Timeline
Apr 4, 2012:
- 10:06 PM Changeset [476] by
- make sure that if used for setting operational registers, these are …
- 10:05 PM Changeset [475] by
- fix typo
- 10:05 PM Changeset [474] by
- for INIT,INIT_COMPLETE,SHUTDOWN, use tight delay loops even for …
- 3:43 PM Ticket #20 (System has only USB 2.0, but USB keyboard, mouse have problems) created by
- This is an ASRock H55M-LE, and has USB 2.0 only. There are two …
- 3:24 AM Changeset [473] by
- add some timing delays for mandatory minimum reset time and so that …
- 3:19 AM Changeset [472] by
- if /FS flag set on OS shutdown, after putting HC into suspend, wait …
- 3:17 AM Changeset [471] by
- back out a change: for low speed and full speed devices we DO NOT have …
- 3:15 AM Changeset [470] by
- if /FS flag set on OS shutdown, put HC into suspend instead of putting …
- 3:12 AM Changeset [469] by
- if /FS flag set on OS shutdown, put HC into suspend instead of putting …
- 3:10 AM Changeset [468] by
- allow suspend/resume processing also for USBMSD, remove all related stuff
Apr 3, 2012:
- 10:33 AM Ticket #13 (Just 4 usbuhcd.sys entries) closed by
- wontfix
- 10:32 AM Ticket #8 (eCS 2.1 boot hangs at USBEHCD or USBD) closed by
- wontfix
- 10:32 AM Ticket #4 (usbehcd init complete delay) closed by
- wontfix
- 10:31 AM Ticket #12 (key card not viewed by USB drives or LVM?) closed by
- wontfix
Mar 30, 2012:
- 3:00 AM Changeset [467] by
- removed routines "SetFMInterval" and "SetPeriodicStart" as they would …
- 1:01 AM Changeset [466] by
- on reset, as first action, halt the HC (to be in line with …
- 12:55 AM Changeset [465] by
- poll all ports for resetting of OWNER flag on setting global CONFIG …
Mar 24, 2012:
- 5:33 PM Ticket #19 (Placing USBEHCD after USBUHCD in CONFIG.SYS hangs at boot) created by
- Hardware: ThinkPad T43 USB drivers & PC Card drivers …
Mar 22, 2012:
- 9:21 PM Changeset [464] by
- remove unused parameter
- 9:20 PM Changeset [463] by
- update makefiles and build scripts
- 8:44 AM Changeset [462] by
- backout SET/CLEAR Feature sync between Companion and Master …
- 8:21 AM Changeset [461] by
- USB(x)HCD: on end of reset, make sure that device interrupts are …
Mar 20, 2012:
- 5:27 AM Ticket #18 (Regression - with v10.182 USB worked - with v10.183 USB do not work) created by
- With v10.183 USB devices plugged in at boot work will work. If USB …
Mar 18, 2012:
- 8:51 AM Changeset [460] by
- backout
- 4:10 AM Changeset [459] by
- backout
- 3:53 AM Changeset [458] by
- for one reason or the other I now need to also link in the slibcep …
- 2:41 AM Changeset [457] by
- how incredibly odd: in order to use CL=/B1c1l.exe /B2c2l.exe …
Mar 15, 2012:
- 10:03 PM Changeset [456] by
- this is 10.183
Mar 14, 2012:
- 10:52 PM Changeset [455] by
- adding traces to each and every left over retry count
- 10:18 PM Changeset [454] by
- clean up and unify tracing, adjust page width for assembler listing, …
Mar 13, 2012:
- 3:31 AM Changeset [453] by
- change the last spot that polls for a bit to use Delay instead of …
- 3:30 AM Changeset [452] by
- fix a stupid bug: it would not properly poll for the RESET bit with a …
- 3:28 AM Changeset [451] by
- change delay routine to avoid xchg bx,bx being placed into the code as …
Mar 12, 2012:
- 9:51 AM Ticket #17 (T61: After SUSPEND/RESUME memory stick is not assigned a drive letter) created by
- Using version 181/182 with ACPI3.19.15 on a T61 (built in 2 slot USB2) …
Mar 11, 2012:
- 10:22 PM Ticket #16 (Regression - with v179 USB worked - with v181 USB does not work) closed by
- fixed
- 2:37 PM Changeset [450] by
- report an error if required env. variable CLIB is not defined
Mar 9, 2012:
- 10:37 PM Changeset [449] by
- no, this is 10.182
- 10:36 PM Changeset [448] by
- no, this is 10.182
- 9:38 PM Changeset [447] by
- this is 10.182
- 9:37 PM Changeset [446] by
- svn.netlabs.org/usb/ticket/16: changes for ICH6 controller
Feb 17, 2012:
- 10:48 PM WikiStart edited by
- Add netlabs login info and some developer info (diff)
- 7:28 AM Ticket #16 (Regression - with v179 USB worked - with v181 USB does not work) created by
- I have a IBM Think Centre M51 computer. This computer was used by my …
- 12:47 AM Changeset [445] by
- migrating USBD.SYS to supporting variable length configuration data in …
Feb 16, 2012:
- 11:40 PM Changeset [444] by
- see eComStation bug #1400 and #3010 on USBD.SYS version 10.162: it's …
Feb 15, 2012:
Feb 12, 2012:
- 5:15 PM Ticket #14 (External USB harddisk works with 10.178 but not with 10.179) closed by
- fixed: With 10.181 all issues described in this ticket are gone again.
Feb 11, 2012:
- 3:37 PM Changeset [443] by
- this is 10.181
- 1:22 AM Changeset [442] by
- remove unnecessary delay
- 12:42 AM Changeset [441] by
- clean up
- 12:31 AM Changeset [440] by
- do not enable PME# on power down in order to prevent problems with …
Feb 10, 2012:
- 12:31 AM Changeset [439] by
- UHCI uses I/O mapped space and not mem mapped space
Feb 9, 2012:
- 11:18 PM Changeset [438] by
- changes necessary to avoid reading from PCI config space before …
- 1:41 AM Changeset [437] by
- according to PCI PM spec, transition to DO needs a 10ms recovery time …
Feb 8, 2012:
- 10:43 PM Changeset [436] by
- complete rework of suspend/resume for all HC flavours: chapter 8.2.2 …
Jan 29, 2012:
- 7:30 PM Changeset [435] by
- Lots of changes: reworked Sleep routine for UHCI/OHCI/EHCI, change …
Jan 23, 2012:
- 10:51 AM Ticket #15 (Acer noteboot problem with usbuhcd.sys driver) created by
- I recently install ecs 2.1 on my acer notebook Aspire 5680 This is …
- 1:53 AM Ticket #11 (177 release showing delays during boot for USBE & USBO drivers.) closed by
- fixed
Jan 22, 2012:
- 10:11 PM Changeset [434] by
- this is 10.180
Jan 21, 2012:
- 2:23 AM Changeset [433] by
- removing tight loops as several timings are considerably longer than …
- 1:58 AM Changeset [432] by
- backing out a change, using the DevHelp_Yield construct (tight loop …
Jan 20, 2012:
- 11:01 PM Ticket #14 (External USB harddisk works with 10.178 but not with 10.179) created by
- An external USB 3.0 harddisk of 950 GB (partitioned into a 500 GB and …
Jan 18, 2012:
- 10:47 PM Changeset [431] by
- this is 10.179
- 10:42 PM Changeset [430] by
- some simplifications
- 10:41 PM Changeset [429] by
- added Yield support to the reset root hub command: it's too long to …
- 10:38 PM Changeset [428] by
- typo: reading the command reg from a bogus I/O address, reduced the …
- 10:33 PM Changeset [427] by
- reduced the delay times as today's HW is really fast.
- 10:32 PM Changeset [426] by
- typo: reading the port status from a bogus I/O address, reduced the …
- 10:27 PM Changeset [425] by
- added tracing for suspend/resume
- 10:26 PM Changeset [424] by
- reduced the delay times as today's HW is really fast.
- 10:22 PM Changeset [423] by
- reduced the delay times as today's HW is really fast.
- 10:21 PM Changeset [422] by
- forgot to preset the retry counter to zero for the various retry loops …
- 6:59 PM Changeset [421] by
- UHCI: implementing some missing pieces of root hub processing, …
Jan 17, 2012:
- 7:39 PM Changeset [420] by
- UHCI and EHCI is shitty HW: use tight loops for all polls that go …
- 1:22 AM Ticket #2 (WD Book not working) closed by
- fixed
Note:
See TracTimeline
for information about the timeline view.
