BldLevel: @#D Azarewicz:1.31#@##1## 5 Sep 2013 08:31:44      DAZAR1    ::::::Test Build@@AHCI Driver (c) 2013 D Azarewicz
CmdLine: OS2AHCI.ADD /d:2
[2031] WARNING: This test version of OS2AHCI will stop working in 29 days
[2031] scanning PCI bus...
[2953] Adapter 0 PCI=0:31:2 ID=8086:3b2f
[2953] BAR #0: type = I/O, addr = 0x00001818, size = 8
[2953] BAR #1: type = I/O, addr = 0x0000180c, size = 4
[2953] BAR #2: type = I/O, addr = 0x00001810, size = 8
[2953] BAR #3: type = I/O, addr = 0x00001808, size = 4
[2953] BAR #4: type = I/O, addr = 0x00001840, size = 32
[2955] BAR #5: type = MEM, addr = 0xf2427000, size = 2048
[5054] Registered kernel exit routine for INT13 mode
[5076] IORB 0668:8f42 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0)
[5076] ahci_save_bios_config: BIOS AHCI mode is 0
[5076] AHCI global registers for adapter 0 0:31:2 irq=16 addr=0xf2427000
 00: ff20ff65 - 64bit ncq sntf mps sss alpm led clo pio_multi ssc part ems sxs cmd_slots:32 ports:6
 04: 80000000 - ahci_enabled
 08: 00000000
 0c: 00000033
 10: 00010300
 14: 00000000
 18: 00000000
 1c: 01600002
 20: 07010000
 24: 00000004 - apst
[5076] ahci_scan_ports: scanning ports on adapter 0
[5076] ahci_scan_ports: Wait till not busy on port 0
[5076] ahci_reset_port: resetting port 0.0
[5076] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x621
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x50000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400000
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5076] ahci_stop_port 0.0
[5076] ahci_reset_port: setting link speed and power management options
[5076] ahci_reset_port: issuing COMRESET on port 0
[5078] Wait for communication...
[5093] ahci_reset_port: starting port 0 again
[5093] ahci_start_port 0.0
[5093] ahci_start_port: PORT_SCR_STAT = 0x123
[5093] ahci_start_port: PORT_SCR_ERR  = 0x0
[5125] ahci_reset_port: PORT_TFDATA = 0x150
[5125] ahci_scan_ports: port 0 seems to be attached to a device; probing...
[5125] ATA command for 0.0.0, slot 0:
[5125] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00   ................
[5125] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 ec 00               ............
[5125] sg_list:   0628:0580  2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   *...............
[5125] executing polled cmd...[5156] success
[5156] ATA_IDENTIFY results:
0610:2f2a  5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00   Z..?7.......?...
0610:2f3a  00 00 00 00 30 31 38 30-35 31 43 50 43 4b 34 30   ....018051CPCK40
0610:2f4a  50 42 32 47 57 48 4a 33-03 00 5f 76 04 00 43 50   PB2GWHJ3.._v..CP
0610:2f5a  5a 33 37 43 46 30 49 48-41 54 48 43 20 49 54 48   Z37CF0IHATHC ITH
0610:2f6a  37 53 35 32 33 30 41 32-41 39 36 33 20 34 20 20   7S5230A2A963 4  
0610:2f7a  20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80                 ..
0610:2f8a  00 40 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00   .@...@.......?..
0610:2f9a  3f 00 10 fc fb 00 10 01-ff ff ff 0f 00 00 07 00   ?...............
0610:2faa  03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00   ..x.x.x.x.......
0610:2fba  00 00 00 00 00 00 1f 00-06 1f 04 00 4c 00 40 00   ............L.@.
0610:2fca  fc 01 28 00 6b 34 09 7d-23 61 69 34 09 bc 23 61   ..(.k4.}#ai4..#a
0610:2fda  3f 20 2c 00 2c 00 80 40-fe ff 00 00 00 00 00 00   ? ,.,..@........
0610:2fea  00 00 00 00 00 00 00 00-b0 ea 42 25 00 00 00 00   ..........B%....
0610:2ffa  00 00 00 00 00 40 b8 7a-00 50 a6 cc c1 45 55 24   .....@.z.P...EU$
0610:300a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 1c 40   ...............@
0610:301a  1c 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00   .@..............
0610:302a  29 00 0b 00 00 00 00 00-00 00 00 00 00 00 00 00   )...............
0610:303a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:304a  00 00 00 00 00 00 00 00-05 40 00 40 00 80 00 00   .........@.@....
0610:305a  5a 33 00 00 00 00 b1 b1-b1 47 00 00 00 00 00 00   Z3.......G......
0610:306a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:307a  03 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:308a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:309a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30aa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ba  00 00 00 00 00 00 00 00-00 00 00 00 3d 00 00 00   ............=...
0610:30ca  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30da  00 00 20 1c 00 00 00 00-00 00 00 00 1f 10 21 00   .. ...........!.
0610:30ea  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30fa  00 00 00 00 01 00 c7 02-00 00 00 00 00 00 00 00   ................
0610:310a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:311a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 13   ................
[5156] found device 0.0.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1
[5156] ahci_stop_port 0.0
[5156] ahci_scan_ports: Wait till not busy on port 1
[5156] ahci_reset_port: resetting port 0.1
[5156] AHCI port 1 registers:
 PORT_CMD       = 0xc0006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5156] ahci_stop_port 0.1
[5156] ahci_reset_port: setting link speed and power management options
[5156] ahci_reset_port: issuing COMRESET on port 1
[5158] Wait for communication...
[5187] ahci_reset_port: starting port 1 again
[5187] ahci_start_port 0.1
[5187] ahci_start_port: PORT_SCR_STAT = 0x113
[5187] ahci_start_port: PORT_SCR_ERR  = 0x0
[5187] ahci_reset_port: PORT_TFDATA = 0x100
[5187] ahci_scan_ports: port 1 seems to be attached to a device; probing...
[5187] ATA command for 0.1.0, slot 0:
[5187] cmd_hdr:   0628:7800  05 00 01 00 00 00 00 00-00 3d ef 00 00 00 00 00   .........=......
[5187] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 a1 00               ............
[5187] sg_list:   0628:7d80  2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   *...............
[5187] executing polled cmd...[5218] success
[5218] ATA_IDENTIFY_PACKET results:
0610:2f2a  c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f3a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f4a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 2e 31   ...............1
0610:2f5a  41 46 20 20 20 20 70 4f-69 74 72 61 20 63 56 44   AF    pOitra cVD
0610:2f6a  20 44 57 52 41 20 2d 44-37 37 30 30 20 48 20 20    DWRA -D7700 H  
0610:2f7a  20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00                 ..
0610:2f8a  00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00   .....@..........
0610:2f9a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00   ................
0610:2faa  03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00   ..x.x.x.x.......
0610:2fba  00 00 00 00 00 00 00 00-02 06 00 00 68 00 40 00   ............h.@.
0610:2fca  f8 01 00 00 18 42 00 40-00 40 18 42 00 00 00 40   .....B.@.@.B...@
0610:2fda  3f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ? ..............
0610:2fea  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ffa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:300a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:301a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:302a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:303a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:304a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:305a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:306a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:307a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:308a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:309a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30aa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ba  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ca  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30da  00 00 00 00 00 00 00 00-00 00 00 00 1f 10 00 00   ................
0610:30ea  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30fa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:310a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:311a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 21   ...............!
[5218] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1
[5218] ahci_stop_port 0.1
[5218] ahci_scan_ports: Wait till not busy on port 4
[5218] ahci_reset_port: resetting port 0.4
[5218] AHCI port 4 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x0
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x7f
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5218] ahci_stop_port 0.4
[5218] ahci_reset_port: setting link speed and power management options
[5218] ahci_reset_port: issuing COMRESET on port 4
[5220] Wait for communication...
[5750] no device present after resetting port #4 (PORT_SCR_STAT = 0x0)
[5750] ahci_stop_port 0.4
[5750] ahci_scan_ports: Wait till not busy on port 5
[5750] ahci_reset_port: resetting port 0.5
[5750] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x150
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5750] ahci_stop_port 0.5
[5750] ahci_reset_port: setting link speed and power management options
[5750] ahci_reset_port: issuing COMRESET on port 5
[5751] Wait for communication...
[5781] ahci_reset_port: starting port 5 again
[5781] ahci_start_port 0.5
[5781] ahci_start_port: PORT_SCR_STAT = 0x113
[5781] ahci_start_port: PORT_SCR_ERR  = 0x0
[5843] ahci_reset_port: PORT_TFDATA = 0x150
[5843] ahci_scan_ports: port 5 seems to be attached to a device; probing...
[5843] ATA command for 0.5.0, slot 0:
[5843] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[5843] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 ec 00               ............
[5843] sg_list:   0638:7d80  2a 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   *...............
[5843] executing polled cmd...[5875] success
[5875] ATA_IDENTIFY results:
0610:2f2a  5a 04 ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00   Z..?7.......?...
0610:2f3a  00 00 00 00 20 20 20 20-20 20 50 4d 5a 32 41 58   ....      PMZ2AX
0610:2f4a  4c 58 33 48 53 50 53 50-03 00 e4 3a 04 00 42 4d   LX3HSPSP...:..BM
0610:2f5a  49 5a 36 43 52 30 54 48-35 53 31 34 31 30 47 30   IZ6CR0TH5S1410G0
0610:2f6a  53 39 30 41 20 30 20 20-20 20 20 20 20 20 20 20   S90A 0          
0610:2f7a  20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80                 ..
0610:2f8a  00 00 00 0f 00 40 00 02-00 02 07 00 ff 3f 10 00   .....@.......?..
0610:2f9a  3f 00 10 fc fb 00 00 01-30 22 a5 0b 00 00 07 04   ?.......0"......
0610:2faa  03 00 78 00 78 00 f0 00-78 00 00 00 00 00 00 00   ..x.x...x.......
0610:2fba  00 00 00 00 00 00 00 00-02 02 00 00 48 00 40 00   ............H.@.
0610:2fca  fc 00 1a 00 6b 74 09 7f-63 60 69 f4 09 3c 63 60   ....kt.c`i..<c`
0610:2fda  3f 00 20 00 00 00 80 40-fe ff 00 00 fe 80 00 00   ?. ....@........
0610:2fea  00 00 00 00 00 00 00 00-30 22 a5 0b 00 00 00 00   ........0"......
0610:2ffa  00 00 00 00 00 00 0d 88-00 00 00 00 00 00 00 00   ................
0610:300a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:301a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:302a  01 00 0b 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:303a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:304a  00 00 00 00 00 00 00 00-01 40 00 00 00 80 00 00   .........@......
0610:305a  49 5a 00 00 00 00 32 30-25 50 00 00 00 00 00 00   IZ....20%P......
0610:306a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:307a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:308a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:309a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30aa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ba  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ca  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30da  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30ea  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:30fa  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:310a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:311a  00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 fa   ................
[5875] found device 0.5.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1
[5875] ahci_stop_port 0.5
[5875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[5875] IORB 0668:8f42 removed (queue = 0610:5a4a)
[5875] IORB 0668:8f42 complete (status = 0x0001, error = 0x0000)
[6048] IORB 06b8:03d0 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0)
[6048] IORB 06b8:03d0 removed (queue = 0610:5a4a)
[6048] IORB 06b8:03d0 complete (status = 0x0001, error = 0x0000)
[6048] IORB 06b8:03d0 queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0)
[6048] IORB 06b8:03d0 removed (queue = 0610:5a4a)
[6048] IORB 06b8:03d0 complete (status = 0x0001, error = 0x0000)
[6048] IORB 06c8:c56c queued (cmd = 1/1, queue = 0610:5a4a [driver], timeout = 0)
[6048] IORB 06c8:c56c removed (queue = 0610:5a4a)
[6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[6048] IORB 06c8:c56c queued (cmd = 2/1, queue = 0610:5b68 [port], timeout = 0)
[6048] IORB 06c8:c56c removed (queue = 0610:5b68)
[6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[6048] IORB 06c8:c56c queued (cmd = 2/1, queue = 0610:5e92 [port], timeout = 0)
[6048] IORB 06c8:c56c removed (queue = 0610:5e92)
[6048] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[6048] IORB 06c8:c56c queued (cmd = 3/3, queue = 0610:5b68 [port], timeout = 0)
[6048] ahci_get_geometry(0.0.0)
[6048] ahci_reset_port: resetting port 0.0
[6048] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400000
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6048] ahci_stop_port 0.0
[6048] ahci_reset_port: setting link speed and power management options
[6048] ahci_reset_port: issuing COMRESET on port 0
[6050] Wait for communication...
[6062] ahci_reset_port: starting port 0 again
[6062] ahci_start_port 0.0
[6062] ahci_start_port: PORT_SCR_STAT = 0x123
[6062] ahci_start_port: PORT_SCR_ERR  = 0x0
[6093] ahci_reset_port: PORT_TFDATA = 0x150
[6093] ATA command for 0.0.0, slot 0:
[6093] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00   ................
[6093] ata_cmd:   1530:4ccc  00 00 00 00 00 00 00 00-00 00 ec 00               ............
[6093] sg_list:   0628:0580  aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[6093] executing polled cmd on slot 0...[6125]  polled cmd error for IORB 06c8:c56c[6125] ahci_reset_port: resetting port 0.0
[6125] AHCI port 0 registers:
 PORT_CMD       = 0x400e017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400002
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6125] ahci_stop_port 0.0
[6125] ahci_reset_port: setting link speed and power management options
[6125] ahci_reset_port: issuing COMRESET on port 0
[6126] Wait for communication...
[6156] ahci_reset_port: starting port 0 again
[6156] ahci_start_port 0.0
[6156] ahci_start_port: PORT_SCR_STAT = 0x123
[6156] ahci_start_port: PORT_SCR_ERR  = 0x0
[6187] ahci_reset_port: PORT_TFDATA = 0x150
[6187] 
[6187] ahci_stop_port 0.0
[6187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[6187] IORB 06c8:c56c removed (queue = 0610:5b68)
[6187] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608)
[6187] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0)
[6187] ahci_read(0.0.0, 0, 1)
[6187] ahci_reset_port: resetting port 0.0
[6187] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x123
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x150
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6187] ahci_stop_port 0.0
[6187] ahci_reset_port: setting link speed and power management options
[6187] ahci_reset_port: issuing COMRESET on port 0
[6189] Wait for communication...
[6218] ahci_reset_port: starting port 0 again
[6218] ahci_start_port 0.0
[6218] ahci_start_port: PORT_SCR_STAT = 0x123
[6218] ahci_start_port: PORT_SCR_ERR  = 0x0
[6250] ahci_reset_port: PORT_TFDATA = 0x150
[6250] ATA command for 0.0.0, slot 0:
[6250] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00   ................
[6250] ata_cmd:   1530:4a28  00 00 01 00 00 00 00 00-00 00 c8 40               ...........@
[6250] sg_list:   0628:0580  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[6250] executing polled cmd on slot 0...[6562]  polled cmd error for IORB 06c8:c56c[6562] ahci_reset_port: resetting port 0.0
[6562] AHCI port 0 registers:
 PORT_CMD       = 0x400e017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400001
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6562] ahci_stop_port 0.0
[6562] ahci_reset_port: setting link speed and power management options
[6562] ahci_reset_port: issuing COMRESET on port 0
[6564] Wait for communication...
[6593] ahci_reset_port: starting port 0 again
[6593] ahci_start_port 0.0
[6593] ahci_start_port: PORT_SCR_STAT = 0x123
[6593] ahci_start_port: PORT_SCR_ERR  = 0x0
[6625] ahci_reset_port: PORT_TFDATA = 0x150
[6625] 
[6625] ahci_stop_port 0.0
[6625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[6625] IORB 06c8:c56c removed (queue = 0610:5b68)
[6625] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608)
[6625] IORB 06c8:c56c queued (cmd = 3/3, queue = 0610:5e92 [port], timeout = 0)
[6625] ahci_get_geometry(0.5.0)
[6625] ahci_reset_port: resetting port 0.5
[6625] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6625] ahci_stop_port 0.5
[6625] ahci_reset_port: setting link speed and power management options
[6625] ahci_reset_port: issuing COMRESET on port 5
[6626] Wait for communication...
[6656] ahci_reset_port: starting port 5 again
[6656] ahci_start_port 0.5
[6656] ahci_start_port: PORT_SCR_STAT = 0x113
[6656] ahci_start_port: PORT_SCR_ERR  = 0x0
[6718] ahci_reset_port: PORT_TFDATA = 0x150
[6718] ATA command for 0.5.0, slot 0:
[6718] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[6718] ata_cmd:   1530:4ccc  00 00 00 00 00 00 00 00-00 00 ec 00               ............
[6718] sg_list:   0638:7d80  aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[6718] executing polled cmd on slot 0...[6750] Physical geometry: 16383 cylinders, 16 heads, 63 sectors per track (95396MB) (BIOS)
[6750] Logical geometry: 12161 cylinders, 255 heads, 63 sectors per track (95393MB) (BIOS)
[6750] is_lvm_geometry (0.5.0)
[6750] ATA command for 0.5.0, slot 0:
[6750] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[6750] ata_cmd:   1530:4c86  00 00 01 00 3e 00 00 00-00 00 c8 40               ....>......@
[6750] sg_list:   0638:7d80  aa 1f f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[6750] executing polled cmd...[7125] success
[7125] DLA sector 62:
0610:2faa  02 52 4d 42 50 4d 46 44-21 5f 54 ce 01 ed 5e df   .RMBPMFD!_T...^.
0610:2fba  01 ed 5e df 00 00 00 00-79 32 00 00 f0 00 00 00   ..^.....y2......
0610:2fca  3f 00 00 00 44 69 73 6b-31 20 2d 20 39 35 33 39   ?...Disk1 - 9539
0610:2fda  33 2e 33 20 4d 69 42 00-00 00 00 00               3.3 MiB.....
[7125] is_lvm_geometry found at sector 62
[7125] Reported geometry: 12921 cylinders, 240 heads, 63 sectors per track (95393MB) (LVM)
[7125] 
[7125] ahci_stop_port 0.5
[7125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[7125] IORB 06c8:c56c removed (queue = 0610:5e92)
[7125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[7125] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[7125] ahci_read(0.5.0, 0, 1)
[7125] ahci_reset_port: resetting port 0.5
[7125] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[7125] ahci_stop_port 0.5
[7125] ahci_reset_port: setting link speed and power management options
[7125] ahci_reset_port: issuing COMRESET on port 5
[7126] Wait for communication...
[7156] ahci_reset_port: starting port 5 again
[7156] ahci_start_port 0.5
[7156] ahci_start_port: PORT_SCR_STAT = 0x113
[7156] ahci_start_port: PORT_SCR_ERR  = 0x0
[7718] ahci_reset_port: PORT_TFDATA = 0x150
[7718] ATA command for 0.5.0, slot 0:
[7718] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[7718] ata_cmd:   1530:4a28  00 00 01 00 00 00 00 00-00 00 c8 40               ...........@
[7718] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[7718] executing polled cmd on slot 0...[8093] ata_read_pp(): blocks transferred = 1
[8093] 
[8093] ahci_stop_port 0.5
[8093] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[8093] IORB 06c8:c56c removed (queue = 0610:5e92)
[8093] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[8093] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[8093] ahci_read(0.5.0, 62, 1)
[8093] ahci_reset_port: resetting port 0.5
[8093] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x52
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[8093] ahci_stop_port 0.5
[8093] ahci_reset_port: setting link speed and power management options
[8093] ahci_reset_port: issuing COMRESET on port 5
[8095] Wait for communication...
[8125] ahci_reset_port: starting port 5 again
[8125] ahci_start_port 0.5
[8125] ahci_start_port: PORT_SCR_STAT = 0x113
[8125] ahci_start_port: PORT_SCR_ERR  = 0x0
[8656] ahci_reset_port: PORT_TFDATA = 0x150
[8656] ATA command for 0.5.0, slot 0:
[8656] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[8656] ata_cmd:   1530:47f2  00 00 01 00 3e 00 00 00-00 00 c8 40               ....>......@
[8656] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[8656] executing polled cmd on slot 0...[9031] ata_read_pp(): blocks transferred = 1
[9031] 
[9031] ahci_stop_port 0.5
[9031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[9031] IORB 06c8:c56c removed (queue = 0610:5e92)
[9031] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[9031] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0)
[9031] ahci_read(0.0.0, 31, 1)
[9031] ahci_reset_port: resetting port 0.0
[9031] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x123
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x150
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[9031] ahci_stop_port 0.0
[9031] ahci_reset_port: setting link speed and power management options
[9031] ahci_reset_port: issuing COMRESET on port 0
[9033] Wait for communication...
[9062] ahci_reset_port: starting port 0 again
[9062] ahci_start_port 0.0
[9062] ahci_start_port: PORT_SCR_STAT = 0x123
[9062] ahci_start_port: PORT_SCR_ERR  = 0x0
[9093] ahci_reset_port: PORT_TFDATA = 0x150
[9093] ATA command for 0.0.0, slot 0:
[9093] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00   ................
[9093] ata_cmd:   1530:4c26  00 00 01 00 1f 00 00 00-00 00 c8 40               ...........@
[9093] sg_list:   0628:0580  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[9093] executing polled cmd on slot 0...[9406]  polled cmd error for IORB 06c8:c56c[9406] ahci_reset_port: resetting port 0.0
[9406] AHCI port 0 registers:
 PORT_CMD       = 0x400e017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400001
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[9406] ahci_stop_port 0.0
[9406] ahci_reset_port: setting link speed and power management options
[9406] ahci_reset_port: issuing COMRESET on port 0
[9408] Wait for communication...
[9437] ahci_reset_port: starting port 0 again
[9437] ahci_start_port 0.0
[9437] ahci_start_port: PORT_SCR_STAT = 0x123
[9437] ahci_start_port: PORT_SCR_ERR  = 0x0
[9468] ahci_reset_port: PORT_TFDATA = 0x150
[9468] 
[9468] ahci_stop_port 0.0
[9468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[9468] IORB 06c8:c56c removed (queue = 0610:5b68)
[9468] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608)
[9468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5b68 [port], timeout = 0)
[9468] ahci_read(0.0.0, 0, 1)
[9468] ahci_reset_port: resetting port 0.0
[9468] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x123
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x150
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[9468] ahci_stop_port 0.0
[9468] ahci_reset_port: setting link speed and power management options
[9468] ahci_reset_port: issuing COMRESET on port 0
[9470] Wait for communication...
[9500] ahci_reset_port: starting port 0 again
[9500] ahci_start_port 0.0
[9500] ahci_start_port: PORT_SCR_STAT = 0x123
[9500] ahci_start_port: PORT_SCR_ERR  = 0x0
[9531] ahci_reset_port: PORT_TFDATA = 0x150
[9531] ATA command for 0.0.0, slot 0:
[9531] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 c5 ee 00 00 00 00 00   ................
[9531] ata_cmd:   1530:4c2c  00 00 01 00 00 00 00 00-00 00 c8 40               ...........@
[9531] sg_list:   0628:0580  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[9531] executing polled cmd on slot 0...[9562]  polled cmd error for IORB 06c8:c56c[9562] ahci_reset_port: resetting port 0.0
[9562] AHCI port 0 registers:
 PORT_CMD       = 0x400e017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400001
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[9562] ahci_stop_port 0.0
[9562] ahci_reset_port: setting link speed and power management options
[9562] ahci_reset_port: issuing COMRESET on port 0
[9564] Wait for communication...
[9593] ahci_reset_port: starting port 0 again
[9593] ahci_start_port 0.0
[9593] ahci_start_port: PORT_SCR_STAT = 0x123
[9593] ahci_start_port: PORT_SCR_ERR  = 0x0
[9625] ahci_reset_port: PORT_TFDATA = 0x150
[9625] 
[9625] ahci_stop_port 0.0
[9625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[9625] IORB 06c8:c56c removed (queue = 0610:5b68)
[9625] IORB 06c8:c56c complete (status = 0x0003, error = 0x0608)
[9625] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[9625] ahci_read(0.5.0, 62, 1)
[9625] ahci_reset_port: resetting port 0.5
[9625] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[9625] ahci_stop_port 0.5
[9625] ahci_reset_port: setting link speed and power management options
[9625] ahci_reset_port: issuing COMRESET on port 5
[9626] Wait for communication...
[9656] ahci_reset_port: starting port 5 again
[9656] ahci_start_port 0.5
[9656] ahci_start_port: PORT_SCR_STAT = 0x113
[9656] ahci_start_port: PORT_SCR_ERR  = 0x0
[10156] ahci_reset_port: PORT_TFDATA = 0x150
[10156] ATA command for 0.5.0, slot 0:
[10156] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[10156] ata_cmd:   1530:4c26  00 00 01 00 3e 00 00 00-00 00 c8 40               ....>......@
[10156] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[10156] executing polled cmd on slot 0...[10531] ata_read_pp(): blocks transferred = 1
[10531] 
[10531] ahci_stop_port 0.5
[10531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[10531] IORB 06c8:c56c removed (queue = 0610:5e92)
[10531] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[10531] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[10531] ahci_read(0.5.0, 0, 1)
[10531] ahci_reset_port: resetting port 0.5
[10531] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[10531] ahci_stop_port 0.5
[10531] ahci_reset_port: setting link speed and power management options
[10531] ahci_reset_port: issuing COMRESET on port 5
[10533] Wait for communication...
[10562] ahci_reset_port: starting port 5 again
[10562] ahci_start_port 0.5
[10562] ahci_start_port: PORT_SCR_STAT = 0x113
[10562] ahci_start_port: PORT_SCR_ERR  = 0x0
[11093] ahci_reset_port: PORT_TFDATA = 0x150
[11093] ATA command for 0.5.0, slot 0:
[11093] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[11093] ata_cmd:   1530:4c2c  00 00 01 00 00 00 00 00-00 00 c8 40               ...........@
[11093] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[11093] executing polled cmd on slot 0...[11468] ata_read_pp(): blocks transferred = 1
[11468] 
[11468] ahci_stop_port 0.5
[11468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[11468] IORB 06c8:c56c removed (queue = 0610:5e92)
[11468] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[11468] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[11468] ahci_read(0.5.0, 63, 1)
[11468] ahci_reset_port: resetting port 0.5
[11468] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x52
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[11468] ahci_stop_port 0.5
[11468] ahci_reset_port: setting link speed and power management options
[11468] ahci_reset_port: issuing COMRESET on port 5
[11470] Wait for communication...
[11500] ahci_reset_port: starting port 5 again
[11500] ahci_start_port 0.5
[11500] ahci_start_port: PORT_SCR_STAT = 0x113
[11500] ahci_start_port: PORT_SCR_ERR  = 0x0
[12031] ahci_reset_port: PORT_TFDATA = 0x150
[12031] ATA command for 0.5.0, slot 0:
[12031] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[12031] ata_cmd:   1530:4c24  00 00 01 00 3f 00 00 00-00 00 c8 40               ....?......@
[12031] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[12031] executing polled cmd on slot 0...[12406] ata_read_pp(): blocks transferred = 1
[12406] 
[12406] ahci_stop_port 0.5
[12406] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[12406] IORB 06c8:c56c removed (queue = 0610:5e92)
[12406] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[12406] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[12406] ahci_read(0.5.0, 20487662, 1)
[12406] ahci_reset_port: resetting port 0.5
[12406] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[12406] ahci_stop_port 0.5
[12406] ahci_reset_port: setting link speed and power management options
[12406] ahci_reset_port: issuing COMRESET on port 5
[12408] Wait for communication...
[12437] ahci_reset_port: starting port 5 again
[12437] ahci_start_port 0.5
[12437] ahci_start_port: PORT_SCR_STAT = 0x113
[12437] ahci_start_port: PORT_SCR_ERR  = 0x0
[12968] ahci_reset_port: PORT_TFDATA = 0x150
[12968] ATA command for 0.5.0, slot 0:
[12968] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[12968] ata_cmd:   1530:4c04  00 00 01 00 ee 9d 38 00-00 00 c8 41               ......8....A
[12968] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[12968] executing polled cmd on slot 0...[13343] ata_read_pp(): blocks transferred = 1
[13343] 
[13343] ahci_stop_port 0.5
[13343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[13343] IORB 06c8:c56c removed (queue = 0610:5e92)
[13343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[13343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[13343] ahci_read(0.5.0, 20487600, 1)
[13343] ahci_reset_port: resetting port 0.5
[13343] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[13343] ahci_stop_port 0.5
[13343] ahci_reset_port: setting link speed and power management options
[13343] ahci_reset_port: issuing COMRESET on port 5
[13345] Wait for communication...
[13375] ahci_reset_port: starting port 5 again
[13375] ahci_start_port 0.5
[13375] ahci_start_port: PORT_SCR_STAT = 0x113
[13375] ahci_start_port: PORT_SCR_ERR  = 0x0
[13968] ahci_reset_port: PORT_TFDATA = 0x150
[13968] ATA command for 0.5.0, slot 0:
[13968] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[13968] ata_cmd:   1530:4c0a  00 00 01 00 b0 9d 38 00-00 00 c8 41               ......8....A
[13968] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[13968] executing polled cmd on slot 0...[14343] ata_read_pp(): blocks transferred = 1
[14343] 
[14343] ahci_stop_port 0.5
[14343] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[14343] IORB 06c8:c56c removed (queue = 0610:5e92)
[14343] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[14343] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[14343] ahci_read(0.5.0, 20487663, 1)
[14343] ahci_reset_port: resetting port 0.5
[14343] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[14343] ahci_stop_port 0.5
[14343] ahci_reset_port: setting link speed and power management options
[14343] ahci_reset_port: issuing COMRESET on port 5
[14345] Wait for communication...
[14375] ahci_reset_port: starting port 5 again
[14375] ahci_start_port 0.5
[14375] ahci_start_port: PORT_SCR_STAT = 0x113
[14375] ahci_start_port: PORT_SCR_ERR  = 0x0
[14937] ahci_reset_port: PORT_TFDATA = 0x150
[14937] ATA command for 0.5.0, slot 0:
[14937] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[14937] ata_cmd:   1530:4c02  00 00 01 00 ef 9d 38 00-00 00 c8 41               ......8....A
[14937] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[14937] executing polled cmd on slot 0...[15312] ata_read_pp(): blocks transferred = 1
[15312] 
[15312] ahci_stop_port 0.5
[15312] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[15312] IORB 06c8:c56c removed (queue = 0610:5e92)
[15312] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[15312] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[15312] ahci_read(0.5.0, 61447742, 1)
[15312] ahci_reset_port: resetting port 0.5
[15312] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[15312] ahci_stop_port 0.5
[15312] ahci_reset_port: setting link speed and power management options
[15312] ahci_reset_port: issuing COMRESET on port 5
[15314] Wait for communication...
[15343] ahci_reset_port: starting port 5 again
[15343] ahci_start_port 0.5
[15343] ahci_start_port: PORT_SCR_STAT = 0x113
[15343] ahci_start_port: PORT_SCR_ERR  = 0x0
[15875] ahci_reset_port: PORT_TFDATA = 0x150
[15875] ATA command for 0.5.0, slot 0:
[15875] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[15875] ata_cmd:   1530:4c04  00 00 01 00 3e 9e a9 00-00 00 c8 43               ....>......C
[15875] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[15875] executing polled cmd on slot 0...[16250] ata_read_pp(): blocks transferred = 1
[16250] 
[16250] ahci_stop_port 0.5
[16250] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[16250] IORB 06c8:c56c removed (queue = 0610:5e92)
[16250] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[16250] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[16250] ahci_read(0.5.0, 61447680, 1)
[16250] ahci_reset_port: resetting port 0.5
[16250] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[16250] ahci_stop_port 0.5
[16250] ahci_reset_port: setting link speed and power management options
[16250] ahci_reset_port: issuing COMRESET on port 5
[16251] Wait for communication...
[16281] ahci_reset_port: starting port 5 again
[16281] ahci_start_port 0.5
[16281] ahci_start_port: PORT_SCR_STAT = 0x113
[16281] ahci_start_port: PORT_SCR_ERR  = 0x0
[16812] ahci_reset_port: PORT_TFDATA = 0x150
[16812] ATA command for 0.5.0, slot 0:
[16812] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[16812] ata_cmd:   1530:4c0a  00 00 01 00 00 9e a9 00-00 00 c8 43               ...........C
[16812] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[16812] executing polled cmd on slot 0...[17187] ata_read_pp(): blocks transferred = 1
[17187] 
[17187] ahci_stop_port 0.5
[17187] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[17187] IORB 06c8:c56c removed (queue = 0610:5e92)
[17187] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[17187] IORB 06c8:c56c queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[17187] ahci_read(0.5.0, 61447743, 1)
[17187] ahci_reset_port: resetting port 0.5
[17187] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[17187] ahci_stop_port 0.5
[17187] ahci_reset_port: setting link speed and power management options
[17187] ahci_reset_port: issuing COMRESET on port 5
[17189] Wait for communication...
[17218] ahci_reset_port: starting port 5 again
[17218] ahci_start_port 0.5
[17218] ahci_start_port: PORT_SCR_STAT = 0x113
[17218] ahci_start_port: PORT_SCR_ERR  = 0x0
[17750] ahci_reset_port: PORT_TFDATA = 0x150
[17750] ATA command for 0.5.0, slot 0:
[17750] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[17750] ata_cmd:   1530:4c02  00 00 01 00 3f 9e a9 00-00 00 c8 43               ....?......C
[17750] sg_list:   0638:7d80  10 f6 92 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[17750] executing polled cmd on slot 0...[18125] ata_read_pp(): blocks transferred = 1
[18125] 
[18125] ahci_stop_port 0.5
[18125] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[18125] IORB 06c8:c56c removed (queue = 0610:5e92)
[18125] IORB 06c8:c56c complete (status = 0x0001, error = 0x0000)
[18130] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[18130] ahci_read(0.5.0, 61447679, 1)
[18130] ahci_reset_port: resetting port 0.5
[18130] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[18130] ahci_stop_port 0.5
[18130] ahci_reset_port: setting link speed and power management options
[18130] ahci_reset_port: issuing COMRESET on port 5
[18132] Wait for communication...
[18156] ahci_reset_port: starting port 5 again
[18156] ahci_start_port 0.5
[18156] ahci_start_port: PORT_SCR_STAT = 0x113
[18156] ahci_start_port: PORT_SCR_ERR  = 0x0
[18687] ahci_reset_port: PORT_TFDATA = 0x150
[18687] ATA command for 0.5.0, slot 0:
[18687] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[18687] ata_cmd:   1530:4b02  00 00 01 00 ff 9d a9 00-00 00 c8 43               ...........C
[18687] sg_list:   0638:7d80  28 42 88 bc 00 00 00 00-00 00 00 00 ff 01 00 00   (B..............
[18687] executing polled cmd on slot 0...[19062] ata_read_pp(): blocks transferred = 1
[19062] 
[19062] ahci_stop_port 0.5
[19062] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[19062] IORB 06c8:2914 removed (queue = 0610:5e92)
[19062] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[19062] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[19062] ahci_read(0.5.0, 186293519, 1)
[19062] ahci_reset_port: resetting port 0.5
[19062] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[19062] ahci_stop_port 0.5
[19062] ahci_reset_port: setting link speed and power management options
[19062] ahci_reset_port: issuing COMRESET on port 5
[19064] Wait for communication...
[19093] ahci_reset_port: starting port 5 again
[19093] ahci_start_port 0.5
[19093] ahci_start_port: PORT_SCR_STAT = 0x113
[19093] ahci_start_port: PORT_SCR_ERR  = 0x0
[19625] ahci_reset_port: PORT_TFDATA = 0x150
[19625] ATA command for 0.5.0, slot 0:
[19625] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[19625] ata_cmd:   1530:4b02  00 00 01 00 0f 9d 1a 00-00 00 c8 4b               ...........K
[19625] sg_list:   0638:7d80  c4 4d 91 bc 00 00 00 00-00 00 00 00 ff 01 00 00   .M..............
[19625] executing polled cmd on slot 0...[20000] ata_read_pp(): blocks transferred = 1
[20000] 
[20000] ahci_stop_port 0.5
[20000] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[20000] IORB 06c8:2914 removed (queue = 0610:5e92)
[20000] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[20000] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[20000] ahci_read(0.5.0, 61443452, 1)
[20000] ahci_reset_port: resetting port 0.5
[20000] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[20000] ahci_stop_port 0.5
[20001] ahci_reset_port: setting link speed and power management options
[20001] ahci_reset_port: issuing COMRESET on port 5
[20003] Wait for communication...
[20031] ahci_reset_port: starting port 5 again
[20031] ahci_start_port 0.5
[20031] ahci_start_port: PORT_SCR_STAT = 0x113
[20031] ahci_start_port: PORT_SCR_ERR  = 0x0
[20562] ahci_reset_port: PORT_TFDATA = 0x150
[20562] ATA command for 0.5.0, slot 0:
[20562] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[20562] ata_cmd:   1530:4ad2  00 00 01 00 7c 8d a9 00-00 00 c8 43               ....|......C
[20562] sg_list:   0638:7d80  d0 ad 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[20562] executing polled cmd on slot 0...[20937] ata_read_pp(): blocks transferred = 1
[20937] 
[20937] ahci_stop_port 0.5
[20937] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[20937] IORB 06c8:2914 removed (queue = 0610:5e92)
[20937] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[20937] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[20937] ahci_read(0.5.0, 61443452, 68)
[20937] ahci_reset_port: resetting port 0.5
[20937] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[20937] ahci_stop_port 0.5
[20937] ahci_reset_port: setting link speed and power management options
[20937] ahci_reset_port: issuing COMRESET on port 5
[20939] Wait for communication...
[20968] ahci_reset_port: starting port 5 again
[20968] ahci_start_port 0.5
[20968] ahci_start_port: PORT_SCR_STAT = 0x113
[20968] ahci_start_port: PORT_SCR_ERR  = 0x0
[21500] ahci_reset_port: PORT_TFDATA = 0x150
[21500] ATA command for 0.5.0, slot 0:
[21500] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[21500] ata_cmd:   1530:4ad2  00 00 44 00 7c 8d a9 00-00 00 c8 43               ..D.|......C
[21500] sg_list:   0638:7d80  24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00   $...............
[21500] executing polled cmd on slot 0...[21875] ata_read_pp(): blocks transferred = 68
[21875] 
[21875] ahci_stop_port 0.5
[21875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[21875] IORB 06c8:2914 removed (queue = 0610:5e92)
[21875] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[21875] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[21875] ahci_read(0.5.0, 61443384, 1)
[21875] ahci_reset_port: resetting port 0.5
[21875] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[21875] ahci_stop_port 0.5
[21875] ahci_reset_port: setting link speed and power management options
[21875] ahci_reset_port: issuing COMRESET on port 5
[21876] Wait for communication...
[21906] ahci_reset_port: starting port 5 again
[21906] ahci_start_port 0.5
[21906] ahci_start_port: PORT_SCR_STAT = 0x113
[21906] ahci_start_port: PORT_SCR_ERR  = 0x0
[22437] ahci_reset_port: PORT_TFDATA = 0x150
[22437] ATA command for 0.5.0, slot 0:
[22437] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[22437] ata_cmd:   1530:4ad2  00 00 01 00 38 8d a9 00-00 00 c8 43               ....8......C
[22437] sg_list:   0638:7d80  24 1e 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00   $...............
[22437] executing polled cmd on slot 0...[22812] ata_read_pp(): blocks transferred = 1
[22812] 
[22812] ahci_stop_port 0.5
[22812] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[22812] IORB 06c8:2914 removed (queue = 0610:5e92)
[22812] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[22812] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[22812] ahci_read(0.5.0, 61443384, 68)
[22812] ahci_reset_port: resetting port 0.5
[22812] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[22812] ahci_stop_port 0.5
[22812] ahci_reset_port: setting link speed and power management options
[22812] ahci_reset_port: issuing COMRESET on port 5
[22814] Wait for communication...
[22843] ahci_reset_port: starting port 5 again
[22843] ahci_start_port 0.5
[22843] ahci_start_port: PORT_SCR_STAT = 0x113
[22843] ahci_start_port: PORT_SCR_ERR  = 0x0
[23375] ahci_reset_port: PORT_TFDATA = 0x150
[23375] ATA command for 0.5.0, slot 0:
[23375] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[23375] ata_cmd:   1530:4ad2  00 00 44 00 38 8d a9 00-00 00 c8 43               ..D.8......C
[23375] sg_list:   0638:7d80  24 80 81 bc 00 00 00 00-00 00 00 00 ff 87 00 00   $...............
[23375] executing polled cmd on slot 0...[23750] ata_read_pp(): blocks transferred = 68
[23750] 
[23750] ahci_stop_port 0.5
[23750] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[23750] IORB 06c8:2914 removed (queue = 0610:5e92)
[23750] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[23750] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[23750] ahci_read(0.5.0, 186289292, 1)
[23750] ahci_reset_port: resetting port 0.5
[23750] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[23750] ahci_stop_port 0.5
[23750] ahci_reset_port: setting link speed and power management options
[23750] ahci_reset_port: issuing COMRESET on port 5
[23751] Wait for communication...
[23781] ahci_reset_port: starting port 5 again
[23781] ahci_start_port 0.5
[23781] ahci_start_port: PORT_SCR_STAT = 0x113
[23781] ahci_start_port: PORT_SCR_ERR  = 0x0
[24312] ahci_reset_port: PORT_TFDATA = 0x150
[24312] ATA command for 0.5.0, slot 0:
[24312] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[24312] ata_cmd:   1530:4ad2  00 00 01 00 8c 8c 1a 00-00 00 c8 4b               ...........K
[24312] sg_list:   0638:7d80  d4 05 82 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[24312] executing polled cmd on slot 0...[24687] ata_read_pp(): blocks transferred = 1
[24687] 
[24687] ahci_stop_port 0.5
[24687] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[24687] IORB 06c8:2914 removed (queue = 0610:5e92)
[24687] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[24687] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[24687] ahci_read(0.5.0, 186289292, 68)
[24687] ahci_reset_port: resetting port 0.5
[24687] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[24687] ahci_stop_port 0.5
[24687] ahci_reset_port: setting link speed and power management options
[24687] ahci_reset_port: issuing COMRESET on port 5
[24689] Wait for communication...
[24718] ahci_reset_port: starting port 5 again
[24718] ahci_start_port 0.5
[24718] ahci_start_port: PORT_SCR_STAT = 0x113
[24718] ahci_start_port: PORT_SCR_ERR  = 0x0
[25250] ahci_reset_port: PORT_TFDATA = 0x150
[25250] ATA command for 0.5.0, slot 0:
[25250] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[25250] ata_cmd:   1530:4ad2  00 00 44 00 8c 8c 1a 00-00 00 c8 4b               ..D........K
[25250] sg_list:   0638:7d80  24 10 82 bc 00 00 00 00-00 00 00 00 ff 87 00 00   $...............
[25250] executing polled cmd on slot 0...[25625] ata_read_pp(): blocks transferred = 68
[25625] 
[25625] ahci_stop_port 0.5
[25625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[25625] IORB 06c8:2914 removed (queue = 0610:5e92)
[25625] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[25625] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[25625] ahci_read(0.5.0, 186289224, 1)
[25625] ahci_reset_port: resetting port 0.5
[25625] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[25625] ahci_stop_port 0.5
[25625] ahci_reset_port: setting link speed and power management options
[25625] ahci_reset_port: issuing COMRESET on port 5
[25626] Wait for communication...
[25656] ahci_reset_port: starting port 5 again
[25656] ahci_start_port 0.5
[25656] ahci_start_port: PORT_SCR_STAT = 0x113
[25656] ahci_start_port: PORT_SCR_ERR  = 0x0
[26187] ahci_reset_port: PORT_TFDATA = 0x150
[26187] ATA command for 0.5.0, slot 0:
[26187] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[26187] ata_cmd:   1530:4ad2  00 00 01 00 48 8c 1a 00-00 00 c8 4b               ....H......K
[26187] sg_list:   0638:7d80  e8 1d 83 bc 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[26187] executing polled cmd on slot 0...[26562] ata_read_pp(): blocks transferred = 1
[26562] 
[26562] ahci_stop_port 0.5
[26562] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[26562] IORB 06c8:2914 removed (queue = 0610:5e92)
[26562] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[26562] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[26562] ahci_read(0.5.0, 186289224, 68)
[26562] ahci_reset_port: resetting port 0.5
[26562] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[26562] ahci_stop_port 0.5
[26562] ahci_reset_port: setting link speed and power management options
[26562] ahci_reset_port: issuing COMRESET on port 5
[26564] Wait for communication...
[26593] ahci_reset_port: starting port 5 again
[26593] ahci_start_port 0.5
[26593] ahci_start_port: PORT_SCR_STAT = 0x113
[26593] ahci_start_port: PORT_SCR_ERR  = 0x0
[27156] ahci_reset_port: PORT_TFDATA = 0x150
[27156] ATA command for 0.5.0, slot 0:
[27156] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[27156] ata_cmd:   1530:4ad2  00 00 44 00 48 8c 1a 00-00 00 c8 4b               ..D.H......K
[27156] sg_list:   0638:7d80  24 f0 80 bc 00 00 00 00-00 00 00 00 ff 87 00 00   $...............
[27156] executing polled cmd on slot 0...[27531] ata_read_pp(): blocks transferred = 68
[27531] 
[27531] ahci_stop_port 0.5
[27531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[27531] IORB 06c8:2914 removed (queue = 0610:5e92)
[27531] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[27531] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[27531] ahci_read(0.5.0, 61443380, 4)
[27531] ahci_reset_port: resetting port 0.5
[27531] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[27531] ahci_stop_port 0.5
[27531] ahci_reset_port: setting link speed and power management options
[27531] ahci_reset_port: issuing COMRESET on port 5
[27533] Wait for communication...
[27562] ahci_reset_port: starting port 5 again
[27562] ahci_start_port 0.5
[27562] ahci_start_port: PORT_SCR_STAT = 0x113
[27562] ahci_start_port: PORT_SCR_ERR  = 0x0
[28125] ahci_reset_port: PORT_TFDATA = 0x150
[28125] ATA command for 0.5.0, slot 0:
[28125] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[28125] ata_cmd:   1530:4b3a  00 00 04 00 34 8d a9 00-00 00 c8 43               ....4......C
[28125] sg_list:   0638:7d80  e8 17 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00   ................
[28125] executing polled cmd on slot 0...[28500] ata_read_pp(): blocks transferred = 4
[28500] 
[28500] ahci_stop_port 0.5
[28500] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[28500] IORB 06c8:2914 removed (queue = 0610:5e92)
[28500] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[28500] IORB 06c8:2914 queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[28500] ahci_read(0.5.0, 186289220, 4)
[28500] ahci_reset_port: resetting port 0.5
[28500] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[28500] ahci_stop_port 0.5
[28500] ahci_reset_port: setting link speed and power management options
[28500] ahci_reset_port: issuing COMRESET on port 5
[28501] Wait for communication...
[28531] ahci_reset_port: starting port 5 again
[28531] ahci_start_port 0.5
[28531] ahci_start_port: PORT_SCR_STAT = 0x113
[28531] ahci_start_port: PORT_SCR_ERR  = 0x0
[29062] ahci_reset_port: PORT_TFDATA = 0x150
[29062] ATA command for 0.5.0, slot 0:
[29062] cmd_hdr:   0638:7800  05 00 01 00 00 00 00 00-00 1d f1 00 00 00 00 00   ................
[29062] ata_cmd:   1530:4b3a  00 00 04 00 44 8c 1a 00-00 00 c8 4b               ....D......K
[29062] sg_list:   0638:7d80  74 0d 83 bc 00 00 00 00-00 00 00 00 ff 07 00 00   t...............
[29062] executing polled cmd on slot 0...[29437] ata_read_pp(): blocks transferred = 4
[29437] 
[29437] ahci_stop_port 0.5
[29437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[29437] IORB 06c8:2914 removed (queue = 0610:5e92)
[29437] IORB 06c8:2914 complete (status = 0x0001, error = 0x0000)
[29437] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0610:5a4a [driver], timeout = 0)
[29437] leaving initialization mode
[29437] ahci_complete_init: completing initialization of adapter #0
[29437] registering interrupt #16
[29437] ahci_complete_init: resetting port 0
[29437] ahci_reset_port: resetting port 0.0
[29437] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x123
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x150
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[29437] ahci_stop_port 0.0
[29437] ahci_reset_port: setting link speed and power management options
[29437] ahci_reset_port: issuing COMRESET on port 0
[29439] Wait for communication...
[29468] ahci_reset_port: starting port 0 again
[29468] ahci_start_port 0.0
[29468] ahci_start_port: PORT_SCR_STAT = 0x123
[29468] ahci_start_port: PORT_SCR_ERR  = 0x0
[29500] ahci_reset_port: PORT_TFDATA = 0x150
[29500] ahci_complete_init: resetting port 1
[29500] ahci_reset_port: resetting port 0.1
[29500] AHCI port 1 registers:
 PORT_CMD       = 0xc0006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[29500] ahci_stop_port 0.1
[29500] ahci_reset_port: setting link speed and power management options
[29500] ahci_reset_port: issuing COMRESET on port 1
[29501] Wait for communication...
[29531] ahci_reset_port: starting port 1 again
[29531] ahci_start_port 0.1
[29531] ahci_start_port: PORT_SCR_STAT = 0x113
[29531] ahci_start_port: PORT_SCR_ERR  = 0x0
[29531] ahci_reset_port: PORT_TFDATA = 0x100
[29531] ahci_complete_init: resetting port 5
[29531] ahci_reset_port: resetting port 0.5
[29531] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[29531] ahci_stop_port 0.5
[29531] ahci_reset_port: setting link speed and power management options
[29531] ahci_reset_port: issuing COMRESET on port 5
[29533] Wait for communication...
[29562] ahci_reset_port: starting port 5 again
[29562] ahci_start_port 0.5
[29562] ahci_start_port: PORT_SCR_STAT = 0x113
[29562] ahci_start_port: PORT_SCR_ERR  = 0x0
[30093] ahci_reset_port: PORT_TFDATA = 0x150
Adapter 0: PCI=0:31:2 ID=8086:3b2f Intel PCH AHCI irq=16 addr=0xf2427000 version=10300
  Port 0:
    Drive 0: Drive present but n[130425] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[130425] ahci_read(0.5.0, 20493119, 8)
[130425] ATA command for 0.5.0, slot 19:
[130425] cmd_hdr:   0638:7a60  05 00 01 00 00 00 00 00-80 5f f1 00 00 00 00 00   ........._......
[130425] ata_cmd:   1530:562a  00 00 08 00 3f b3 38 00-00 00 c8 41               ....?.8....A
[130425] sg_list:   0638:c000  00 10 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
[130425] issuing command on slot 19
[130787] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130787] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00080000
[130787] ata_read_pp(): blocks transferred = 8
[130787] IORB 06f8:7e1f removed (queue = 0610:5e92)
[130787] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000)
[130787] IORB 06f8:7e1f queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[130787] ahci_read(0.5.0, 23688319, 8)
[130787] ATA command for 0.5.0, slot 20:
[130787] cmd_hdr:   0638:7a80  05 00 01 00 00 00 00 00-00 63 f1 00 00 00 00 00   .........c......
[130787] ata_cmd:   1530:5432  00 00 08 00 7f 74 69 00-00 00 c8 41               ....ti....A
[130787] sg_list:   0638:c380  00 20 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   . ..............
[130787] issuing command on slot 20
[130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00100000
[130798] ata_read_pp(): blocks transferred = 8
[130798] IORB 06f8:7e1f removed (queue = 0610:5e92)
[130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000)
[130798] IORB 06f8:7e1f queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0)
[130798] ahci_write(0.5.0, 61409927, 8)
[130798] ATA command for 0.5.0, slot 21:
[130798] cmd_hdr:   0638:7aa0  45 00 01 00 00 00 00 00-80 66 f1 00 00 00 00 00   E........f......
[130798] ata_cmd:   1530:54a4  00 00 08 00 87 0a a9 00-00 00 ca 43               ...........C
[130798] sg_list:   0638:c700  00 b0 cb bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
[130798] issuing command on slot 21
[130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00200000
[130798] ata_write_pp(): blocks transferred = 8
[130798] IORB 06f8:7e1f removed (queue = 0610:5e92)
[130798] IORB 06f8:7e1f complete (status = 0x0001, error = 0x0000)
[130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[130798] ahci_read(0.5.0, 20488207, 8)
[130798] ATA command for 0.5.0, slot 22:
[130798] cmd_hdr:   0638:7ac0  05 00 01 00 00 00 00 00-00 6a f1 00 00 00 00 00   .........j......
[130798] ata_cmd:   15e8:fd96  00 00 08 00 0f a0 38 00-00 00 c8 41               ......8....A
[130798] sg_list:   0638:ca80  00 30 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .0..............
[130798] issuing command on slot 22
[130798] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130798] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00400000
[130798] ata_read_pp(): blocks transferred = 8
[130798] IORB 06f8:7d0e removed (queue = 0610:5e92)
[130798] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000)
[130798] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[130798] ahci_read(0.5.0, 20487815, 8)
[130798] ATA command for 0.5.0, slot 23:
[130798] cmd_hdr:   0638:7ae0  05 00 01 00 00 00 00 00-80 6d f1 00 00 00 00 00   .........m......
[130798] ata_cmd:   1530:56fe  00 00 08 00 87 9e 38 00-00 00 c8 41               ......8....A
[130798] sg_list:   0638:ce00  00 40 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .@..............
[130798] issuing command on slot 23
[130800] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130800] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00800000
[130800] ata_read_pp(): blocks transferred = 8
[130800] IORB 06f8:7d0e removed (queue = 0610:5e92)
[130800] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000)
[130800] IORB 06f8:7d0e queued (cmd = 4/1, queue = 0610:5e92 [port], timeout = 0)
[130800] ahci_read(0.5.0, 20488719, 8)
[130800] ATA command for 0.5.0, slot 24:
[130800] cmd_hdr:   0638:7b00  05 00 01 00 00 00 00 00-00 71 f1 00 00 00 00 00   .........q......
[130800] ata_cmd:   1530:56de  00 00 08 00 0f a2 38 00-00 00 c8 41               ......8....A
[130800] sg_list:   0638:d180  00 50 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .P..............
[130800] issuing command on slot 24
[130832] port interrupt for adapter 0 port 5 stat 1 stack frame 15e8:ff9e
[130832] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x01000000
[130832] ata_read_pp(): blocks transferred = 8
[130832] IORB 06f8:7d0e removed (queue = 0610:5e92)
[130832] IORB 06f8:7d0e complete (status = 0x0001, error = 0x0000)
[130832] IORB 06f8:7d0e queued (cmd = 4/4, queue = 0610:5e92 [port], timeout = 0)
[130832] ahci_write(0.5.0, 27831087, 64)
[130832] ATA command for 0.5.0, slot 25:
[130832] cmd_hdr:   0638:7b20  45 00 08 00 00 00 00 00-80 74 f1 00 00 00 00 00   E........t......
[130832] ata_cmd:   1530:58c8  00 00 40 00 2f ab a8 00-00 00 ca 41               ..@./......A
[130832] sg_list:   0638:d500  00 e0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
0638:d510  00 f0 cd bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
0638:d520  00 00 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
0638:d530  00 10 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   ................
0638:d540  00 20 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   . ..............
0638:d550  00 30 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .0..............
0638:d560  00 40 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .@..............
0638:d570  00 50 ce bb 00 00 00 00-00 00 00 00 ff 0f 00 00   .P..............
[130832] issuing command on slot 25
