| Version 55 (modified by , 14 years ago) ( diff ) |
|---|
Uniaud for OS/2 & eCS
This is the development home for uniaud, the Universal Audio Driver for eCS and OS/2. The Uniaud project consists of 2 separate drivers, Uniaud16.sys and Uniaud32.sys.
Uniaud32
Uniaud32.sys is the actual audio driver that connects to the hardware and makes it work. It consists of a modified ALSA core and some OS/2 specific pieces which make it load and run on an OS/2 system. Different major versions of Uniaud32 are based on different versions of ALSA. For example, Uniaud32 versions 1.9.x are based on ALSA 1.0.21, and Uniaud32 versions 2.1.x are based on ALSA 1.0.23.
Uniaud16
Uniaud16.sys is the interface between MMOS2 and Uniaud32.sys. Uniaud16 does not talk to the audio hardware. It is just an interface translator, buffer manager, and may do some resampling. Uniaud16.sys has its own version number. Do not confuse Uniaud16's version number with Uniaud32's version number.
Downloading Binary Distributions
The "Retail Install Package" is used to install Uniaud on a system that doesn't already have Uniaud installed. The "Retail and Debug Update" package has both the Retail build and the Debug build of drivers in it. If you already have Uniaud installed on your system, you can download either the "Install" or the "Update" zip file and just copy uniaud16.sys and uniaud32.sys over your existing files.
It is not recommended to run the Debug version unless you are testing a specific problem and need to produce a detailed log. Because of the time needed to output the verbose messages in the debug version of the drivers, the debug versions may exhibit some problems that are not present in the retail versions. The debug versions are known to have these problems:
- A "pop" noise at the end of a sound
- pause/resume can hang the audio stream
- skipping forward and/or back in a stream can hang the audio stream
- changing the volume while a stream is playing can hang the audio stream
- Playing short sounds in rapid succession
A hanging audio stream caused by one of these problems can manifest as stopped audio, or as looping audio. If you see any of these problems AND you are using the debug version of the drivers, please understand that the problem could be because you are using the debug version. You should try the retail version of the drivers before reporting any of these problems.
There is currently one version of Uniaud16, and there are two versions of uniaud32. This is because some people have reported problems with the version of Uniaud32 that is based on the latest version of ALSA. So we are making available two packages for download until we can fix the problems in the new ALSA version. Both contain the same Uniaud16, but one has a version of Uniaud32 based on the older ALSA, and one has a version of Uniaud32 based on latest version of ALSA. Both packages have all the latest fixed in Uniaud16, and both packages have all the latest fixes in the OS/2 specific sections of Uniaud32. The only difference is the ALSA version.
Uniaud16 version 1.9.4 and Uniaud32 version 1.9.24 (based on ALSA 1.0.21):
Retail Install Package: Uniaud194-1924.zip
Retail and Debug Update: UniaudDebug194-1924.zip
Uniaud16 version 1.9.4 and Uniaud32 version 2.1.1 (based on ALSA 1.0.23):
Retail Install Package: Uniaud194-211.zip
Retail and Debug Update: UniaudDebug194-211.zip
Getting the sources
In addition to browsing the sources here, you can check out the sources with your favorite subversion client.
Keep in mind that, unlike cvs, tags and branches are ordinary directories in subversion. With the typical subversion repository layout, it is rather easy to checkout more than you probably intend to. To pull just the trunk version, use something like
mkdir uniaud32_workspace cd uniaud32_workspace svn checkout http://svn.netlabs.org/repos/uniaud/GPL/trunk trunk
and
mkdir uniaud16_workspace cd uniaud16_workspace svn checkout http://svn.netlabs.org/repos/uniaud/OCO/trunk trunk
To update your workspace with the current repository content, use
cd uniaud32_workspace\trunk svn update
If you want commit access to the repository, contact Paul.
Building the drivers
Once you have the sources, building the uniaud drivers is relatively straight-forward. You will need the following development tools:
- OpenWatcom 1.7a or later.
- ilink 5.0 from IBM, or, if using wlink, you need lxlite to bring it down to size.
- The DDK.
- For ACPI builds, the ACPI toolkit.
Distributing builds
Public distribution packages always contain both Uniaud16.sys and Uniaud32.sys. See Release Package Procedures for how we go about this.
There is not usually be a reason to publicly release Uniaud16 or Uniaud32 by itself.
When distributing builds of Uniaud16 or Uniaud32 privately to a few people to test, a good practice, to avoid confusion with the public releases, is to change the "fixpak level" to the svn revision number, e.g. "r380". If it does not match any revision number, perhaps because you are testing before committing, you may want to distinguish it with a word like "TESTCASE" or "CUSTOM". None of these labels for private builds should be committed to the svn repo. It is also helpful to set the HOSTNAME environment variable to a unique word that can trace the build back to you if your build system's hostname doesn't already.
Uniaud32 is GPL, so for license compliance any test builds that are distributed privately should not only specify the svn revision number, but also include a patch against that revision if anything differs. This is easily acquired with:
svn diff > my_uni32_from_r380.patch
The experimental branches each follow very different conventions. See the explanation of the Branches and Versioning Info of Uniaud32 for details about working with them.
Debugging and such
Since the drivers are under development, issues are expected. See debugging hints for a guide to techniques and tools that can make solving them easier (we hope).
Alsa Resync
Uniaud derives some of its functionality from the Alsa project. This mean we periodically resync our sources with the latest ALSA sources. This provide both aditional device support as well as defect fixes.
Submitting Tickets
You must be logged into TRAC to create tickets. Please login with your Netlabs login id. If you do not have a login id, you can request one at http://www.netlabs.org/en/site/member/member.xml. If you have troubles acquiring a Netlabs login id send an e-mail to Netlabs Community Mailing List.
When you create a new ticket, please remember to always attach the uniaud log.
You can create the log we need, by downloading this package:
ftp://ftp.netlabs.org/pub/uniaud/UniLog.zip
Please attach the zip file it creates to your ticket.
Information for End Users
More information regarding selection, installation, and basic testing may be found on the End User Info page.
Mailing lists
Access to the mailing lists is available both via e-mail and news.
Credits
- Vlad Stelmahosky
- Pavel Schtemenko
- Paul Smedley
- Rich Jerant
- Steven Levine
- Mike Greene
- Allan Holm
- Andy Willis
- Brendan Oakley
- Roderick Klein
- David Azarewicz
If we forgot anyone, please let us know. It was unintentional.
[]
