AllocIRQMem at 0xFFE89000 (24576 bytes)
@#netlabs dot org:3.5#@ACPI core PSD Driver. (c) netlabs.org 2005-2007 Build date: Dec 29 2007 11:08:14
MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0
New Stack = FFD00000 Size:0x8000
AcpiOsInitialize ALLOC size 65536 at 0xF96C0000
AcpiOsInitialize MapMem size 4096 at 0xFFE9E000
AcpiOsCreateLock 8
AcpiOsCreateLock 8
AcpiOsPredefinedOverride: "_REV"
AcpiOsPredefinedOverride: "_OS_"
AcpiOsPredefinedOverride: override to eComStation
AcpiOsPredefinedOverride: "_GL_"
AcpiOsCreateSemaphore: O.K. Handle=0xF96C03F8 M:1 I:0
AcpiOsPredefinedOverride: "_OSI"
AcpiOsPredefinedOverride: override to eCS
*** AcpiInitializeSubsystem Status = 0 ***
ACPI: RSDP @ 0xF6D20/0x24 (v2 Nvidia)
ACPI: XSDT @ 0x3DEF30C0/0x4C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: FACP @ 0x3DEFA300/0xF4 (v3 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: DSDT @ 0x3DEF3240/0x7055 (v1 _ASUS_ Notebook 0x1000 MSFT 0x3000000)
ACPI: FACS @ 0x3DEF0000/0x40
ACPI: SLIC @ 0x3DEFA500/0x176 (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: SSDT @ 0x3DEFA6C0/0x1C4 (v1 _ASUS_ Notebook 0x1  LTP 0x1)
ACPI: MCFG @ 0x3DEFA980/0x3C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
ACPI: APIC @ 0x3DEFA440/0x7C (v1 _ASUS_ Notebook 0x42302E31 AWRD 0x0)
*** AcpiInitializeTables Status = 0 ***
AcpiOsTableOverride Ex:FFCDB240 New:FFCFFFC4 SIG:[DSDT]
*** AcpiLoadTables Status = 0 ***
Table [DSDT]
Table [FACS]
Table [FACP]
Table [SLIC]
Table [SSDT]
Table [MCFG]
Table [APIC]
Local APIC address: FEE00000h
System also has 8259
APIC_PROCESSOR: ProcID 0h LocalApicID 0h - usable
APIC_PROCESSOR: ProcID 1h LocalApicID 1h - usable
APIC_IO: IO ApicID 2h addr FEC00000h INTI 0
APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 0 - Polarity active: Bus spec Trigger by: Bus spec
APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level
APIC_XRUPT_OVERRIDE: Bus: 0h Source 14 Global SysInt 14 - Polarity active: High 0 Trigger by: Edge
APIC_XRUPT_OVERRIDE: Bus: 0h Source 15 Global SysInt 15 - Polarity active: High 0 Trigger by: Edge
APIC_LOCAL_NMI: ProcID 0h LINT1 - Polarity active: High Trigger by: Edge
APIC_LOCAL_NMI: ProcID 1h LINT1 - Polarity active: High Trigger by: Edge
Size of FACDT 244
Type of computer - Desktop
System vector the SCI interrupt is wired to in 8259 mode. 9
System port address of the SMI Command Port 0x442E
The value to write to SMI_CMD to disable SMI   0xA1
The value to write to SMI_CMD to re-enable SMI 0xA0
The value to write to SMI_CMD to enter the S4BIOS state 0x0
System port address of the PM1a Event Register Block 4000
System port address of the PM1b Event Register Block 0
Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4
System port address of the PM1a Control Register Block 4004
System port address of the PM1b Control Register Block 0
Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2
System port address of the PM2 Control Register Block 401C
Number of bytes decoded by PM2_CNT_BLK 1
System port address of the Power Management Timer Control Register Block 4008
Number of bytes decoded by PM_TMR_BLK (=4) 4
System port address of General-Purpose Event 0 Register Block 4020
System port address of General-Purpose Event 1 Register Block 44A0
Number of bytes decoded by GPE0_BLK 0x8
Number of bytes decoded by GPE1_BLK 0x10
Offset within the ACPI general-purpose event model where GPE1 based events start 20
GPE enable register: 0: 0: 0: 0
GPE status register: 40: 0: 0: 0
The system does not support a C2 state. 65
The system does not support a C3 state 3E9
The zero-based index of where the processor's duty cycle setting is within the processor's P_CNT register 1
The bit width of the processor's duty cycle setting value in the P_CNT register 3
The RTC CMOS RAM index to the day-of-month alarm value 125
The RTC CMOS RAM index to the month of year alarm value 126
The RTC CMOS RAM index to the century of data value (hundred and thousand year decimals) 50
IA-PC Boot Architecture Flags 0x0
Fixed feature flags 4A5
The reset register:
Type of address space - System I/O
Register Bit Width  8
Register Bit Offset 0
Access size 0
Address 3321
The value to write to the RESET_REG port to reset the system 6
***** Throttl Width 3 Offset 1
AcpiOsInstallIntterrupHandler IRQ9 handler F9700FA9
************ AcpiEnableSubsystem Status = 0
AcpiOsDerivePCIID([PCI0] ,[PIRQ],) Bus:0 Dev:10 Fun:0 - Derive: Bus:0 Dev:10 Fun:0
************ Scan EC Status = 0
AcpiOsDerivePCIID([PCI0] ,[SMCA],) Bus:0 Dev:10 Fun:1 - Derive: Bus:0 Dev:10 Fun:1
************ AcpiInitializeObjects mask:0 Status = 0
Processor [CPU0]
Processor [CPU1]
Status 0x0 0
************ AcpiInstallNotifyHandler System Status = 0
************ AcpiInstallNotifyHandler Device Status = 0
PSDFree: at 0xF96D0000 success!
Finding:0 bridges
0:0.0  Class:500  Hdr:80
0:0.1  Class:500  Hdr:80
0:0.2  Class:500  Hdr:80
0:0.3  Class:500  Hdr:80
0:0.4  Class:500  Hdr:0
0:0.5  Class:500  Hdr:80
0:0.6  Class:500  Hdr:80
0:0.7  Class:500  Hdr:80
0:5.0  Class:300  Hdr:0
0:9.0  Class:500  Hdr:0
0:10.0  Class:601  Hdr:80
0:10.1  Class:C05  Hdr:80
0:10.2  Class:500  Hdr:80
0:11.0  Class:C03  Hdr:80
0:11.1  Class:C03  Hdr:80
0:13.0  Class:101  Hdr:0
0:14.0  Class:101  Hdr:0
0:16.0  Class:604  Hdr:81   Bridge 0->1..2
0:20.0  Class:680  Hdr:0
0:24.0  Class:600  Hdr:80   Bridge H->0
0:24.1  Class:600  Hdr:80   Bridge H->0
0:24.2  Class:600  Hdr:80   Bridge H->0
0:24.3  Class:600  Hdr:80   Bridge H->0
1:9.0  Class:280  Hdr:0
1:14.0  Class:604  Hdr:1   Bridge 1->2
2:4.0  Class:200  Hdr:0
2:5.0  Class:200  Hdr:0
PCI Bus scan: 3 PCI buses found.
Scan ACPI tree for PCI functions
AcpiOsDerivePCIID([PCI0] ,[K181],) Bus:0 Dev:24 Fun:1 - Derive: Bus:0 Dev:24 Fun:1
0:0.0  'PCI0' (F96C4AC8)
0:16.0  'HUB0' (F96C5050)
0:14.0  'SAT1' (F96C51D8)
0:15.0  'SAT2' (F96C5798)
0:13.0  'IDE0' (F96C5C58)
0:24.0  'K800' (F96C66E0)
0:24.1  'K801' (F96C6758)
0:24.2  'K802' (F96C7660)
0:25.0  'K810' (F96C76D8)
0:25.1  'K811' (F96C7750)
0:25.2  'K812' (F96C8260)
0:26.0  'K820' (F96C82D8)
0:26.1  'K821' (F96C8350)
0:26.2  'K822' (F96C8E60)
0:27.0  'K830' (F96C8ED8)
0:27.1  'K831' (F96C8F50)
0:27.2  'K832' (F96C9A60)
0:5.0  'IGPU' (F96C9AD8)
0:10.1  'SMB0' (F96C9C10)
0:10.0  'VT86' (F96C9FB0)
0:11.0  'USB0' (F96CDDE0)
0:11.1  'USB2' (F96CDF18)
0:16.1  'AZAD' (F96CE170)
0:20.0  'MMAC' (F96CE1E8)
Bridges found:
0:0.0  class:600  type: 0  Bus H->0  ACPI: 'PCI0' (F96C4AC8) _PRT
0:16.0  class:604  type: 1  Bus 0->1  ACPI: 'HUB0' (F96C5050) _PRT
1:14.0  class:604  type: 1  Bus 1->2
IRQLinks found:
0: 'LSMB' (F96B1280)  P[ 5,*7, 9, 10, 11, 14, 15] <- 0:10.1
                       A[]
1: 'LPMU' (F96B0DD0)  P[]
                       A[]
2: 'LUBA' (F96B0218)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:11.0
                       A[]
3: 'LUB2' (F96B14D8)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:11.1
                       A[]
4: 'LMAC' (F96B06C8)  P[ 5, 7, 9, 10,*11, 14, 15] <- 0:20.0
                       A[]
5: 'LACI' (F96B0920)  P[]
                       A[]
6: 'LAZA' (F96B0B78)  P[]
                       A[]
7: 'LMCI' (F96B1028)  P[]
                       A[]
8: 'LIDE' (F96B1730)  P[]
                       A[]
9: 'LSID' (F96B1988)  P[ 5, 7, 9,*10, 11, 14, 15] <- 0:14.0
                       A[]
10: 'LFID' (F96B1BE0)  P[]
                       A[]
11: 'LNK7' (F96CFD50)  P[ 5,*7, 9, 10, 11, 14, 15] <- 0:5.0
                       A[]
12: 'LNK8' (F96CFFA8)  P[]
                       A[]
13: 'LNK5' (F96CF8A0)  P[]
                       A[]
14: 'LNK6' (F96CFAF8)  P[]
                       A[]
15: 'APCS' (F96B42A0)  P[]
                       A[#20, 21, 22, 23] <- 0:10.1
16: 'APMU' (F96B3B98)  P[]
                       A[]
17: 'APCF' (F96B3238)  P[]
                       A[ 20,#21, 22, 23] <- 0:11.0
18: 'APCL' (F96B44F8)  P[]
                       A[ 20, 21,#22, 23] <- 0:11.1
19: 'APCH' (F96B36E8)  P[]
                       A[#20, 21, 22, 23] <- 0:20.0
20: 'APCJ' (F96B3940)  P[]
                       A[]
21: 'AAZA' (F96B3DF0)  P[]
                       A[]
22: 'APCK' (F96B4048)  P[]
                       A[]
23: 'APCZ' (F96B49A8)  P[]
                       A[]
24: 'APSI' (F96B4C00)  P[]
                       A[ 20, 21, 22,#23] <- 0:14.0
25: 'APSJ' (F96B4E58)  P[]
                       A[]
26: 'APC7' (F96B2D88)  P[]
                       A[#16] <- 0:5.0
27: 'APC8' (F96B2FE0)  P[]
                       A[]
28: 'APC5' (F96B28D8)  P[]
                       A[]
29: 'APC6' (F96B2B30)  P[]
                       A[]
30: 'LNK1' (F96CEF40)  P[*5, 7, 9, 10, 11, 14, 15] <- 2:5.0 1:9.0
                       A[]
31: 'LNK2' (F96CF198)  P[ 5, 7, 9,*10, 11, 14, 15] <- 2:4.0
                       A[]
32: 'LNK3' (F96CF3F0)  P[]
                       A[]
33: 'LNK4' (F96CF648)  P[]
                       A[]
34: 'APC1' (F96B1F78)  P[]
                       A[#16] <- 2:5.0 1:9.0
35: 'APC2' (F96B21D0)  P[]
                       A[#17] <- 2:4.0
36: 'APC3' (F96B2428)  P[]
                       A[]
37: 'APC4' (F96B2680)  P[]
                       A[]
PCI devices found:
0:0.0  10DE:2F0  'PCI0'
0:0.1  10DE:2FA        
0:0.2  10DE:2FE        
0:0.3  10DE:2F8        
0:0.4  10DE:2F9        
0:0.5  10DE:2FF        
0:0.6  10DE:27F        
0:0.7  10DE:27E        
0:5.0  10DE:240  'IGPU'  IRQs: PCI:7 PIC:'LNK7':7 APIC:'APC7':16 MSI
0:9.0  10DE:270        
0:10.0  10DE:260  'VT86'
0:10.1  10DE:264  'SMB0'  IRQs: PCI:7 PIC:'LSMB':7 APIC:'APCS':20
0:10.2  10DE:272        
0:11.0  10DE:26D  'USB0'  IRQs: PCI:10 PIC:'LUBA':10 APIC:'APCF':21
0:11.1  10DE:26E  'USB2'  IRQs: PCI:10 PIC:'LUB2':10 APIC:'APCL':22
0:13.0  10DE:265  'IDE0'
0:14.0  10DE:266  'SAT1'  IRQs: PCI:10 PIC:'LSID':10 APIC:'APSI':23 MSI
0:16.0  10DE:26F  'HUB0'
0:20.0  10DE:269  'MMAC'  IRQs: PCI:11 PIC:'LMAC':11 APIC:'APCH':20
0:24.0  1022:1100  'K800'
0:24.1  1022:1101  'K801'
0:24.2  1022:1102  'K802'
0:24.3  1022:1103        
1:9.0  1133:E001          IRQs: PCI:5 PIC:'LNK1':5 APIC:'APC1':16
1:14.0  1011:24        
2:4.0  8086:1229          IRQs: PCI:10 PIC:'LNK2':10 APIC:'APC2':17
2:5.0  8086:1229          IRQs: PCI:5 PIC:'LNK1':5 APIC:'APC1':16
Bus detected - 2
************ AcpiInstall Power Device Status = 0
ACPI Error (evxfevnt-288): Could not enable SleepButton event [20070320]
ACPI Warning (evxface-235): Could not enable fixed event 3 [20070320]
************ AcpiInstall Sleep Device Status = 25 - AE_NO_HARDWARE_RESPONSE
************ AcpiInstall PMTimer Device Status = 0
** Total use:186384 unuse:7640 count:3511 **
Get GpeHdl Status = 0 - AE_OK
Event [_L11]
Install GPE0x11  Status 0x0
Event [_L00]
Install GPE0x0  Status 0x0
Event [_L03]
Install GPE0x3  Status 0x0
Event [_L0B]
Install GPE0xB  Status 0x0
Event [_L0D]
Install GPE0xD  Status 0x0
Event [_L05]
Install GPE0x5  Status 0x0
Event [_L10]
Install GPE0x10  Status 0x0
Event [_L15]
Install GPE0x15  Status 0x0
EndScan GPE Status 0
===== Info ========
Int Level 9
In Xrupt F96A24E8 in arg F96A24E8
      Node
Name [_GPE]
Flags: 0
Reg count 4
GPE0x0 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x3 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x5 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0 Status:4020 Enable:4024 EnableWake:29 EnableRun:0 BaseGPENumber:0
GPE0xB Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0xD Flag:0x2 Status - Set 0x0 Enable 0x0
GPE1 Status:4021 Enable:4025 EnableWake:28 EnableRun:0 BaseGPENumber:8
GPE0x10 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE0x11 Flag:0x4 Status - Set 0x0 Enable 0x0
GPE0x15 Flag:0x2 Status - Set 0x0 Enable 0x0
GPE2 Status:4022 Enable:4026 EnableWake:21 EnableRun:2 BaseGPENumber:10
GPE3 Status:4023 Enable:4027 EnableWake:0 EnableRun:0 BaseGPENumber:18
===== Info ========
Int Level 9
In Xrupt F96A24E8 in arg F96A2758
      Node
Name [_GPE]
Flags: 0
Reg count 8
GPE0 Status:44A0 Enable:44A8 EnableWake:0 EnableRun:0 BaseGPENumber:20
GPE1 Status:44A1 Enable:44A9 EnableWake:0 EnableRun:0 BaseGPENumber:28
GPE2 Status:44A2 Enable:44AA EnableWake:0 EnableRun:0 BaseGPENumber:30
GPE3 Status:44A3 Enable:44AB EnableWake:0 EnableRun:0 BaseGPENumber:38
GPE4 Status:44A4 Enable:44AC EnableWake:0 EnableRun:0 BaseGPENumber:40
GPE5 Status:44A5 Enable:44AD EnableWake:0 EnableRun:0 BaseGPENumber:48
GPE6 Status:44A6 Enable:44AE EnableWake:0 EnableRun:0 BaseGPENumber:50
GPE7 Status:44A7 Enable:44AF EnableWake:0 EnableRun:0 BaseGPENumber:58
=========== Status 0x0 0
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [PWRB] Value:2
AcpiOsExecute type:1
AcpiOsExecute - direct executing
*** System Notify ***
Dev: [USB0] Value:0
AcpiOsDerivePCIID([PCI0] ,[SMCF],) Bus:0 Dev:10 Fun:1 - Derive: Bus:0 Dev:10 Fun:1
************ Leave Sleep Status = 0x0 - AE_OK
APM: PSD find success. PSD Ftable:F9C001D0
Register Notify 1st FFCF51CE 
FindPCIDevice
 Need: B:0 D:D F:0
FindPCIDevice
 Need: B:0 D:E F:0
Finding APIC23 PIC10 Dev: [SAT1]
Gradd: PSD find success. PSD Ftable:F9C001D0
******** Event tread ***************
APM: Setting suspend state:1
AcpiExecSMPFunction: Unicall
AcpiExecSMPFunction: End
