PSD_install options:" /O1 /SMP" @#netlabs dot org:3.7#@ACPI core PSD Driver. (c)                                                                                
 netlabs.org 2005-2008 Build date: Feb 19 2008 13:04:08                                                       
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0                                             
New Stack = FFD00000 Size:0x8000                                
PSD_INIT ESP=0xFFCFFFE0                       
AcpiOsInitialize ALLOC size 65536 at 0xF9060000                                               
AcpiOsInitialize MapMem size 4096 at 0xFFE9E000                                               
AcpiOsCreateLock 8                  
AcpiOsCreateLock 0                  
AcpiOsPredefinedOverride: "_REV"                                
AcpiOsPredefinedOverride: "_OS_"                                
AcpiOsPredefinedOverride: override to eComStation                                                 
AcpiOsPredefinedOverride: "_                           
AcpiOsCreateSemaphore: O.K. Handle=0xF90603F8 M:1 I:0                                                     
AcpiOsPredefinedOverride: "_OSI"                                
AcpiOsPredefinedOverride: override to eCS                                         
*** AcpiInitializeSubsystem Status = 0 ***                                          
AcpiOsMapMemory new ret lin:FFE8840E phys:40E                                             
AcpiOsMapMemory new ret lin:FFE88000 phys:9F000                                               
AcpiOsMapMemory new ret lin:F9040000 phys:E0000                                               
AcpiOsMapMemory new ret lin:FFE881E0 phys:F81E0                                               
ACPI: RSDP @ 0xF81E0/0x24 (v2 ATI   )                                     
AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100                                                  
ACPI: XSDT @ 0x7FEE3100/0x4C (v1 ATI    ASUSACPI 0x42302E31 AWRD 0                                                                 
AcpiOsMapMemory new ret lin:FFE88100 phys:7FEE3100



PSD_install options:" /O1" @#netlabs dot org:3
AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440                                                  
ACPI: FACP @ 0x7FEE8440/0xF4 (v3 ATI    ASUSACPI 0x42302E31 AWRD 0x0)                                            
MPDATA:FF800000 ESP:FF80
AcpiOsMapMemory new ret lin:FFE88440 phys:7FEE8440               
New Stack = FFD00000 Size:0x8000  
AcpiOsMapMemory new ret lin:FFE88280 phys:7FEE3280FE0                       
AcpiOsInitialize ALLOC 
ACPI: DSDT @ 0x7FEE3280/0x515D (v1 ATI    ASUSACPI 0x1000 MSFT 0x3000000)piOsInitialize MapMem size 4096 at 0xFFE9E000                            
AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000     
AcpiOsCreateLock 0                  
AcpiOsP
ACPI: FACS @ 0x7FEE0000/0x40                            
AcpiOsMapMemory new ret lin:FFE88680 phys:7FEE8680              
AcpiOsPredefinedOverride: override 
ACPI: SSDT @ 0x7FEE8680/0x544 (v1 PTLT                        
           
Table [DSDT]            
Table [FACS]  
AcpiOsMap
Table [FACP]t lin:FFE884
Table [SSDT]440         
Table [HPET]            
Table [MCFG]   
ACPI: FA
Table [APIC]40/0xF4 (v3 
Local APIC address: FEE00000hD 0x0)                       
System also has 8259                    
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usableEE8440                                           
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable7FEE3280                                         
APIC_PROCESSOR: ProcID 2h LocalApicID 2h - usable  ASUSACPI 0x1000 MSFT 0x3000000)                
APIC_PROCESSOR: ProcID 3h LocalApicID 3h - usable       
AcpiOsMapMemory new ret lin:FFE88000 phys
APIC_IO: IO ApicID 4h addr FEC00000h INTI 0               
ACPI: FACS @ 0x7FEE0000/0x4
ACPI: HPET @ 0x7FEE8C40/0x38 (v1 ATI 
rigger by: Level02E31 AWRD 0x98)
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: EdgepiOsMapMemory new ret lin:FFE88CC0 phys:7FEE8CC0                        
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: EdgePI 0x42302E31 AWRD 0x0)                                                 
APIC_LOCAL_NMI: ProcID 2h LINT1 - Polarity active: High Trigger by: Edge                                                
ACPI: APIC @ 0x7FEE8580
APIC_LOCAL_NMI: ProcID 3h LINT1 - Polarity active: High Trigger by: Edge                                          
*** AcpiInitializeTables Stat
Size of FACDT 244                 
*** AcpiLoadTables Status 
The value to write to SMI_CMD to re-enable SMI 0xA0]            
Table [FACS]            
Table [FACP]
The value to write to SMI_CMD to enter the S4BIOS state 0xA4 
Table [MCFG]            
Table [APIC]            
Local AP
System port address of the PM1a Event Register Block 4000also has 8259                    
APIC_PROCESSOR: ProcID 
System port address of the PM1b Event Register Block 0                    
APIC_PROCESSOR: ProcID 1h LocalAp
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4          
APIC_PROCESSOR: ProcID 2h LocalApicID 2h - 
System port address of the PM1a Control Register      
                                       
Offset within the ACPI general-purpose event model where GPE1 based events start244                 
Type of computer - Desktop                          
System
 0ct
GPE enable register: 0: 0: 0: 0 in 8259 mode. 9               
GPE status register: 0: 1: 0: 40           
System port address 
The system does not support a C2 state. 65                                 
The valu
The system does not support a C3 state 3E9                                          
The zero-based index of where the processor's duty cycle setting is within the p                               
The value to write to SMI_CMD to enter the S4BIO
rocessor's P_CNT register 1                           
The RTC CMOS RAM index to the day-of-month alarm value 13gister Block 4000                                        
IA-PC Boot Architecture Flags 0x0ess of the PM1b Event Register Bl
Fixed feature flags 1AD                       
The reset register                 
Address 100           
The value to write to the RESET_REG port to reset the system FERegister Block 0                                               
***** Throttl Width 0 Offset 1ed by PM1a_CNT_BLK (PM1_CNT_LE
evxfevnt-176 [2] Enable: Transition to ACPI mode successfulSystem port address of the PM2 Control Register Block 4050 
evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 decoded by PM2_CNT_BLK 1                                        
System
AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAEDRegister Block 4008                                
AcpiOsMapMemory new ret lin:FFE88000 phys:7FEE0000r of bytes decoded by PM_TMR_BLK (=4) 4           
evgpeblk-1211 [3] EvInitializeGpeBlock: Found 6 Wake, Enabled 0 Runtime GPEs in Register Block 402                                                            
AcpiOsMapMemory new ret lin:FFE87FEA phys:FFFEAPE0_BLK 0x8                                    
************ Scan EC Status = 0PE1_BLK 0x0                    
Completing Region/Field/Buffer/Package initialization:.......................... based events start                                                             
.................ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_N      
GPE status register: 0: 1: 0: 40                                
The syst
OT_FOUNDot suppo
ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDes not support a C3 state 3E9                                          

ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDn the p                                                                 
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NO    
The RTC CMOS RAM index to the                             
Register Bit Offset 0       
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDe to write to the RESET_REG port to reset the system FE                 
ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDet 1                              
evxfevnt-176 [2] Enable: Transition t
...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND      
evgpeblk-1111 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on in
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND    
AcpiOsInstallIntterrupHandler IRQ9 handler F90DEAED                
ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDphys:7FEE0000                                                  
        
ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND                                                                        
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUNDND                                                                      
...ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND                                                                        
ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUND                                                                        
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND                                                                        
ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUNDND                                                                      
...ACPI Error (dsobject-208): [LNKA] Namespace lookup failure, AE_NOT_FOUNDND                                                                        
ACPI Error (dsobject-208): [LNKB] Namespace lookup failure, AE_NOT_FOUND                                                                        
ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT_FOUND                                                                        
ACPI Error (dsobject-208): [LNKD] Namespace lookup failure, AE_NOT_FOUNDND                                                                      
....................................................ACPI Error (dsobject-208): [\                                                                    
ACPI Error 
_PR_.CPU0] Namespace lookup failure, AE_NOT_FOUNDE_NOT_FOUND                                      
Executing subtree for Buffer/Package/Regionr (dsobject-208): [LNKA] Namespace lookup f
ACPI Exception (nsinit-425): AE_NOT_FOUND, Could not execute arguments for [_PSL           
...ACPI Error (dsobject-208): [LNKC] Namespace lookup failure, AE_NOT
] (Package) [20080123]                      
...................                

ACPI Error (dsobjec
Executed 3 _INI methods requiring 1 _STA executions (examined 68 objects)                                                   
...ACPI Error (dsobjec
************ AcpiInitializeObjects mask:0 Status = 0                                                    
Processor [C000]     
ACPI Error
Processor [C001][LNKA] Namespace
Processor [C002]AE_NOT_FOUND    
Processor [C003]                
Status 0x0 0            
************ AcpiInstallNotifyHandler System Status = 0ookup failure, AE_NOT_FOUND                            
************ AcpiInstallNotifyHandler Device Status = 0(dsobject-208): [LNKC] Namespace lookup failure, AE_NOT

Init ACPI rc=0              
AcpiOsMapMemory new ret lin                    
    
ACPI Error (dsobject-208)
WakeupVector Lin: FFE84000 Phys: 63000 IPIStack:FFDEC000 s_cpu:0                                                      
..........
GetWakeupVector Status = 0...............ACPI Error 
PIC Mask:FFFFDFFB                 
PSD_GET_NUM_OF_PROCS - has 4 CPU                              
_
ProcInit CPU0space lookup 
LApic ID:0x0: ver 0x80050010                            
Max LVT=6   
Execu
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND                                  
ACPI Except
Status Evaluate Processor 0x0 AE_OK                                   
CPU0 Status Evaluate _PCT 0x0 AE_OK                                   
 Perf control:  0xC0010062tializing Device/Processor
 Perf status:  0x0 executing _INI me
End init CPU0 rc:0                  
StartProcessor: CPU1 id 1                     
Exe
AcpiOsMapMemory new ret lin:FFDF1000 phys:0ions (examined 68 objects)                 
StartProcessor: Warm Vector:18000004, BootCode.Lin:0xFFE84000, BootCode.Phys:0x6izeObjects mask:0 Status = 0                                                    
3000esso
StartProcessor 1 id:1 LAPICid:1or [C001]                
Proce
Wait INI App Proc         
Process
Send SIPI1          
StartProcessor success SIPI1
************ AcpiInstallNot
ProcInit CPU1tem Status = 
LApic ID:0x1000000: ver 0x80050010                     
************
Max LVT=6llNotifyH
Set HLT duration as IOdelay:                           
 ProcId:     0x100000 lin: FFE85
 P_BLK:      0x40101) Ver 21 MaxIO ent
 P_BLK len:  0x6                
CPU1 Status Evaluate _PCT 0x0 AE_OK                      
 Arbitration
 Perf control:  0xC0010062  (4000000) 4             
 Perf status:  0x0                  
End init CPU1 rc:0m IRQ0            
StartProcessor: CPU2 id 2n: FFE84000              
StartProcessor 2 id:2 LAPICid:2FE84000 Phys: 63000 IPIStack:FF
Wait INI App Proc                 
Send SIPI1          
StartProcessor success SIPI1eupVector Status = 0        
ProcInit CPU2    
PIC Mask
LApic ID:0x2000000: ver 0x80050010 CPU0             
UNMASK PIC IRQ8
Max LVT=6FFDEFB Re
Set HLT duration as IOdelay:0x11C                      
PSDFree: a
Status Evaluate Processor PDC 0x5 AE_NOT_          
                             
 P_BLK len:  0x6ge 0->1         
CPU2 Status Evaluate _PCT 0x0 AE_OKClass:604  Hdr:1   Bridge 0->2     
 Perf status:  0x0
End init CPU2 rc:0
StartProcessor: CPU3 id 3
StartProcessor 3 id:3 LAPICid:3
Wait INI App Proc
Send SIPI1
StartProcessor success SIPI1
ProcInit CPU3
LApic ID:0x3000000: ver 0x80050010
Max LVT=6
End Startup code
Set HLT duration as IOdelay:0x11C
Status Evaluate Processor PDC 0x5 AE_NOT_FOUND
Status Evaluate Processor 0x0 AE_OK
Usable:4 Counter:3
 CPU id to N:3
 ProcId:     0x3
 P_BLK:      0x4010
 P_BLK len:  0x6
CPU3 Status Evaluate _PCT 0x0 AE_OK
 Perf control:  0xC0010062
 Perf status:  0x0
End init CPU3 rc:0

