id	summary	reporter	owner	description	type	status	priority	component	version	resolution	keywords	cc
78	v10.197 does not recognize mass storage (stick)	ecs273	Lars Erdmann	"There is no trap.  Inserting stick does nothing.  I have one with an access light, it shows nothing.  There is nothing shown on the neowps usb widget to eject.  There is no beep inserting or pulling out.  USB mouse works fine.  Using ps2 keyboard.

If I boot with the stick inserted then it works and I can read it.  I can eject it normally with neowps widget.  But re-insertion does nothing.  The stick works normally in other eCS computers.  The stick works normally w/ v10.162 drivers.

Running eCS v2.1, kernel 14.105 w/ four cores, acpi 3.22.01.  No switches.

snipped config.sys showing usb statements:
==========
rem ..DEVICE=C:\OS2\BOOT\USBPRT.SYS
DEVICE=C:\ECS\SYSTEM\AMouse\AMOUSE.SYS SMP
DEVICE=C:\ECS\SYSTEM\AMouse\USBMOUSE.SYS /V
..<snip>..
rem ..DEVICE=C:\OS2\BOOT\USBKBD.SYS
..<snip>..
REM DEVICE=C:\OS2\BOOT\USBCOM.SYS
..<snip>..
IFS=C:\ECS\BOOT\EVFS.IFS
DEVICE=C:\ecs\boot\USBRESMG.SYS /V
..<snip>..
BASEDEV=CHKDSK.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBOHCD.SYS
BASEDEV=USBEHCD.SYS
BASEDEV=USBEHCD.SYS
BASEDEV=USBD.SYS
BASEDEV=USBHID.SYS
..<snip>..
REM  BASEDEV=IBM2FLPY.ADD
BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:1
==========
attaching:
usb197-1.txt trace with stick inserted
usb197-2.txt trace booted with stick inserted
pcirpt.txt = pci -D

The drivers I am using are from files usbhcd197.zip & usbhid197.zip.  When I revert to v10.162 I keep the hid197 files installed, reverting only from the 5 drivers in hcd197.

I note that it takes nearly 4x longer to boot w/ 10.162 vs 10.197

Rgds, Jon"	defect	closed	major	basedrv	10.197	fixed	msd stick