor 0x0 AE_OK |
|---|
| 245 | Usable:4 Counter:3 |
|---|
| 246 | CPU id to N:3 |
|---|
| 247 | ProcId: 0x3 |
|---|
| 248 | P_BLK: 0x4010 |
|---|
| 249 | P_BLK len: 0x6 |
|---|
| 250 | CPU3 Status Evaluate _PCT 0x0 AE_OK |
|---|
| 251 | Perf control: 0xC0010062 |
|---|
| 252 | Perf status: 0x0 |
|---|
| 253 | End init CPU3 rc:0 |
|---|
| 254 | |
|---|
