AllocIRQMem at 0xFFE64000 (24576 bytes)
@#netlabs dot org:3.11#@ACPI core PSD Driver. (c) netlabs.org 2005-2008 Build date: Sep 30 2008 13:49:18
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFE50000 Size:0x8000
PSD_INIT ESP=0xFFE4FFE0
AcpiOsInitialize ALLOC size 65536 at 0xF9AB0000
AcpiOsInitialize MapMem size 4096 at 0xFFE8A000
AcpiOsCreateLock F9C172E4
AcpiOsCreateLock F9C1CCB4
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsPredefinedOverride: "_OSI"
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF6750/0x14 (v0 LENOVO)
ACPI: RSDT @ 0x3BF12562/0x40 (v1 LENOVO TC-2N    0x31  LTP 0x0)
ACPI: FACP @ 0x3BF16C64/0x74 (v1 LENOVO TC-2N    0x31 PTL_ 0xF4240)
ACPI: DSDT @ 0x3BF125A2/0x46C2 (v1 LENOVO TC-2N    0x31 MSFT 0x100000E)
ACPI: FACS @ 0x3BF17FC0/0x40
ACPI: TCPA @ 0x3BF16CD8/0x32 (v2 LENOVO TC-2N    0x31 PTL  0x1)
ACPI: SSDT @ 0x3BF16D0A/0x206 (v1 PTLTD  POW2NNOW 0x31  LTP 0x1)
ACPI: MCFG @ 0x3BF16F10/0x3C (v1 PTLTD    M2NG   0x31  LTP 0x0)
ACPI: HPET @ 0x3BF16F4C/0x38 (v1 PTLTD  HPE2NBL  0x31  LTP 0x1)
ACPI: APIC @ 0x3BF16F84/0x54 (v1 PTLTD   0x31  LTP 0x0)
ACPI: BOOT @ 0x3BF16FD8/0x28 (v1 PTLTD  $SB2NBL$ 0x31  LTP 0x1)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFE2B5A2 New:FFE4FFAC SIG:[DSDT]
tbxface-620 [2] TbLoadNamespace: ACPI Tables successfully acquired
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [TCPA]
Table [SSDT]
Table [MCFG]
Table [HPET]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Table [BOOT]
Size of FACDT 244
Type of computer - Unspecified
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x142E
The value to write to SMI_CMD to disable SMI   0xF0
The value to write to SMI_CMD to re-enable SMI 0xF1
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 1000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 1004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 1484
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 1008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 1020
System port address of General-Purpose Event 1 Register Block 0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x0
Offset within the ACPI general-purpose event model where GPE1 based events start 0
GPE enable register: 0: 0: 10: 0
GPE status register: 2: 0: 0: 0
The system does not support a C2 state. FFFF
The system does not support a C3 state FFFF
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags A5
The reset register:
Type of address space - System Memory
Register Bit Width  0
Register Bit Offset 0
Access size 0
Address 0
The value to write to the RESET_REG port to reset the system 0
***** Throttl Width 0 Offset 1
evxfevnt-176 [2] Enable: Transition to ACPI mode successful
evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9
AcpiOsInstallIntterrupHandler IRQ9 handler F9AEEC41
** AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[MMTO],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
** Scan EC Status = 0
Completing Region/Field/Buffer/Package initialization:....................................................................................
Initialized 22/29 Regions 5/5 Fields 30/30 Buffers 27/27 Packages (673 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 82 objects)
evgpeblk-1211 [3] EvInitializeGpeBlock: Found 5 Wake, Enabled 2 Runtime GPEs in this block
** AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0

Init ACPI rc=0
APIC0 phys FEC00000 lin: FFE45000 APIC ID 2000000 (170011) Ver 11 MaxIO entry 0x17 (2000000) Arbitration ID 2 set to (2000000) 2 Id  (2000000) 2
Set 24 lines from IRQ0
WakeupVector Lin: FFE44000 Phys: 6D000 IPIStack:FFE31000 s_cpu:0
GetWakeupVector Status = 0
PIC Mask:FFFFDFFB
ProcInit CPU0
UNMASK IRQ8 mask 0xFFFFDEFB Real:FFEB7CAC
OemHlpXHandler: ACPI.CFG opened: Size is 3355 bytes
OemHlpXHandler: ACPI.CFG read: 3355 bytes
OemHlpXHandler: ACPI.CFG closed: 0, Buffer at FD39E4D8
PSDFree: at 0xF9C00000 success!
Found bridge "PCI0" BBN is absent status:5
Finding:0 bridges
0:0.0  Class:500  Hdr:80
0:0.1  Class:500  Hdr:80
0:0.2  Class:500  Hdr:80
0:0.3  Class:500  Hdr:80
0:0.4  Class:500  Hdr:0
0:0.5  Class:500  Hdr:80
0:0.6  Class:500  Hdr:80
0:0.7  Class:500  Hdr:80
0:2.0  Class:604  Hdr:1   Bridge 0->1
0:5.0  Class:300  Hdr:0
0:9.0  Class:500  Hdr:0
0:10.0  Class:601  Hdr:80
0:10.1  Class:C05  Hdr:80
0:10.2  Class:500  Hdr:80
0:11.0  Class:C03  Hdr:80
0:11.1  Class:C03  Hdr:80
0:13.0  Class:101  Hdr:0
0:14.0  Class:101  Hdr:0
0:16.0  Class:604  Hdr:81   Bridge 0->3
0:16.1  Class:403  Hdr:80
0:24.0  Class:600  Hdr:80   Bridge H->0
0:24.1  Class:600  Hdr:80   Bridge H->0
0:24.2  Class:600  Hdr:80   Bridge H->0
0:24.3  Class:600  Hdr:80   Bridge H->0
3:8.0  Class:200  Hdr:0
PCI Bus scan: 4 PCI buses found.
Scan ACPI tree for PCI functions
0:0.0  'PCI0' (F9AB2088)
0:10.0  'LPC0' (F9AB2618)
0:0.6  'Z003' (F9AB5890)
0:10.1  'SMB0' (F9AB5968)
0:11.0  'USB0' (F9AB5FB8)
0:11.1  'USB2' (F9AB6128)
0:20.0  'MAC0' (F9AB61A0)
0:16.1  'AZA0' (F9AB6218)
0:16.2  'ACI0' (F9AB6268)
0:16.3  'MCI0' (F9AB62B8)
0:16.0  'P2P0' (F9AB6308)
3:5.0  'SLT0' (F9AB6550)
3:6.0  'SLT1' (F9AB65C8)
3:8.0  'LANC' (F9AB6640)
0:13.0  'IDE0' (F9AB68A0)
0:14.0  'SAT0' (F9AB7360)
0:15.0  'SAT1' (F9AB77E0)
0:4.0  'XVR0' (F9AB7C60)
0:3.0  'XVR1' (F9AB7E80)
0:2.0  'XVR2' (F9AB8150)
1:0.0  'X2S0' (F9AB8370)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F9AB2088) _PRT
0:2.0  class:604  type: 1  Bus 0->1  ACPI: 'XVR2' (F9AB8150) _PRT
0:16.0  class:604  type: 1  Bus 0->3  ACPI: 'P2P0' (F9AB6308) _PRT
IRQLinks found:
0: 'LSMB' (F9AB9E90)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:10.1
                       A[ 16,#17, 18, 19, 20, 21, 22, 23] <- 0:10.1
1: 'LUS0' (F9ABA340)  P[*5, 7, 9, 10, 11, 14, 15] <- 0:11.0
                       A[ 16, 17,#18, 19, 20, 21, 22, 23] <- 0:11.0
2: 'LUS2' (F9ABA598)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:11.1
                       A[ 16, 17, 18,#19, 20, 21, 22, 23] <- 0:11.1
3: 'LMAC' (F9ABA7F0)  P[]
                       A[]
4: 'LAZA' (F9ABAA48)  P[ 5, 7, 9, 10, 11, 14, 15] <- 0:16.1
                       A[ 16, 17, 18, 19, 20,#21, 22, 23] <- 0:16.1
5: 'LACI' (F9ABACA0)  P[]
                       A[]
6: 'LMCI' (F9ABAEF8)  P[]
                       A[]
7: 'LPID' (F9ABB150)  P[]
                       A[]
8: 'LTID' (F9ABB3A8)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:14.0
                       A[ 16, 17, 18, 19,#20, 21, 22, 23] <- 0:14.0
9: 'LSI1' (F9ABB600)  P[]
                       A[]
10: 'LK3E' (F9AB99E0)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:5.0
                       A[#16, 17, 18, 19, 20, 21, 22, 23] <- 0:5.0
11: 'LK4E' (F9AB9C38)  P[]
                       A[]
12: 'LK1E' (F9AB9530)  P[]
                       A[]
13: 'LK2E' (F9AB9788)  P[]
                       A[]
14: 'LNK1' (F9AB8BD0)  P[]
                       A[]
15: 'LNK2' (F9AB8E28)  P[]
                       A[]
16: 'LNK3' (F9AB9080)  P[]
                       A[]
17: 'LNK4' (F9AB92D8)  P[ 5, 7, 9, 10,*11, 14, 15] <- 3:8.0
                       A[ 5, 7, 10,*11, 14, 15] <- 3:8.0
PCI devices found:
0:0.0  10DE:2F1  'PCI0'
0:0.1  10DE:2FA        
0:0.2  10DE:2FE        
0:0.3  10DE:2F8        
0:0.4  10DE:2F9        
0:0.5  10DE:2FF        
0:0.6  10DE:27F  'Z003'
0:0.7  10DE:27E        
0:2.0  10DE:2FC  'XVR2'
0:5.0  10DE:242          IRQs: PCI:10 PIC:'LK3E':10 APIC:'LK3E':16 MSI
0:9.0  10DE:270        
0:10.0  10DE:261  'LPC0'
0:10.1  10DE:264  'SMB0'  IRQs: PCI:10 PIC:'LSMB':10 APIC:'LSMB':17
0:10.2  10DE:272        
0:11.0  10DE:26D  'USB0'  IRQs: PCI:5 PIC:'LUS0':5 APIC:'LUS0':18
0:11.1  10DE:26E  'USB2'  IRQs: PCI:10 PIC:'LUS2':10 APIC:'LUS2':19
0:13.0  10DE:265  'IDE0'
0:14.0  10DE:266  'SAT0'  IRQs: PCI:10 PIC:'LTID':10 APIC:'LTID':20 MSI
0:16.0  10DE:26F  'P2P0'
0:16.1  10DE:26C  'AZA0'  IRQs: PCI:10 PIC:'LAZA': R 10 APIC:'LAZA':21 MSI
0:24.0  1022:1100        
0:24.1  1022:1101        
0:24.2  1022:1102        
0:24.3  1022:1103        
3:8.0  14E4:169C  'LANC'  IRQs: PCI:11 PIC:'LNK4':11 APIC:'LNK4':11 MSI
Bus detected - 3
=========== Status set APIC mode 0x0
UNMASK IRQ9 mask 0xFFFFDCFB Real:FFEB7CAC
** Create resource, max = 31 **
OemHlpXHandler: ACPI_START_EVENTS 3
** AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20080729]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20080729]
** AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
** AcpiInstall PMTimer Device Status = 0
** Total use:102104 unuse:7960 count:1791 **
Get GpeHdl Status = 0 - AE_OK
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
Event [_L14]
Install GPE0x14  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F9AA0B60 in arg F9AA0B60
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x3 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:1020 Enable:1024 EnableWake:21 EnableRun:8 BaseGPENumber:0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:1021 Enable:1025 EnableWake:28 EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x14 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE2 Status:1022 Enable:1026 EnableWake:1 EnableRun:10 BaseGPENumber:10
GPE3 Status:1023 Enable:1027 EnableWake:0 EnableRun:0 BaseGPENumber:18
=========== Status 0x0 0
OemHlpXHandler: ACPI_START_EVENTS 4
OemHlpXHandler: CallACPI16: 4900909, CallACPI32: F9AC54A2, ExportTable32: F9C10178
UNMASK IRQ1 mask 0xFFFFDCF9 Real:FFEB7CAC
UNMASK IRQ10 mask 0xFFFFD8F9 Real:FFEB7CAC
PIC MASK IRQ10 mask:FFFFDCF9
UNMASK IRQ5 mask 0xFFFFDCD9 Real:FFEB7CAC
PIC MASK IRQ5 mask:FFFFDCF9
APM: PSD find success. PSD Ftable:F9C1017C
Register Notify 1st FFC6A1CE 
UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEB7CAC
PIC MASK IRQ6 mask:FFFFDCF9
UNMASK IRQ6 mask 0xFFFFDCB9 Real:FFEB7CAC
PIC MASK IRQ6 mask:FFFFDCF9
FindPCIDevice
 Need: B:0 D:D F:0
FindPCIDevice
 Need: B:0 D:E F:0
Finding APIC0 PIC10 Dev: [SAT0]
UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC
PIC MASK IRQ14 mask:FFFFDCF9
UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC
PIC MASK IRQ14 mask:FFFFDCF9
UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC
PIC MASK IRQ14 mask:FFFFDCF9
UNMASK IRQ14 mask 0xFFFF9CF9 Real:FFEB7CAC
UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ10 mask:FFFF9CF9
UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ10 mask:FFFF9CF9
UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ10 mask:FFFF9CF9
UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ14 mask:FFFFD8F9
UNMASK IRQ14 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ10 mask:FFFF9CF9
UNMASK IRQ10 mask 0xFFFF98F9 Real:FFEB7CAC
PIC MASK IRQ1 mask:FFFF98FB
UNMASK IRQ1 mask 0xFFFF98F9 Real:FFEB7CAC
UNMASK IRQ12 mask 0xFFFF88F9 Real:FFEB7CAC
UNMASK IRQ4 mask 0xFFFF88E9 Real:FFEB7CAC
PIC MASK IRQ4 mask:FFFF88F9
Gradd: PSD find success. PSD Ftable:F9C1017C
UNMASK IRQ5 mask 0xFFFF88D9 Real:FFEB7CAC
UNMASK IRQ10 mask 0xFFFF88D9 Real:FFEB7CAC
OemHlpXHandler: CMD_INIT_COMPLETE
PSD_SET_ADV_INT_MODE Apic 0 IOMask FFFFFFFF Mask:FFFF88D9
UNMASK IRQ0 mask 0xFFFF88D8 Real:FFEB7CAC
******** Event tread ***************
AllocateSuspendMemory s_cpu:0
Alloc s_cpu OK CPU0 2304 bytes at FE600BD0
AllocSuspend: CPU0 CR3:225000
Status 1Mb alloc 0
APM: Setting suspend state:1
Button KernBlock 4294967295 timeout
AcpiExecSMPFunction: Unicall
AcpiExecSMPFunction: End
