Changes between Version 73 and Version 74 of CupsPort

Timestamp:

Mar 5, 2016, 11:21:19 AM (9 years ago)

Author:

Alex Taylor

Comment:

Updated ZIP file links

CupsPort

@@ -39 +39 @@
 The alternative is to download all required packages in ZIP file format and perform a manual installation. Check the installation notes and any included readme files plus the HowTo mentioned below to help install the packages and setup a printer:
 
-'''Note:''' Many of the versions linked here are out of date. The WarpIN packages should be used until these links can be updated.
+[http://www.cups.org CUPS] - This is the base CUPS package.  Version 2.1.0 is available at [http://smedley.id.au/tmp/cups-2.1.0-os2-20151122.zip]; this also requires the CUPS-Filters package, [http://smedley.id.au/tmp/cups-filters-1.0.71-os2-20150725.zip].  (An older stable version, V1.4.8, is also available: [https://dl.dropbox.com/u/76425158/cups-1.4.8-os2-20121221.zip] - this does not require CUPS-Filters.) 
 
-[http://www.cups.org CUPS] - This is the base CUPS package.  V1.4.8 is available via [https://dl.dropbox.com/u/76425158/cups-1.4.8-os2-20121221.zip]. Note that for USB printing this release requires you to have LIBUSB10.DLL on your system; you can get this file from [https://dl.dropboxusercontent.com/u/76425158/libusb-1.0.16-rc6-20130525.zip].
+Note that for USB printing with either of these versions, you must have LIBUSB10.DLL on your system; you can get this file from [https://dl.dropboxusercontent.com/u/76425158/libusb-1.0.16-rc6-20130525.zip].
 
 [http://pages.cs.wisc.edu/~ghost Ghostscript] - The latest OS/2 binary should always be available from [http://www.smedley.info/os2ports/index.php?page=ghostscript].  
@@ -47 +47 @@
 Depending on your printer, you most likely need one of the following:
 
-  * [http://gutenprint.sourceforge.net Gutenprint] - V5.2.9: https://dl.dropboxusercontent.com/u/76425158/gutenprint-5.2.9-os2-2012-10-28.zip.  The list of supported printers is at http://gutenprint.sourceforge.net/p_Supported_Printers.php
+  * [http://gutenprint.sourceforge.net Gutenprint] - V5.2.10: [https://dl.dropboxusercontent.com/u/76425158/gutenprint-5.2.10-os2-20141019.zip]. The list of supported printers is at http://gutenprint.sourceforge.net/p_Supported_Printers.php
 
-  * [http://hplipopensource.com HP-LIP] - OS/2 binary of V3.12.10a: https://dl.dropboxusercontent.com/u/76425158/hplip-3.12.10a-os2-2012-10-28.zip 
+  * [http://hplipopensource.com HP-LIP] - OS/2 binary of V3.15.11: [http://smedley.id.au/tmp/hplip-3.15.11-os2-20151121.zip]. 
 
   * [http://splix.ap2c.org Splix] - OS/2 port of v2.0.0 from http://download.smedley.info/splix-2.0.0-os2-20100404.zip (older [http://download.smedley.info/splix-1.1.1-os2-20081226.zip v1.1.1] also available) (needs [http://smedley.info/gcc432.zip GCC432.DLL]). List of supported printers at http://splix.ap2c.org/ (all Samsung or Xerox printers)
@@ -67 +67 @@
 CUPS and !Gutenprint/Splix/HPLIP need to be extracted into the root directory of the SAME drive - some !Gutenprint/Splix/HPLIP files need to be installed into the CUPS directories.
 
-Ghostscript also needs to be installed.  The current CUPS build expects to find gsos2.exe in \gs\gs8.71\bin\gsos2.exe - ie on the same drive as CUPS.  If this isn't the location of Ghostscript, you can edit \cups\lib\cups\filter\pstoraster and edit the PREFIX which points to the Ghostscript location.
+Ghostscript also needs to be installed.  The current CUPS build expects to find gsos2.exe in \gs\gsx.yy\bin\gsos2.exe - ie on the same drive as CUPS.  If this isn't the location of Ghostscript, you can edit \cups\lib\cups\filter\pstoraster and edit the PREFIX which points to the Ghostscript location.
 
 Refer to the CUPS [wiki:HowTo] for more details on how to use CUPS, particularly the stuff on setting up the port driver and importing PPD files into pscript.drv