Ticket #96: sotm_texas.txt

File sotm_texas.txt, 24.4 KB (added by zlmikhail, 4 months ago)

Board with Texas Instruments TUSB73x0 controller for 1 port. The board is unstable.

Line 
1Bus 0 (PCI Express), Device Number 0, Device Function 0
2Vendor 8086h Intel Corporation
3Device 3E30h 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S]
4Command 0006h (Memory Access, BusMaster)
5Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing)
6Revision 0Dh, Header Type 00h, Bus Latency Timer 00h
7Self test 00h (Self test not supported)
8PCI Class Bridge, type PCI to HOST
9Subsystem ID 08261071h Unknown
10Subsystem Vendor 1071h Mitac
11New Capabilities List Present:
12 Vendor-Dependant Capability
13
14Bus 0 (PCI Express), Device Number 2, Device Function 0
15Vendor 8086h Intel Corporation
16Device 3E98h CoffeeLake-S GT2 [UHD Graphics 630]
17Command 0007h (I/O Access, Memory Access, BusMaster)
18Status 0010h (Has Capabilities List, Fast Timing)
19Revision 02h, Header Type 00h, Bus Latency Timer 00h
20Self test 00h (Self test not supported)
21Cache line size 64 Bytes (16 DWords)
22PCI Class Display, type VGA
23Subsystem ID 08261071h Unknown
24Subsystem Vendor 1071h Mitac
25Address 0 is a Memory Address (64-bit) : A0000000h
26Address 2 is a Memory Address (64-bit, Prefetchable) : 90000000h
27Address 4 is an I/O Port : 4000h
28System IRQ 16, INT# A
29New Capabilities List Present:
30 Vendor-Dependant Capability
31 PCI Express Capability, Version 2
32 Device/Port Type :
33 Root Complex Integrated Endpoint Device
34 Unsupported Request Severity is Non-Fatal
35 Device Status :
36 Link Capabilities :
37 Maximum Link speed : Unknown (00h)!!
38 Maximum Link Width : xReserved
39 Link Port Number : 0
40 Link Control :
41 Asynchronous Clocking in Use
42 Link Status :
43 Current Link speed : Unknown (00)!!
44 Current Link Width : x0
45 Message Signalled Interrupt Capability
46 MSI is disabled
47 MSI function can generate 32-bit addresses
48 Power Management Capability, Version 1.1
49 Does not support low power State D1 or D2
50 Does not support PME# signalling
51 Current Power State : D0 (Device operational, no power saving)
52
53Bus 0 (PCI Express), Device Number 8, Device Function 0
54Vendor 8086h Intel Corporation
55Device 1911h Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model
56Command 0000h (Bus Access Disabled!!)
57Status 0010h (Has Capabilities List, Fast Timing)
58Revision 00h, Header Type 00h, Bus Latency Timer 00h
59Self test 00h (Self test not supported)
60Cache line size 64 Bytes (16 DWords)
61PCI Class System, type Other
62Subsystem ID 08261071h Unknown
63Subsystem Vendor 1071h Mitac
64Address 0 is a Memory Address (64-bit) : A131F000h
65System IRQ 16, INT# A
66New Capabilities List Present:
67 Message Signalled Interrupt Capability
68 MSI is disabled
69 MSI function can generate 32-bit addresses
70 Power Management Capability, Version 1.1
71 Does not support low power State D1 or D2
72 Does not support PME# signalling
73 Current Power State : D0 (Device operational, no power saving)
74 Unknown Capability (Code 13h)!!
75
76Bus 0 (PCI Express), Device Number 18, Device Function 0
77Vendor 8086h Intel Corporation
78Device A379h Cannon Lake PCH Thermal Controller
79Command 0000h (Bus Access Disabled!!)
80Status 0010h (Has Capabilities List, Fast Timing)
81Revision 10h, Header Type 80h, Bus Latency Timer 00h
82Self test 00h (Self test not supported)
83PCI Class Data Aquisition & Signal Processing, type Other
84Subsystem ID 08261071h Unknown
85Subsystem Vendor 1071h Mitac
86Address 0 is a Memory Address (64-bit) : A131E000h
87System IRQ 16, INT# A
88New Capabilities List Present:
89 Power Management Capability, Version 1.2
90 Does not support low power State D1 or D2
91 Does not support PME# signalling
92 Current Power State : D0 (Device operational, no power saving)
93 Message Signalled Interrupt Capability
94 MSI is disabled
95 MSI function can generate 32-bit addresses
96
97Bus 0 (PCI Express), Device Number 20, Device Function 0
98Vendor 8086h Intel Corporation
99Device A36Dh Cannon Lake PCH USB 3.1 xHCI Host Controller
100Command 0006h (Memory Access, BusMaster)
101Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
102Revision 10h, Header Type 80h, Bus Latency Timer 00h
103Self test 00h (Self test not supported)
104PCI Class Serial, type USB (UHCI), programming interface 30
105Subsystem ID 08261071h Unknown
106Subsystem Vendor 1071h Mitac
107Address 0 is a Memory Address (64-bit) : A1300000h..A130FFFFh
108System IRQ (disabled), INT# A
109New Capabilities List Present:
110 Power Management Capability, Version 1.1
111 Does not support low power State D1 or D2
112 Supports PME# signalling from mode(s) D3hot, D3cold
113 PME# signalling is currently disabled
114 3.3v AUX Current required : 375 mA
115 Current Power State : D0 (Device operational, no power saving)
116 Message Signalled Interrupt Capability
117 MSI is enabled
118 MSI function can generate 64-bit addresses
119 Vendor-Dependant Capability
120
121Bus 0 (PCI Express), Device Number 20, Device Function 2
122Vendor 8086h Intel Corporation
123Device A36Fh Cannon Lake PCH Shared SRAM
124Command 0000h (Bus Access Disabled!!)
125Status 0010h (Has Capabilities List, Fast Timing)
126Revision 10h, Header Type 00h, Bus Latency Timer 00h
127Self test 00h (Self test not supported)
128Cache line size 64 Bytes (16 DWords)
129PCI Class Memory, type RAM
130Subsystem ID 72708086h Unknown
131Subsystem Vendor 8086h Intel Corporation
132Address 0 is a Memory Address (64-bit) : A1312000h
133Address 2 is a Memory Address (64-bit) : A131D000h
134New Capabilities List Present:
135 Power Management Capability, Version 1.2
136 Does not support low power State D1 or D2
137 Does not support PME# signalling
138 Current Power State : D0 (Device operational, no power saving)
139
140Bus 0 (PCI Express), Device Number 21, Device Function 0
141Vendor 8086h Intel Corporation
142Device A368h Cannon Lake PCH Serial IO I2C Controller #0
143Command 0000h (Bus Access Disabled!!)
144Status 0010h (Has Capabilities List, Fast Timing)
145Revision 10h, Header Type 80h, Bus Latency Timer 00h
146Self test 00h (Self test not supported)
147Cache line size 64 Bytes (16 DWords)
148PCI Class Serial, type Other
149Subsystem ID 08261071h Unknown
150Subsystem Vendor 1071h Mitac
151Address 0 is a Memory Address (64-bit) : 00000000h
152System IRQ 16, INT# A
153New Capabilities List Present:
154 Power Management Capability, Version 1.2
155 Does not support low power State D1 or D2
156 Does not support PME# signalling
157 Current Power State : D3hot (Device off: no power to device, maximum power saving)
158 Vendor-Dependant Capability
159
160Bus 0 (PCI Express), Device Number 21, Device Function 1
161Vendor 8086h Intel Corporation
162Device A369h Cannon Lake PCH Serial IO I2C Controller #1
163Command 0000h (Bus Access Disabled!!)
164Status 0010h (Has Capabilities List, Fast Timing)
165Revision 10h, Header Type 80h, Bus Latency Timer 00h
166Self test 00h (Self test not supported)
167Cache line size 64 Bytes (16 DWords)
168PCI Class Serial, type Other
169Subsystem ID 08261071h Unknown
170Subsystem Vendor 1071h Mitac
171Address 0 is a Memory Address (64-bit) : 00000000h
172System IRQ 17, INT# B
173New Capabilities List Present:
174 Power Management Capability, Version 1.2
175 Does not support low power State D1 or D2
176 Does not support PME# signalling
177 Current Power State : D3hot (Device off: no power to device, maximum power saving)
178 Vendor-Dependant Capability
179
180Bus 0 (PCI Express), Device Number 22, Device Function 0
181Vendor 8086h Intel Corporation
182Device A360h Cannon Lake PCH HECI Controller
183Command 0000h (Bus Access Disabled!!)
184Status 0010h (Has Capabilities List, Fast Timing)
185Revision 10h, Header Type 80h, Bus Latency Timer 00h
186Self test 00h (Self test not supported)
187PCI Class Simple Communication, type Other
188Subsystem ID 08261071h Unknown
189Subsystem Vendor 1071h Mitac
190Address 0 is a Memory Address (64-bit) : A131A000h
191System IRQ 16, INT# A
192New Capabilities List Present:
193 Power Management Capability, Version 1.2
194 Does not support low power State D1 or D2
195 Supports PME# signalling from mode(s) D3hot
196 PME# signalling is currently disabled
197 3.3v AUX Current required : 0 mA (Self powered)
198 Current Power State : D0 (Device operational, no power saving)
199 Message Signalled Interrupt Capability
200 MSI is disabled
201 MSI function can generate 64-bit addresses
202 Vendor-Dependant Capability
203
204Bus 0 (PCI Express), Device Number 22, Device Function 3
205Vendor 8086h Intel Corporation
206Device A363h Cannon Lake PCH Active Management Technology - SOL
207Command 0003h (I/O Access, Memory Access)
208Status 00B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
209Revision 10h, Header Type 80h, Bus Latency Timer 00h
210Self test 00h (Self test not supported)
211PCI Class Simple Communication, type Serial - 16550
212Subsystem ID 08261071h Unknown
213Subsystem Vendor 1071h Mitac
214Address 0 is an I/O Port : 40A0h
215Address 1 is a Memory Address (0-4GiB) : A1319000h
216System IRQ 19, INT# D
217New Capabilities List Present:
218 Message Signalled Interrupt Capability
219 MSI is disabled
220 MSI function can generate 64-bit addresses
221 Power Management Capability, Version 1.2
222 Does not support low power State D1 or D2
223 Does not support PME# signalling
224 Current Power State : D0 (Device operational, no power saving)
225
226Bus 0 (PCI Express), Device Number 23, Device Function 0
227Vendor 8086h Intel Corporation
228Device A352h Cannon Lake PCH SATA AHCI Controller
229Command 0007h (I/O Access, Memory Access, BusMaster)
230Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
231Revision 10h, Header Type 00h, Bus Latency Timer 00h
232Self test 00h (Self test not supported)
233PCI Class Storage, type Serial ATA (AHCI 1.0)
234Subsystem ID 08261071h Unknown
235Subsystem Vendor 1071h Mitac
236Address 0 is a Memory Address (0-4GiB) : A1310000h..A1311FFFh
237Address 1 is a Memory Address (0-4GiB) : A1318000h..A13180FFh
238Address 2 is an I/O Port : 4090h..4097h
239Address 3 is an I/O Port : 4080h..4083h
240Address 4 is an I/O Port : 4060h..407Fh
241Address 5 is a Memory Address (0-4GiB) : A1317000h..A13177FFh
242System IRQ (disabled), INT# A
243New Capabilities List Present:
244 Message Signalled Interrupt Capability
245 MSI is enabled
246 MSI function can generate 32-bit addresses
247 Power Management Capability, Version 1.2
248 Does not support low power State D1 or D2
249 Supports PME# signalling from mode(s) D3hot
250 PME# signalling is currently disabled
251 3.3v AUX Current required : 0 mA (Self powered)
252 Current Power State : D0 (Device operational, no power saving)
253 Unknown Capability (Code 12h)!!
254
255Bus 0 (PCI Express), Device Number 27, Device Function 0
256Vendor 8086h Intel Corporation
257Device A32Ch Cannon Lake PCH PCI Express Root Port #21
258Command 0007h (I/O Access, Memory Access, BusMaster)
259Status 0010h (Has Capabilities List, Fast Timing)
260Revision F0h, Header Type 81h, Bus Latency Timer 00h
261Self test 00h (Self test not supported)
262Cache line size 64 Bytes (16 DWords)
263PCI Class Bridge, type PCI to PCI
264Subsystem ID 72708086h Unknown
265Subsystem Vendor 8086h Intel Corporation
266System IRQ 16, INT# A
267PCI Bridge Information:
268 Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
269 Secondary Bus Command 0010h ()
270 Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
271 Secondary Bus Latency 00h
272 I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
273 Memory Range Passed to Secondary Bus : A1200000h..A12FFFFFh
274 Prefetchable Memory Range Passed to Secondary Bus : None
275New Capabilities List Present:
276 PCI Express Capability, Version 2
277 Device/Port Type :
278 Root port of PCI Express Root Complex
279 Port Type :
280 Port is an Expansion Slot
281 Unsupported Request Severity is Non-Fatal
282 Device Status :
283 AUX Power Detected
284 Link Capabilities :
285 Maximum Link speed : Unknown (03h)!!
286 Maximum Link Width : x4
287 Link Port Number : 21
288 Link Control :
289 Common Clock Configuration In Use
290 Link Status :
291 Current Link speed : 2.5Gb/s
292 Current Link Width : x1
293 Slot Capabilities :
294 Slot Power Limit Value : 42.000 Watts
295 Physical slot Number 3
296 Message Signalled Interrupt Capability
297 MSI is disabled
298 MSI function can generate 32-bit addresses
299 Subsystem ID & Subsystem Vendor ID Capability
300 SSVID : 8086h
301 SSID : 7270h
302 Power Management Capability, Version 1.2
303 Does not support low power State D1 or D2
304 Supports PME# signalling from mode(s) D0, D3hot, D3cold
305 PME# signalling is currently disabled
306 3.3v AUX Current required : 0 mA (Self powered)
307 Current Power State : D0 (Device operational, no power saving)
308
309Bus 0 (PCI Express), Device Number 28, Device Function 0
310Vendor 8086h Intel Corporation
311Device A33Ch Cannon Lake PCH PCI Express Root Port #5
312Command 0007h (I/O Access, Memory Access, BusMaster)
313Status 0010h (Has Capabilities List, Fast Timing)
314Revision F0h, Header Type 81h, Bus Latency Timer 00h
315Self test 00h (Self test not supported)
316Cache line size 64 Bytes (16 DWords)
317PCI Class Bridge, type PCI to PCI
318Subsystem ID 08261071h Unknown
319Subsystem Vendor 1071h Mitac
320System IRQ 16, INT# A
321PCI Bridge Information:
322 Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
323 Secondary Bus Command 0010h ()
324 Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
325 Secondary Bus Latency 00h
326 I/O Port Range Passed to Secondary Bus : None
327 Memory Range Passed to Secondary Bus : A1100000h..A11FFFFFh
328 Prefetchable Memory Range Passed to Secondary Bus : None
329New Capabilities List Present:
330 PCI Express Capability, Version 2
331 Device/Port Type :
332 Root port of PCI Express Root Complex
333 Port Type :
334 Port is an Expansion Slot
335 Unsupported Request Severity is Non-Fatal
336 Device Status :
337 AUX Power Detected
338 Link Capabilities :
339 Maximum Link speed : Unknown (03h)!!
340 Maximum Link Width : x4
341 Link Port Number : 5
342 Link Control :
343 Common Clock Configuration In Use
344 Link Status :
345 Current Link speed : Unknown (03)!!
346 Current Link Width : x4
347 Slot Capabilities :
348 Slot Power Limit Value : 10.000 Watts
349 Physical slot Number 1
350 Message Signalled Interrupt Capability
351 MSI is disabled
352 MSI function can generate 32-bit addresses
353 Subsystem ID & Subsystem Vendor ID Capability
354 SSVID : 1071h
355 SSID : 0826h
356 Power Management Capability, Version 1.2
357 Does not support low power State D1 or D2
358 Supports PME# signalling from mode(s) D0, D3hot, D3cold
359 PME# signalling is currently disabled
360 3.3v AUX Current required : 0 mA (Self powered)
361 Current Power State : D0 (Device operational, no power saving)
362
363Bus 0 (PCI Express), Device Number 29, Device Function 0
364Vendor 8086h Intel Corporation
365Device A333h Cannon Lake PCH PCI Express Root Port #12
366Command 0007h (I/O Access, Memory Access, BusMaster)
367Status 0010h (Has Capabilities List, Fast Timing)
368Revision F0h, Header Type 81h, Bus Latency Timer 00h
369Self test 00h (Self test not supported)
370Cache line size 64 Bytes (16 DWords)
371PCI Class Bridge, type PCI to PCI
372Subsystem ID 08261071h Unknown
373Subsystem Vendor 1071h Mitac
374System IRQ 19, INT# D
375PCI Bridge Information:
376 Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
377 Secondary Bus Command 0010h ()
378 Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
379 Secondary Bus Latency 00h
380 I/O Port Range Passed to Secondary Bus : None
381 Memory Range Passed to Secondary Bus : A1000000h..A10FFFFFh
382 Prefetchable Memory Range Passed to Secondary Bus : None
383New Capabilities List Present:
384 PCI Express Capability, Version 2
385 Device/Port Type :
386 Root port of PCI Express Root Complex
387 Port Type :
388 Port is an Expansion Slot
389 Unsupported Request Severity is Non-Fatal
390 Device Status :
391 AUX Power Detected
392 Link Capabilities :
393 Maximum Link speed : 2.5Gb/s
394 Maximum Link Width : x1
395 Link Port Number : 12
396 Link Control :
397 Common Clock Configuration In Use
398 Link Status :
399 Current Link speed : 2.5Gb/s
400 Current Link Width : x1
401 Slot Capabilities :
402 Slot Power Limit Value : 24.000 Watts
403 Physical slot Number 1
404 Message Signalled Interrupt Capability
405 MSI is disabled
406 MSI function can generate 32-bit addresses
407 Subsystem ID & Subsystem Vendor ID Capability
408 SSVID : 1071h
409 SSID : 0826h
410 Power Management Capability, Version 1.2
411 Does not support low power State D1 or D2
412 Supports PME# signalling from mode(s) D0, D3hot, D3cold
413 PME# signalling is currently disabled
414 3.3v AUX Current required : 0 mA (Self powered)
415 Current Power State : D0 (Device operational, no power saving)
416
417Bus 0 (PCI Express), Device Number 30, Device Function 0
418Vendor 8086h Intel Corporation
419Device A328h Cannon Lake PCH Serial IO UART Host Controller
420Command 0000h (Bus Access Disabled!!)
421Status 0010h (Has Capabilities List, Fast Timing)
422Revision 10h, Header Type 80h, Bus Latency Timer 00h
423Self test 00h (Self test not supported)
424Cache line size 64 Bytes (16 DWords)
425PCI Class Simple Communication, type Other
426Subsystem ID 08261071h Unknown
427Subsystem Vendor 1071h Mitac
428Address 0 is a Memory Address (64-bit) : 00000000h
429System IRQ 20, INT# A
430New Capabilities List Present:
431 Power Management Capability, Version 1.2
432 Does not support low power State D1 or D2
433 Does not support PME# signalling
434 Current Power State : D3hot (Device off: no power to device, maximum power saving)
435 Vendor-Dependant Capability
436
437Bus 0 (PCI Express), Device Number 30, Device Function 1
438Vendor 8086h Intel Corporation
439Device A329h Unknown
440Command 0000h (Bus Access Disabled!!)
441Status 0010h (Has Capabilities List, Fast Timing)
442Revision 10h, Header Type 80h, Bus Latency Timer 00h
443Self test 00h (Self test not supported)
444Cache line size 64 Bytes (16 DWords)
445PCI Class Simple Communication, type Other
446Subsystem ID 08261071h Unknown
447Subsystem Vendor 1071h Mitac
448Address 0 is a Memory Address (64-bit) : 00000000h
449System IRQ 21, INT# B
450New Capabilities List Present:
451 Power Management Capability, Version 1.2
452 Does not support low power State D1 or D2
453 Does not support PME# signalling
454 Current Power State : D3hot (Device off: no power to device, maximum power saving)
455 Vendor-Dependant Capability
456
457Bus 0 (PCI Express), Device Number 31, Device Function 0
458Vendor 8086h Intel Corporation
459Device A306h Q370 Chipset LPC/eSPI Controller
460Command 0007h (I/O Access, Memory Access, BusMaster)
461Status 0200h (Medium Timing)
462Revision 10h, Header Type 80h, Bus Latency Timer 00h
463Self test 00h (Self test not supported)
464PCI Class Bridge, type PCI to ISA
465Subsystem ID 08261071h Unknown
466Subsystem Vendor 1071h Mitac
467
468Bus 0 (PCI Express), Device Number 31, Device Function 4
469Vendor 8086h Intel Corporation
470Device A323h Cannon Lake PCH SMBus Controller
471Command 0003h (I/O Access, Memory Access)
472Status 0280h (Supports Back-To-Back Trans., Medium Timing)
473Revision 10h, Header Type 00h, Bus Latency Timer 00h
474Self test 00h (Self test not supported)
475PCI Class Serial, type SMBus Controller
476Subsystem ID 08261071h Unknown
477Subsystem Vendor 1071h Mitac
478Address 0 is a Memory Address (64-bit) : A1314000h
479Address 2 is not present or not configured!
480Address 3 is not present or not configured!
481Address 4 is an I/O Port : EFA0h
482System IRQ 16, INT# A
483
484Bus 0 (PCI Express), Device Number 31, Device Function 5
485Vendor 8086h Intel Corporation
486Device A324h Cannon Lake PCH SPI Controller
487Command 0402h (Memory Access, Interrupt Disable)
488Status 0000h
489Revision 10h, Header Type 00h, Bus Latency Timer 00h
490Self test 00h (Self test not supported)
491PCI Class Serial, type Other
492Subsystem ID 08261071h Unknown
493Subsystem Vendor 1071h Mitac
494Address 0 is a Memory Address (0-4GiB) : FE010000h
495
496Bus 1 (PCI Express), Device Number 0, Device Function 0
497Vendor 10ECh Realtek Semiconductor Co., Ltd.
498Device 8168h RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
499Command 0007h (I/O Access, Memory Access, BusMaster)
500Status 0010h (Has Capabilities List, Fast Timing)
501Revision 15h, Header Type 00h, Bus Latency Timer 00h
502Self test 00h (Self test not supported)
503Cache line size 64 Bytes (16 DWords)
504PCI Class Network, type Ethernet
505Subsystem ID 012310ECh Unknown
506Subsystem Vendor 10ECh Realtek Semiconductor Co., Ltd.
507Address 0 is an I/O Port : 3000h..30FFh
508Address 1 is not present or not configured!
509Address 2 is a Memory Address (64-bit) : A1204000h..A1204FFFh
510Address 4 is a Memory Address (64-bit) : A1200000h..A1203FFFh
511System IRQ (disabled), INT# A
512New Capabilities List Present:
513 Power Management Capability, Version 1.2
514 Supports low power State D1
515 Supports low power State D2
516 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
517 PME# signalling is currently disabled
518 3.3v AUX Current required : 375 mA
519 Current Power State : D0 (Device operational, no power saving)
520 Message Signalled Interrupt Capability
521 MSI is enabled
522 MSI function can generate 64-bit addresses
523 PCI Express Capability, Version 2
524 Device/Port Type :
525 PCI Express Endpoint Device
526 Device Capabilities :
527 Unsupported Request Severity is Fatal
528 Device Status :
529 Correctable Error Detected
530 Unsupported Request Detected
531 AUX Power Detected
532 Link Capabilities :
533 Maximum Link speed : 2.5Gb/s
534 Maximum Link Width : x1
535 Link Port Number : 0
536 Link Control :
537 Common Clock Configuration In Use
538 Link Status :
539 Current Link speed : 2.5Gb/s
540 Current Link Width : x1
541 MSI-X Capability
542
543Bus 2 (PCI Express), Device Number 0, Device Function 0
544Vendor 14A4h Lite-On Technology Corporation
545Device 21F1h Unknown
546Command 0006h (Memory Access, BusMaster)
547Status 0010h (Has Capabilities List, Fast Timing)
548Revision 01h, Header Type 00h, Bus Latency Timer 00h
549Self test 00h (Self test not supported)
550Cache line size 64 Bytes (16 DWords)
551PCI Class Storage, type Unknown!
552Subsystem ID 10931B4Bh Unknown
553Subsystem Vendor 1B4Bh Marvell Technology Group Ltd.
554Address 0 is a Memory Address (64-bit) : A1110000h..A1113FFFh
555System IRQ (disabled), INT# A
556New Capabilities List Present:
557 Power Management Capability, Version 1.2
558 Does not support low power State D1 or D2
559 Does not support PME# signalling
560 Current Power State : D0 (Device operational, no power saving)
561 Message Signalled Interrupt Capability
562 MSI is enabled
563 MSI function can generate 64-bit addresses
564 PCI Express Capability, Version 2
565 Device/Port Type :
566 PCI Express Endpoint Device
567 Device Capabilities :
568 Unsupported Request Severity is Fatal
569 Device Status :
570 Correctable Error Detected
571 Unsupported Request Detected
572 Link Capabilities :
573 Maximum Link speed : Unknown (03h)!!
574 Maximum Link Width : x4
575 Link Port Number : 0
576 Link Control :
577 Common Clock Configuration In Use
578 Link Status :
579 Current Link speed : Unknown (03)!!
580 Current Link Width : x4
581 MSI-X Capability
582
583Bus 3 (PCI Express), Device Number 0, Device Function 0
584Vendor 104Ch Texas Instruments
585Device 8241h TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller
586Command 0006h (Memory Access, BusMaster)
587Status 0010h (Has Capabilities List, Fast Timing)
588Revision 02h, Header Type 00h, Bus Latency Timer 00h
589Self test 00h (Self test not supported)
590Cache line size 64 Bytes (16 DWords)
591PCI Class Serial, type USB (UHCI), programming interface 30
592Address 0 is a Memory Address (64-bit) : A1000000h..A100FFFFh
593Address 2 is a Memory Address (64-bit) : A1010000h..A1011FFFh
594System IRQ (disabled), INT# A
595New Capabilities List Present:
596 Power Management Capability, Version 1.2
597 Supports low power State D1
598 Supports low power State D2
599 Supports PME# signalling from mode(s) D0, D1, D2, D3hot
600 PME# signalling is currently disabled
601 3.3v AUX Current required : 0 mA (Self powered)
602 Current Power State : D0 (Device operational, no power saving)
603 Message Signalled Interrupt Capability
604 MSI is enabled
605 MSI function can generate 64-bit addresses
606 PCI Express Capability, Version 2
607 Device/Port Type :
608 PCI Express Endpoint Device
609 Device Capabilities :
610 Unsupported Request Severity is Fatal
611 Device Status :
612 Correctable Error Detected
613 Unsupported Request Detected
614 Link Capabilities :
615 Maximum Link speed : Unknown (02h)!!
616 Maximum Link Width : x1
617 Link Port Number : 0
618 Link Control :
619 Common Clock Configuration In Use
620 Link Status :
621 Current Link speed : 2.5Gb/s
622 Current Link Width : x1
623 MSI-X Capability
624