Ticket #10: pci.log

File pci.log, 25.2 KB (added by Anchieri, 12 years ago)

Information on my PC from PCI.EXE

Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version ha_merged, 12 Apr 2010 08:07:06"
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 5
6PCI Characteristics  : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI Express), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2770h 82945G/GZ/P/PL Memory Controller Hub
13 Command 0006h (Memory Access, BusMaster)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15   Received Master Abort, Fast Timing)
16 Revision 02h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 817A1043h P5LD2-VM Mainboard
20 Subsystem Vendor 1043h ASUSTeK Computer Inc.
21 New Capabilities List Present:
22   Vendor-Dependant Capability
23
24 Bus 0 (PCI Express), Device Number 1, Device Function 0
25 Vendor 8086h Intel Corporation
26 Device 2771h 82945G/GZ/P/PL PCI Express Root Port
27 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
28 Status 0010h (Has Capabilities List, Fast Timing)
29 Revision 02h, Header Type 01h, Bus Latency Timer 00h
30 Self test 00h (Self test not supported)
31 Cache line size 16 Bytes (4 DWords)
32 PCI Class Bridge, type PCI to PCI
33 Subsystem ID 817A1043h Unknown
34 Subsystem Vendor 1043h ASUSTeK Computer Inc.
35 System IRQ 11, INT# A
36 PCI Bridge Information:
37   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
38   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
39   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
40   Secondary Bus Latency 00h
41   I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit)
42   Memory   Range Passed to Secondary Bus : BC000000h..BFFFFFFFh
43   Prefetchable Memory Range Passed to Secondary Bus : C0000000h..EFFFFFFFh
44 New Capabilities List Present:
45   Subsystem ID & Subsystem Vendor ID Capability
46     SSVID : 1043h
47     SSID  : 817Ah
48   Power Management Capability, Version 1.1
49     Does not support low power State D1 or D2
50     Supports PME# signalling from mode(s) D0, D3hot, D3cold
51     PME# signalling is currently disabled
52     3.3v AUX Current required : 0 mA (Self powered)
53     Current Power State : D0 (Device operational, no power saving)
54   Message Signalled Interrupt Capability
55     MSI is disabled
56     MSI function can generate 32-bit addresses
57   PCI Express Capability, Version 1
58     Device/Port Type :
59       Root port of PCI Express Root Complex
60     Port Type :
61       Port is an Expansion Slot
62       Unsupported Request Severity is Non-Fatal
63     Device Status :
64     Link Capabilities :
65       Maximum Link speed : 2.5Gb/s
66       Maximum Link Width : x16
67       Link Port Number   : 2
68     Link Control :
69       Common Clock Configuration In Use
70     Link Status :
71       Current Link speed : 2.5Gb/s
72       Current Link Width : x16
73     Slot Capabilities :
74       Slot Power Limit Value :   4.000 Watts
75       Physical slot Number 0
76
77 Bus 0 (PCI Express), Device Number 27, Device Function 0
78 Vendor 8086h Intel Corporation
79 Device 27D8h N10/ICH 7 Family High Definition Audio Controller
80 Command 0006h (Memory Access, BusMaster)
81 Status 0010h (Has Capabilities List, Fast Timing)
82 Revision 01h, Header Type 00h, Bus Latency Timer 00h
83 Self test 00h (Self test not supported)
84 Cache line size 16 Bytes (4 DWords)
85 PCI Class Multimedia, type Unknown!
86 Subsystem ID 82901043h P5KPL-VM Motherboard
87 Subsystem Vendor 1043h ASUSTeK Computer Inc.
88 Address 0 is a Memory Address (64-bit) : BBDF8000h..BBDFBFFFh
89 System IRQ 19, INT# A
90 New Capabilities List Present:
91   Power Management Capability, Version 1.1
92     Does not support low power State D1 or D2
93     Supports PME# signalling from mode(s) D0, D3hot, D3cold
94     PME# signalling is currently disabled
95     3.3v AUX Current required : 55 mA
96     Current Power State : D0 (Device operational, no power saving)
97   Message Signalled Interrupt Capability
98     MSI is disabled
99     MSI function can generate 64-bit addresses
100   PCI Express Capability, Version 1
101     Device/Port Type :
102       Root Complex Integrated Endpoint Device
103       Unsupported Request Severity is Non-Fatal
104     Device Status :
105       AUX Power Detected
106     Link Capabilities :
107       Maximum Link speed : Unknown (00h)!!
108       Maximum Link Width : xReserved
109       Link Port Number   : 0
110     Link Control :
111       Asynchronous Clocking in Use
112     Link Status :
113       Current Link speed : Unknown (00)!!
114       Current Link Width : x0
115
116 Bus 0 (PCI Express), Device Number 28, Device Function 0
117 Vendor 8086h Intel Corporation
118 Device 27D0h N10/ICH 7 Family PCI Express Port 1
119 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
120 Status 0010h (Has Capabilities List, Fast Timing)
121 Revision 01h, Header Type 81h, Bus Latency Timer 00h
122 Self test 00h (Self test not supported)
123 Cache line size 16 Bytes (4 DWords)
124 PCI Class Bridge, type PCI to PCI
125 Subsystem ID 81791043h Unknown
126 Subsystem Vendor 1043h ASUSTeK Computer Inc.
127 System IRQ 11, INT# A
128 PCI Bridge Information:
129   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
130   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
131   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
132   Secondary Bus Latency 00h
133   I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit)
134   Memory   Range Passed to Secondary Bus : None
135   Prefetchable Memory Range Passed to Secondary Bus : None
136 New Capabilities List Present:
137   PCI Express Capability, Version 1
138     Device/Port Type :
139       Root port of PCI Express Root Complex
140     Port Type :
141       Port is an Expansion Slot
142       Unsupported Request Severity is Non-Fatal
143     Device Status :
144       AUX Power Detected
145     Link Capabilities :
146       Maximum Link speed : 2.5Gb/s
147       Maximum Link Width : x1
148       Link Port Number   : 1
149     Link Control :
150       Common Clock Configuration In Use
151     Link Status :
152       Current Link speed : 2.5Gb/s
153       Current Link Width : x0
154     Slot Capabilities :
155       Hot Plug Surprise is Possible
156       Hot Plug Capable
157       Slot Power Limit Value :   2.000 Watts
158       Physical slot Number 0
159   Message Signalled Interrupt Capability
160     MSI is disabled
161     MSI function can generate 32-bit addresses
162   Subsystem ID & Subsystem Vendor ID Capability
163     SSVID : 1043h
164     SSID  : 8179h
165   Power Management Capability, Version 1.1
166     Does not support low power State D1 or D2
167     Supports PME# signalling from mode(s) D0, D3hot, D3cold
168     PME# signalling is currently disabled
169     3.3v AUX Current required : 0 mA (Self powered)
170     Current Power State : D0 (Device operational, no power saving)
171
172 Bus 0 (PCI Express), Device Number 28, Device Function 1
173 Vendor 8086h Intel Corporation
174 Device 27D2h N10/ICH 7 Family PCI Express Port 2
175 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
176 Status 0010h (Has Capabilities List, Fast Timing)
177 Revision 01h, Header Type 81h, Bus Latency Timer 00h
178 Self test 00h (Self test not supported)
179 Cache line size 16 Bytes (4 DWords)
180 PCI Class Bridge, type PCI to PCI
181 Subsystem ID 81791043h Unknown
182 Subsystem Vendor 1043h ASUSTeK Computer Inc.
183 System IRQ 10, INT# B
184 PCI Bridge Information:
185   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
186   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
187   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
188   Secondary Bus Latency 00h
189   I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
190   Memory   Range Passed to Secondary Bus : BBF00000h..BBFFFFFFh
191   Prefetchable Memory Range Passed to Secondary Bus : None
192 New Capabilities List Present:
193   PCI Express Capability, Version 1
194     Device/Port Type :
195       Root port of PCI Express Root Complex
196     Port Type :
197       Port is an Expansion Slot
198       Unsupported Request Severity is Non-Fatal
199     Device Status :
200       AUX Power Detected
201     Link Capabilities :
202       Maximum Link speed : 2.5Gb/s
203       Maximum Link Width : x1
204       Link Port Number   : 2
205     Link Control :
206       Common Clock Configuration In Use
207     Link Status :
208       Current Link speed : 2.5Gb/s
209       Current Link Width : x1
210     Slot Capabilities :
211       Hot Plug Surprise is Possible
212       Hot Plug Capable
213       Slot Power Limit Value :   4.000 Watts
214       Physical slot Number 0
215   Message Signalled Interrupt Capability
216     MSI is disabled
217     MSI function can generate 32-bit addresses
218   Subsystem ID & Subsystem Vendor ID Capability
219     SSVID : 1043h
220     SSID  : 8179h
221   Power Management Capability, Version 1.1
222     Does not support low power State D1 or D2
223     Supports PME# signalling from mode(s) D0, D3hot, D3cold
224     PME# signalling is currently disabled
225     3.3v AUX Current required : 0 mA (Self powered)
226     Current Power State : D0 (Device operational, no power saving)
227
228 Bus 0 (PCI Express), Device Number 29, Device Function 0
229 Vendor 8086h Intel Corporation
230 Device 27C8h N10/ICH7 Family USB UHCI Controller #1
231 Command 0005h (I/O Access, BusMaster)
232 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
233 Revision 01h, Header Type 80h, Bus Latency Timer 00h
234 Self test 00h (Self test not supported)
235 PCI Class Serial, type USB (UHCI)
236 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
237 Subsystem Vendor 1043h ASUSTeK Computer Inc.
238 Address 0 is not present or not configured!
239 Address 1 is not present or not configured!
240 Address 2 is not present or not configured!
241 Address 3 is not present or not configured!
242 Address 4 is an I/O Port : 8000h..8013h
243 System IRQ 20, INT# A
244
245 Bus 0 (PCI Express), Device Number 29, Device Function 1
246 Vendor 8086h Intel Corporation
247 Device 27C9h N10/ICH 7 Family USB UHCI Controller #2
248 Command 0005h (I/O Access, BusMaster)
249 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
250 Revision 01h, Header Type 00h, Bus Latency Timer 00h
251 Self test 00h (Self test not supported)
252 PCI Class Serial, type USB (UHCI)
253 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
254 Subsystem Vendor 1043h ASUSTeK Computer Inc.
255 Address 0 is not present or not configured!
256 Address 1 is not present or not configured!
257 Address 2 is not present or not configured!
258 Address 3 is not present or not configured!
259 Address 4 is an I/O Port : 8400h..8413h
260 System IRQ 17, INT# B
261
262 Bus 0 (PCI Express), Device Number 29, Device Function 2
263 Vendor 8086h Intel Corporation
264 Device 27CAh N10/ICH 7 Family USB UHCI Controller #3
265 Command 0005h (I/O Access, BusMaster)
266 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
267 Revision 01h, Header Type 00h, Bus Latency Timer 00h
268 Self test 00h (Self test not supported)
269 PCI Class Serial, type USB (UHCI)
270 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
271 Subsystem Vendor 1043h ASUSTeK Computer Inc.
272 Address 0 is not present or not configured!
273 Address 1 is not present or not configured!
274 Address 2 is not present or not configured!
275 Address 3 is not present or not configured!
276 Address 4 is an I/O Port : 8800h..8813h
277 System IRQ 18, INT# C
278
279 Bus 0 (PCI Express), Device Number 29, Device Function 3
280 Vendor 8086h Intel Corporation
281 Device 27CBh N10/ICH 7 Family USB UHCI Controller #4
282 Command 0005h (I/O Access, BusMaster)
283 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
284 Revision 01h, Header Type 00h, Bus Latency Timer 00h
285 Self test 00h (Self test not supported)
286 PCI Class Serial, type USB (UHCI)
287 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
288 Subsystem Vendor 1043h ASUSTeK Computer Inc.
289 Address 0 is not present or not configured!
290 Address 1 is not present or not configured!
291 Address 2 is not present or not configured!
292 Address 3 is not present or not configured!
293 Address 4 is an I/O Port : 9000h..9013h
294 System IRQ 19, INT# D
295
296 Bus 0 (PCI Express), Device Number 29, Device Function 7
297 Vendor 8086h Intel Corporation
298 Device 27CCh N10/ICH 7 Family USB2 EHCI Controller
299 Command 0006h (Memory Access, BusMaster)
300 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
301   Medium Timing)
302 Revision 01h, Header Type 00h, Bus Latency Timer 00h
303 Self test 00h (Self test not supported)
304 PCI Class Serial, type USB 2.0 (EHCI)
305 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
306 Subsystem Vendor 1043h ASUSTeK Computer Inc.
307 Address 0 is a Memory Address (0-4GiB) : BBDFFC00h..BBDFFC93h
308 System IRQ 20, INT# A
309 New Capabilities List Present:
310   Power Management Capability, Version 1.1
311     Does not support low power State D1 or D2
312     Supports PME# signalling from mode(s) D0, D3hot, D3cold
313     PME# signalling is currently disabled
314     3.3v AUX Current required : 375 mA
315     Current Power State : D0 (Device operational, no power saving)
316   USB 2.0 EHCI Debug Port Capability
317
318 Bus 0 (PCI Express), Device Number 30, Device Function 0
319 Vendor 8086h Intel Corporation
320 Device 244Eh 82801 PCI Bridge
321 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
322 Status 0010h (Has Capabilities List, Fast Timing)
323 Revision E1h, Header Type 01h, Bus Latency Timer 00h
324 Self test 00h (Self test not supported)
325 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
326 Subsystem ID 81791043h Unknown
327 Subsystem Vendor 1043h ASUSTeK Computer Inc.
328 PCI Bridge Information:
329   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
330   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
331   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
332     Received Master Abort, Medium Timing)
333   Secondary Bus Latency 20h
334   I/O Port Range Passed to Secondary Bus : B000h..BFFFh (16-bit)
335   Memory   Range Passed to Secondary Bus : BBE00000h..BBEFFFFFh
336   Prefetchable Memory Range Passed to Secondary Bus : None
337 New Capabilities List Present:
338   Subsystem ID & Subsystem Vendor ID Capability
339     SSVID : 1043h
340     SSID  : 8179h
341
342 Bus 0 (PCI Express), Device Number 31, Device Function 0
343 Vendor 8086h Intel Corporation
344 Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Bridge
345 Command 0007h (I/O Access, Memory Access, BusMaster)
346 Status 0210h (Has Capabilities List, Medium Timing)
347 Revision 01h, Header Type 80h, Bus Latency Timer 00h
348 Self test 00h (Self test not supported)
349 PCI Class Bridge, type PCI to ISA
350 Subsystem ID 81791043h P5KPL-VM Motherboard
351 Subsystem Vendor 1043h ASUSTeK Computer Inc.
352 New Capabilities List Present:
353   Vendor-Dependant Capability
354
355 Bus 0 (PCI Express), Device Number 31, Device Function 1
356 Vendor 8086h Intel Corporation
357 Device 27DFh 82801G (ICH7 Family) IDE Controller
358 Command 0005h (I/O Access, BusMaster)
359 Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
360   Medium Timing)
361 Revision 01h, Header Type 00h, Bus Latency Timer 00h
362 Self test 00h (Self test not supported)
363 PCI Class Storage, type IDE (ATA)
364 PCI EIDE Controller Features :
365   BusMaster EIDE is supported
366   Primary   Channel is at I/O Port 01F0h and IRQ 14
367   Secondary Channel is at I/O Port 0170h and IRQ 15
368 Subsystem ID 81791043h P5KPL-VM Motherboard
369 Subsystem Vendor 1043h ASUSTeK Computer Inc.
370 Address 0 is an I/O Port : 0000h (unconfigured)
371 Address 1 is an I/O Port : 0000h (unconfigured)
372 Address 2 is an I/O Port : 0000h (unconfigured)
373 Address 3 is an I/O Port : 0000h (unconfigured)
374 Address 4 is an I/O Port : FFA0h..FFA7h
375 System IRQ 22, INT# A
376
377 Bus 0 (PCI Express), Device Number 31, Device Function 2
378 Vendor 8086h Intel Corporation
379 Device 27C0h N10/ICH7 Family SATA IDE Controller
380 Command 0005h (I/O Access, BusMaster)
381 Status 02B0h (Has Capabilities List, Supports 66MHz,
382   Supports Back-To-Back Trans., Medium Timing)
383 Revision 01h, Header Type 00h, Bus Latency Timer 00h
384 Self test 00h (Self test not supported)
385 PCI Class Storage, type IDE (ATA)
386 PCI EIDE Controller Features :
387   BusMaster EIDE is supported
388   Primary   Channel is in native mode at Addresses 0 & 1
389   Secondary Channel is in native mode at Addresses 2 & 3
390 Subsystem ID 26011043h P5KPL-VM Motherboard (Guess Only!)
391 Subsystem Vendor 1043h ASUSTeK Computer Inc.
392 Address 0 is an I/O Port : A800h..A807h
393 Address 1 is an I/O Port : A400h
394 Address 2 is an I/O Port : A000h..A007h
395 Address 3 is an I/O Port : 9800h
396 Address 4 is an I/O Port : 9400h..9407h
397 System IRQ 23, INT# B
398 New Capabilities List Present:
399   Power Management Capability, Version 1.1
400     Does not support low power State D1 or D2
401     Supports PME# signalling from mode(s) D3hot
402     PME# signalling is currently disabled
403     3.3v AUX Current required : 0 mA (Self powered)
404     Current Power State : D0 (Device operational, no power saving)
405
406 Bus 0 (PCI Express), Device Number 31, Device Function 3
407 Vendor 8086h Intel Corporation
408 Device 27DAh N10/ICH 7 Family SMBus Controller
409 Command 0001h (I/O Access)
410 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
411 Revision 01h, Header Type 00h, Bus Latency Timer 00h
412 Self test 00h (Self test not supported)
413 PCI Class Serial, type SMBus Controller
414 Subsystem ID 81791043h P5KPL-VM Motherboard
415 Subsystem Vendor 1043h ASUSTeK Computer Inc.
416 Address 0 is not present or not configured!
417 Address 1 is not present or not configured!
418 Address 2 is not present or not configured!
419 Address 3 is not present or not configured!
420 Address 4 is an I/O Port : 0400h
421 System IRQ 23, INT# B
422
423 Bus 1 (PCI), Device Number 0, Device Function 0
424 Vendor 1186h D-Link System Inc
425 Device 1300h RTL8139 Ethernet
426 Command 0007h (I/O Access, Memory Access, BusMaster)
427 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
428   Medium Timing)
429 Revision 10h, Header Type 00h, Bus Latency Timer 40h
430 Minimum Bus Grant 20h, Maximum Bus Latency 40h
431 Self test 00h (Self test not supported)
432 PCI Class Network, type Ethernet
433 Subsystem ID 13001186h DFE-538TX 10/100 Ethernet Adapter (Generic ID)
434 Subsystem Vendor 1186h D-Link System Inc
435 Address 0 is an I/O Port : B800h..B8FFh
436 Address 1 is a Memory Address (0-4GiB) : BBEFF800h
437 System IRQ 17, INT# A
438 New Capabilities List Present:
439   Power Management Capability, Version 1.1
440     Supports low power State D1
441     Supports low power State D2
442     Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold
443     PME# signalling is currently disabled
444     3.3v AUX Current required : 375 mA
445     Current Power State : D0 (Device operational, no power saving)
446   Vital Product Data Capability
447     VPD Data not present
448
449 Bus 1 (PCI), Device Number 1, Device Function 0
450 Vendor 1033h NEC Corporation
451 Device 0035h USB
452 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
453 Status 0210h (Has Capabilities List, Medium Timing)
454 Revision 43h, Header Type 80h, Bus Latency Timer 40h
455 Minimum Bus Grant 01h, Maximum Bus Latency 2Ah
456 Self test 00h (Self test not supported)
457 Cache line size 16 Bytes (4 DWords)
458 PCI Class Serial, type USB (OHCI)
459 Subsystem ID 00351186h Unknown
460 Subsystem Vendor 1186h D-Link System Inc
461 Address 0 is a Memory Address (0-4GiB) : BBEFD000h..BBEFDFFFh
462 System IRQ 21, INT# A
463 New Capabilities List Present:
464   Power Management Capability, Version 1.1
465     Supports low power State D1
466     Supports low power State D2
467     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
468     PME# signalling is currently disabled
469     3.3v AUX Current required : 0 mA (Self powered)
470     Current Power State : D0 (Device operational, no power saving)
471
472 Bus 1 (PCI), Device Number 1, Device Function 1
473 Vendor 1033h NEC Corporation
474 Device 0035h USB
475 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
476 Status 0210h (Has Capabilities List, Medium Timing)
477 Revision 43h, Header Type 00h, Bus Latency Timer 40h
478 Minimum Bus Grant F1h, Maximum Bus Latency 2Ah
479 Self test 00h (Self test not supported)
480 Cache line size 16 Bytes (4 DWords)
481 PCI Class Serial, type USB (OHCI)
482 Subsystem ID 00351186h Unknown
483 Subsystem Vendor 1186h D-Link System Inc
484 Address 0 is a Memory Address (0-4GiB) : BBEFE000h..BBEFEFFFh
485 System IRQ 22, INT# B
486 New Capabilities List Present:
487   Power Management Capability, Version 1.1
488     Supports low power State D1
489     Supports low power State D2
490     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
491     PME# signalling is currently disabled
492     3.3v AUX Current required : 0 mA (Self powered)
493     Current Power State : D0 (Device operational, no power saving)
494
495 Bus 1 (PCI), Device Number 1, Device Function 2
496 Vendor 1033h NEC Corporation
497 Device 00E0h USB 2.0
498 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
499 Status 0210h (Has Capabilities List, Medium Timing)
500 Revision 04h, Header Type 00h, Bus Latency Timer 40h
501 Minimum Bus Grant 10h, Maximum Bus Latency 22h
502 Self test 00h (Self test not supported)
503 Cache line size 16 Bytes (4 DWords)
504 PCI Class Serial, type USB 2.0 (EHCI)
505 Subsystem ID F1011186h Unknown
506 Subsystem Vendor 1186h D-Link System Inc
507 Address 0 is a Memory Address (0-4GiB) : BBEFFC00h..BBEFFC93h
508 System IRQ 23, INT# C
509 New Capabilities List Present:
510   Power Management Capability, Version 1.1
511     Supports low power State D1
512     Supports low power State D2
513     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
514     PME# signalling is currently disabled
515     3.3v AUX Current required : 0 mA (Self powered)
516     Current Power State : D0 (Device operational, no power saving)
517
518 Bus 2 (PCI Express), Device Number 0, Device Function 0
519 Vendor 1969h Atheros Communications
520 Device 2048h L2 Fast Ethernet
521 Command 0006h (Memory Access, BusMaster)
522 Status 0010h (Has Capabilities List, Fast Timing)
523 Revision A0h, Header Type 00h, Bus Latency Timer 00h
524 Self test 00h (Self test not supported)
525 Cache line size 16 Bytes (4 DWords)
526 PCI Class Network, type Ethernet
527 Subsystem ID 82331043h Unknown
528 Subsystem Vendor 1043h ASUSTeK Computer Inc.
529 Address 0 is a Memory Address (64-bit) : BBFC0000h
530 System IRQ 17, INT# A
531 Expansion ROM of 128 KiB decoded by this card, currently disabled
532 New Capabilities List Present:
533   Power Management Capability, Version 1.1
534     Does not support low power State D1 or D2
535     Supports PME# signalling from mode(s) D3hot, D3cold
536     PME# signalling is currently disabled
537     3.3v AUX Current required : 0 mA (Self powered)
538     Current Power State : D0 (Device operational, no power saving)
539   Message Signalled Interrupt Capability
540     MSI is disabled
541     MSI function can generate 64-bit addresses
542   PCI Express Capability, Version 1
543     Device/Port Type :
544       PCI Express Endpoint Device
545     Device Capabilities :
546       Attention Button Present on Device
547       Attention Indicator Present on Device
548       Power Indicator Present on Device
549       Unsupported Request Severity is Non-Fatal
550     Device Status :
551       Non-Fatal Error Detected
552       Unsupported Request Detected
553       AUX Power Detected
554     Link Capabilities :
555       Maximum Link speed : 2.5Gb/s
556       Maximum Link Width : x1
557       Link Port Number   : 0
558     Link Control :
559       Common Clock Configuration In Use
560     Link Status :
561       Current Link speed : 2.5Gb/s
562       Current Link Width : x1
563
564 Bus 4 (AGP), Device Number 0, Device Function 0
565 Vendor 10DEh nVidia Corporation
566 Device 0640h G96 [GeForce 9500 GT]
567 Command 0007h (I/O Access, Memory Access, BusMaster)
568 Status 0010h (Has Capabilities List, Fast Timing)
569 Revision A1h, Header Type 00h, Bus Latency Timer 00h
570 Self test 00h (Self test not supported)
571 Cache line size 16 Bytes (4 DWords)
572 PCI Class Display, type VGA
573 Address 0 is a Memory Address (0-4GiB) : BF000000h
574 Address 1 is a Memory Address (64-bit, Prefetchable) : C0000000h
575 Address 3 is a Memory Address (64-bit) : BC000000h
576 Address 5 is an I/O Port : E800h
577 System IRQ 16, INT# A
578 Expansion ROM of 512 KiB decoded by this card, currently disabled
579 New Capabilities List Present:
580   Power Management Capability, Version 1.2
581     Does not support low power State D1 or D2
582     Does not support PME# signalling
583     Current Power State : D0 (Device operational, no power saving)
584   Message Signalled Interrupt Capability
585     MSI is disabled
586     MSI function can generate 64-bit addresses
587   PCI Express Capability, Version 1
588     Device/Port Type :
589       PCI Express Endpoint Device
590     Device Capabilities :
591       Unsupported Request Severity is Fatal
592     Device Status :
593     Link Capabilities :
594       Maximum Link speed : 2.5Gb/s
595       Maximum Link Width : x16
596       Link Port Number   : 0
597     Link Control :
598       Common Clock Configuration In Use
599     Link Status :
600       Current Link speed : 2.5Gb/s
601       Current Link Width : x16
602   Vendor-Dependant Capability
603
604ROM PCI IRQ routing table Tests....
605 ROM IRQ routing table found at F000h:8140h
606 Table Version 1.0 - OK
607 Table size 272 bytes - OK
608 Table Checksum 21h - OK
609 PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Bridge
610 IRQ's dedicated to PCI : None
611 The ROM PCI IRQ routing table appears to be OK.
612
613IRQ Summary: IRQs 10,11,14,15,16,17,18,19,20,21,22,23 are used by PCI devices
614Shared IRQs: IRQ 11 is shared by 2 PCI Devices
615             IRQ 17 is shared by 3 PCI Devices
616             IRQ 19 is shared by 2 PCI Devices
617             IRQ 20 is shared by 2 PCI Devices
618             IRQ 22 is shared by 2 PCI Devices
619             IRQ 23 is shared by 3 PCI Devices
620
621IRQ control is currently managed by the system APIC controller - IRQ info is
622not actual hardware settings...