1 | AllocIRQMem at 0xFFE89000 (24576 bytes) |
---|
2 | |
---|
3 | PSD_install options:" /SMP /VBE /APIC" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Nov 25 2007 02:10:40 |
---|
4 | MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 |
---|
5 | New Stack = FFD00000 Size:0x8000 |
---|
6 | AcpiOsInitialize ALLOC size 65536 at 0xF9690000 |
---|
7 | AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 |
---|
8 | AcpiOsCreateLock 8 |
---|
9 | AcpiOsCreateLock 8 |
---|
10 | AcpiOsPredefinedOverride: "_REV" |
---|
11 | AcpiOsPredefinedOverride: "_OS_" |
---|
12 | AcpiOsPredefinedOverride: override to eComStation |
---|
13 | AcpiOsPredefinedOverride: "_GL_" |
---|
14 | AcpiOsCreateSemaphore: O.K. Handle=0xF96903F8 M:1 I:0 |
---|
15 | AcpiOsPredefinedOverride: "_OSI" |
---|
16 | AcpiOsPredefinedOverride: override to eCS |
---|
17 | *** AcpiInitializeSubsystem Status = 0 *** |
---|
18 | ACPI: RSDP @ 0xF67D0/0x24 (v2 LENOVO) |
---|
19 | ACPI: XSDT @ 0x7FED155E/0x8C (v1 LENOVO TP-79 0x2120 LTP 0x0) |
---|
20 | ACPI: FACP @ 0x7FED1600/0xF4 (v3 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
21 | ACPI Warning (tbfadt-505): Optional field "Gpe1Block" has zero address or length: 0102C/0 [20070320] |
---|
22 | ACPI: DSDT @ 0x7FED195E/0xD3A9 (v1 LENOVO TP-79 0x2120 MSFT 0x100000E) |
---|
23 | ACPI: FACS @ 0x7FEF4000/0x40 |
---|
24 | ACPI: SSDT @ 0x7FED17B4/0x1AA (v1 LENOVO TP-79 0x2120 MSFT 0x100000E) |
---|
25 | ACPI: ECDT @ 0x7FEDED07/0x52 (v1 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
26 | ACPI: TCPA @ 0x7FEDED59/0x32 (v2 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
27 | ACPI: APIC @ 0x7FEDED8B/0x68 (v1 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
28 | ACPI: MCFG @ 0x7FEDEDF3/0x3C (v1 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
29 | ACPI: HPET @ 0x7FEDEE2F/0x38 (v1 LENOVO TP-79 0x2120 LNVO 0x1) |
---|
30 | ACPI: BOOT @ 0x7FEDEFD8/0x28 (v1 LENOVO TP-79 0x2120 LTP 0x1) |
---|
31 | ACPI: SSDT @ 0x7FEF2697/0x25F (v1 LENOVO TP-79 0x2120 INTL 0x20050513) |
---|
32 | ACPI: SSDT @ 0x7FEF28F6/0xA6 (v1 LENOVO TP-79 0x2120 INTL 0x20050513) |
---|
33 | ACPI: SSDT @ 0x7FEF299C/0x4F7 (v1 LENOVO TP-79 0x2120 INTL 0x20050513) |
---|
34 | ACPI: SSDT @ 0x7FEF2E93/0x8BD (v1 LENOVO TP-79 0x2120 INTL 0x20050513) |
---|
35 | ACPI: SSDT @ 0x7FEF3750/0x69C (v1 LENOVO TP-79 0x2120 INTL 0x20050513) |
---|
36 | *** AcpiInitializeTables Status = 0 *** |
---|
37 | AcpiOsTableOverride Ex:FFCD595E New:FFCFFFC4 SIG:[DSDT] |
---|
38 | AcpiOsCreateSemaphore: O.K. Handle=0xF8FFAA30 M:FFFFFFFF I:0 |
---|
39 | *** AcpiLoadTables Status = 0 *** |
---|
40 | Table [DSDT] |
---|
41 | Table [FACS] |
---|
42 | Table [FACP] |
---|
43 | Table [SSDT] |
---|
44 | Table [ECDT] |
---|
45 | EC Control: 66:1:8:0:0 |
---|
46 | EC Data: 62:1:8:0:0 |
---|
47 | UID: 0 |
---|
48 | GPE bit: 1C |
---|
49 | Name in ACPI:\_SB.PCI0.LPC.EC |
---|
50 | Status GetHandle: 0 - AE_OK |
---|
51 | Table [TCPA] |
---|
52 | Table [APIC] |
---|
53 | Local APIC address: FEE00000h |
---|
54 | System also has 8259 |
---|
55 | APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable |
---|
56 | APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable |
---|
57 | APIC_IO: IO ApicID 1h addr FEC00000h INTI 0 |
---|
58 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec |
---|
59 | APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level |
---|
60 | APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge |
---|
61 | APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge |
---|
62 | Table [MCFG] |
---|
63 | Table [HPET] |
---|
64 | Table [BOOT] |
---|
65 | Table [SSDT] |
---|
66 | Table [SSDT] |
---|
67 | Table [SSDT] |
---|
68 | Table [SSDT] |
---|
69 | Table [SSDT] |
---|
70 | Size of FACDT 244 |
---|
71 | Type of computer - Mobile |
---|
72 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
---|
73 | System port address of the SMI Command Port 0xB2 |
---|
74 | The value to write to SMI_CMD to disable SMI 0xF0 |
---|
75 | The value to write to SMI_CMD to re-enable SMI 0xF1 |
---|
76 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
---|
77 | The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0xF3 |
---|
78 | System port address of the PM1a Event Register Block 1000 |
---|
79 | System port address of the PM1b Event Register Block 0 |
---|
80 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
---|
81 | System port address of the PM1a Control Register Block 1004 |
---|
82 | System port address of the PM1b Control Register Block 0 |
---|
83 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
---|
84 | System port address of the PM2 Control Register Block 1020 |
---|
85 | Number of bytes decoded by PM2_CNT_BLK 1 |
---|
86 | System port address of the Power Management Timer Control Register Block 1008 |
---|
87 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
---|
88 | System port address of General-Purpose Event 0 Register Block 1028 |
---|
89 | System port address of General-Purpose Event 1 Register Block 0 |
---|
90 | Number of bytes decoded by GPE0_BLK 0x8 |
---|
91 | Number of bytes decoded by GPE1_BLK 0x0 |
---|
92 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
---|
93 | GPE enable register: 0: 0: 0: 14 |
---|
94 | GPE status register: 0: 0: C3: EE |
---|
95 | The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0xF4 |
---|
96 | The worst-case hardware latency to enter and exit a C2 state 1 us |
---|
97 | The worst-case hardware latency to enter and exit a C3 state 85 us |
---|
98 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1 |
---|
99 | The bit width of the processor's duty cycle setting value in the P_CNT register 3 |
---|
100 | The RTC CMOS RAM index to the day-of-month alarm value 13 |
---|
101 | The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 |
---|
102 | IA-PC Boot Architecture Flags 0x12 |
---|
103 | Fixed feature flags C2AD |
---|
104 | The reset register: |
---|
105 | Type of address space - System I/O |
---|
106 | Register Bit Width 8 |
---|
107 | Register Bit Offset 0 |
---|
108 | Access size 0 |
---|
109 | Address 3321 |
---|
110 | The value to write to the RESET_REG port to reset the system 6 |
---|
111 | ***** Throttl Width 3 Offset 1 |
---|
112 | AcpiOsInstallIntterrupHandler IRQ9 handler F96E0F09 |
---|
113 | ************ AcpiEnableSubsystem Status = 0 |
---|
114 | ************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F96B1CAC - AE_OK |
---|
115 | Install GPE Status 0 |
---|
116 | GpeSetType Status = 0 - AE_OK |
---|
117 | EC[0] GPE1C GpeEnable Status = 0 - AE_OK |
---|
118 | ACPI Error (psparse-626): Method parse/execution failed [\_SB_._INI] (Node F9690C60), AE_BAD_DATA |
---|
119 | AcpiOsDerivePCIID([PCI0] ,[MHCS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0 |
---|
120 | AcpiEcSetup handle F9698098 Function 0 Count 1 |
---|
121 | AcpiOsDerivePCIID([PCI0] ,[U7CS],) Bus:0 Dev:29 Fun:7 - Derive: Bus:0 Dev:29 Fun:7 |
---|
122 | ************ AcpiInitializeObjects mask:0 Status = 0 |
---|
123 | Processor [CPU0] |
---|
124 | Processor [CPU1] |
---|
125 | Status 0x0 0 |
---|
126 | ************ AcpiInstallNotifyHandler System Status = 0 |
---|
127 | ************ AcpiInstallNotifyHandler Device Status = 0 |
---|
128 | AcpiOsDerivePCIID([PCI0] ,[LPCS],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0 |
---|
129 | Current IRQs line 24 |
---|
130 | ACPI: SSDT @ 0x7FEF203D/0x65A (v1 PmRef Cpu0Cst 0x100 INTL 0x20050513) |
---|
131 | Status Evaluate Processor PDC 0x0 AE_OK |
---|
132 | Status Evaluate Processor 0x0 AE_OK |
---|
133 | Status C 0x0 AE_OK |
---|
134 | Usable:2 Counter:0 |
---|
135 | CPU id to N:0 |
---|
136 | ProcId: 0x0 |
---|
137 | P_BLK: 0x1010 |
---|
138 | P_BLK len: 0x6 |
---|
139 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
140 | CPU0 Status Evaluate _CST 0x0 AE_OK |
---|
141 | _CST has 3 Cstates |
---|
142 | C1State control: 0x0 |
---|
143 | Latency: 1 uSec |
---|
144 | Power consuption: 1000 mWatt |
---|
145 | C2State control: 0x1014 |
---|
146 | Latency: 1 uSec |
---|
147 | Power consuption: 500 mWatt |
---|
148 | C3State control: 0x1015 |
---|
149 | Latency: 17 uSec |
---|
150 | Power consuption: 250 mWatt |
---|
151 | ACPI: SSDT @ 0x7FEF1FB8/0x85 (v1 PmRef Cpu1Cst 0x100 INTL 0x20050513) |
---|
152 | Status Evaluate Processor PDC 0x0 AE_OK |
---|
153 | Status Evaluate Processor 0x0 AE_OK |
---|
154 | Status C 0x0 AE_OK |
---|
155 | Usable:2 Counter:1 |
---|
156 | CPU id to N:1 |
---|
157 | ProcId: 0x1 |
---|
158 | P_BLK: 0x1010 |
---|
159 | P_BLK len: 0x6 |
---|
160 | CPU1 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
---|
161 | CPU1 Status Evaluate _CST 0x0 AE_OK |
---|
162 | _CST has 3 Cstates |
---|
163 | C1State control: 0x0 |
---|
164 | Latency: 1 uSec |
---|
165 | Power consuption: 1000 mWatt |
---|
166 | C2State control: 0x1014 |
---|
167 | Latency: 1 uSec |
---|
168 | Power consuption: 500 mWatt |
---|
169 | C3State control: 0x1015 |
---|
170 | Latency: 17 uSec |
---|
171 | Power consuption: 250 mWatt |
---|
172 | PSDFree: at 0xF96A0000 success! |
---|
173 | AcpiWaitIBF timeout KEE 8 rc=640 |
---|
174 | AcpiOsExecute type:2 |
---|
175 | AcpiOsExecute - direct executing |
---|
176 | AcpiOsDerivePCIID([PCI0] ,[P2CS],) Bus:0 Dev:28 Fun:2 - Derive: Bus:0 Dev:28 Fun:2 |
---|
177 | AcpiOsDerivePCIID([PCI0] ,[P0CS],) Bus:0 Dev:28 Fun:0 - Derive: Bus:0 Dev:28 Fun:0 |
---|
178 | AcpiWaitOBF timeout KEE 2 rc=640 |
---|
179 | AcpiWaitIBF timeout KEE 8 rc=640 |
---|
180 | AcpiWaitOBF timeout KEE 2 rc=640 |
---|
181 | Finding:0 bridges |
---|
182 | 0:0.0 Class:600 Hdr:0 Bridge H->0 |
---|
183 | 0:1.0 Class:604 Hdr:1 Bridge 0->1 |
---|
184 | 0:27.0 Class:403 Hdr:0 |
---|
185 | 0:28.0 Class:604 Hdr:81 Bridge 0->2 |
---|
186 | 0:28.1 Class:604 Hdr:81 Bridge 0->3 |
---|
187 | 0:28.2 Class:604 Hdr:81 Bridge 0->4..11 |
---|
188 | 0:28.3 Class:604 Hdr:81 Bridge 0->12..19 |
---|
189 | 0:29.0 Class:C03 Hdr:80 |
---|
190 | 0:29.1 Class:C03 Hdr:0 |
---|
191 | 0:29.2 Class:C03 Hdr:0 |
---|
192 | 0:29.3 Class:C03 Hdr:0 |
---|
193 | 0:29.7 Class:C03 Hdr:0 |
---|
194 | 0:30.0 Class:604 Hdr:1 Bridge 0->21..24 |
---|
195 | 0:31.0 Class:601 Hdr:80 |
---|
196 | 0:31.2 Class:101 Hdr:0 |
---|
197 | 0:31.3 Class:C05 Hdr:0 |
---|
198 | 1:0.0 Class:300 Hdr:0 |
---|
199 | 2:0.0 Class:200 Hdr:0 |
---|
200 | 3:0.0 Class:280 Hdr:0 |
---|
201 | 21:0.0 Class:607 Hdr:2 Bridge 21->22..24 |
---|
202 | PCI Bus scan: 25 PCI buses found. |
---|
203 | Scan ACPI tree for PCI functions |
---|
204 | 0:0.0 'PCI0' (F9692470) |
---|
205 | 0:31.0 'LPC_' (F9692498) |
---|
206 | 0:2.0 'VID_' (F969E5C0) |
---|
207 | 0:1.0 'AGP_' (F969F050) |
---|
208 | 1:0.0 'VID_' (F969F218) |
---|
209 | 0:28.0 'EXP0' (F969FD48) |
---|
210 | 0:28.1 'EXP1' (F9680120) |
---|
211 | 0:28.2 'EXP2' (F9680380) |
---|
212 | 4:0.0 'EXUP' (F9680720) |
---|
213 | 0:28.3 'EXP3' (F96807D0) |
---|
214 | 12:0.0 'EXPD' (F9680A30) |
---|
215 | 0:30.0 'PCI1' (F9680A80) |
---|
216 | 21:0.0 'CDBS' (F9680BF8) |
---|
217 | 0:31.1 'IDE0' (F9680CD0) |
---|
218 | 0:31.2 'SATA' (F9681D58) |
---|
219 | 0:31.3 'SMBU' (F9682908) |
---|
220 | 0:29.0 'USB0' (F96829A8) |
---|
221 | 0:29.1 'USB1' (F9682C08) |
---|
222 | 0:29.2 'USB2' (F9682E90) |
---|
223 | 0:29.3 'USB3' (F9683190) |
---|
224 | 0:29.7 'USB7' (F9683208) |
---|
225 | 0:27.0 'HDEF' (F9683580) |
---|
226 | Bridges found: |
---|
227 | 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (F9692470) _PRT |
---|
228 | 0:1.0 class:604 type: 1 Bus 0->1 ACPI: 'AGP_' (F969F050) _PRT |
---|
229 | 0:28.0 class:604 type: 1 Bus 0->2 ACPI: 'EXP0' (F969FD48) _PRT |
---|
230 | 0:28.1 class:604 type: 1 Bus 0->3 ACPI: 'EXP1' (F9680120) _PRT |
---|
231 | 0:28.2 class:604 type: 1 Bus 0->4 ACPI: 'EXP2' (F9680380) _PRT |
---|
232 | 0:28.3 class:604 type: 1 Bus 0->12 ACPI: 'EXP3' (F96807D0) _PRT |
---|
233 | 0:30.0 class:604 type: 1 Bus 0->21 ACPI: 'PCI1' (F9680A80) _PRT |
---|
234 | 21:0.0 class:607 type: 2 Bus 21->22 ACPI: 'CDBS' (F9680BF8) |
---|
235 | IRQLinks found: |
---|
236 | 0: 'LNKA' (F9690CF8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 21:0.0 2:0.0 1:0.0 0:31.2 0:29.0 |
---|
237 | A[] |
---|
238 | 1: 'LNKB' (F9691070) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 3:0.0 0:29.1 0:27.0 |
---|
239 | A[] |
---|
240 | 2: 'LNKE' (F9691748) P[] |
---|
241 | A[] |
---|
242 | 3: 'LNKF' (F9691990) P[] |
---|
243 | A[] |
---|
244 | 4: 'LNKG' (F9691BD8) P[] |
---|
245 | A[] |
---|
246 | 5: 'LNKH' (F9691E20) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:31.3 |
---|
247 | A[] |
---|
248 | 6: 'LNKC' (F96912B8) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.2 |
---|
249 | A[] |
---|
250 | 7: 'LNKD' (F9691500) P[ 3, 4, 5, 6, 7, 9, 10,*11] <- 0:29.7 0:29.3 |
---|
251 | A[] |
---|
252 | PCI devices found: |
---|
253 | 0:0.0 8086:27A0 'PCI0' |
---|
254 | 0:1.0 8086:27A1 'AGP_' |
---|
255 | 0:27.0 8086:27D8 'HDEF' IRQs: PCI:11 PIC:'LNKB':11 APIC:17 Apic Set: 17 MSI |
---|
256 | 0:28.0 8086:27D0 'EXP0' |
---|
257 | 0:28.1 8086:27D2 'EXP1' |
---|
258 | 0:28.2 8086:27D4 'EXP2' |
---|
259 | 0:28.3 8086:27D6 'EXP3' |
---|
260 | 0:29.0 8086:27C8 'USB0' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Apic Set: 16 |
---|
261 | 0:29.1 8086:27C9 'USB1' IRQs: PCI:11 PIC:'LNKB':11 APIC:17 Apic Set: 17 |
---|
262 | 0:29.2 8086:27CA 'USB2' IRQs: PCI:11 PIC:'LNKC':11 APIC:18 Apic Set: 18 |
---|
263 | 0:29.3 8086:27CB 'USB3' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 Apic Set: 19 |
---|
264 | 0:29.7 8086:27CC 'USB7' IRQs: PCI:11 PIC:'LNKD':11 APIC:19 Apic Set: 19 |
---|
265 | 0:30.0 8086:2448 'PCI1' |
---|
266 | 0:31.0 8086:27B9 'LPC_' |
---|
267 | 0:31.2 8086:27C4 'SATA' IRQs: PCI:0 PIC:'LNKA':11 APIC:16 Apic Set: 16 |
---|
268 | 0:31.3 8086:27DA 'SMBU' IRQs: PCI:11 PIC:'LNKH':11 APIC:23 Apic Set: 23 |
---|
269 | 1:0.0 1002:7149 'VID_' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Apic Set: 16 MSI |
---|
270 | 2:0.0 8086:109A IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Apic Set: 16 MSI |
---|
271 | 3:0.0 8086:4227 IRQs: PCI:11 PIC:'LNKB':11 APIC:17 Apic Set: 17 MSI |
---|
272 | 21:0.0 104C:AC56 'CDBS' IRQs: PCI:11 PIC:'LNKA':11 APIC:16 Apic Set: 16 |
---|
273 | Max IRQ number in use - 23 |
---|
274 | Bus detected - 24 |
---|
275 | ************ AcpiInstall Power Device Status = 0 |
---|
276 | ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320] |
---|
277 | ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320] |
---|
278 | ************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE |
---|
279 | ************ AcpiInstall PMTimer Device Status = 0 |
---|
280 | ** Total use:265296 unuse:10008 count:5023 ** |
---|
281 | Get GpeHdl Status = 0 - AE_OK |
---|
282 | Event [MGPE] |
---|
283 | Event [_L18] |
---|
284 | Install GPE0x18 Status 0x0 |
---|
285 | Event [_L09] |
---|
286 | Install GPE0x9 Status 0x0 |
---|
287 | Event [_L01] |
---|
288 | Install GPE0x1 Status 0x0 |
---|
289 | Event [_L02] |
---|
290 | Install GPE0x2 Status 0x0 |
---|
291 | EndScan GPE Status 0 |
---|
292 | ===== Info ======== |
---|
293 | Int Level 9 |
---|
294 | In Xrupt F9000FB0 in arg F9000FB0 |
---|
295 | Node |
---|
296 | Name [_GPE] |
---|
297 | Flags: 0 |
---|
298 | Reg count 4 |
---|
299 | GPE0x1 Flag:0x4 Status - Set 0x0 Enable 0x0 |
---|
300 | GPE0x2 Flag:0x4 Status - Set 0x0 Enable 0x0 |
---|
301 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
302 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
303 | GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
304 | GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:6 BaseGPENumber:0 |
---|
305 | GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
306 | GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
307 | GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
308 | GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
309 | GPE1 Status:1029 Enable:102D EnableWake:3A EnableRun:0 BaseGPENumber:8 |
---|
310 | GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10 |
---|
311 | GPE0x18 Flag:0x2 Status - Set 0x0 Enable 0x0 |
---|
312 | GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0 |
---|
313 | GPE3 Status:102B Enable:102F EnableWake:1 EnableRun:10 BaseGPENumber:18 |
---|
314 | =========== Status 0x0 0 |
---|
315 | AcpiOsExecute type:1 |
---|
316 | AcpiOsExecute - direct executing |
---|
317 | *** Device Notify *** |
---|
318 | Dev: [THM0] Value:80 |
---|
319 | AcpiOsExecute type:1 |
---|
320 | AcpiOsExecute - direct executing |
---|
321 | *** Device Notify *** |
---|
322 | Dev: [THM1] Value:80 |
---|
323 | ************ Leave Sleep Status = 0x0 - AE_OK |
---|
324 | APM: PSD find success. PSD Ftable:F96B01D0 |
---|
325 | Register Notify 1st FFCF51CE |
---|
326 | FindPCIDevice |
---|
327 | Need: B:0 D:1F F:2 |
---|
328 | Finding APIC16 PIC11 Dev: [SATA] |
---|
329 | Gradd: PSD find success. PSD Ftable:F96B01D0 |
---|
330 | APM: Found Smart Battery "BAT0" |
---|
331 | APM: Found Smart Battery "BAT1" |
---|
332 | APM: Unknown design capacity |
---|
333 | APM: Found AC "AC__" |
---|
334 | ******** Event tread *************** |
---|
335 | APM: Setting suspend state:3 |
---|
336 | ******** Notify wait Counter 0 *************** |
---|
337 | AcpiExecSMPFunction: disable exec |
---|
338 | SetCPU to 0 need 0 wait 6 |
---|
339 | AcpiExecSMPFunction:Fun:0xFA23586C Ctx:FA274030 Flag:0xA00 Current CPU0 |
---|
340 | AcpiExecSMPFunction: wait CPUMask:0x3 |
---|
341 | Count:1 CPU1 FA274030 |
---|
342 | Count:2 CPU0 FA274030 |
---|
343 | CPU1 end |
---|
344 | CPU0 end |
---|
345 | AcpiExecSMPFunction: End |
---|
346 | AcpiWaitOBF timeout KEE 2 rc=640 |
---|
347 | AcpiWaitOBF timeout KEE 2 rc=640 |
---|
348 | AcpiWaitOBF timeout KEE 2 rc=640 |
---|
349 | AcpiWaitOBF timeout KEE 0 rc=640 |
---|
350 | AcpiWaitIBF timeout KEE 8 rc=640 |
---|
351 | Interrupt NOT Handled!!!! |
---|