id summary reporter owner description type status priority milestone component version resolution keywords cc 167 Dell PowerEdge SC440, Intel Xeon 3060 Yuri Dario pasha "System freeze at os2 logo. Attached a serial cable, this is the dump using the retail SMP kernel. {{{ PSD_install options:"" /O1 /!NOD"" @#netlabs dot org:3.5#@ACPI core PSD Driver. (c ) netlabs.org 2005-2007 Build date: Nov 25 2007 01:57:22 MPDATA:FF800000 ESP:FF800A70 Sel:1520 UsCPU:0 New Stack = FFD00000 Size:0x8000 PSD_INIT ESP=0xFFCFFFE0 AcpiOsInitialize ALLOC size 65536 at 0xF9680000 AcpiOsInitialize MapMem size 4096 at 0xFFE9E000 AcpiOsCreateLock 8 AcpiOsCreateLock 0 AcpiOsPredefinedOverr AcpiOsPredefinedOverride: ""_OS_"" AcpiOsPredefinedOverride: override to eComStation AcpiOsPredefinedOverride: ""_GL_"" AcpiOsCreateSemaphore: O.K. Handle=0xF96803F8 M:1 I:0 AcpiOsPredefinedOverride: ""_OSI"" AcpiOsPredefinedOverride: override to eCS *** AcpiInitializeSubsystem Status = 0 *** ACPI: RSDP @ 0xFEBF0/0x24 (v2 DELL ) ACPI: XSDT @ 0xFD1F2/0x74 (v1 DELL B8K 0x14 ASL 0x61) ACPI: FACP @ 0xFD30A/0xF4 (v3 DELL B8K 0x14 ASL 0x61) ACPI: DSDT @ 0xFFFCF763/0x2D58 (v1 DELL dt_ex 0x1000 INTL 0x20050624) ACPI: FACS @ 0x7FE7CC00/0x40 ACPI: SSDT @ 0xFFFD2688/0x88 (v1 DELL st_ex 0x1000 INTL 0x20050624) ACPI: APIC @ 0xFD3FE/0x92 (v1 DELL B8K 0x14 ASL 0x61) ACPI: BOOT @ 0xFD490/0x28 (v1 DELL B8K 0x14 ASL 0x61) ACPI: ASF! @ 0xFD4B8/0x67 (v16 DELL B8K 0x14 ASL 0x61) ACPI: MCFG @ 0xFD51F/0x3E (v1 DELL B8K 0x14 ASL 0x61) ACPI: HPET @ 0xFD55D/0x38 (v1 DELL B8K 0x14 ASL 0x61) ACPI: SSDT @ 0x7FE7CC40/0x1F9 (v1 DpgPmm Cpu0Ist 0x11 INTL 0x20050624) ACPI: SSDT @ 0x7FE7D049/0x1F9 (v1 DpgPmm C ACPI: SSDT @ 0x7FE7D452/0x140 (v1 DpgPmm CpuPm 0x10 INTL 0x20050624) *** AcpiInitializeTables Status = 0 *** AcpiOsTableOverride Ex:FFE84763 New:FFCFFFAC SIG:[DSDT] tbxface-619 [2] TbLoadNamespace: ACPI Tables successfully acquired *** AcpiLoadTables Status = 0 *** Table [DSDT] Table [FACS] Table [FACP] Table [SSDT] Table [APIC] Local APIC address: FEE00000h System also has 8259 APIC_PROCESSOR: ProcID 1h LocalApicID 0h - usable APIC_PROCESSOR: ProcID 2h LocalApicID 1h - usable APIC_PROCESSOR: ProcID 3h LocalApicID APIC_PROCESSOR: ProcID 4h LocalApicID 7h - not usable APIC_PROCESSOR: ProcID 5h LocalApicID 0h - not usable APIC_PROCESSOR: ProcID 6h LocalApicID 1h - not usable APIC_PROCESSOR: ProcID 7h LocalApicID 2h - not usable APIC_PROCESSOR: ProcID 8h LocalApicID 3h - not usable APIC_IO: IO ApicID 8h addr FEC00000h INTI 0 APIC_XRUPT_OVERRIDE: Bus: 0h Source 0 Global SysInt 2 - Polarity active: Bus spe c Trigger by: Bus spec APIC_XRUPT_OVERRIDE: Bus: 0h Source 9 Global SysInt 9 - Polarity active: High 0 Trigger by: Level APIC_LOCAL_NMI: ProcID FFh LINT1 - Polarity active: High Trigger by: Level Table [BOOT] Table [ASF!] Table [MCFG] Table [HPET] Table [SSDT] Table [SSDT] Table [SSDT] Size of FACDT 244 Type of computer - SOHO Server System vector the SCI interrupt is wired to in 8259 mode. 9 System port address of the SMI Command Port 0xB2 The value to write to SMI_CMD to disable SMI 0x70 The value to write to SMI_CMD to re-enable SMI 0x71 The value to write to SMI_CMD to enter the S4BIOS state 0x0 System port address of the PM1a System port address of the PM1b Event Register Block 0 Number of bytes decoded by PM1a_EVT_BLK(PM1_EVT_LEN) 4 System port address of the PM1a Control Register Block 804 System port address of the PM1b Control Register Block 0 Number of bytes decoded by PM1a_CNT_BLK (PM1_CNT_LEN) 2 System port address of the PM2 Control Register Block 0 System port address of the Power Management Timer Control Register Block 808 Number of bytes decoded by PM_TMR_BLK (=4) 4 System port address of General-Purpose Event 0 Register System port address of General-Purpose Event 1 Register Block 0 Number of bytes decoded by GPE0_BLK 0x8 Number of bytes decoded by GPE1_BLK 0x0 Offset within the ACPI general-purpose event model where GPE1 based events start 0 GPE enable register: 0: 0: 0: 0 GPE status register: 0: 0: 38: DE The system does not support a C2 state. 1F4 The system does not support a C3 state 1388 The zero-based index of where the processor's duty cycle setting is within the p rocessor's P_CNT register 0 IA-PC Boot Architecture Fla Fixed feature flags A5 The reset register: Type of address space - System Memory Register Bit Width 0 Register Bit Offset 0 Access size 0 Address 0 The value to write to the RESET_REG port to reset the system 0 ***** Throttl Width 0 Offset 0 evxfevnt-176 [2] Enable: Transition to ACPI mode successful evgpeblk-1105 [4] EvCreateGpeBlock: GPE 0 to 1F [_GPE] 4 regs on int 0x9 AcpiOsInstallIntterrupHandler IRQ9 handler F96DDC8D evgpeblk-1205 [3] EvInitializeGpeBlock: Found 12 Wake, Enabled 1 Runtime GPEs in this block ************ AcpiEnableSubsystem Status = 0 AcpiOsDerivePCIID([PCI0] ,[P40C],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun :0 AcpiOsDerivePCIID([PCI0] ,[P41C],) Bus:0 Dev:31 Fun:0 - Derive: Bus:0 Dev:31 Fun :0 ************ Scan EC Status = 0 Completing Region/Field/Buffer/Package initialization:.......................... ........................... Initialized 22/26 Regions 0/0 Fields 8/8 Buffers 23/36 Packages (435 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: }}} " defect closed major ACPI PSD 3.05 wontfix