Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 640 of this file; 16-05-2007 (D-M-Y)."

PCI BIOS Version 2.10 found!
Number of PCI Busses : 6
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 29A0h P965/G965 Memory Controller Hub
 Command 0006h (Memory Access, BusMaster)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 81EA1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 1, Device Function 0
 Vendor 8086h Intel Corporation
 Device 29A1h P965/G965 PCI Express Root Port
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 277D8086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 11, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : 8000h..8FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : FA700000h..FE7FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : BFE00000h..DFDFFFFFh
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 277Dh
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 2
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16
     Slot Capabilities :
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0

 Bus 0 (PCI Express), Device Number 26, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2834h 82801H (ICH8 Family) USB UHCI #4
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : DC00h..DC13h
 System IRQ 16, INT# A

 Bus 0 (PCI Express), Device Number 26, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2835h 82801H (ICH8 Family) USB UHCI #5
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : E000h..E013h
 System IRQ 17, INT# B

 Bus 0 (PCI Express), Device Number 26, Device Function 7
 Vendor 8086h Intel Corporation
 Device 283Ah 82801H (ICH8 Family) USB2 EHCI #2
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is a Memory Address (0-4GiB) : FEBFFC00h..FEBFFC93h
 System IRQ 18, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 284Bh 82801H (ICH8 Family) HD Audio Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is a Memory Address (64-bit) : FEBF8000h..FEBFBFFFh
 System IRQ 22, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 283Fh 82801H (ICH8 Family) PCI Express Port 1
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 System IRQ 11, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : None
   Prefetchable Memory Range Passed to Secondary Bus : DFE00000h..DFEFFFFFh
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 81ECh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 3
 Vendor 8086h Intel Corporation
 Device 2845h 82801H (ICH8 Family) PCI Express Port 4
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 System IRQ 10, INT# D
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : A000h..AFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : FE900000h..FE9FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 4
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   8.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 81ECh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 4
 Vendor 8086h Intel Corporation
 Device 2847h 82801H (ICH8 Family) PCI Express Port 5
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 System IRQ 11, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : 9000h..9FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : FE800000h..FE8FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 5
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :  10.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 81ECh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2830h 82801H (ICH8 Family) USB UHCI #1
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : D480h..D493h
 System IRQ 23, INT# A

 Bus 0 (PCI Express), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2831h 82801H (ICH8 Family) USB UHCI #2
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : D800h..D813h
 System IRQ 19, INT# B

 Bus 0 (PCI Express), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2832h 82801H (ICH8 Family) USB UHCI #3
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : D880h..D893h
 System IRQ 18, INT# C

 Bus 0 (PCI Express), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 2836h 82801H (ICH8 Family) USB2 EHCI #1
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is a Memory Address (0-4GiB) : FEBFF800h..FEBFF893h
 System IRQ 23, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI Express), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 244Eh 82801HB Hub Interface to PCI Bridge (ICH8 B0 step)
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision F2h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 5, Subordinate Bus number 5
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 20h
   I/O Port Range Passed to Secondary Bus : B000h..BFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : FEA00000h..FEAFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 81ECh

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2810h 82801HB/HR (ICH8/R) LPC Interface Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2820h 82801H (ICH8 Family) 4 port SATA Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is an I/O Port : EC00h..EC07h
 Address 1 is an I/O Port : E880h
 Address 2 is an I/O Port : E800h..E807h
 Address 3 is an I/O Port : E480h
 Address 4 is an I/O Port : E400h..E407h
 Address 5 is an I/O Port : E080h..E08Fh
 System IRQ 19, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 283Eh 82801H (ICH8 Family) SMBus Controller
 Command 0001h (I/O Access)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 0400h
 System IRQ 18, INT# C

 Bus 0 (PCI Express), Device Number 31, Device Function 5
 Vendor 8086h Intel Corporation
 Device 2825h 82801H (ICH8 Family) 2 port SATA Controller         
 Command 0005h (I/O Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 81EC1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is an I/O Port : D400h
 Address 1 is an I/O Port : D080h
 Address 2 is an I/O Port : D000h
 Address 3 is an I/O Port : CC00h
 Address 4 is an I/O Port : C880h
 Address 5 is an I/O Port : C800h
 System IRQ 19, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 10DEh Nvidia Corp
 Device 0393h GeForce 7300 GT
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision A1h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Display, type VGA
 Subsystem ID 04121462h Unknown
 Subsystem Vendor 1462h Micro-Star International Co Ltd (MSI)
 Address 0 is a Memory Address (0-4GiB) : FD000000h
 Address 1 is a Memory Address (64-bit, Prefetchable) : C0000000h
 Address 3 is a Memory Address (64-bit) : FC000000h
 Address 5 is an I/O Port : 8C00h
 System IRQ 16, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Non-Fatal Error Detected
       Unsupported Request Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16

 Bus 2 (PCI Express), Device Number 0, Device Function 0
 Vendor 197Bh JMicron Technology Corp
 Device 2363h JMB36X PCIE-to-SATAII/IDE RAID Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 81E41043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is an I/O Port : 9C00h
 Address 1 is an I/O Port : 9880h
 Address 2 is an I/O Port : 9800h..9807h
 Address 3 is an I/O Port : 9480h
 Address 4 is an I/O Port : 9400h
 Address 5 is a Memory Address (0-4GiB) : FE8FE000h..FE8FFFFFh
 System IRQ 16, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   PCI Express Capability, Version 1
     Device/Port Type : 
       Legacy PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Non-Fatal
     Device Status :
       Fatal Error Detected
       Unsupported Request Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 3 (PCI Express), Device Number 0, Device Function 0
 Vendor 10ECh Realtek Semiconductor
 Device 8168h RTL8168/8111 PCI-E Gigabit Ethernet NIC
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 81AA1043h RTL8168/8111 PCI-E Gigabit Ethernet NIC
 Subsystem Vendor 1043h ASUSTeK Computer Inc
 Address 0 is an I/O Port : A800h..A8FFh
 Address 1 is not present or not configured!
 Address 2 is a Memory Address (64-bit) : FE9FF000h
 System IRQ 19, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   Vital Product Data Capability
     VPD Data not present
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Attention Button Present on Device
       Attention Indicator Present on Device
       Power Indicator Present on Device
       Unsupported Request Severity is Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
   Vendor-Dependant Capability

 Bus 5 (PCI), Device Number 1, Device Function 0
 Vendor 1412h VIA Technologies Inc (Was: IC Ensemble Inc)
 Device 1724h VT1720/4 Envy24PT PCI Multi-Channel Audio Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 36321412h VT1720/4 Envy24PT PCI Multi-Channel Audio Controller (Guess Only!)
 Subsystem Vendor 1412h VIA Technologies Inc (Was: IC Ensemble Inc)
 Address 0 is an I/O Port : BC00h
 Address 1 is an I/O Port : B880h
 System IRQ 22, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 5 (PCI), Device Number 2, Device Function 0
 Vendor 11BDh Pinnacle Systems Inc
 Device BEDEh Multimedia device
 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
 Status 3290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Target Abort, Received Master Abort, Medium Timing)
 Revision 00h, Header Type 80h, Bus Latency Timer 40h
 Minimum Bus Grant 08h, Maximum Bus Latency 10h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Multimedia, type Other
 Subsystem ID 002211BDh Pinnacle DV/AV        
 Subsystem Vendor 11BDh Pinnacle Systems Inc
 Address 0 is a Memory Address (0-4GiB) : FEAFE000h
 CIS can read from Address 0 mapped memory, offset 0228h
 System IRQ 23, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 5 (PCI), Device Number 2, Device Function 1
 Vendor 11BDh Pinnacle Systems Inc
 Device 0015h FireWire IEEE1394
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 00h, Header Type 80h, Bus Latency Timer 40h
 Minimum Bus Grant 20h, Maximum Bus Latency 50h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type OHCI FireWire
 Subsystem ID 002211BDh FireWire IEEE1394 (Guess Only!)
 Subsystem Vendor 11BDh Pinnacle Systems Inc
 Address 0 is a Memory Address (0-4GiB) : FEAFF800h
 System IRQ 23, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:6370h
 Table Version 1.0 - OK
 Table size 304 bytes - OK
 Table Checksum 87h - OK
 PCI Interrupt Router: 82801HB/HR (ICH8/R) LPC Interface Controller
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 10,11,16,17,18,19,22,23 are used by PCI devices
Shared IRQs: IRQ 11 is shared by 3 PCI Devices
             IRQ 16 is shared by 3 PCI Devices
             IRQ 18 is shared by 3 PCI Devices
             IRQ 19 is shared by 4 PCI Devices
             IRQ 22 is shared by 2 PCI Devices
             IRQ 23 is shared by 4 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...
