PSD_install options:" /O1 /SMP" @#netlabs dot org:3.7#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Feb 19 2008 13:04:08 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 PSD_INIT ESP=0xFFCFFFE0 AcpiOsInitialize ALLOC size 65536 at 0xF9060000 AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsCreateLock 8 AcpiOsCreateLock 0 AcpiOsPredefinedOverride: "_REV" AcpiOsPredefinedOverride: "_OS_" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: "_ AcpiOsCreateSemaphore: O.K. Handle=0xF90603F8 M:1 I:0 AcpiOsPredefinedOverride: "_OSI" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** AcpiOsMapMemory new ret lin:FFE8840E phys:40E AcpiOsMapMemory new ret lin:FFE88000 phys:9F000 AcpiOsMapMemory new ret lin:F9040000 phys:E0000 AcpiOsMapMemory new ret lin:FFE881E0 phys:F81E0 ACPI: RSDP @ 0xF81E0/0x24 (v2 ATI ) AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100 ACPI: XSDT @ 0x7FEE3100/0x4C (v1 ATI ASUSACPI 0x42302E31 AWRD 0 AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100 PSD_install options:" /O1" @#netlabs dot org:3 AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440 ACPI: FACP @ 0x7FEE8440/0xF4 (v3 ATI ASUSACPI 0x42302E31 AWRD 0x0) MPDATA:FF800000 ESP:FF80 AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440 New Stack = FFD00000 Size:0x8000 AcpiOsMapMemory new ret lin:FFE88280 phys:7FEE3280FE0 AcpiOsInitialize ALLOC ACPI: DSDT @ 0x7FEE3280/0x515D (v1 ATI ASUSACPI 0x1000 MSFT 0x3000000)piOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000 AcpiOsCreateLock 0 AcpiOsP ACPI: FACS @ 0x7FEE0000/0x40 AcpiOsMapMemory new ret lin:FFE88680 phys:7FEE8680 AcpiOsPredefinedOverride: override ACPI: SSDT @ 0x7FEE8680/0x544 (v1 PTLT Table [DSDT] Table [FACS] AcpiOsMap Table [FACP]t lin:FFE884 Table [SSDT]440 Table [HPET] Table [MCFG] ACPI: FA Table [APIC]40/0xF4 (v3 Local APIC address: FEE00000hD 0x0) System also has 8259 APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usableEE8440 APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable7FEE3280 APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable ASUSACPI 0x1000 MSFT 0x3000000) APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable AcpiOsMapMemory new ret lin:FFE88000 phys APIC_IO: IO ApicID 4h addr FEC00000h INTI 0 ACPI: FACS @ 0x7FEE0000/0x4 ACPI: HPET @ 0x7FEE8C40/0x38 (v1 ATI rigger by: Level02E31 AWRD 0x98) APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: EdgepiOsMapMemory new ret lin:FFE88CC0 phys:7FEE8CC0 APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: EdgePI 0x42302E31 AWRD 0x0) APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: High Trigger by: Edge ACPI: APIC @ 0x7FEE8580 APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: High Trigger by: Edge *** AcpiInitializeTables Stat Size of FACDT 244 *** AcpiLoadTables Status The value to write to SMI_CMD to re-enable SMI 0xA0] Table [FACS] Table [FACP] The value to write to SMI_CMD to enter the S4BIOS state 0xA4 Table [MCFG] Table [APIC] Local AP System port address of the PM1a Event Register Block 4000also has 8259 APIC_PROCESSOR: ProcID System port address of the PM1b Event Register Block 0 APIC_PROCESSOR: ProcID 1h LocalAp Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 APIC_PROCESSOR: ProcID 2h LocalApicID 2h - System port address of the PM1a Control Register Offset within the ACPI general-purpose event model where GPE1 based events start244 Type of computer - Desktop System 0ct GPE enable register: 0: 0: 0: 0 in 8259 mode. 9 GPE status register: 0: 1: 0: 40 System port address The system does not support a C2 state. 65 The valu The system does not support a C3 state 3E9 The zero-based index of where the processor's duty cycle setting is within the p The value to write to SMI_CMD to enter the S4BIO rocessor's P_CNT register 1 The RTC CMOS RAM index to the day-of-month alarm value 13gister Block 4000 IA-PC Boot Architecture Flags 0x0ess of the PM1b Event Register Bl Fixed feature flags 1AD The reset register Address 100 The value to write to the RESET_REG port to reset the system FERegister Block 0 ***** Throttl Width 0 Offset 1ed by PM1a_CNT_BLK (PM1_CNT_LE evxfevnt-176 [2] Enable: Transition to ACPI mode successfulSystem port address of the PM2 Control Register Block 4050 evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 decoded by PM2_CNT_BLK 1 System AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAEDRegister Block 4008 AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000r of bytes decoded by PM_TMR_BLK (=4) 4 evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 0 Runtime GPEs in Register Block 402 AcpiOsMapMemory new ret lin:FFE87FEA phys:FFFEAPE0_BLK 0x8 ************ Scan EC Status = 0PE1_BLK 0x0 Completing Region/Field/Buffer/Package initialization:.......................... based events start .................ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_N GPE status register: 0: 1: 0: 40 The syst OT_FOUNDot suppo ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDes not support a C3 state 3E9 ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDn the p ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NO The RTC CMOS RAM index to the Register Bit Offset 0 ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDe to write to the RESET_REG port to reset the system FE ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDet 1 evxfevnt-176 [2] Enable: Transition t ...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on in ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAED ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDphys:7FEE0000 ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDND ...ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDND ...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDND ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND ....................................................ACPI Error (dsobject-208): [\ ACPI Error _PR_.CPU0] Namespace lookup failure, AE_NOT_FOUNDE_NOT_FOUND Executing subtree for Buffer/Package/Regionr (dsobject-208): [LNKA] Namespace lookup f ACPI Exception (nsinit-425): AE_NOT_FOUND, Could not execute arguments for [_PSL ...ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT ] (Package) [20080123] ................... ACPI Error (dsobjec Executed 3 _INI methods requiring 1 _STA executions (examined 68 objects) ...ACPI Error (dsobjec ************ AcpiInitializeObjects mask:0 Status = 0 Processor [C000] ACPI Error Processor [C001][LNKA] Namespace Processor [C002]AE_NOT_FOUND Processor [C003] Status 0x0 0 ************ AcpiInstallNotifyHandler System Status = 0ookup failure, AE_NOT_FOUND ************ AcpiInstallNotifyHandler Device Status = 0(dsobject-208): [LNKC] Namespace lookup failure, AE_NOT Init ACPI rc=0 AcpiOsMapMemory new ret lin ACPI Error (dsobject-208) WakeupVector Lin: FFE84000 Phys: 63000 IPIStack:FFDEC000 s_cpu:0 .......... GetWakeupVector Status = 0...............ACPI Error PIC Mask:FFFFDFFB PSD_GET_NUM_OF_PROCS - has 4 CPU _ ProcInit CPU0space lookup LApic ID:0x0: ver 0x80050010 Max LVT=6 Execu Status Evaluate Processor PDC 0x5 AE_NOT_FOUND ACPI Except Status Evaluate Processor 0x0 AE_OK CPU0 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xC0010062tializing Device/Processor Perf status: 0x0 executing _INI me End init CPU0 rc:0 StartProcessor: CPU1 id 1 Exe AcpiOsMapMemory new ret lin:FFDF1000 phys:0ions (examined 68 objects) StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFE84000, BootCode.Phys:0x6izeObjects mask:0 Status = 0 3000esso StartProcessor 1 id:1 LAPICid:1or [C001] Proce Wait INI App Proc Process Send SIPI1 StartProcessor success SIPI1 ************ AcpiInstallNot ProcInit CPU1tem Status = LApic ID:0x1000000: ver 0x80050010 ************ Max LVT=6llNotifyH Set HLT duration as IOdelay: ProcId: 0x100000 lin: FFE85 P_BLK: 0x40101) Ver 21 MaxIO ent P_BLK len: 0x6 CPU1 Status Evaluate _PCT 0x0 AE_OK Arbitration Perf control: 0xC0010062 (4000000) 4 Perf status: 0x0 End init CPU1 rc:0m IRQ0 StartProcessor: CPU2 id 2n: FFE84000 StartProcessor 2 id:2 LAPICid:2FE84000 Phys: 63000 IPIStack:FF Wait INI App Proc Send SIPI1 StartProcessor success SIPI1eupVector Status = 0 ProcInit CPU2 PIC Mask LApic ID:0x2000000: ver 0x80050010 CPU0 UNMASK PIC IRQ8 Max LVT=6FFDEFB Re Set HLT duration as IOdelay:0x11C PSDFree: a Status Evaluate Processor PDC 0x5 AE_NOT_ P_BLK len: 0x6ge 0->1 CPU2 Status Evaluate _PCT 0x0 AE_OKClass:604 Hdr:1 Bridge 0->2 Perf status: 0x0 End init CPU2 rc:0 StartProcessor: CPU3 id 3 StartProcessor 3 id:3 LAPICid:3 Wait INI App Proc Send SIPI1 StartProcessor success SIPI1 ProcInit CPU3 LApic ID:0x3000000: ver 0x80050010 Max LVT=6 End Startup code Set HLT duration as IOdelay:0x11C Status Evaluate Processor PDC 0x5 AE_NOT_FOUND Status Evaluate Processor 0x0 AE_OK Usable:4 Counter:3 CPU id to N:3 ProcId: 0x3 P_BLK: 0x4010 P_BLK len: 0x6 CPU3 Status Evaluate _PCT 0x0 AE_OK Perf control: 0xC0010062 Perf status: 0x0 End init CPU3 rc:0