id,summary,reporter,owner,description,type,status,priority,milestone,component,version,severity,resolution,keywords,cc 122,UNIAUD32 Problems with ICH7 + ALC662 - 1.1.4RCx and 1.9.x,Steve Wendt,,"After I installed eCS RC4 to this new machine (Core2 Quad on a Gigabyte GA-G31M-S2L motherboard... of course, running on SMP mode) I was surprised by the fact the boot trapped during UNIAUD32 (1.1.4 RC4) loading. Well, I tried 1.1.4RC5 r 1.1.4RC6 and they both trapped in the same way. Then I reverted to 1.1.4RC3 and it trapped the same way. Only with UNIAUD 1.1.4 RC2 I had modest success. The results improved a lot when I used UNIAUD16 from 1.1.4RC6 + UNIAUD32 from 1.1.4RC2. The only complains are about random hangs during boot (sometimes the boot simply stops during UNIAUD drivers load, but this is uncommon), random (rare) hangs on the system. Also, the sound is not continuous. Sometimes it is somewhat interrupted or has its volume(?) changed during the audio play. The worst part is the fact that the driver probably is not correctly cleaning the house (buffers?) because it is *very* common that something keeps some WPS thread ""hanged"", causing problems during shutdown (the xShutdown progress window reports an exception had occurred and keeps waiting forever... I am obligated to kill CAD handler and reset using C-A-D). I had tried Paul's UNIAUD 1.9.2, 1.9.3 and 1.9.4. As far as I remember, 1.9.2 keeps repeating sounds (buffer problem... instead of a ""tadam!"", the result is a ""tadtadtadtadtad...(forever)"". 1.9.3 and 1.9.4 just plays no sound at all. I had disabled UNIAUD so I can work without the related problems, but that also means no sound, of course. :P",defect,closed,normal,HDA,UNIAUD32,1.9.4,major,unknown,1.1.4RC6 and 1.9.4,