Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 6
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2570h 82865G/PE/P DRAM Controller/Host-Hub Interface
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 12BC103Ch d330 uT
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F4000000h
 New Capabilities List Present:
   Vendor-Dependant Capability
   AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
     AGP Speed(s) Supported : 4x 8x 
     FW Transfers Supported : Yes
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     AGP v3.0 Operation Mode Available : Yes
     Isosynchronous Transactions Supported : No
     Maximum Command Queue Length : 32 bytes
     AGP Speed Selected : 8x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     AGP v3.0 Operation Mode : Enabled
     Current Command Queue Length : 1 byte

 Bus 0 (PCI), Device Number 1, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2571h 82865G/PE/P PCI to AGP Controller
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
 Revision 02h, Header Type 01h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 0008h (VGA mapping)
   Secondary Bus Status  22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 20h
   I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : F0500000h..F07FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : D0000000h..F01FFFFFh

 Bus 0 (PCI), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 24D2h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3440h..3453h
 System IRQ 10, INT# A

 Bus 0 (PCI), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 24D4h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3460h..3473h
 System IRQ 11, INT# B

 Bus 0 (PCI), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 24D7h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3480h..3493h
 System IRQ 10, INT# C

 Bus 0 (PCI), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 24DDh 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : F0A00000h..F0A000FFh
 System IRQ 10, INT# D
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 244Eh 82801 PCI Bridge
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0080h (Supports Back-To-Back Trans., Fast Timing)
 Revision C2h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 5, Subordinate Bus number 5
   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 40h
   I/O Port Range Passed to Secondary Bus : 1000h..1FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : F0200000h..F04FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None

 Bus 0 (PCI), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 24D0h 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
 Command 010Fh (I/O Access, Memory Access, BusMaster, Special Cycles,
   System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA

 Bus 0 (PCI), Device Number 31, Device Function 1
 Vendor 8086h Intel Corporation
 Device 24DBh 82801EB/ER (ICH5/ICH5R) IDE Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is an I/O Port : 34E0h
 Address 1 is an I/O Port : 3800h
 Address 2 is an I/O Port : 34E8h
 Address 3 is an I/O Port : 3804h
 Address 4 is an I/O Port : 34C0h
 System IRQ 10, INT# A

 Bus 0 (PCI), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 24D1h 82801EB (ICH5) SATA Controller
 Command 0005h (I/O Access, BusMaster)
 Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is an I/O Port : 34F0h..34F7h
 Address 1 is an I/O Port : 3808h
 Address 2 is an I/O Port : 34F8h..34FFh
 Address 3 is an I/O Port : 380Ch
 Address 4 is an I/O Port : 34D0h..34D7h
 System IRQ 10, INT# A

 Bus 0 (PCI), Device Number 31, Device Function 5
 Vendor 8086h Intel Corporation
 Device 24D5h 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 12BC103Ch d330 uT
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is an I/O Port : 3000h..30FFh
 Address 1 is an I/O Port : 3400h..343Fh
 Address 2 is a Memory Address (0-4GiB) : F0A00400h..F0A005FFh
 Address 3 is a Memory Address (0-4GiB) : F0A00600h..F0A006FFh
 System IRQ 5, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 1002h ATI Technologies Inc
 Device 4152h RV350 AR [Radeon 9600]
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 00h, Header Type 80h, Bus Latency Timer 42h
 Minimum Bus Grant 08h, Maximum Bus Latency 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Display, type VGA
 Subsystem ID 41521787h Radeon 9600 XT (Guess Only!)
 Subsystem Vendor 1787h Hightech Information System Ltd.
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
 Address 1 is an I/O Port : 2000h
 Address 2 is a Memory Address (0-4GiB) : F0500000h
 System IRQ 10, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
     AGP Speed(s) Supported : 4x 8x 
     FW Transfers Supported : Yes
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     AGP v3.0 Operation Mode Available : Yes
     Isosynchronous Transactions Supported : No
     Maximum Command Queue Length : 256 bytes
     AGP Speed Selected : 8x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     AGP v3.0 Operation Mode : Enabled
     Current Command Queue Length : 1 byte
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 1
 Vendor 1002h ATI Technologies Inc
 Device 4172h RV350 AR [Radeon 9600] (Secondary)
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 00h, Header Type 00h, Bus Latency Timer 42h
 Minimum Bus Grant 08h, Maximum Bus Latency 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Display, type Other
 Subsystem ID 41531787h Radeon 9600 XT (Secondary) (Guess Only!)
 Subsystem Vendor 1787h Hightech Information System Ltd.
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h
 Address 1 is a Memory Address (0-4GiB) : F0510000h
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 5 (PCI), Device Number 2, Device Function 0
 Vendor 14E4h Broadcom Corporation
 Device 1696h NetXtreme BCM5782 Gigabit Ethernet
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 40h, Maximum Bus Latency 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 12BC103Ch d530 CMT (DG746A)
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : F0400000h
 CIS can read from expansion ROM image 0, offset 00h
 System IRQ 5, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
     10000 mW D0 power consume
     10000 mW D0 power dissipate
         0 mW D1 power consume
         0 mW D1 power dissipate
         0 mW D2 power consume
         0 mW D2 power dissipate
      1000 mW D3 power consume
      1000 mW D3 power dissipate
         0 mW common logic power consume
   Vital Product Data Capability
     Identifier          Broadcom NetXtreme Gigabit Ethernet Controller 
     Part Number         BCM95782A50
     EC Level (Version)  106679-15
     Serial Number       0123456789
     Manufacturer ID     14e4
     Checksum/End        7Dh 25*00h 
     System Specific     XYZ01234567
     Remaining RW Area   107*00h 
     End Tag
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses

 Bus 5 (PCI), Device Number 10, Device Function 0
 Vendor 9004h Adaptec
 Device 8178h AHA-2940U/UW/D / AIC-7881U
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 08h, Maximum Bus Latency 08h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Storage, type SCSI
 Subsystem ID 78819004h AHA-2940UW SCSI Host Adapter
 Subsystem Vendor 9004h Adaptec
 Address 0 is an I/O Port : 1000h..100Fh
 Address 1 is a Memory Address (0-4GiB) : F0410000h
 System IRQ 10, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:54F0h
 Table Version 1.0 - OK
 Table size 192 bytes - OK
 Table Checksum CDh - OK
 PCI Interrupt Router: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 5,10,11,14,15 are used by PCI devices
Shared IRQs: IRQ 5 is shared by 2 PCI Devices
             IRQ 10 is shared by 7 PCI Devices
