id	summary	reporter	owner	description	type	status	priority	milestone	component	version	resolution	keywords	cc
41	System hangs during boot with add-in PCIe SATA card	thomabrown	David Azarewicz	"I'm out of SATA ports on my mobo (Tyan S2895 K8WE) so I bought a PCIe 4-port SATA card with a Marvell chipset. PCI shows:

Bus 129 (PCI Express), Device Number 0, Device Function 0
 Vendor 1B4Bh Marvell Technology Group Ltd.
 Device 9230h 88SE9230 PCIe SATA 6Gb/s Controller
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 10h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Storage, type Serial ATA (AHCI 1.0)
 Subsystem ID 92301B4Bh Unknown (Generic ID)
 Subsystem Vendor 1B4Bh Marvell Technology Group Ltd.
 Address 0 is an I/O Port : 5030h..5037h
 Address 1 is an I/O Port : 5024h..5027h
 Address 2 is an I/O Port : 5028h..502Fh
 Address 3 is an I/O Port : 5020h..5023h
 Address 4 is an I/O Port : 5000h..501Fh
 Address 5 is a Memory Address (0-4GiB) : D0500000h..D05007FFh
 System IRQ 5, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   PCI Express Capability, Version 2
     Device/Port Type : 
       Legacy PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x2
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x2
   Unknown Capability (Code 12h)!!

System boots OK with no drives connected. Adding a drive causes a hang during boot. I have recorded the debug log on another machine per the troubleshooting doc.

[d:\]bldlevel os2krnl
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#IBM:14.106#@_SMP  IBM OS/2 Kernel
Vendor:          IBM
Revision:        14.106
File Version:    14.106
Description:     _SMP  IBM OS/2 Kernel

[d:\]bldlevel \os2\boot\OS2AHCI.ADD
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#D Azarewicz:1.32#@##1## 10 Nov 2013 07:58:57     DAZAR1    ::::::@@AHCI
 Driver (c) 2013 D Azarewicz
Vendor:          D Azarewicz
Revision:        1.32
Date/Time:       10 Nov 2013 07:58:57
Build Machine:   DAZAR1
File Version:    1.32
Description:     AHCI Driver (c) 2013 D Azarewicz

[d:\]bldlevel \os2\boot\acpi.psd
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#D Azarewicz:3.22.03#@##1## 28 Nov 2013 11:00:28     DAZAR1    ::::03::@
@ACPI based PSD for eCS (c) 2013 D Azarewicz
Vendor:          D Azarewicz
Revision:        3.22.03
Date/Time:       28 Nov 2013 11:00:28
Build Machine:   DAZAR1
File Version:    3.22.3
Description:     ACPI based PSD for eCS (c) 2013 D Azarewicz

I have attached the log from the other machine.
Is there anything else you need?

Thanks!"	comment	closed	Feedback Pending		driver	1.32	NoChangeNeeded		steve53@…