Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."

PCI BIOS Version 2.10 found!
Number of PCI Busses : 2
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI), Device Number 0, Device Function 0
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 0735h SiS735 CPU to PCI Bridge
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 20h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Address 0 is a Memory Address (0-4GiB) : D0000000h..D3FFFFFFh
 New Capabilities List Present:
   AGP Capability, Version 2.0 (AGP 4x and below support)
     AGP Speed(s) Supported : 1x 2x 4x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     Maximum Command Queue Length : 32 bytes
     AGP Speed Selected : 4x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : No
     Current Command Queue Length : 1 byte

 Bus 0 (PCI), Device Number 1, Device Function 0
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 0001h Virtual PCI to PCI Bridge
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0000h
 Revision 00h, Header Type 01h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 40h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : CDE00000h..CFEFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : C5B00000h..CDCFFFFFh

 Bus 0 (PCI), Device Number 2, Device Function 0
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 0008h SiS PCI to ISA Bridge (LPC Bridge)
 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
 Status 0200h (Medium Timing)
 Revision 00h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA

 Bus 0 (PCI), Device Number 2, Device Function 2
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 7001h SiS5597/8 Universal Serial Bus Controller
 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
   System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 07h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 00h, Maximum Bus Latency 50h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB (OHCI)
 Subsystem ID 70011039h SiS5597/8 Universal Serial Bus Controller (Generic ID)
 Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
 Address 0 is a Memory Address (0-4GiB) : CFFFE000h..CFFFEFFFh
 System IRQ 10, INT# D

 Bus 0 (PCI), Device Number 2, Device Function 3
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 7001h SiS5597/8 Universal Serial Bus Controller
 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
   System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 07h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 00h, Maximum Bus Latency 50h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB (OHCI)
 Subsystem ID 70011039h SiS5597/8 Universal Serial Bus Controller (Generic ID)
 Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
 Address 0 is a Memory Address (0-4GiB) : CFFFF000h..CFFFFFFFh
 System IRQ 5, INT# A

 Bus 0 (PCI), Device Number 2, Device Function 5
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 5513h SiS5513 EIDE Controller (A,B step)
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0000h
 Revision D0h, Header Type 80h, Bus Latency Timer 80h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 55131039h SiS5513 EIDE Controller (A,B step) (Generic ID)
 Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : FF00h..FF07h

 Bus 0 (PCI), Device Number 2, Device Function 7
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 7012h SiS7012 Audio Codec
 Command 0105h (I/O Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision A0h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 030013F6h C-Media AC'97 Audio Device
 Subsystem Vendor 13F6h C-Media Electronics Inc
 Address 0 is an I/O Port : DC00h..DCFFh
 Address 1 is an I/O Port : D800h..D83Fh
 System IRQ 10, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 3, Device Function 0
 Vendor 1039h Silicon Integrated Systems (SiS)
 Device 0900h SiS900 10/100 Ethernet Adapter
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 90h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 09001039h SiS900 10/100 Ethernet Adapter (Generic ID)
 Subsystem Vendor 1039h Silicon Integrated Systems (SiS)
 Address 0 is an I/O Port : D400h..D4FFh
 Address 1 is a Memory Address (0-4GiB) : CFFDD000h..CFFDDFFFh
 System IRQ 10, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently enabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 19, Device Function 0
 Vendor 1106h VIA Technologies Inc
 Device 3038h VT6202 USB Controller
 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 50h, Header Type 80h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 12340925h VIA USB Controller
 Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : CC00h..CC13h
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 19, Device Function 1
 Vendor 1106h VIA Technologies Inc
 Device 3038h VT6202 USB Controller
 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 50h, Header Type 80h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 12340925h VIA USB Controller
 Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : D000h..D013h
 System IRQ 11, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 19, Device Function 2
 Vendor 1106h VIA Technologies Inc
 Device 3104h VT6202 USB 2.0 Enhanced Host Controller
 Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 51h, Header Type 80h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 12340925h VT6202 USB 2.0 Enhanced Host Controller
 Subsystem Vendor 0925h Known Bad Subsystem ID - no Vendor ID Available
 Address 0 is a Memory Address (0-4GiB) : CFFFDF00h..CFFFDFFFh
 System IRQ 10, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 10DEh Nvidia Corp
 Device 0201h GeForce3 Ti 200 [NV20.1]
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision A3h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 05h, Maximum Bus Latency 01h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 00301545h Unknown
 Subsystem Vendor 1545h Visiontek
 Address 0 is a Memory Address (0-4GiB) : CE000000h..CEFFFFFFh
 Address 1 is a Memory Address (0-4GiB, Prefetchable) : C8000000h..CBFFFFFFh
 Address 2 is a Memory Address (0-4GiB, Prefetchable) : CDC80000h..CDCFFFFFh
 System IRQ 11, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   AGP Capability, Version 2.0 (AGP 4x and below support)
     AGP Speed(s) Supported : 1x 2x 4x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : No
     Maximum Command Queue Length : 32 bytes
     AGP Speed Selected : 4x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : No
     Current Command Queue Length : 1 byte

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:78C0h
 Table Version 1.0 - OK
 Table size 176 bytes - OK
 Table Checksum DCh - OK
 PCI Interrupt Router: SiS PCI to ISA Bridge (LPC Bridge)
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 5,10,11,14,15 are used by PCI devices
Shared IRQs: IRQ 10 is shared by 4 PCI Devices
             IRQ 11 is shared by 3 PCI Devices
