| 1 | AllocIRQMem at 0xFFEA3000 (24576 bytes) |
|---|
| 2 | |
|---|
| 3 | PSD_install options:" " @#netlabs dot org:3.4#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Oct 31 2007 19:30:28 |
|---|
| 4 | MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0 |
|---|
| 5 | SS Selector fault |
|---|
| 6 | AcpiOsInitialize ALLOC size 65536 at 0xFA1B3000 |
|---|
| 7 | AcpiOsInitialize MapMem size 4096 at 0xFFEAD000 |
|---|
| 8 | AcpiOsCreateLock FA1B31F0 |
|---|
| 9 | AcpiOsCreateLock FA1B3208 |
|---|
| 10 | AcpiOsPredefinedOverride: "_REV" |
|---|
| 11 | AcpiOsPredefinedOverride: "_OS_" |
|---|
| 12 | AcpiOsPredefinedOverride: override to eComStation |
|---|
| 13 | AcpiOsPredefinedOverride: "_GL_" |
|---|
| 14 | AcpiOsCreateSemaphore: O.K. Handle=0xFA1B3428 M:1 I:0 |
|---|
| 15 | AcpiOsPredefinedOverride: "_OSI" |
|---|
| 16 | AcpiOsPredefinedOverride: override to eCS |
|---|
| 17 | *** AcpiInitializeSubsystem Status = 0 *** |
|---|
| 18 | ACPI: RSDP @ 0xF6A20/0x14 (v0 VIA694) |
|---|
| 19 | ACPI: RSDT @ 0x1FFF3000/0x28 (v1 VIA694 AWRDACPI 0x42302E31 AWRD 0x0) |
|---|
| 20 | ACPI: FACP @ 0x1FFF3040/0x74 (v1 VIA694 AWRDACPI 0x42302E31 AWRD 0x0) |
|---|
| 21 | ACPI: DSDT @ 0x1FFF30C0/0x3147 (v1 VIA694 AWRDACPI 0x1000 MSFT 0x100000E) |
|---|
| 22 | ACPI: FACS @ 0x1FFF0000/0x40 |
|---|
| 23 | *** AcpiInitializeTables Status = 0 *** |
|---|
| 24 | AcpiOsTableOverride Ex:FFDFC0C0 New:FFDEADA4 SIG:[DSDT] |
|---|
| 25 | *** AcpiLoadTables Status = 0 *** |
|---|
| 26 | Table [DSDT] |
|---|
| 27 | Table [FACS] |
|---|
| 28 | Table [FACP] |
|---|
| 29 | Size of FACDT 244 |
|---|
| 30 | Type of computer - Unspecified |
|---|
| 31 | System vector the SCI interrupt is wired to in 8259 mode. 9 |
|---|
| 32 | System port address of the SMI Command Port 0x402F |
|---|
| 33 | The value to write to SMI_CMD to disable SMI 0xA1 |
|---|
| 34 | The value to write to SMI_CMD to re-enable SMI 0xA0 |
|---|
| 35 | The value to write to SMI_CMD to enter the S4BIOS state 0x0 |
|---|
| 36 | System port address of the PM1a Event Register Block 4000 |
|---|
| 37 | System port address of the PM1b Event Register Block 0 |
|---|
| 38 | Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 |
|---|
| 39 | System port address of the PM1a Control Register Block 40F0 |
|---|
| 40 | System port address of the PM1b Control Register Block 0 |
|---|
| 41 | Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 |
|---|
| 42 | System port address of the PM2 Control Register Block 0 |
|---|
| 43 | System port address of the Power Management Timer Control Register Block 4008 |
|---|
| 44 | Number of bytes decoded by PM_TMR_BLK (=4) 4 |
|---|
| 45 | System port address of General-Purpose Event 0 Register Block 4020 |
|---|
| 46 | System port address of General-Purpose Event 1 Register Block 0 |
|---|
| 47 | Number of bytes decoded by GPE0_BLK 0x4 |
|---|
| 48 | Number of bytes decoded by GPE1_BLK 0x0 |
|---|
| 49 | Offset within the ACPI general-purpose event model where GPE1 based events start 0 |
|---|
| 50 | GPE enable register: 0: 0 |
|---|
| 51 | GPE status register: 0: 0 |
|---|
| 52 | The worst-case hardware latency to enter and exit a C2 state 90 us |
|---|
| 53 | The worst-case hardware latency to enter and exit a C3 state 900 us |
|---|
| 54 | The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 0 |
|---|
| 55 | The RTC CMOS RAM index to the day-of-month alarm value 125 |
|---|
| 56 | The RTC CMOS RAM index to the month of year alarm value 126 |
|---|
| 57 | The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50 |
|---|
| 58 | IA-PC Boot Architecture Flags 0x0 |
|---|
| 59 | Fixed feature flags 4A5 |
|---|
| 60 | The reset register: |
|---|
| 61 | Type of address space - System Memory |
|---|
| 62 | Register Bit Width 0 |
|---|
| 63 | Register Bit Offset 0 |
|---|
| 64 | Access size 0 |
|---|
| 65 | Address 0 |
|---|
| 66 | The value to write to the RESET_REG port to reset the system 0 |
|---|
| 67 | ***** Throttl Width 0 Offset 0 |
|---|
| 68 | AcpiOsInstallIntterrupHandler IRQ9 handler FA340F69 |
|---|
| 69 | ************ AcpiEnableSubsystem Status = 0 |
|---|
| 70 | AcpiOsDerivePCIID([PCI0] ,[VTSB],) Bus:0 Dev:17 Fun:0 - Derive: Bus:0 Dev:17 Fun:0 |
|---|
| 71 | ************ Scan EC Status = 0 |
|---|
| 72 | ************ AcpiInitializeObjects mask:0 Status = 0 |
|---|
| 73 | Processor [CPU0] |
|---|
| 74 | Status 0x0 0 |
|---|
| 75 | Status Evaluate Processor PDC 0x5 AE_NOT_FOUND |
|---|
| 76 | Status Evaluate Processor 0x0 AE_OK |
|---|
| 77 | Usable:1 Counter:0 |
|---|
| 78 | CPU id to N:0 |
|---|
| 79 | ProcId: 0x0 |
|---|
| 80 | P_BLK: 0x4010 |
|---|
| 81 | P_BLK len: 0x6 |
|---|
| 82 | CPU0 Status Evaluate _PCT 0x5 AE_NOT_FOUND |
|---|
| 83 | CPU0 Status Evaluate _CST 0x5 AE_NOT_FOUND |
|---|
| 84 | ************ AcpiInstallNotifyHandler System Status = 0 |
|---|
| 85 | ************ AcpiInstallNotifyHandler Device Status = 0 |
|---|
| 86 | 0:0.0 Class:600 Hdr:0 Bridge H->0 |
|---|
| 87 | 0:1.0 Class:604 Hdr:1 Bridge 0->1 |
|---|
| 88 | 0:8.0 Class:100 Hdr:0 |
|---|
| 89 | 0:16.0 Class:C03 Hdr:80 |
|---|
| 90 | 0:16.1 Class:C03 Hdr:80 |
|---|
| 91 | 0:16.2 Class:C03 Hdr:80 |
|---|
| 92 | 0:16.3 Class:C03 Hdr:0 |
|---|
| 93 | 0:17.0 Class:601 Hdr:80 |
|---|
| 94 | 0:17.1 Class:101 Hdr:0 |
|---|
| 95 | 0:17.5 Class:401 Hdr:0 |
|---|
| 96 | 0:18.0 Class:200 Hdr:0 |
|---|
| 97 | 1:0.0 Class:300 Hdr:0 |
|---|
| 98 | PCI Bus scan: 2 PCI buses found. |
|---|
| 99 | Scan ACPI tree for PCI functions |
|---|
| 100 | 0:0.0 'PCI0' (FA1B72B8) |
|---|
| 101 | 0:17.0 'VT86' (FA1B7750) |
|---|
| 102 | 0:17.1 'IDE0' (FA1B7978) |
|---|
| 103 | 0:17.2 'USB0' (FA1B86E8) |
|---|
| 104 | 0:17.3 'USB1' (FA1B87C0) |
|---|
| 105 | 0:17.4 'USB2' (FA1B8898) |
|---|
| 106 | 0:16.0 'USB6' (FA1B8970) |
|---|
| 107 | 0:16.1 'USB7' (FA1B8A48) |
|---|
| 108 | 0:16.2 'USB8' (FA1B8B20) |
|---|
| 109 | 0:16.3 'USB9' (FA1B8BF8) |
|---|
| 110 | 0:18.0 'LAN0' (FA1B8CD0) |
|---|
| 111 | 0:17.5 'AC97' (FA1B8D48) |
|---|
| 112 | 0:17.6 'MC97' (FA1B8D98) |
|---|
| 113 | Bridges found: |
|---|
| 114 | 0:0.0 class:600 type: 0 Bus H->0 ACPI: 'PCI0' (FA1B72B8) _PRT |
|---|
| 115 | 0:1.0 class:604 type: 1 Bus 0->1 |
|---|
| 116 | IRQLinks found: |
|---|
| 117 | 0: 'LNKA' (FA1B8F30) P[ 1, 3, 4, 5, 6, 7, 10,*11, 12, 14, 15] <- 1:0.0 0:18.0 0:17.1 0:16.0 0:8.0 |
|---|
| 118 | A[] |
|---|
| 119 | 1: 'LNKB' (FA1B9188) P[ 1,*3, 4, 5, 6, 7, 10, 11, 12, 14, 15] <- 0:16.1 |
|---|
| 120 | A[] |
|---|
| 121 | 2: 'LNKC' (FA1B93E0) P[ 1, 3, 4, 5, 6, 7,*10, 11, 12, 14, 15] <- 0:17.5 0:16.2 |
|---|
| 122 | A[] |
|---|
| 123 | 3: 'LNKD' (FA1B9638) P[ 1, 3, 4,*5, 6, 7, 10, 11, 12, 14, 15] <- 0:16.3 |
|---|
| 124 | A[] |
|---|
| 125 | PCI devices found: |
|---|
| 126 | 0:0.0 1106:3099 'PCI0' |
|---|
| 127 | 0:1.0 1106:B099 |
|---|
| 128 | 0:8.0 9004:7178 IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 129 | 0:16.0 1106:3038 'USB6' IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 130 | 0:16.1 1106:3038 'USB7' IRQs: PCI:3 PIC:'LNKB':3 APIC:0 |
|---|
| 131 | 0:16.2 1106:3038 'USB8' IRQs: PCI:10 PIC:'LNKC':10 APIC:0 |
|---|
| 132 | 0:16.3 1106:3104 'USB9' IRQs: PCI:5 PIC:'LNKD':5 APIC:0 |
|---|
| 133 | 0:17.0 1106:3177 'VT86' |
|---|
| 134 | 0:17.1 1106:571 'IDE0' IRQs: PCI:0 PIC:'LNKA':11 APIC:0 |
|---|
| 135 | 0:17.5 1106:3059 'AC97' IRQs: PCI:10 PIC:'LNKC':10 APIC:0 |
|---|
| 136 | 0:18.0 1106:3065 'LAN0' IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 137 | 1:0.0 1002:514C IRQs: PCI:11 PIC:'LNKA':11 APIC:0 |
|---|
| 138 | Bus detected - 1 |
|---|
| 139 | ************ AcpiInstall Power Device Status = 0 |
|---|
| 140 | ************ AcpiInstall Sleep Device Status = 0 - AE_OK |
|---|
| 141 | ************ AcpiInstall PMTimer Device Status = 0 |
|---|
| 142 | ** Total use:92912 unuse:848 count:1444 ** |
|---|
| 143 | Get GpeHdl Status = 0 - AE_OK |
|---|
| 144 | Event [_L03] |
|---|
| 145 | Install GPE0x3 Status 0x0 |
|---|
| 146 | Event [_L05] |
|---|
| 147 | Install GPE0x5 Status 0x0 |
|---|
| 148 | Event [_L08] |
|---|
| 149 | Install GPE0x8 Status 0x0 |
|---|
| 150 | Event [_L09] |
|---|
| 151 | Install GPE0x9 Status 0x0 |
|---|
| 152 | Event [_L0E] |
|---|
| 153 | Install GPE0xE Status 0x0 |
|---|
| 154 | Event [_L04] |
|---|
| 155 | Install GPE0x4 Status 0x0 |
|---|
| 156 | Event [_L0A] |
|---|
| 157 | Install GPE0xA Status 0x0 |
|---|
| 158 | Event [_L0D] |
|---|
| 159 | Install GPE0xD Status 0x0 |
|---|
| 160 | EndScan GPE Status 0 |
|---|
| 161 | ===== Info ======== |
|---|
| 162 | Int Level 9 |
|---|
| 163 | In Xrupt FA1BF5F8 in arg FA1BF5F8 |
|---|
| 164 | Node |
|---|
| 165 | Name [_GPE] |
|---|
| 166 | Flags: 0 |
|---|
| 167 | Reg count 2 |
|---|
| 168 | GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 169 | GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 170 | GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 171 | GPE0 Status:4020 Enable:4022 EnableWake:38 EnableRun:0 BaseGPENumber:0 |
|---|
| 172 | GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 173 | GPE0x9 Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 174 | GPE0xA Flag:0x4 Status - Set 0x0 Enable 0x0 |
|---|
| 175 | GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 176 | GPE0xE Flag:0x2 Status - Set 0x0 Enable 0x0 |
|---|
| 177 | GPE1 Status:4021 Enable:4023 EnableWake:63 EnableRun:4 BaseGPENumber:8 |
|---|
| 178 | =========== Status 0x0 0 |
|---|
| 179 | ACPI Error (dsmthdat-551): Uninitialized Local[0] at node FA1AA11C [20070320] |
|---|
| 180 | AcpiOsExecute type:1 |
|---|
| 181 | AcpiOsExecute - direct executing |
|---|
| 182 | *** System Notify *** |
|---|
| 183 | Dev: [PWRB] Value:2 |
|---|
| 184 | ACPI Error (dsmthdat-551): Uninitialized Local[0] at node FA1AA11C [20070320] |
|---|
| 185 | ************ Leave Sleep Status = 0x0 - AE_OK |
|---|
| 186 | FindPCIDevice |
|---|
| 187 | Need: B:0 D:11 F:1 |
|---|
| 188 | Finding APIC0 PIC11 Dev: [IDE0] |
|---|
