id	summary	reporter	owner	description	type	status	priority	component	version	resolution	keywords	cc
8	R8110 B0.1.3 loads but no network	David McKenna		"  I am running eCS 2.0 on Intel H55 chipset i3 CPU system with 4GB RAM. The NIC is:

Bus 1 (PCI Express), Device Number 0, Device Function 0
 Vendor 10ECh Realtek Semiconductor Co., Ltd.
 Device 8168h RTL8111/8168B PCI Express Gigabit Ethernet controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 76361462h Onboard RTL8111b on MSI P965 Platinum Mainboard (Guess Only!)
 Subsystem Vendor 1462h Micro-Star International Co., Ltd.
 Address 0 is an I/O Port : D800h
 Address 1 is not present or not configured!
 Address 2 is a Memory Address (64-bit, Prefetchable) : FAFFF000h
 Address 4 is a Memory Address (64-bit, Prefetchable) : FAFF8000h
 System IRQ 11, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
   MSI-X Capability
   Vital Product Data Capability
     VPD Data not present

 With the latest beta (0.1.3) I cannot connect to the network. LANTRAN.LOG says:

IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
PRO0021: A general failure occurred when the program tried to bind TCPIP_NIF to R8110_NIF.
TCPBEUI: Logical adapter 0 is trying to bind to TCP/IP interface lan0.
LT00141: Errors occurred while attempting to initialize TCPBEUI.

 I am able to connect using the beta dated 2-14-2011 if I set the NETADDRESS manually (I am typing this using that). I tried using the NIF from that beta with the new OS2 file, but it does not work either."	defect	closed	major	r8110		wontfix