Ticket #141: ACPICA.LOG

File ACPICA.LOG, 11.0 KB (added by Chuck McKinnis, 13 years ago)
Line 
1AllocIRQMem at 0xFFEA3000 (24576 bytes)
2@#netlabs dot org:3.4#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Oct 31 2007 19:30:28
3MPDATA:FFECC000 ESP:FFECCA70 Sel:0 UsCPU:0
4SS Selector fault
5AcpiOsInitialize ALLOC size 65536 at 0xF9A03000
6AcpiOsInitialize MapMem size 4096 at 0xFFE8F000
7AcpiOsCreateLock F9A031F0
8AcpiOsCreateLock F9A03208
9AcpiOsPredefinedOverride: "_REV"
10AcpiOsPredefinedOverride: "_OS_"
11AcpiOsPredefinedOverride: override to eComStation
12AcpiOsPredefinedOverride: "_GL_"
13AcpiOsCreateSemaphore: O.K. Handle=0xF9A03428 M:1 I:0
14AcpiOsPredefinedOverride: "_OSI"
15AcpiOsPredefinedOverride: override to eCS
16*** AcpiInitializeSubsystem Status = 0 ***
17ACPI: RSDP @ 0xF6970/0x14 (v0 TOSCPL)
18ACPI: RSDT @ 0x3FEF522C/0x38 (v1 TOSCPL  0x6040000  LTP 0x0)
19ACPI: FACP @ 0x3FEFAEEC/0x74 (v1 TOSCPL MONTARA  0x6040000 PTL  0x50)
20ACPI: DSDT @ 0x3FEF5A9E/0x544E (v1 TOSCPL MONTARAG 0x6040000 MSFT 0x100000E)
21ACPI: FACS @ 0x3FEFBFC0/0x40
22ACPI: APIC @ 0x3FEFAF98/0x68 (v1 INTEL  MONTARA  0x6040000 LOHR 0x64)
23ACPI: SSDT @ 0x3FEF5655/0x2FB (v1 PmRef Cpu0Ist 0x3000 INTL 0x20030224)
24ACPI: SSDT @ 0x3FEF547D/0x1D8 (v1 PmRef Cpu0Cst 0x3001 INTL 0x20030224)
25ACPI: SSDT @ 0x3FEF5264/0x219 (v1 PmRef CpuPm 0x3000 INTL 0x20030224)
26*** AcpiInitializeTables Status = 0 ***
27AcpiOsTableOverride Ex:FFE89A9E New:FFDEADA4 SIG:[DSDT]
28*** AcpiLoadTables Status = 0 ***
29Table [DSDT]
30Table [FACS]
31Table [FACP]
32Table [APIC]
33Local APIC address: FEE00000h
34System also has 8259
35APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
36APIC_PROCESSOR: ProcID 1h LocalApicID 1h - not usable
37APIC_IO: IO ApicID 1h addr FEC00000h INTI 0
38APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spec Trigger by: Bus spec
39APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
40APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
41APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
42Table [SSDT]
43Table [SSDT]
44Table [SSDT]
45Size of FACDT 244
46Type of computer - Unspecified
47System vector the SCI interrupt is wired to in 8259 mode. 9
48System port address of the SMI Command Port 0xB2
49The value to write to SMI_CMD to disable SMI   0xF0
50The value to write to SMI_CMD to re-enable SMI 0xF1
51The value to write to SMI_CMD to enter the S4BIOS state 0x0
52The value OSPM writes to the SMI_CMD register to assume processor performance state control responsibility. 0x80
53System port address of the PM1a Event Register Block 1000
54System port address of the PM1b Event Register Block 0
55Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
56System port address of the PM1a Control Register Block 1004
57System port address of the PM1b Control Register Block 0
58Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
59System port address of the PM2 Control Register Block 1020
60Number of bytes decoded by PM2_CNT_BLK 1
61System port address of the Power Management Timer Control Register Block 1008
62Number of bytes decoded by PM_TMR_BLK (=4) 4
63System port address of General-Purpose Event 0 Register Block 1028
64System port address of General-Purpose Event 1 Register Block 0
65Number of bytes decoded by GPE0_BLK 0x8
66Number of bytes decoded by GPE1_BLK 0x0
67Offset within the ACPI general-purpose event model where GPE1 based events start 0
68GPE enable register: 0: 0: 0: 0
69GPE status register: 0: 0: FF: 8
70The value OSPM writes to the SMI_CMD register to indicate OS support for the _CST object and C States Changed notification 0x85
71The worst-case hardware latency to enter and exit a C2 state 1 us
72The worst-case hardware latency to enter and exit a C3 state 85 us
73The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
74The bit width of the processor's duty cycle setting value in the P_CNT register 3
75The RTC CMOS RAM index to the day-of-month alarm value 13
76The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
77IA-PC Boot Architecture Flags 0x0
78Fixed feature flags A5
79The reset register:
80Type of address space - System Memory
81Register Bit Width  0
82Register Bit Offset 0
83Access size 0
84Address 0
85The value to write to the RESET_REG port to reset the system 0
86***** Throttl Width 3 Offset 1
87AcpiOsInstallIntterrupHandler IRQ9 handler F9B90F69
88************ AcpiEnableSubsystem Status = 0
89AcpiOsDerivePCIID([PCI0] ,[LPCR],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun:0
90Device [EC0_]
91 Set DATA to IO:[1 0x62 - 0x62 Al:1 Len:1]
92 Set Control to IO:[1 0x66 - 0x66 Al:1 Len:1]
93 Set Control to END_TAG Checksum:0
94GPE 1C EC
95Find 1 EC
96************ Scan EC Status = 1
97************ AcpiInstallAddressSpaceHandler N0 EC Status = 0 count 1 ECadr:F9B61C8C - AE_OK
98************ AcpiInitializeObjects mask:0 Status = 0
99Processor [CPU0]
100Processor [CPU1]
101Status 0x0 0
102Status Evaluate Processor PDC 0x0 AE_OK
103Status Evaluate Processor 0x0 AE_OK
104Status C 0x0 AE_OK
105Usable:1 Counter:0
106 CPU id to N:0
107 ProcId:     0x0
108 P_BLK:      0x1010
109 P_BLK len:  0x6
110CPU0 Status Evaluate _PCT 0x0 AE_OK
111 Perf control:  0xB2
112 Perf status:  0xB3
113CPU0 Status Evaluate _CST 0x0 AE_OK
114_CST has 4 Cstates
115 C1State control:  0x0
116 Latency: 1 uSec
117 Power consuption: 1000 mWatt
118 C2State control:  0x1014
119 Latency: 1 uSec
120 Power consuption: 500 mWatt
121 C3State control:  0x1015
122 Latency: 85 uSec
123 Power consuption: 250 mWatt
124 C3State control:  0x1016
125 Latency: 185 uSec
126 Power consuption: 100 mWatt
127************ AcpiInstallNotifyHandler System Status = 0
128************ AcpiInstallNotifyHandler Device Status = 0
1290:0.0  Class:600  Hdr:80   Bridge H->0
1300:0.1  Class:880  Hdr:0
1310:0.3  Class:880  Hdr:80
1320:1.0  Class:604  Hdr:1   Bridge 0->1
1330:29.0  Class:C03  Hdr:80
1340:29.1  Class:C03  Hdr:0
1350:29.2  Class:C03  Hdr:0
1360:29.7  Class:C03  Hdr:0
1370:30.0  Class:604  Hdr:1   Bridge 0->2
1380:31.0  Class:601  Hdr:80
1390:31.1  Class:101  Hdr:0
1400:31.3  Class:C05  Hdr:0
1410:31.5  Class:401  Hdr:0
1420:31.6  Class:703  Hdr:0
1431:0.0  Class:300  Hdr:0
1442:0.0  Class:C00  Hdr:0
1452:1.0  Class:200  Hdr:0
1462:2.0  Class:280  Hdr:0
1472:4.0  Class:607  Hdr:82   Bridge 0->02:4.1  Class:501  Hdr:80
1482:4.2  Class:805  Hdr:80
1492:4.3  Class:501  Hdr:80
150PCI Bus scan: 3 PCI buses found.
151Scan ACPI tree for PCI functions
152AcpiOsDerivePCIID([PCI0] ,[HBUS],) Bus:0 Dev:0 Fun:0 - Derive: Bus:0 Dev:0 Fun:0
153AcpiOsDerivePCIID([PCI0] ,[MBUS],) Bus:0 Dev:0 Fun:1 - Derive: Bus:0 Dev:0 Fun:1
1540:0.0  'PCI0' (F9A06D00)
1550:0.1  'MBUS' (F9A07438)
1560:1.0  'AGPB' (F9A07608)
1571:0.0  'VGA_' (F9A076F0)
1580:30.0  'PCIB' (F9A08210)
1592:1.0  'ELAN' (F9A082C0)
1602:4.0  'CB1_' (F9A08398)
1610:31.0  'LPCB' (F9A08568)
1620:29.0  'USB1' (F9A05080)
1630:29.1  'USB2' (F9A0F778)
1640:29.2  'USB3' (F9A0FA30)
1650:29.7  'EUSB' (F9A0FCE8)
1660:31.1  'IDEC' (F9A0FE00)
1670:31.3  'SBUS' (F9A10A90)
1680:31.5  'AUD0' (F9A11128)
1690:31.6  'MODM' (F9A11178)
170Bridges found:
1710:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9A06D00) _PRT
1720:1.0  class:604  type: 1  Bus 0->1  ACPI: 'AGPB' (F9A07608) _PRT
1730:30.0  class:604  type: 1  Bus 0->2  ACPI: 'PCIB' (F9A08210) _PRT
174IRQLinks found:
1750: 'LNKA' (F9A085B8)  P[ 1, 3, 4, 5, 6, 7,*10, 12, 14, 15] <- 2:4.0 1:0.0 0:29.0
176                       A[]
1771: 'LNKD' (F9A08C18)  P[ 1, 3, 4,*5, 6, 7, 11, 12, 14, 15] <- 0:29.1
178                       A[]
1792: 'LNKC' (F9A089F8)  P[ 1, 3,*4, 5, 6, 7, 10, 12, 14, 15] <- 0:31.1 0:29.2
180                       A[]
1813: 'LNKH' (F9A09498)  P[ 1, 3, 4, 5, 6, 7,*11, 12, 14, 15] <- 0:29.7
182                       A[]
1834: 'LNKB' (F9A087D8)  P[ 1, 3, 4, 5, 6, 7,*11, 12, 14, 15] <- 2:4.3 2:4.2 2:4.1 0:31.6 0:31.5 0:31.3
184                       A[]
1855: 'LNKE' (F9A08E38)  P[ 1, 3, 4, 5, 6, 7, 10, 12, 14, 15] <- 2:0.0
186                       A[]
1876: 'LNKF' (F9A09058)  P[ 1, 3, 4, 5, 6, 7,*11, 12, 14, 15] <- 2:1.0
188                       A[]
1897: 'LNKG' (F9A09278)  P[ 1, 3, 4, 5, 6, 7, 10, 12, 14, 15] <- 2:2.0
190                       A[]
191PCI devices found:
1920:0.0  8086:3580  'PCI0'
1930:0.1  8086:3584  'MBUS'
1940:0.3  8086:3585       
1950:1.0  8086:3581  'AGPB'
1960:29.0  8086:24C2  'USB1'  IRQs: PCI:10 PIC:'LNKA':10 APIC:16
1970:29.1  8086:24C4  'USB2'  IRQs: PCI:5 PIC:'LNKD':5 APIC:19
1980:29.2  8086:24C7  'USB3'  IRQs: PCI:4 PIC:'LNKC':4 APIC:18
1990:29.7  8086:24CD  'EUSB'  IRQs: PCI:11 PIC:'LNKH':11 APIC:23
2000:30.0  8086:2448  'PCIB'
2010:31.0  8086:24CC  'LPCB'
2020:31.1  8086:24CA  'IDEC'  IRQs: PCI:0 PIC:'LNKC':4 APIC:18
2030:31.3  8086:24C3  'SBUS'  IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2040:31.5  8086:24C5  'AUD0'  IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2050:31.6  8086:24C6  'MODM'  IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2061:0.0  1002:4E50  'VGA_'  IRQs: PCI:10 PIC:'LNKA':10 APIC:16
2072:0.0  1106:3044          IRQs: PCI:11 PIC:'LNKE': R 11 APIC:20
2082:1.0  10EC:8139  'ELAN'  IRQs: PCI:11 PIC:'LNKF':11 APIC:21
2092:2.0  8086:4220          IRQs: PCI:11 PIC:'LNKG': R 11 APIC:22
2102:4.0  1524:1411  'CB1_'  IRQs: PCI:0 PIC:'LNKA':10 APIC:16
2112:4.1  1524:530          IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2122:4.2  1524:550          IRQs: PCI:11 PIC:'LNKB':11 APIC:17
2132:4.3  1524:520          IRQs: PCI:11 PIC:'LNKB':11 APIC:17
214Bus detected - 2
215************ AcpiInstall Power Device Status = 0
216ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
217ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
218************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
219************ AcpiInstall PMTimer Device Status = 0
220Install GPE Status 0
221GpeSetType Status = 0 - AE_OK
222EC[0] GPE1C GpeEnable Status = 0 - AE_OK
223** Total use:124864 unuse:632 count:2107 **
224Get GpeHdl Status = 0 - AE_OK
225Event [_L03]
226Install GPE0x3  Status 0x0
227Event [_L04]
228Install GPE0x4  Status 0x0
229Event [_L05]
230Install GPE0x5  Status 0x0
231Event [_L08]
232Install GPE0x8  Status 0x0
233Event [_L0B]
234Install GPE0xB  Status 0x0
235Event [_L0C]
236Install GPE0xC  Status 0x0
237Event [_L0D]
238Install GPE0xD  Status 0x0
239Event [_L1D]
240Install GPE0x1D  Status 0x0
241EndScan GPE Status 0
242===== Info ========
243Int Level 9
244In Xrupt F99F7FF0 in arg F99F7FF0
245      Node
246Name [_GPE]
247Flags: 0
248Reg count 4
249GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
250GPE0x4 Flag:0x2 Status - Set 0x0 Enable 0x0
251GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
252GPE0 Status:1028 Enable:102C EnableWake:38 EnableRun:0 BaseGPENumber:0
253GPE0x8 Flag:0x2 Status - Set 0x0 Enable 0x0
254GPE0xB Flag:0x4 Status - Set 0x0 Enable 0x0
255GPE0xC Flag:0x2 Status - Set 0x0 Enable 0x0
256GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
257GPE1 Status:1029 Enable:102D EnableWake:31 EnableRun:8 BaseGPENumber:8
258GPE2 Status:102A Enable:102E EnableWake:0 EnableRun:0 BaseGPENumber:10
259GPE0x1C Flag:0x4 Status - Set 0x0 Enable 0x0
260GPE0x1D Flag:0x4 Status - Set 0x0 Enable 0x0
261GPE3 Status:102B Enable:102F EnableWake:0 EnableRun:30 BaseGPENumber:18
262=========== Status 0x0 0
263************ Leave Sleep Status = 0x5 - AE_NOT_FOUND
264APM: PSD find success. PSD Ftable:F9B601C0
265Register Notify 1st FD46018E
266FindPCIDevice
267 Need: B:0 D:1F F:1
268Finding APIC18 PIC4 Dev: [IDEC]
269APM: Found AC "ACAD"
270APM: Found Smart Battery "BAT1"
271******** Event tread ***************
272APM: Unsetting suspend state
273******** Notify wait Counter 0 ***************