Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 3E30h 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S]
Command 0006h (Memory Access, BusMaster)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing)
Revision 0Dh, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
New Capabilities List Present:
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 3E98h CoffeeLake-S GT2 [UHD Graphics 630]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Display, type VGA
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A0000000h
Address 2 is a Memory Address (64-bit, Prefetchable) : 90000000h
Address 4 is an I/O Port : 4000h
System IRQ 16, INT# A
New Capabilities List Present:
  Vendor-Dependant Capability
  PCI Express Capability, Version 2
    Device/Port Type : 
      Root Complex Integrated Endpoint Device
      Unsupported Request Severity is Non-Fatal
    Device Status :
    Link Capabilities : 
      Maximum Link speed : Unknown (00h)!!
      Maximum Link Width : xReserved
      Link Port Number   : 0
    Link Control :
      Asynchronous Clocking in Use
    Link Status :
      Current Link speed : Unknown (00)!!
      Current Link Width : x0
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses
  Power Management Capability, Version 1.1
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 8, Device Function 0
Vendor 8086h Intel Corporation
Device 1911h Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class System, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A131F000h
System IRQ 16, INT# A
New Capabilities List Present:
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses
  Power Management Capability, Version 1.1
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)
  Unknown Capability (Code 13h)!!

Bus 0 (PCI Express), Device Number 18, Device Function 0
Vendor 8086h Intel Corporation
Device A379h Cannon Lake PCH Thermal Controller
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Data Aquisition & Signal Processing, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A131E000h
System IRQ 16, INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses

Bus 0 (PCI Express), Device Number 20, Device Function 0
Vendor 8086h Intel Corporation
Device A36Dh Cannon Lake PCH USB 3.1 xHCI Host Controller
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI), programming interface 30
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A1300000h..A130FFFFh
System IRQ (disabled), INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.1
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 375 mA
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is enabled
    MSI function can generate 64-bit addresses
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 20, Device Function 2
Vendor 8086h Intel Corporation
Device A36Fh Cannon Lake PCH Shared SRAM
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Memory, type RAM
Subsystem ID 72708086h Unknown
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (64-bit) : A1312000h
Address 2 is a Memory Address (64-bit) : A131D000h
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 21, Device Function 0
Vendor 8086h Intel Corporation
Device A368h Cannon Lake PCH Serial IO I2C Controller #0
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Serial, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : 00000000h
System IRQ 16, INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D3hot (Device off: no power to device, maximum power saving)
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 21, Device Function 1
Vendor 8086h Intel Corporation
Device A369h Cannon Lake PCH Serial IO I2C Controller #1
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Serial, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : 00000000h
System IRQ 17, INT# B
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D3hot (Device off: no power to device, maximum power saving)
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 22, Device Function 0
Vendor 8086h Intel Corporation
Device A360h Cannon Lake PCH HECI Controller
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A131A000h
System IRQ 16, INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D3hot
    PME# signalling is currently disabled
    3.3v AUX Current required : 0 mA (Self powered)
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 64-bit addresses
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 22, Device Function 3
Vendor 8086h Intel Corporation
Device A363h Cannon Lake PCH Active Management Technology - SOL
Command 0003h (I/O Access, Memory Access)
Status 00B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Serial - 16550
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is an I/O Port : 40A0h
Address 1 is a Memory Address (0-4GiB) : A1319000h
System IRQ 19, INT# D
New Capabilities List Present:
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 64-bit addresses
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 23, Device Function 0
Vendor 8086h Intel Corporation
Device A352h Cannon Lake PCH SATA AHCI Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
Revision 10h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type Serial ATA (AHCI 1.0)
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (0-4GiB) : A1310000h..A1311FFFh
Address 1 is a Memory Address (0-4GiB) : A1318000h..A13180FFh
Address 2 is an I/O Port : 4090h..4097h
Address 3 is an I/O Port : 4080h..4083h
Address 4 is an I/O Port : 4060h..407Fh
Address 5 is a Memory Address (0-4GiB) : A1317000h..A13177FFh
System IRQ (disabled), INT# A
New Capabilities List Present:
  Message Signalled Interrupt Capability
    MSI is enabled
    MSI function can generate 32-bit addresses
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D3hot
    PME# signalling is currently disabled
    3.3v AUX Current required : 0 mA (Self powered)
    Current Power State : D0 (Device operational, no power saving)
  Unknown Capability (Code 12h)!!

Bus 0 (PCI Express), Device Number 27, Device Function 0
Vendor 8086h Intel Corporation
Device A32Ch Cannon Lake PCH PCI Express Root Port #21
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F0h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 72708086h Unknown
Subsystem Vendor 8086h Intel Corporation
System IRQ 16, INT# A
PCI Bridge Information:
  Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
  Secondary Bus Command 0010h ()
  Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
  Secondary Bus Latency 00h
  I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
  Memory   Range Passed to Secondary Bus : A1200000h..A12FFFFFh
  Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
  PCI Express Capability, Version 2
    Device/Port Type : 
      Root port of PCI Express Root Complex
    Port Type :
      Port is an Expansion Slot
      Unsupported Request Severity is Non-Fatal
    Device Status :
      AUX Power Detected
    Link Capabilities : 
      Maximum Link speed : Unknown (03h)!!
      Maximum Link Width : x4
      Link Port Number   : 21
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : 2.5Gb/s
      Current Link Width : x1
    Slot Capabilities :
      Slot Power Limit Value :  42.000 Watts
      Physical slot Number 3
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses
  Subsystem ID & Subsystem Vendor ID Capability
    SSVID : 8086h
    SSID  : 7270h
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D0, D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 0 mA (Self powered)
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device A33Ch Cannon Lake PCH PCI Express Root Port #5
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F0h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
System IRQ 16, INT# A
PCI Bridge Information:
  Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
  Secondary Bus Command 0010h ()
  Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
  Secondary Bus Latency 00h
  I/O Port Range Passed to Secondary Bus : None
  Memory   Range Passed to Secondary Bus : A1100000h..A11FFFFFh
  Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
  PCI Express Capability, Version 2
    Device/Port Type : 
      Root port of PCI Express Root Complex
    Port Type :
      Port is an Expansion Slot
      Unsupported Request Severity is Non-Fatal
    Device Status :
      AUX Power Detected
    Link Capabilities : 
      Maximum Link speed : Unknown (03h)!!
      Maximum Link Width : x4
      Link Port Number   : 5
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : Unknown (03)!!
      Current Link Width : x4
    Slot Capabilities :
      Slot Power Limit Value :  10.000 Watts
      Physical slot Number 1
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses
  Subsystem ID & Subsystem Vendor ID Capability
    SSVID : 1071h
    SSID  : 0826h
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D0, D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 0 mA (Self powered)
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device A333h Cannon Lake PCH PCI Express Root Port #12
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F0h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
System IRQ 19, INT# D
PCI Bridge Information:
  Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
  Secondary Bus Command 0010h ()
  Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
  Secondary Bus Latency 00h
  I/O Port Range Passed to Secondary Bus : None
  Memory   Range Passed to Secondary Bus : A1000000h..A10FFFFFh
  Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
  PCI Express Capability, Version 2
    Device/Port Type : 
      Root port of PCI Express Root Complex
    Port Type :
      Port is an Expansion Slot
      Unsupported Request Severity is Non-Fatal
    Device Status :
      AUX Power Detected
    Link Capabilities : 
      Maximum Link speed : Unknown (03h)!!
      Maximum Link Width : x1
      Link Port Number   : 12
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : Unknown (02)!!
      Current Link Width : x1
    Slot Capabilities :
      Slot Power Limit Value :   0.240 Watts
      Physical slot Number 1
  Message Signalled Interrupt Capability
    MSI is disabled
    MSI function can generate 32-bit addresses
  Subsystem ID & Subsystem Vendor ID Capability
    SSVID : 1071h
    SSID  : 0826h
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D0, D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 0 mA (Self powered)
    Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device A328h Cannon Lake PCH Serial IO UART Host Controller
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Simple Communication, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : 00000000h
System IRQ 20, INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D3hot (Device off: no power to device, maximum power saving)
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 30, Device Function 1
Vendor 8086h Intel Corporation
Device A329h Unknown
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Simple Communication, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : 00000000h
System IRQ 21, INT# B
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D3hot (Device off: no power to device, maximum power saving)
  Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device A306h Q370 Chipset LPC/eSPI Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0200h (Medium Timing)
Revision 10h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac

Bus 0 (PCI Express), Device Number 31, Device Function 4
Vendor 8086h Intel Corporation
Device A323h Cannon Lake PCH SMBus Controller
Command 0003h (I/O Access, Memory Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 10h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (64-bit) : A1314000h
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : EFA0h
System IRQ 16, INT# A

Bus 0 (PCI Express), Device Number 31, Device Function 5
Vendor 8086h Intel Corporation
Device A324h Cannon Lake PCH SPI Controller
Command 0402h (Memory Access, Interrupt Disable)
Status 0000h
Revision 10h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type Other
Subsystem ID 08261071h Unknown
Subsystem Vendor 1071h Mitac
Address 0 is a Memory Address (0-4GiB) : FE010000h

Bus 1 (PCI Express), Device Number 0, Device Function 0
Vendor 10ECh Realtek Semiconductor Co., Ltd.
Device 8168h RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 15h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Network, type Ethernet
Subsystem ID 012310ECh Unknown
Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd.
Address 0 is an I/O Port : 3000h..30FFh
Address 1 is not present or not configured!
Address 2 is a Memory Address (64-bit) : A1204000h..A1204FFFh
Address 4 is a Memory Address (64-bit) : A1200000h..A1203FFFh
System IRQ (disabled), INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Supports low power State D1
    Supports low power State D2
    Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 375 mA
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is enabled
    MSI function can generate 64-bit addresses
  PCI Express Capability, Version 2
    Device/Port Type : 
      PCI Express Endpoint Device
    Device Capabilities :
      Unsupported Request Severity is Fatal
    Device Status :
      Correctable Error Detected
      Unsupported Request Detected
      AUX Power Detected
    Link Capabilities : 
      Maximum Link speed : 2.5Gb/s
      Maximum Link Width : x1
      Link Port Number   : 0
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : 2.5Gb/s
      Current Link Width : x1
  MSI-X Capability

Bus 2 (PCI Express), Device Number 0, Device Function 0
Vendor 14A4h Lite-On Technology Corporation
Device 21F1h Unknown
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Storage, type Unknown!
Subsystem ID 10931B4Bh Unknown
Subsystem Vendor 1B4Bh Marvell Technology Group Ltd.
Address 0 is a Memory Address (64-bit) : A1110000h..A1113FFFh
System IRQ (disabled), INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Does not support PME# signalling
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is enabled
    MSI function can generate 64-bit addresses
  PCI Express Capability, Version 2
    Device/Port Type : 
      PCI Express Endpoint Device
    Device Capabilities :
      Unsupported Request Severity is Fatal
    Device Status :
      Correctable Error Detected
      Unsupported Request Detected
    Link Capabilities : 
      Maximum Link speed : Unknown (03h)!!
      Maximum Link Width : x4
      Link Port Number   : 0
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : Unknown (03)!!
      Current Link Width : x4
  MSI-X Capability

Bus 3 (PCI Express), Device Number 0, Device Function 0
Vendor 1912h Renesas Technology Corp.
Device 0015h uPD720202 USB 3.0 Host Controller
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Serial, type USB (UHCI), programming interface 30
Subsystem ID 00151912h Unknown (Generic ID)
Subsystem Vendor 1912h Renesas Technology Corp.
Address 0 is a Memory Address (64-bit) : A1000000h..A1001FFFh
System IRQ (disabled), INT# A
New Capabilities List Present:
  Power Management Capability, Version 1.2
    Does not support low power State D1 or D2
    Supports PME# signalling from mode(s) D0, D3hot, D3cold
    PME# signalling is currently disabled
    3.3v AUX Current required : 375 mA
    Current Power State : D0 (Device operational, no power saving)
  Message Signalled Interrupt Capability
    MSI is enabled
    MSI function can generate 64-bit addresses
  MSI-X Capability
  PCI Express Capability, Version 2
    Device/Port Type : 
      PCI Express Endpoint Device
    Device Capabilities :
      Unsupported Request Severity is Non-Fatal
    Device Status :
      Correctable Error Detected
      Unsupported Request Detected
      AUX Power Detected
    Link Capabilities : 
      Maximum Link speed : Unknown (02h)!!
      Maximum Link Width : x1
      Link Port Number   : 0
    Link Control :
      Common Clock Configuration In Use
    Link Status :
      Current Link speed : Unknown (02)!!
      Current Link Width : x1