#
# qmake configuration for solaris-g++64
#
# The X11 header files used to be broken on Solaris until patches were
# released in early 2001 for Solaris 2.6, 7, and 8. On Solaris 2.5.1
# or non-patched systems -fpermissive works around the incompatibility
# between GCC 2.95 or better and Solaris - but we still get warnings
# because we don't use -isystem.
#
# From the standards(5) manual page:
# 	The XNS4 specification is safe for use only in ILP32 (32-bit)
# 	environments and should not be used for LP64 (64-bit)
# 	application environments. Use XNS5, which has LP64-clean
# 	interfaces that are portable across ILP32 and LP64 environments.
# 	[...]
# 	For platforms supporting the LP64 (64-bit) programming environment
# 	where the SC5.0 Compilers have been installed, SUSv2-conforming LP64
# 	applications using XNS5 library calls should be built with command
# 	lines of the form:
# 		c89 $(getconf XBS5_LP64_OFF64_CFLAGS) -D_XOPEN_SOURCE=500 \
# 		    $(getconf XBS5_LP64_OFF64_LDFLAGS) foo.c -o foo \
# 		    $(getconf XBS5_LP64_OFF64_LIBS) -lxnet
# So it appears that _XOPEN_SOURCE=500 should be defined when building
# 64-bit applications (on Solaris 7 and better). But then __EXTENSIONS__
# should be defined as well to recover all the default system interface.
#

MAKEFILE_GENERATOR	= UNIX
TEMPLATE		= app
CONFIG			+= qt warn_on release link_prl
QT			+= core gui

QMAKE_CC		= gcc
QMAKE_LEX		= flex
QMAKE_LEXFLAGS		=
QMAKE_YACC		= yacc
QMAKE_YACCFLAGS		= -d
QMAKE_CFLAGS		= -m64 -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
QMAKE_CFLAGS_DEPS	= -M
QMAKE_CFLAGS_WARN_ON	= -Wall -W
QMAKE_CFLAGS_WARN_OFF	= -w
QMAKE_CFLAGS_RELEASE	= -O2
QMAKE_CFLAGS_DEBUG	= -g
QMAKE_CFLAGS_SHLIB	= -fPIC
QMAKE_CFLAGS_STATIC_LIB	= $$QMAKE_CFLAGS_SHLIB
QMAKE_CFLAGS_YACC	= -Wno-unused -Wno-parentheses
QMAKE_CFLAGS_THREAD	= -D_REENTRANT

QMAKE_CXX		= g++
QMAKE_CXXFLAGS		= $$QMAKE_CFLAGS
QMAKE_CXXFLAGS_DEPS	= $$QMAKE_CFLAGS_DEPS
QMAKE_CXXFLAGS_WARN_ON	= $$QMAKE_CFLAGS_WARN_ON
QMAKE_CXXFLAGS_WARN_OFF	= $$QMAKE_CFLAGS_WARN_OFF
QMAKE_CXXFLAGS_RELEASE	= $$QMAKE_CFLAGS_RELEASE
QMAKE_CXXFLAGS_DEBUG	= $$QMAKE_CFLAGS_DEBUG
QMAKE_CXXFLAGS_SHLIB	= $$QMAKE_CFLAGS_SHLIB
QMAKE_CXXFLAGS_STATIC_LIB = $$QMAKE_CFLAGS_STATIC_LIB
QMAKE_CXXFLAGS_YACC	= $$QMAKE_CFLAGS_YACC
QMAKE_CXXFLAGS_THREAD	= $$QMAKE_CFLAGS_THREAD

QMAKE_INCDIR		= /usr/sfw/include
QMAKE_LIBDIR		= /usr/sfw/lib/64
QMAKE_INCDIR_X11	= /usr/openwin/include
QMAKE_LIBDIR_X11	= /usr/openwin/lib/64
QMAKE_INCDIR_QT		= $$[QT_INSTALL_HEADERS]
QMAKE_LIBDIR_QT		= $$[QT_INSTALL_LIBS]
QMAKE_INCDIR_OPENGL	= /usr/openwin/include
QMAKE_LIBDIR_OPENGL	= /usr/openwin/lib/64

QMAKE_LINK		= g++
QMAKE_LINK_SHLIB	= g++
QMAKE_LINK_C		= gcc
QMAKE_LINK_C_SHLIB	= gcc
QMAKE_LFLAGS		= -m64
QMAKE_LFLAGS_RELEASE	=
QMAKE_LFLAGS_DEBUG	= -g
QMAKE_LFLAGS_SHLIB	= -shared
QMAKE_LFLAGS_PLUGIN	= $$QMAKE_LFLAGS_SHLIB
QMAKE_LFLAGS_SONAME	= -h$$LITERAL_WHITESPACE
QMAKE_LFLAGS_THREAD	=
QMAKE_LFLAGS_NOUNDEF	= -z defs
QMAKE_RPATH		= -Wl,-R,

QMAKE_LIBS		=
QMAKE_LIBS_DYNLOAD	= -ldl
QMAKE_LIBS_X11		= -lXext -lX11 -lresolv -lsocket -lnsl
QMAKE_LIBS_X11SM	= -lSM -lICE
QMAKE_LIBS_NIS		=
QMAKE_LIBS_OPENGL	= -lGLU -lGL
QMAKE_LIBS_OPENGL_QT	= -lGL
QMAKE_LIBS_THREAD	= -lpthread -lrt
QMAKE_LIBS_NETWORK      = -lresolv -lsocket -lxnet -lnsl

QMAKE_MOC		= $$[QT_INSTALL_BINS]/moc
QMAKE_UIC		= $$[QT_INSTALL_BINS]/uic

QMAKE_AR		= ar cq
QMAKE_OBJCOPY           = objcopy
QMAKE_RANLIB		=

QMAKE_TAR		= tar -cf
QMAKE_GZIP		= gzip -9f

QMAKE_COPY		= cp -f
QMAKE_MOVE		= mv -f
QMAKE_DEL_FILE		= rm -f
QMAKE_DEL_DIR		= rmdir
QMAKE_CHK_DIR_EXISTS	= test -d
QMAKE_MKDIR		= mkdir -p
include(../common/unix.conf)
load(qt_config)