Ticket #53: device.txt

File device.txt, 15.6 KB (added by Minkwitz, 11 years ago)

list of pciscan

Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43"
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 6
6PCI Characteristics  : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2570h 82865G/PE/P DRAM Controller/Host-Hub Interface
13 Command 0106h (Memory Access, BusMaster, System Errors)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15   Received Master Abort, Fast Timing)
16 Revision 02h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 12BC103Ch d330 uT
20 Subsystem Vendor 103Ch Hewlett-Packard Company
21 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F4000000h
22 New Capabilities List Present:
23   Vendor-Dependant Capability
24   AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
25     AGP Speed(s) Supported : 4x 8x
26     FW Transfers Supported : Yes
27     >4GiB Address Space Supported : No
28     Sideband Addressing Supported : Yes
29     AGP v3.0 Operation Mode Available : Yes
30     Isosynchronous Transactions Supported : No
31     Maximum Command Queue Length : 32 bytes
32     AGP Speed Selected : 8x
33     FW Transfers Enabled : No
34     >4GiB Address Space Enabled : No
35     AGP Enabled : Yes
36     Sideband Addressing Enabled : Yes
37     AGP v3.0 Operation Mode : Enabled
38     Current Command Queue Length : 1 byte
39
40 Bus 0 (PCI), Device Number 1, Device Function 0
41 Vendor 8086h Intel Corporation
42 Device 2571h 82865G/PE/P PCI to AGP Controller
43 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
44 Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
45 Revision 02h, Header Type 01h, Bus Latency Timer 40h
46 Self test 00h (Self test not supported)
47 PCI Class Bridge, type PCI to PCI
48 PCI Bridge Information:
49   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
50   Secondary Bus Command 0008h (VGA mapping)
51   Secondary Bus Status  22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
52     Received Master Abort, Medium Timing)
53   Secondary Bus Latency 20h
54   I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
55   Memory   Range Passed to Secondary Bus : F0500000h..F07FFFFFh
56   Prefetchable Memory Range Passed to Secondary Bus : D0000000h..F01FFFFFh
57
58 Bus 0 (PCI), Device Number 29, Device Function 0
59 Vendor 8086h Intel Corporation
60 Device 24D2h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
61 Command 0005h (I/O Access, BusMaster)
62 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
63 Revision 02h, Header Type 80h, Bus Latency Timer 00h
64 Self test 00h (Self test not supported)
65 PCI Class Serial, type USB (UHCI)
66 Subsystem ID 12BC103Ch d530 CMT (DG746A)
67 Subsystem Vendor 103Ch Hewlett-Packard Company
68 Address 0 is not present or not configured!
69 Address 1 is not present or not configured!
70 Address 2 is not present or not configured!
71 Address 3 is not present or not configured!
72 Address 4 is an I/O Port : 3440h..3453h
73 System IRQ 10, INT# A
74
75 Bus 0 (PCI), Device Number 29, Device Function 1
76 Vendor 8086h Intel Corporation
77 Device 24D4h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
78 Command 0005h (I/O Access, BusMaster)
79 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
80 Revision 02h, Header Type 00h, Bus Latency Timer 00h
81 Self test 00h (Self test not supported)
82 PCI Class Serial, type USB (UHCI)
83 Subsystem ID 12BC103Ch d530 CMT (DG746A)
84 Subsystem Vendor 103Ch Hewlett-Packard Company
85 Address 0 is not present or not configured!
86 Address 1 is not present or not configured!
87 Address 2 is not present or not configured!
88 Address 3 is not present or not configured!
89 Address 4 is an I/O Port : 3460h..3473h
90 System IRQ 11, INT# B
91
92 Bus 0 (PCI), Device Number 29, Device Function 2
93 Vendor 8086h Intel Corporation
94 Device 24D7h 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
95 Command 0005h (I/O Access, BusMaster)
96 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
97 Revision 02h, Header Type 00h, Bus Latency Timer 00h
98 Self test 00h (Self test not supported)
99 PCI Class Serial, type USB (UHCI)
100 Subsystem ID 12BC103Ch d530 CMT (DG746A)
101 Subsystem Vendor 103Ch Hewlett-Packard Company
102 Address 0 is not present or not configured!
103 Address 1 is not present or not configured!
104 Address 2 is not present or not configured!
105 Address 3 is not present or not configured!
106 Address 4 is an I/O Port : 3480h..3493h
107 System IRQ 10, INT# C
108
109 Bus 0 (PCI), Device Number 29, Device Function 7
110 Vendor 8086h Intel Corporation
111 Device 24DDh 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
112 Command 0106h (Memory Access, BusMaster, System Errors)
113 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
114   Medium Timing)
115 Revision 02h, Header Type 00h, Bus Latency Timer 00h
116 Self test 00h (Self test not supported)
117 PCI Class Serial, type USB 2.0 (EHCI)
118 Subsystem ID 12BC103Ch d530 CMT (DG746A)
119 Subsystem Vendor 103Ch Hewlett-Packard Company
120 Address 0 is a Memory Address (0-4GiB) : F0A00000h..F0A000FFh
121 System IRQ 10, INT# D
122 New Capabilities List Present:
123   Power Management Capability, Version 1.1
124     Does not support low power State D1 or D2
125     Supports PME# signalling from mode(s) D0, D3hot, D3cold
126     PME# signalling is currently disabled
127     3.3v AUX Current required : 375 mA
128     Current Power State : D0 (Device operational, no power saving)
129   USB 2.0 EHCI Debug Port Capability
130
131 Bus 0 (PCI), Device Number 30, Device Function 0
132 Vendor 8086h Intel Corporation
133 Device 244Eh 82801 PCI Bridge
134 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
135 Status 0080h (Supports Back-To-Back Trans., Fast Timing)
136 Revision C2h, Header Type 01h, Bus Latency Timer 00h
137 Self test 00h (Self test not supported)
138 PCI Class Bridge, type PCI to PCI
139 PCI Bridge Information:
140   Primary Bus Number 0, Secondary Bus Number 5, Subordinate Bus number 5
141   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
142   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
143     Received Master Abort, Medium Timing)
144   Secondary Bus Latency 40h
145   I/O Port Range Passed to Secondary Bus : 1000h..1FFFh (16-bit)
146   Memory   Range Passed to Secondary Bus : F0200000h..F04FFFFFh
147   Prefetchable Memory Range Passed to Secondary Bus : None
148
149 Bus 0 (PCI), Device Number 31, Device Function 0
150 Vendor 8086h Intel Corporation
151 Device 24D0h 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
152 Command 010Fh (I/O Access, Memory Access, BusMaster, Special Cycles,
153   System Errors)
154 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
155 Revision 02h, Header Type 80h, Bus Latency Timer 00h
156 Self test 00h (Self test not supported)
157 PCI Class Bridge, type PCI to ISA
158
159 Bus 0 (PCI), Device Number 31, Device Function 1
160 Vendor 8086h Intel Corporation
161 Device 24DBh 82801EB/ER (ICH5/ICH5R) IDE Controller
162 Command 0007h (I/O Access, Memory Access, BusMaster)
163 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
164   Medium Timing)
165 Revision 02h, Header Type 00h, Bus Latency Timer 00h
166 Self test 00h (Self test not supported)
167 PCI Class Storage, type IDE (ATA)
168 PCI EIDE Controller Features :
169   BusMaster EIDE is supported
170   Primary   Channel is at I/O Port 01F0h and IRQ 14
171   Secondary Channel is at I/O Port 0170h and IRQ 15
172 Subsystem ID 12BC103Ch d530 CMT (DG746A)
173 Subsystem Vendor 103Ch Hewlett-Packard Company
174 Address 0 is an I/O Port : 34E0h
175 Address 1 is an I/O Port : 3800h
176 Address 2 is an I/O Port : 34E8h
177 Address 3 is an I/O Port : 3804h
178 Address 4 is an I/O Port : 34C0h
179 System IRQ 10, INT# A
180
181 Bus 0 (PCI), Device Number 31, Device Function 2
182 Vendor 8086h Intel Corporation
183 Device 24D1h 82801EB (ICH5) SATA Controller
184 Command 0005h (I/O Access, BusMaster)
185 Status 02A0h (Supports 66MHz, Supports Back-To-Back Trans., Medium Timing)
186 Revision 02h, Header Type 00h, Bus Latency Timer 00h
187 Self test 00h (Self test not supported)
188 PCI Class Storage, type IDE (ATA)
189 PCI EIDE Controller Features :
190   BusMaster EIDE is supported
191   Primary   Channel is in native mode at Addresses 0 & 1
192   Secondary Channel is in native mode at Addresses 2 & 3
193 Subsystem ID 12BC103Ch d530 CMT (DG746A)
194 Subsystem Vendor 103Ch Hewlett-Packard Company
195 Address 0 is an I/O Port : 34F0h..34F7h
196 Address 1 is an I/O Port : 3808h
197 Address 2 is an I/O Port : 34F8h..34FFh
198 Address 3 is an I/O Port : 380Ch
199 Address 4 is an I/O Port : 34D0h..34D7h
200 System IRQ 10, INT# A
201
202 Bus 0 (PCI), Device Number 31, Device Function 5
203 Vendor 8086h Intel Corporation
204 Device 24D5h 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
205 Command 0007h (I/O Access, Memory Access, BusMaster)
206 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
207   Medium Timing)
208 Revision 02h, Header Type 00h, Bus Latency Timer 00h
209 Self test 00h (Self test not supported)
210 PCI Class Multimedia, type Audio
211 Subsystem ID 12BC103Ch d330 uT
212 Subsystem Vendor 103Ch Hewlett-Packard Company
213 Address 0 is an I/O Port : 3000h..30FFh
214 Address 1 is an I/O Port : 3400h..343Fh
215 Address 2 is a Memory Address (0-4GiB) : F0A00400h..F0A005FFh
216 Address 3 is a Memory Address (0-4GiB) : F0A00600h..F0A006FFh
217 System IRQ 5, INT# B
218 New Capabilities List Present:
219   Power Management Capability, Version 1.1
220     Does not support low power State D1 or D2
221     Supports PME# signalling from mode(s) D0, D3hot, D3cold
222     PME# signalling is currently disabled
223     3.3v AUX Current required : 375 mA
224     Current Power State : D0 (Device operational, no power saving)
225
226 Bus 1 (AGP), Device Number 0, Device Function 0
227 Vendor 1002h ATI Technologies Inc
228 Device 4152h RV350 AR [Radeon 9600]
229 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
230 Status 02B0h (Has Capabilities List, Supports 66MHz,
231   Supports Back-To-Back Trans., Medium Timing)
232 Revision 00h, Header Type 80h, Bus Latency Timer 42h
233 Minimum Bus Grant 08h, Maximum Bus Latency 00h
234 Self test 00h (Self test not supported)
235 Cache line size 64 Bytes (16 DWords)
236 PCI Class Display, type VGA
237 Subsystem ID 41521787h Radeon 9600 XT (Guess Only!)
238 Subsystem Vendor 1787h Hightech Information System Ltd.
239 Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h
240 Address 1 is an I/O Port : 2000h
241 Address 2 is a Memory Address (0-4GiB) : F0500000h
242 System IRQ 10, INT# A
243 Expansion ROM of 128 KiB decoded by this card, currently disabled
244 New Capabilities List Present:
245   AGP Capability, Version 3.0 (AGP 8x and 4x, core register support)
246     AGP Speed(s) Supported : 4x 8x
247     FW Transfers Supported : Yes
248     >4GiB Address Space Supported : No
249     Sideband Addressing Supported : Yes
250     AGP v3.0 Operation Mode Available : Yes
251     Isosynchronous Transactions Supported : No
252     Maximum Command Queue Length : 256 bytes
253     AGP Speed Selected : 8x
254     FW Transfers Enabled : No
255     >4GiB Address Space Enabled : No
256     AGP Enabled : Yes
257     Sideband Addressing Enabled : Yes
258     AGP v3.0 Operation Mode : Enabled
259     Current Command Queue Length : 1 byte
260   Power Management Capability, Version 1.1
261     Supports low power State D1
262     Supports low power State D2
263     Does not support PME# signalling
264     Current Power State : D0 (Device operational, no power saving)
265
266 Bus 1 (AGP), Device Number 0, Device Function 1
267 Vendor 1002h ATI Technologies Inc
268 Device 4172h RV350 AR [Radeon 9600] (Secondary)
269 Command 0007h (I/O Access, Memory Access, BusMaster)
270 Status 02B0h (Has Capabilities List, Supports 66MHz,
271   Supports Back-To-Back Trans., Medium Timing)
272 Revision 00h, Header Type 00h, Bus Latency Timer 42h
273 Minimum Bus Grant 08h, Maximum Bus Latency 00h
274 Self test 00h (Self test not supported)
275 Cache line size 64 Bytes (16 DWords)
276 PCI Class Display, type Other
277 Subsystem ID 41531787h Radeon 9600 XT (Secondary) (Guess Only!)
278 Subsystem Vendor 1787h Hightech Information System Ltd.
279 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E0000000h
280 Address 1 is a Memory Address (0-4GiB) : F0510000h
281 New Capabilities List Present:
282   Power Management Capability, Version 1.1
283     Supports low power State D1
284     Supports low power State D2
285     Does not support PME# signalling
286     Current Power State : D0 (Device operational, no power saving)
287
288 Bus 5 (PCI), Device Number 2, Device Function 0
289 Vendor 14E4h Broadcom Corporation
290 Device 1696h NetXtreme BCM5782 Gigabit Ethernet
291 Command 0106h (Memory Access, BusMaster, System Errors)
292 Status 02B0h (Has Capabilities List, Supports 66MHz,
293   Supports Back-To-Back Trans., Medium Timing)
294 Revision 03h, Header Type 00h, Bus Latency Timer 40h
295 Minimum Bus Grant 40h, Maximum Bus Latency 00h
296 Self test 00h (Self test not supported)
297 Cache line size 64 Bytes (16 DWords)
298 PCI Class Network, type Ethernet
299 Subsystem ID 12BC103Ch d530 CMT (DG746A)
300 Subsystem Vendor 103Ch Hewlett-Packard Company
301 Address 0 is a Memory Address (64-bit) : F0400000h
302 CIS can read from expansion ROM image 0, offset 00h
303 System IRQ 5, INT# A
304 New Capabilities List Present:
305   Power Management Capability, Version 1.1
306     Does not support low power State D1 or D2
307     Supports PME# signalling from mode(s) D3hot, D3cold
308     PME# signalling is currently disabled
309     3.3v AUX Current required : 0 mA (Self powered)
310     Current Power State : D0 (Device operational, no power saving)
311     10000 mW D0 power consume
312     10000 mW D0 power dissipate
313         0 mW D1 power consume
314         0 mW D1 power dissipate
315         0 mW D2 power consume
316         0 mW D2 power dissipate
317      1000 mW D3 power consume
318      1000 mW D3 power dissipate
319         0 mW common logic power consume
320   Vital Product Data Capability
321     Identifier          Broadcom NetXtreme Gigabit Ethernet Controller
322     Part Number         BCM95782A50
323     EC Level (Version)  106679-15
324     Serial Number       0123456789
325     Manufacturer ID     14e4
326     Checksum/End        7Dh 25*00h
327     System Specific     XYZ01234567
328     Remaining RW Area   107*00h
329     End Tag
330   Message Signalled Interrupt Capability
331     MSI is disabled
332     MSI function can generate 64-bit addresses
333
334 Bus 5 (PCI), Device Number 10, Device Function 0
335 Vendor 9004h Adaptec
336 Device 8178h AHA-2940U/UW/D / AIC-7881U
337 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
338 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
339   Medium Timing)
340 Revision 01h, Header Type 00h, Bus Latency Timer 40h
341 Minimum Bus Grant 08h, Maximum Bus Latency 08h
342 Self test 00h (Self test not supported)
343 Cache line size 64 Bytes (16 DWords)
344 PCI Class Storage, type SCSI
345 Subsystem ID 78819004h AHA-2940UW SCSI Host Adapter
346 Subsystem Vendor 9004h Adaptec
347 Address 0 is an I/O Port : 1000h..100Fh
348 Address 1 is a Memory Address (0-4GiB) : F0410000h
349 System IRQ 10, INT# A
350 Expansion ROM of 64 KiB decoded by this card, currently disabled
351 New Capabilities List Present:
352   Power Management Capability, Version 1.0
353     Does not support low power State D1 or D2
354     Does not support PME# signalling
355     Current Power State : D0 (Device operational, no power saving)
356
357ROM PCI IRQ routing table Tests....
358 ROM IRQ routing table found at F000h:54F0h
359 Table Version 1.0 - OK
360 Table size 192 bytes - OK
361 Table Checksum CDh - OK
362 PCI Interrupt Router: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
363 IRQ's dedicated to PCI : None
364 The ROM PCI IRQ routing table appears to be OK.
365
366IRQ Summary: IRQs 5,10,11,14,15 are used by PCI devices
367Shared IRQs: IRQ 5 is shared by 2 PCI Devices
368             IRQ 10 is shared by 7 PCI Devices