Opened 13 years ago

Closed 13 years ago

#14 closed defect (fixed)

External USB harddisk works with 10.178 but not with 10.179

Reported by: herwigb Owned by: somebody
Priority: major Component: basedrv
Version: Keywords:
Cc:

Description

An external USB 3.0 harddisk of 950 GB (partitioned into a 500 GB and a 450 GB JFS partition) works fine with 10.178 build, but not with 10.179 on a ThinkServer TS100 (Intel 3210 ChipSet, will add PCI.exe output tomorrow). It does not work with original IBM drivers.

Attachments (4)

HERWIGB.ZIP​ (178.3 KB ) - added by Lars Erdmann 13 years ago.
updated EHCI and OHCI
TS100_PCI.zip​ (3.9 KB ) - added by herwigb 13 years ago.
PCI Output from Lenovo TS100 Server
usbmouse.zip​ (920 bytes ) - added by herwigb 13 years ago.
Report for USB-Mouse from USB ResMgr and USB-Dock
usbhdd.zip​ (876 bytes ) - added by herwigb 13 years ago.
Report about the harddisk from USB ResMgr and USBDock

Download all attachments as: .zip

Change History (11)

by Lars Erdmann, 13 years ago

Attachment: HERWIGB.ZIP​ added

updated EHCI and OHCI

comment:1 by Lars Erdmann, 13 years ago

Try the attached. Do not forget to copy the *.tff files to OS2\system\trace so that a formatted trace can be generated if necessary.

by herwigb, 13 years ago

Attachment: TS100_PCI.zip​ added

PCI Output from Lenovo TS100 Server

comment:2 by herwigb, 13 years ago

ok, with the one from HERWIGB.ZIP the external harddisk works again.

However the one from HERWIGB.ZIP triggers a different problem: The mouse does not work after boot. If I detach it and reattach it again, it will work normally. The mouse works normally with the IBM drivers and it works with 10.178. It is a standard optical Microsoft 3-Button wheel mouse.

comment:3 by Lars Erdmann, 13 years ago

Please attach device report for the mouse (from USB dock/USB resmgr).

by herwigb, 13 years ago

Attachment: usbmouse.zip​ added

Report for USB-Mouse from USB ResMgr and USB-Dock

by herwigb, 13 years ago

Attachment: usbhdd.zip​ added

Report about the harddisk from USB ResMgr and USBDock

comment:4 by herwigb, 13 years ago

Added both reports from the mouse and the harddisk.

One thing I noticed in USB-Dock: It reports "Hohe Geschwindigkeit (2.0)" for the mouse and "Schildkröte (sehr langsam)" for the harddisk. I did not have the impression the harddisk was slow - is there a way to reliably check whether that's wrong (ie. what transfer rates should I approximately see...).

I don't know whether that is a (more or less cosmetical) USB-Dock issue or a driver issue...

comment:5 by Lars Erdmann, 13 years ago

Looking at the reports from USB ResMgr/USBDock: your mouse is USB 2.0 and your harddisk is also USB 2.0. The problem with USB-Dock is likely a driver problem. I am currently working on getting a proper boot with multiple USB 2.0 devices plugged in on boot. I suspect that I hosed something along the way. I will need some more time.

Version 0, edited 13 years ago by Lars Erdmann (next)

comment:6 by herwigb, 13 years ago

The harddisk is NEVER connected during boot because the ThinkServer hangs during BIOS startup before the boot manager if the harddisk is plugged in during startup.

During boot only mouse and keyboard are connected and with the build from HERWIGB.ZIP the mouse does not work until I pull it and plug it in again.

comment:7 by herwigb, 13 years ago

Resolution: → fixed
Status: new → closed

With 10.181 all issues described in this ticket are gone again.

Note: See TracTickets for help on using tickets.