Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."

PCI BIOS Version 2.10 found!
Number of PCI Busses : 11
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2770h 82945G Memory Controller Hub (MCH)
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 02h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2772h 82945G Integrated Graphics Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Fast Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : D0400000h
 Address 1 is an I/O Port : 30C0h
 Address 2 is a Memory Address (0-4GiB, Prefetchable) : C0000000h
 Address 3 is a Memory Address (0-4GiB) : D0480000h
 System IRQ 5, INT# A
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 2, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2776h 82945G Integrated Graphics Controller
 Command 0000h (Bus Access Disabled!!)
 Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Fast Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type Other
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27D8h 82801G (ICH7 Family) High Definition Audio
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (64-bit) : D04C0000h..D04C3FFFh
 System IRQ 9, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27D0h 82801G (ICH7 Family) PCI Express Root Port
 Command 0000h (Bus Access Disabled!!)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ 10, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   Memory   Range Passed to Secondary Bus : 00000000h..000FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Fatal Error Reporting Enabled
       Unsupported Request Severity is Non-Fatal
     Device Status :
       Correctable Error Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1014h
     SSID  : 02F6h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently enabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 1
 Vendor 8086h Intel Corporation
 Device 27D2h 82801G (ICH7 Family) PCI Express Root Port
 Command 0000h (Bus Access Disabled!!)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ 5, INT# B
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   Memory   Range Passed to Secondary Bus : 00000000h..000FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : 00000000h..000FFFFFh
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Fatal Error Reporting Enabled
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 2
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1014h
     SSID  : 02F6h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently enabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27C8h 82801G (ICH7 Family) USB Universal Host Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3000h..3013h
 System IRQ 11, INT# A

 Bus 0 (PCI Express), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 27C9h 82801G (ICH7 Family) USB Universal Host Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3020h..3033h
 System IRQ 9, INT# B

 Bus 0 (PCI Express), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 27CAh 82801G (ICH7 Family) USB Universal Host Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3040h..3053h
 System IRQ 11, INT# C

 Bus 0 (PCI Express), Device Number 29, Device Function 3
 Vendor 8086h Intel Corporation
 Device 27CBh 82801G (ICH7 Family) USB Universal Host Controller
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3060h..3073h
 System IRQ 5, INT# D

 Bus 0 (PCI Express), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 27CCh 82801G (ICH7 Family) USB 2.0 Enhanced Host Controller
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : D04C4000h..D04C4093h
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability

 Bus 0 (PCI Express), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 244Eh 82801GB Hub Interface to PCI Bridge (ICH7 A1 step)
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision E1h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 10, Subordinate Bus number 10
   Secondary Bus Command 0004h (ISA mapping)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 20h
   I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : D0000000h..D01FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 1014h
     SSID  : 02F6h

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Controller
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 01h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 27C0h 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller
 Command 0005h (I/O Access, BusMaster)
 Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is an I/O Port : 0000h (unconfigured)
 Address 1 is an I/O Port : 0000h (unconfigured)
 Address 2 is an I/O Port : 0000h (unconfigured)
 Address 3 is an I/O Port : 0000h (unconfigured)
 Address 4 is an I/O Port : 30B0h..30B7h
 System IRQ (disabled), INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 27DAh 82801G (ICH7 Family) SMBus Controller
 Command 0101h (I/O Access, System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 02F61014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 3080h
 System IRQ 9, INT# B

 Bus 10 (PCI), Device Number 10, Device Function 0
 Vendor 9004h Adaptec Inc
 Device 6178h AIC-7861 AHA-2940AU PCI SCSI Controller
 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
   System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 20h
 Minimum Bus Grant 04h, Maximum Bus Latency 04h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Storage, type SCSI
 Subsystem ID 78619004h AHA-2940AU Single
 Subsystem Vendor 9004h Adaptec Inc
 Address 0 is an I/O Port : 4000h..400Fh
 Address 1 is a Memory Address (0-4GiB) : D0100000h
 System IRQ 9, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 10 (PCI), Device Number 12, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1229h 82559 Fast Ethernet Multifunction PCI/CardBus Controller (C-step)
 Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
   System Errors)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 08h, Header Type 00h, Bus Latency Timer 42h
 Minimum Bus Grant 08h, Maximum Bus Latency 38h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 105C1014h Netfinity 10/100 Ethernet Adapter
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : D0101000h
 Address 1 is an I/O Port : 4400h
 Address 2 is a Memory Address (0-4GiB) : D0000000h
 System IRQ 3, INT# A
 Expansion ROM of 1 MiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently enabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
       580 mW D0 power consume
       580 mW D0 power dissipate
       400 mW D1 power consume
       400 mW D1 power dissipate
       400 mW D2 power consume
       400 mW D2 power dissipate
       400 mW D3 power consume
       400 mW D3 power dissipate
         0 mW common logic power consume

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:DED0h
 Table Version 1.0 - OK
 Table size 272 bytes - OK
 Table Checksum CDh - OK
 PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Controller
 IRQ's dedicated to PCI : None
  Error: table entries 5 and 7 refer to the same Bus=0/Device=28!
 The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 3,5,9,10,11,14,15 are used by PCI devices
Shared IRQs: IRQ 5 is shared by 3 PCI Devices
             IRQ 9 is shared by 4 PCI Devices
             IRQ 11 is shared by 3 PCI Devices
