BldLevel: @#D Azarewicz:1.31#@##1## 8 Aug 2013 14:56:02      DAZAR1    ::::::@@AHCI Driver (c) Mensys BV 2013
CmdLine: OS2AHCI.ADD /d:2
[2001] scanning PCI bus...
[2783] Adapter 0 PCI=0:31:2 ID=8086:3b2f
[2783] BAR #0: type = I/O, addr = 0x00001818, size = 8
[2783] BAR #1: type = I/O, addr = 0x0000180c, size = 4
[2783] BAR #2: type = I/O, addr = 0x00001810, size = 8
[2783] BAR #3: type = I/O, addr = 0x00001808, size = 4
[2783] BAR #4: type = I/O, addr = 0x00001840, size = 32
[2783] BAR #5: type = MEM, addr = 0xf2427000, size = 2048
[4568] Registered kernel exit routine for INT13 mode
[4580] IORB 0668:8f42 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0)
[4580] ahci_save_bios_config: BIOS AHCI mode is 0
[4580] AHCI global registers for adapter 0 0:31:2 irq=16 addr=0xf2427000
 00: ff20ff65 - 64bit ncq sntf mps sss alpm led clo pio_multi ssc part ems sxs cmd_slots:32 ports:6
 04: 80000000 - ahci_enabled
 08: 00000000
 0c: 00000033
 10: 00010300
 14: 00000000
 18: 00000000
 1c: 01600002
 20: 07010000
 24: 00000004 - apst
[4580] ahci_scan_ports: scanning ports on adapter 0
[4580] ahci_scan_ports: Wait till not busy on port 0
[4580] ahci_reset_port: resetting port 0.0
[4580] AHCI port 0 registers:
 PORT_CMD       = 0x4002006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x621
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x50000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400000
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[4580] ahci_stop_port 0.0
[4580] ahci_reset_port: setting link speed and power management options
[4580] ahci_reset_port: issuing COMRESET on port 0
[4582] Wait for communication...
[4593] ahci_reset_port: starting port 0 again
[4593] ahci_start_port 0.0
[4593] ahci_start_port: PORT_SCR_STAT = 0x123
[4593] ahci_start_port: PORT_SCR_ERR  = 0x0
[4625] ahci_reset_port: PORT_TFDATA = 0x150
[4625] ahci_scan_ports: port 0 seems to be attached to a device; probing...
[4625] ATA command for 0.0.0, slot 0:
[4625] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 35 ef 00 00 00 00 00   .........5......
[4625] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 ec 00               ............
[4625] sg_list:   0628:0580  98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[4625] executing polled cmd...[4656]  SERR = 0x00010000[4656] failed
[4656] ahci_reset_port: resetting port 0.0
[4656] AHCI port 0 registers:
 PORT_CMD       = 0x400e017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x221
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x10000
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x400002
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[4656] ahci_stop_port 0.0
[4656] ahci_reset_port: setting link speed and power management options
[4656] ahci_reset_port: issuing COMRESET on port 0
[4656] Wait for communication...
[4687] ahci_reset_port: starting port 0 again
[4687] ahci_start_port 0.0
[4687] ahci_start_port: PORT_SCR_STAT = 0x123
[4687] ahci_start_port: PORT_SCR_ERR  = 0x0
[4718] ahci_reset_port: PORT_TFDATA = 0x150
[4718] ATA command for 0.0.0, slot 0:
[4718] cmd_hdr:   0628:0000  05 00 01 00 00 00 00 00-00 35 ef 00 00 00 00 00   .........5......
[4718] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 a1 00               ............
[4718] sg_list:   0628:0580  98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[4718] executing polled cmd...[5218]  TFDATA = 0x00000451[5218] failed
[5218] ahci_reset_port: resetting port 0.0
[5218] AHCI port 0 registers:
 PORT_CMD       = 0x4006017
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x1
link/device status:
 PORT_SCR_STAT  = 0x123
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x451
interrupt status:
 PORT_IRQ_STAT  = 0x40000001
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5218] ahci_stop_port 0.0
[5218] ahci_reset_port: setting link speed and power management options
[5218] ahci_reset_port: issuing COMRESET on port 0
[5218] Wait for communication...
[5250] ahci_reset_port: starting port 0 again
[5250] ahci_start_port 0.0
[5250] ahci_start_port: PORT_SCR_STAT = 0x123
[5250] ahci_start_port: PORT_SCR_ERR  = 0x0
[5281] ahci_reset_port: PORT_TFDATA = 0x150
[5281] ahci_stop_port 0.0
[5281] ahci_scan_ports: Wait till not busy on port 1
[5281] ahci_reset_port: resetting port 0.1
[5281] AHCI port 1 registers:
 PORT_CMD       = 0xc0006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5281] ahci_stop_port 0.1
[5281] ahci_reset_port: setting link speed and power management options
[5281] ahci_reset_port: issuing COMRESET on port 1
[5281] Wait for communication...
[5312] ahci_reset_port: starting port 1 again
[5312] ahci_start_port 0.1
[5312] ahci_start_port: PORT_SCR_STAT = 0x113
[5312] ahci_start_port: PORT_SCR_ERR  = 0x0
[5312] ahci_reset_port: PORT_TFDATA = 0x100
[5312] ahci_scan_ports: port 1 seems to be attached to a device; probing...
[5312] ATA command for 0.1.0, slot 0:
[5312] cmd_hdr:   0628:7800  05 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   ................
[5312] ata_cmd:   1530:4cd0  00 00 00 00 00 00 00 00-00 00 a1 00               ............
[5312] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00   ................
[5312] executing polled cmd...[5343] success
[5343] ATA_IDENTIFY_PACKET results:
0610:2e98  c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 2e 31   ...............1
0610:2ec8  41 46 20 20 20 20 70 4f-69 74 72 61 20 63 56 44   AF    pOitra cVD
0610:2ed8  20 44 57 52 41 20 2d 44-37 37 30 30 20 48 20 20    DWRA -D7700 H  
0610:2ee8  20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00                 ..
0610:2ef8  00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00   .....@..........
0610:2f08  00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00   ................
0610:2f18  03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00   ..x.x.x.x.......
0610:2f28  00 00 00 00 00 00 00 00-02 06 00 00 68 00 40 00   ............h.@.
0610:2f38  f8 01 00 00 18 42 00 40-00 40 18 42 00 00 00 40   .....B.@.@.B...@
0610:2f48  3f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ? ..............
0610:2f58  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f68  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f78  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f88  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2f98  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2fa8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2fb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2fc8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2fd8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2fe8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ff8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3008  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3018  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3028  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3038  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3048  00 00 00 00 00 00 00 00-00 00 00 00 1f 10 00 00   ................
0610:3058  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3068  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3078  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:3088  00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 21   ...............!
[5343] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1
[5343] ahci_stop_port 0.1
[5343] ahci_scan_ports: Wait till not busy on port 4
[5343] ahci_reset_port: resetting port 0.4
[5343] AHCI port 4 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x0
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x7f
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5343] ahci_stop_port 0.4
[5343] ahci_reset_port: setting link speed and power management options
[5343] ahci_reset_port: issuing COMRESET on port 4
[5345] Wait for communication...
[5875] no device present after resetting port #4 (PORT_SCR_STAT = 0x0)
[5875] ahci_stop_port 0.4
[5875] ahci_scan_ports: Wait till not busy on port 5
[5875] ahci_reset_port: resetting port 0.5
[5875] AHCI port 5 registers:
 PORT_CMD       = 0x242006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x0
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x7f
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[5875] ahci_stop_port 0.5
[5875] ahci_reset_port: setting link speed and power management options
[5875] ahci_reset_port: issuing COMRESET on port 5
[5875] Wait for communication...
[6375] no device present after resetting port #5 (PORT_SCR_STAT = 0x0)
[6375] ahci_stop_port 0.5
[6375] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0
[6375] IORB 0668:8f42 removed (queue = 0610:59b8)
[6375] IORB 0668:8f42 complete (status = 0x0001, error = 0x0000)
[6527] IORB 06c0:03d0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0)
[6527] IORB 06c0:03d0 removed (queue = 0610:59b8)
[6527] IORB 06c0:03d0 complete (status = 0x0001, error = 0x0000)
[6527] IORB 06c0:03d0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0)
[6527] IORB 06c0:03d0 removed (queue = 0610:59b8)
[6527] IORB 06c0:03d0 complete (status = 0x0001, error = 0x0000)
[6529] IORB 06d0:c56c queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0)
[6529] IORB 06d0:c56c removed (queue = 0610:59b8)
[6529] IORB 06d0:c56c complete (status = 0x0001, error = 0x0000)
[6535] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0610:59b8 [driver], timeout = 0)
[6535] leaving initialization mode
[6535] ahci_complete_init: completing initialization of adapter #0
[6535] registering interrupt #16
[6535] ahci_complete_init: resetting port 1
[6535] ahci_reset_port: resetting port 0.1
[6535] AHCI port 1 registers:
 PORT_CMD       = 0xc0006
command engine status:
 PORT_SCR_ACT   = 0x0
 PORT_CMD_ISSUE = 0x0
link/device status:
 PORT_SCR_STAT  = 0x113
 PORT_SCR_CTL   = 0x0
 PORT_SCR_ERR   = 0x0
 PORT_TFDATA    = 0x50
interrupt status:
 PORT_IRQ_STAT  = 0x0
 PORT_IRQ_MASK  = 0x0
 HOST_IRQ_STAT  = 0x0
[6535] ahci_stop_port 0.1
[6535] ahci_reset_port: setting link speed and power management options
[6535] ahci_reset_port: issuing COMRESET on port 1
[6537] Wait for communication...
[6562] ahci_reset_port: starting port 1 again
[6562] ahci_start_port 0.1
[6562] ahci_start_port: PORT_SCR_STAT = 0x113
[6562] ahci_start_port: PORT_SCR_ERR  = 0x0
[6562] ahci_reset_port: PORT_TFDATA = 0x100
Adapter 0: PCI=0:31:2 ID=8086:2681 irq=16 addr=0xf2427000 version=10300
  Port 0:
    No drive present
  Port 1:
    Drive 0: atapi removable Drive present but no information available. Not queried by OS.
  Port 2:
    No drive present
  Port 3:
    No drive present
  Port 4:
    No drive present
  Port 5:
    No drive present
[6562] IORB 0130:0ca5 removed (queue = 0610:59b8)
[6562] IORB 0130:0ca5 complete (status = 0x0001, error = 0x0000)
[6605] IORB 08a8:cee0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0)
[6605] IORB 08a8:cee0 removed (queue = 0610:59b8)
[6605] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000)
[6605] IORB 08a8:cee0 queued (cmd = 2/1, queue = 0610:5b74 [port], timeout = 0)
[6605] IORB 08a8:cee0 removed (queue = 0610:5b74)
[6605] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000)
[6605] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[6605] ahci_execute_cdb(0.1.0): 08a8:cf64  00 00 00 00 00 00                                 ......
[6605] ATA command for 0.1.0, slot 1:
[6605] cmd_hdr:   0628:7820  65 00 00 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[6605] ata_cmd:   1530:4d94  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[6605] atapi_cmd: 1530:4e12  00 00 00 00 00 00 00 00-00 00 00 00               ............
[6605] issuing command on slot 1
[6607] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[6607] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002
[6607] IORB 08a8:cee0 removed (queue = 0610:5b74)
[6607] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000)
[6812] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[6812] ahci_execute_cdb(0.1.0): 08a8:cf64  03 00 00 00 12 00                                 ......
[6812] ATA command for 0.1.0, slot 2:
[6812] cmd_hdr:   0628:7840  25 00 01 00 00 00 00 00-00 b4 ef 00 00 00 00 00   %...............
[6812] ata_cmd:   1530:4d94  05 00 00 00 00 00 00 00-00 00 a0 00               ............
[6812] atapi_cmd: 1530:4e12  03 00 00 00 12 00 00 00-00 00 00 00               ............
[6812] sg_list:   0628:8480  74 1f ec 00 00 00 00 00-00 00 00 00 11 00 00 00   t...............
[6812] issuing command on slot 2
[6812] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[6812] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000004
[6812] IORB 08a8:cee0 removed (queue = 0610:5b74)
[6812] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000)
[7031] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[7031] ahci_execute_cdb(0.1.0): 08a8:cf64  12 00 00 00 2c 00                                 ....,.
[7031] ATA command for 0.1.0, slot 3:
[7031] cmd_hdr:   0628:7860  25 00 01 00 00 00 00 00-80 b7 ef 00 00 00 00 00   %...............
[7031] ata_cmd:   1530:4d94  05 00 00 00 00 00 00 00-00 00 a0 00               ............
[7031] atapi_cmd: 1530:4e12  12 00 00 00 2c 00 00 00-00 00 00 00               ....,.......
[7031] sg_list:   0628:8800  2a 5c eb 00 00 00 00 00-00 00 00 00 2b 00 00 00   *\..........+...
[7031] issuing command on slot 3
[7031] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[7031] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000008
[7031] IORB 08a8:cee0 removed (queue = 0610:5b74)
[7031] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000)
[7250] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[7250] ahci_execute_cdb(0.1.0): 08a8:cf64  15 10 00 00 14 00                                 ......
[7250] ATA command for 0.1.0, slot 4:
[7250] cmd_hdr:   0628:7880  65 00 01 00 00 00 00 00-00 bb ef 00 00 00 00 00   e...............
[7250] ata_cmd:   1530:4d78  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7250] atapi_cmd: 1530:4df6  15 10 00 00 14 00 00 00-00 00 00 00               ............
[7250] sg_list:   0628:8b80  74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00   t...............
[7250] issuing command on slot 4
[7250] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[7250] port #1 interrupt error status: 0x40000001; restarting port
[7250] restart_ctxhook() started
[7250] port 1, TF_DATA: 0x5451
[7250]  PORT_CMD      = 0x4
[7250] failing IORB: 08a8:cee0
[7250] ahci_stop_port 0.1
[7250] ahci_start_port 0.1
[7250] ahci_start_port: PORT_SCR_STAT = 0x113
[7250] ahci_start_port: PORT_SCR_ERR  = 0x0
[7250] atapi_req_sense
[7250] ATA command for 0.1.0, slot 0:
[7250] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[7250] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7250] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[7250] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[7250] restart_ctxhook() completed
[7250] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[7250] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[7250] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[7250] IORB 08a8:cee0 removed (queue = 0610:5b74)
[7250] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102)
[7468] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[7468] ahci_execute_cdb(0.1.0): 08a8:cf64  15 10 00 00 14 00                                 ......
[7468] ATA command for 0.1.0, slot 1:
[7468] cmd_hdr:   0628:7820  65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[7468] ata_cmd:   1530:4d78  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7468] atapi_cmd: 1530:4df6  15 10 00 00 14 00 00 00-00 00 00 00               ............
[7468] sg_list:   0628:8100  74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00   t...............
[7468] issuing command on slot 1
[7468] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[7468] port #1 interrupt error status: 0x40000001; restarting port
[7468] restart_ctxhook() started
[7468] port 1, TF_DATA: 0x5451
[7468]  PORT_CMD      = 0x1
[7468] failing IORB: 08a8:cee0
[7468] ahci_stop_port 0.1
[7468] ahci_start_port 0.1
[7468] ahci_start_port: PORT_SCR_STAT = 0x113
[7468] ahci_start_port: PORT_SCR_ERR  = 0x0
[7468] atapi_req_sense
[7468] ATA command for 0.1.0, slot 0:
[7468] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[7468] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7468] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[7468] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[7468] restart_ctxhook() completed
[7468] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[7468] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[7468] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[7468] IORB 08a8:cee0 removed (queue = 0610:5b74)
[7468] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102)
[7687] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[7687] ahci_execute_cdb(0.1.0): 08a8:cf64  15 10 00 00 14 00                                 ......
[7687] ATA command for 0.1.0, slot 1:
[7687] cmd_hdr:   0628:7820  65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[7687] ata_cmd:   1530:4d78  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7687] atapi_cmd: 1530:4df6  15 10 00 00 14 00 00 00-00 00 00 00               ............
[7687] sg_list:   0628:8100  74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00   t...............
[7687] issuing command on slot 1
[7687] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[7687] port #1 interrupt error status: 0x40000001; restarting port
[7687] restart_ctxhook() started
[7687] port 1, TF_DATA: 0x5451
[7687]  PORT_CMD      = 0x1
[7687] failing IORB: 08a8:cee0
[7687] ahci_stop_port 0.1
[7687] ahci_start_port 0.1
[7687] ahci_start_port: PORT_SCR_STAT = 0x113
[7687] ahci_start_port: PORT_SCR_ERR  = 0x0
[7687] atapi_req_sense
[7687] ATA command for 0.1.0, slot 0:
[7687] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[7687] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7687] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[7687] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[7687] restart_ctxhook() completed
[7687] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[7687] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[7687] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[7687] IORB 08a8:cee0 removed (queue = 0610:5b74)
[7687] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102)
[7906] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[7906] ahci_execute_cdb(0.1.0): 08a8:cf64  15 10 00 00 0c 00                                 ......
[7906] ATA command for 0.1.0, slot 1:
[7906] cmd_hdr:   0628:7820  65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[7906] ata_cmd:   1530:4d94  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7906] atapi_cmd: 1530:4e12  15 10 00 00 0c 00 00 00-00 00 00 00               ............
[7906] sg_list:   0628:8100  74 1f ec 00 00 00 00 00-00 00 00 00 0b 00 00 00   t...............
[7906] issuing command on slot 1
[7906] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[7906] port #1 interrupt error status: 0x40000001; restarting port
[7906] restart_ctxhook() started
[7906] port 1, TF_DATA: 0x5451
[7906]  PORT_CMD      = 0x1
[7906] failing IORB: 08a8:cee0
[7906] ahci_stop_port 0.1
[7906] ahci_start_port 0.1
[7906] ahci_start_port: PORT_SCR_STAT = 0x113
[7906] ahci_start_port: PORT_SCR_ERR  = 0x0
[7906] atapi_req_sense
[7906] ATA command for 0.1.0, slot 0:
[7906] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[7906] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[7906] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[7906] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[7906] restart_ctxhook() completed
[7906] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[7906] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[7906] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[7906] IORB 08a8:cee0 removed (queue = 0610:5b74)
[7906] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102)
[8125] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[8125] ahci_execute_cdb(0.1.0): 08a8:cf64  15 10 00 00 14 00                                 ......
[8125] ATA command for 0.1.0, slot 1:
[8125] cmd_hdr:   0628:7820  65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[8125] ata_cmd:   1530:4d94  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8125] atapi_cmd: 1530:4e12  15 10 00 00 14 00 00 00-00 00 00 00               ............
[8125] sg_list:   0628:8100  74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00   t...............
[8125] issuing command on slot 1
[8125] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[8125] port #1 interrupt error status: 0x40000001; restarting port
[8125] restart_ctxhook() started
[8125] port 1, TF_DATA: 0x5451
[8125]  PORT_CMD      = 0x1
[8125] failing IORB: 08a8:cee0
[8125] ahci_stop_port 0.1
[8125] ahci_start_port 0.1
[8125] ahci_start_port: PORT_SCR_STAT = 0x113
[8125] ahci_start_port: PORT_SCR_ERR  = 0x0
[8125] atapi_req_sense
[8125] ATA command for 0.1.0, slot 0:
[8125] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[8125] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8125] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[8125] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[8125] restart_ctxhook() completed
[8125] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[8125] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[8125] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[8125] IORB 08a8:cee0 removed (queue = 0610:5b74)
[8125] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102)
[8345] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[8345] ahci_execute_cdb(0.1.0): 08a8:0f62  00 00 00 00 00 00                                 ......
[8345] ATA command for 0.1.0, slot 1:
[8345] cmd_hdr:   0628:7820  65 00 00 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[8345] ata_cmd:   1530:4be4  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8345] atapi_cmd: 1530:4c62  00 00 00 00 00 00 00 00-00 00 00 00               ............
[8345] issuing command on slot 1
[8347] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[8347] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002
[8347] IORB 08a8:0ede removed (queue = 0610:5b74)
[8347] IORB 08a8:0ede complete (status = 0x0001, error = 0x0000)
[8347] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[8347] ahci_execute_cdb(0.1.0): 08a8:0f62  15 10 00 00 0c 00                                 ......
[8347] ATA command for 0.1.0, slot 2:
[8347] cmd_hdr:   0628:7840  65 00 01 00 00 00 00 00-00 b4 ef 00 00 00 00 00   e...............
[8347] ata_cmd:   1530:4be0  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8347] atapi_cmd: 1530:4c5e  15 10 00 00 0c 00 00 00-00 00 00 00               ............
[8347] sg_list:   0628:8480  72 5f eb 00 00 00 00 00-00 00 00 00 0b 00 00 00   r_..............
[8347] issuing command on slot 2
[8347] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[8347] port #1 interrupt error status: 0x40000001; restarting port
[8347] restart_ctxhook() started
[8347] port 1, TF_DATA: 0x5451
[8347]  PORT_CMD      = 0x2
[8347] failing IORB: 08a8:0ede
[8347] ahci_stop_port 0.1
[8347] ahci_start_port 0.1
[8347] ahci_start_port: PORT_SCR_STAT = 0x113
[8347] ahci_start_port: PORT_SCR_ERR  = 0x0
[8347] atapi_req_sense
[8347] ATA command for 0.1.0, slot 0:
[8347] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[8347] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8347] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[8347] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[8347] restart_ctxhook() completed
[8347] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[8347] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[8347] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[8347] IORB 08a8:0ede removed (queue = 0610:5b74)
[8347] IORB 08a8:0ede complete (status = 0x000b, error = 0x0102)
[8347] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[8347] ahci_execute_cdb(0.1.0): 08a8:0f62  15 10 00 00 18 00                                 ......
[8347] ATA command for 0.1.0, slot 1:
[8347] cmd_hdr:   0628:7820  65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   e...............
[8347] ata_cmd:   1530:4be0  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8347] atapi_cmd: 1530:4c5e  15 10 00 00 18 00 00 00-00 00 00 00               ............
[8347] sg_list:   0628:8100  72 5f eb 00 00 00 00 00-00 00 00 00 17 00 00 00   r_..............
[8347] issuing command on slot 1
[8349] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e
[8349] port #1 interrupt error status: 0x40000001; restarting port
[8349] restart_ctxhook() started
[8349] port 1, TF_DATA: 0x5451
[8349]  PORT_CMD      = 0x1
[8349] failing IORB: 08a8:0ede
[8349] ahci_stop_port 0.1
[8349] ahci_start_port 0.1
[8349] ahci_start_port: PORT_SCR_STAT = 0x113
[8349] ahci_start_port: PORT_SCR_ERR  = 0x0
[8349] atapi_req_sense
[8349] ATA command for 0.1.0, slot 0:
[8349] cmd_hdr:   0628:7800  25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00   %...............
[8349] ata_cmd:   1530:4e5a  01 00 00 00 00 00 00 00-00 00 a0 00               ............
[8349] atapi_cmd: 1530:4ed0  03 00 00 00 60 00 00 00-00 00 00 00               ....`.......
[8349] sg_list:   0628:7d80  98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00   ............_...
[8349] restart_ctxhook() completed
[8349] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[8349] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001
[8349] sense buffer:
0610:2e98  70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00   p........... ...
0610:2ea8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2eb8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ec8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ed8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
0610:2ee8  00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00   ................
[8349] IORB 08a8:0ede removed (queue = 0610:5b74)
[8349] IORB 08a8:0ede complete (status = 0x000b, error = 0x0102)
[8349] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0)
[8349] ahci_execute_cdb(0.1.0): 08a8:0f62  46 02 00 00 00 00 00 00-0c 00                     F.........
[8349] ATA command for 0.1.0, slot 1:
[8349] cmd_hdr:   0628:7820  25 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00   %...............
[8349] ata_cmd:   1530:4b96  05 00 00 00 00 00 00 00-00 00 a0 00               ............
[8349] atapi_cmd: 1530:4c14  46 02 00 00 00 00 00 00-0c 00 00 00               F...........
[8349] sg_list:   0628:8100  72 5f eb 00 00 00 00 00-00 00 00 00 0b 00 00 00   r_..............
[8349] issuing command on slot 1
[8351] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e
[8351] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002
[8351] IORB 08a8:0ede removed (queue = 0610:5b74)
[8351] IORB 08a8: