Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43" PCI BIOS Version 2.10 found! Number of PCI Busses : 1 PCI Characteristics : Config Mechanism 1 Searching for PCI Devices using the OEMHLP$ driver Bus 0 (PCI), Device Number 0, Device Function 0 Vendor 8086h Intel Corporation Device 7030h 430VX - 82437VX TVX [Triton VX] Command 0006h (Memory Access, BusMaster) Status 2200h (Received Master Abort, Medium Timing) Revision 01h, Header Type 00h, Bus Latency Timer 20h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to HOST Bus 0 (PCI), Device Number 7, Device Function 0 Vendor 8086h Intel Corporation Device 7000h 82371SB PIIX3 ISA [Natoma/Triton II] Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 00h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to ISA Bus 0 (PCI), Device Number 7, Device Function 1 Vendor 8086h Intel Corporation Device 7010h 82371SB PIIX3 IDE [Natoma/Triton II] Command 0005h (I/O Access, BusMaster) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 00h, Header Type 00h, Bus Latency Timer 20h Self test 00h (Self test not supported) PCI Class Storage, type IDE (ATA) PCI EIDE Controller Features : BusMaster EIDE is supported Primary Channel is at I/O Port 01F0h and IRQ 14 Secondary Channel is at I/O Port 0170h and IRQ 15 Address 0 is not present or not configured! Address 1 is not present or not configured! Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : 9000h..9007h Bus 0 (PCI), Device Number 17, Device Function 0 Vendor 10DEh nVidia Corporation Device 002Dh NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] Command 0007h (I/O Access, Memory Access, BusMaster) Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing) Revision 15h, Header Type 00h, Bus Latency Timer 20h Minimum Bus Grant 05h, Maximum Bus Latency 01h Self test 00h (Self test not supported) PCI Class Display, type VGA Address 0 is a Memory Address (0-4GiB) : E2000000h..E2FFFFFFh Address 1 is a Memory Address (0-4GiB, Prefetchable) : E0000000h..E1FFFFFFh System IRQ 11, INT# A Expansion ROM of 64 KiB decoded by this card, currently disabled New Capabilities List Present: Power Management Capability, Version 1.0 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 19, Device Function 0 Vendor 10ECh Realtek Semiconductor Co., Ltd. Device 8139h RTL-8139/8139C/8139C+ Command 0007h (I/O Access, Memory Access, BusMaster) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 10h, Header Type 00h, Bus Latency Timer 20h Minimum Bus Grant 20h, Maximum Bus Latency 40h Self test 00h (Self test not supported) PCI Class Network, type Ethernet Subsystem ID 813910ECh RT8139 (A/B/C/810x) Fast Ethernet Adapter (Generic ID) Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd. Address 0 is an I/O Port : 6000h..60FFh Address 1 is a Memory Address (0-4GiB) : E3000000h..E30000FFh System IRQ 10, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Vital Product Data Capability VPD Data not present Bus 0 (PCI), Device Number 20, Device Function 0 Vendor 1033h NEC Corporation Device 0035h USB Command 0006h (Memory Access, BusMaster) Status 0210h (Has Capabilities List, Medium Timing) Revision 41h, Header Type 80h, Bus Latency Timer 20h Minimum Bus Grant 01h, Maximum Bus Latency 2Ah Self test 00h (Self test not supported) PCI Class Serial, type USB (OHCI) Subsystem ID 010514C2h PTI-205N USB 2.0 Host Controller Subsystem Vendor 14C2h DTK Computer Address 0 is a Memory Address (0-4GiB) : E3001000h..E3001FFFh System IRQ 10, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 20, Device Function 1 Vendor 1033h NEC Corporation Device 0035h USB Command 0006h (Memory Access, BusMaster) Status 0210h (Has Capabilities List, Medium Timing) Revision 41h, Header Type 00h, Bus Latency Timer 20h Minimum Bus Grant 01h, Maximum Bus Latency 2Ah Self test 00h (Self test not supported) PCI Class Serial, type USB (OHCI) Subsystem ID 010514C2h PTI-205N USB 2.0 Host Controller Subsystem Vendor 14C2h DTK Computer Address 0 is a Memory Address (0-4GiB) : E3002000h..E3002FFFh System IRQ 11, INT# B New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI), Device Number 20, Device Function 2 Vendor 1033h NEC Corporation Device 00E0h USB 2.0 Command 0006h (Memory Access, BusMaster) Status 0210h (Has Capabilities List, Medium Timing) Revision 02h, Header Type 00h, Bus Latency Timer 20h Minimum Bus Grant 10h, Maximum Bus Latency 22h Self test 00h (Self test not supported) PCI Class Serial, type USB 2.0 (EHCI) Subsystem ID 020514C2h PTI-205N USB 2.0 Host Controller Subsystem Vendor 14C2h DTK Computer Address 0 is a Memory Address (0-4GiB) : E3003000h..E30030FFh System IRQ 10, INT# C New Capabilities List Present: Power Management Capability, Version 1.1 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) ROM PCI IRQ routing table Tests.... No ROM PCI IRQ routing table found!!! IRQ Summary: IRQs 10,11,14,15 are used by PCI devices Shared IRQs: IRQ 10 is shared by 3 PCI Devices IRQ 11 is shared by 2 PCI Devices