Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version ha_merged, 17 Nov 2014 09:07:55"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 5
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2770h 82945G/GZ/P/PL Memory Controller Hub
 Command 0006h (Memory Access, BusMaster)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 817A1043h P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 1, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2771h 82945G/GZ/P/PL PCI Express Root Port
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 02h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 817A1043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 System IRQ 16, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : BC000000h..BFFFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : C0000000h..EFFFFFFFh
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 817Ah
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 2
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16
     Slot Capabilities :
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27D8h NM10/ICH7 Family High Definition Audio Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 82901043h P5KPL-VM Motherboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is a Memory Address (64-bit) : BBDF8000h..BBDFBFFFh
 System IRQ 19, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27D0h NM10/ICH7 Family PCI Express Port 1
 Command 0507h (I/O Access, Memory Access, BusMaster, System Errors,
   Interrupt Disable)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 81791043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 System IRQ 16, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : None
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 8179h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 1
 Vendor 8086h Intel Corporation
 Device 27D2h NM10/ICH7 Family PCI Express Port 2
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 81791043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 System IRQ 17, INT# B
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : BBF00000h..BBFFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 2
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 8179h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27C8h NM10/ICH7 Family USB UHCI Controller #1
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 8000h..8013h
 System IRQ 20, INT# A

 Bus 0 (PCI Express), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 27C9h NM10/ICH7 Family USB UHCI Controller #2
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 8400h..8413h
 System IRQ 17, INT# B

 Bus 0 (PCI Express), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 27CAh NM10/ICH7 Family USB UHCI Controller #3
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 8800h..8813h
 System IRQ 18, INT# C

 Bus 0 (PCI Express), Device Number 29, Device Function 3
 Vendor 8086h Intel Corporation
 Device 27CBh NM10/ICH7 Family USB UHCI Controller #4
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 9000h..9013h
 System IRQ 19, INT# D

 Bus 0 (PCI Express), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 27CCh NM10/ICH7 Family USB2 EHCI Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is a Memory Address (0-4GiB) : BBDFFC00h..BBDFFCFFh
 System IRQ 20, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI Express), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 244Eh 82801 PCI Bridge
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision E1h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 Subsystem ID 81791043h P5K PRO Motherboard (Guess Only!)
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 20h
   I/O Port Range Passed to Secondary Bus : B000h..BFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : BBE00000h..BBEFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1043h
     SSID  : 8179h

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Bridge
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 81791043h P5KPL-VM Motherboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 1
 Vendor 8086h Intel Corporation
 Device 27DFh 82801G (ICH7 Family) IDE Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 81791043h P5KPL-VM Motherboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is an I/O Port : 0000h (unconfigured)
 Address 1 is an I/O Port : 0000h (unconfigured)
 Address 2 is an I/O Port : 0000h (unconfigured)
 Address 3 is an I/O Port : 0000h (unconfigured)
 Address 4 is an I/O Port : FFA0h..FFA7h
 System IRQ 22, INT# A

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 27C0h NM10/ICH7 Family SATA Controller [IDE mode]
 Command 0005h (I/O Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 26011043h P5KPL-VM Motherboard (Guess Only!)
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is an I/O Port : A800h..A807h
 Address 1 is an I/O Port : A400h
 Address 2 is an I/O Port : A000h..A007h
 Address 3 is an I/O Port : 9800h
 Address 4 is an I/O Port : 9400h..9407h
 System IRQ 23, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 27DAh NM10/ICH7 Family SMBus Controller
 Command 0001h (I/O Access)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 81791043h P5KPL-VM Motherboard
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 0400h
 System IRQ 23, INT# B

 Bus 1 (PCI), Device Number 0, Device Function 0
 Vendor 1186h D-Link System Inc
 Device 1300h RTL8139 Ethernet
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 10h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 20h, Maximum Bus Latency 40h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 13001186h DFE-538TX 10/100 Ethernet Adapter (Generic ID)
 Subsystem Vendor 1186h D-Link System Inc
 Address 0 is an I/O Port : B800h
 Address 1 is a Memory Address (0-4GiB) : BBEFF800h
 System IRQ 17, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (PCI), Device Number 1, Device Function 0
 Vendor 1033h NEC Corporation
 Device 0035h OHCI USB Controller
 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 43h, Header Type 80h, Bus Latency Timer 40h
 Minimum Bus Grant 01h, Maximum Bus Latency 2Ah
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Serial, type USB (OHCI)
 Subsystem ID 00351186h Unknown
 Subsystem Vendor 1186h D-Link System Inc
 Address 0 is a Memory Address (0-4GiB) : BBEFD000h..BBEFDFFFh
 System IRQ 21, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (PCI), Device Number 1, Device Function 1
 Vendor 1033h NEC Corporation
 Device 0035h OHCI USB Controller
 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 43h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant F1h, Maximum Bus Latency 2Ah
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Serial, type USB (OHCI)
 Subsystem ID 00351186h Unknown
 Subsystem Vendor 1186h D-Link System Inc
 Address 0 is a Memory Address (0-4GiB) : BBEFE000h..BBEFEFFFh
 System IRQ 22, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (PCI), Device Number 1, Device Function 2
 Vendor 1033h NEC Corporation
 Device 00E0h uPD72010x USB 2.0 Controller
 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 10h, Maximum Bus Latency 22h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID F1011186h Unknown
 Subsystem Vendor 1186h D-Link System Inc
 Address 0 is a Memory Address (0-4GiB) : BBEFFC00h..BBEFFCFFh
 System IRQ 23, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 2 (PCI Express), Device Number 0, Device Function 0
 Vendor 1969h Qualcomm Atheros
 Device 2048h Attansic L2 Fast Ethernet
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision A0h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 82331043h Unknown
 Subsystem Vendor 1043h ASUSTeK Computer Inc.
 Address 0 is a Memory Address (64-bit) : BBFC0000h..BBFFFFFFh
 System IRQ 17, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Attention Button Present on Device
       Attention Indicator Present on Device
       Power Indicator Present on Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       Non-Fatal Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 4 (AGP), Device Number 0, Device Function 0
 Vendor 10DEh NVIDIA Corporation
 Device 0640h G96 [GeForce 9500 GT]
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision A1h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 16 Bytes (4 DWords)
 PCI Class Display, type VGA
 Address 0 is a Memory Address (0-4GiB) : BF000000h
 Address 1 is a Memory Address (64-bit, Prefetchable) : C0000000h
 Address 3 is a Memory Address (64-bit) : BC000000h
 Address 5 is an I/O Port : E800h
 System IRQ 16, INT# A
 Expansion ROM of 512 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x16
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x16
   Vendor-Dependant Capability

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:8140h
 Table Version 1.0 - OK
 Table size 272 bytes - OK
 Table Checksum 21h - OK
 PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Bridge
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 14,15,16,17,18,19,20,21,22,23 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 3 PCI Devices
             IRQ 17 is shared by 4 PCI Devices
             IRQ 19 is shared by 2 PCI Devices
             IRQ 20 is shared by 2 PCI Devices
             IRQ 22 is shared by 2 PCI Devices
             IRQ 23 is shared by 3 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...