Ticket #208: P5PL2.pci

File P5PL2.pci, 23.5 KB (added by robh, 13 years ago)
Line 
1Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
2Loaded Vendor Data : "This is version ha_merged, 11 Oct 2010 08:16:43"
3
4PCI BIOS Version 2.10 found!
5Number of PCI Busses : 5
6PCI Characteristics  : Config Mechanism 1
7
8Searching for PCI Devices using the OEMHLP$ driver
9
10 Bus 0 (PCI Express), Device Number 0, Device Function 0
11 Vendor 8086h Intel Corporation
12 Device 2770h 82945G/GZ/P/PL Memory Controller Hub
13 Command 0006h (Memory Access, BusMaster)
14 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
15   Received Master Abort, Fast Timing)
16 Revision 02h, Header Type 00h, Bus Latency Timer 00h
17 Self test 00h (Self test not supported)
18 PCI Class Bridge, type PCI to HOST
19 Subsystem ID 81781043h P5LD2-VM Mainboard (Guess Only!)
20 Subsystem Vendor 1043h ASUSTeK Computer Inc.
21 New Capabilities List Present:
22   Vendor-Dependant Capability
23
24 Bus 0 (PCI Express), Device Number 1, Device Function 0
25 Vendor 8086h Intel Corporation
26 Device 2771h 82945G/GZ/P/PL PCI Express Root Port
27 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
28 Status 0010h (Has Capabilities List, Fast Timing)
29 Revision 02h, Header Type 01h, Bus Latency Timer 00h
30 Self test 00h (Self test not supported)
31 Cache line size 16 Bytes (4 DWords)
32 PCI Class Bridge, type PCI to PCI
33 Subsystem ID 00008086h Unknown
34 Subsystem Vendor 8086h Intel Corporation
35 System IRQ 11, INT# A
36 PCI Bridge Information:
37   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
38   Secondary Bus Command 000Ah (CSERR forwarded, VGA mapping)
39   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
40   Secondary Bus Latency 00h
41   I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit)
42   Memory   Range Passed to Secondary Bus : E7F00000h..E7FFFFFFh
43   Prefetchable Memory Range Passed to Secondary Bus : E8000000h..EFFFFFFFh
44 New Capabilities List Present:
45   Subsystem ID & Subsystem Vendor ID Capability
46     SSVID : 8086h
47     SSID  : 0000h
48   Power Management Capability, Version 1.1
49     Does not support low power State D1 or D2
50     Supports PME# signalling from mode(s) D0, D3hot, D3cold
51     PME# signalling is currently disabled
52     3.3v AUX Current required : 0 mA (Self powered)
53     Current Power State : D0 (Device operational, no power saving)
54   Message Signalled Interrupt Capability
55     MSI is disabled
56     MSI function can generate 32-bit addresses
57   PCI Express Capability, Version 1
58     Device/Port Type :
59       Root port of PCI Express Root Complex
60     Port Type :
61       Port is an Expansion Slot
62       Unsupported Request Severity is Non-Fatal
63     Device Status :
64     Link Capabilities :
65       Maximum Link speed : 2.5Gb/s
66       Maximum Link Width : x16
67       Link Port Number   : 2
68     Link Control :
69       Common Clock Configuration In Use
70     Link Status :
71       Current Link speed : 2.5Gb/s
72       Current Link Width : x16
73     Slot Capabilities :
74       Slot Power Limit Value :   4.000 Watts
75       Physical slot Number 0
76
77 Bus 0 (PCI Express), Device Number 27, Device Function 0
78 Vendor 8086h Intel Corporation
79 Device 27D8h N10/ICH 7 Family High Definition Audio Controller
80 Command 0006h (Memory Access, BusMaster)
81 Status 0010h (Has Capabilities List, Fast Timing)
82 Revision 01h, Header Type 00h, Bus Latency Timer 00h
83 Self test 00h (Self test not supported)
84 Cache line size 16 Bytes (4 DWords)
85 PCI Class Multimedia, type Unknown!
86 Subsystem ID 817F1043h P5LD2-VM Mainboard (Realtek ALC 882 codec)
87 Subsystem Vendor 1043h ASUSTeK Computer Inc.
88 Address 0 is a Memory Address (64-bit) : E7DF8000h..E7DFBFFFh
89 System IRQ 19, INT# A
90 New Capabilities List Present:
91   Power Management Capability, Version 1.1
92     Does not support low power State D1 or D2
93     Supports PME# signalling from mode(s) D0, D3hot, D3cold
94     PME# signalling is currently disabled
95     3.3v AUX Current required : 55 mA
96     Current Power State : D0 (Device operational, no power saving)
97   Message Signalled Interrupt Capability
98     MSI is disabled
99     MSI function can generate 64-bit addresses
100   PCI Express Capability, Version 1
101     Device/Port Type :
102       Root Complex Integrated Endpoint Device
103       Unsupported Request Severity is Non-Fatal
104     Device Status :
105       AUX Power Detected
106     Link Capabilities :
107       Maximum Link speed : Unknown (00h)!!
108       Maximum Link Width : xReserved
109       Link Port Number   : 0
110     Link Control :
111       Asynchronous Clocking in Use
112     Link Status :
113       Current Link speed : Unknown (00)!!
114       Current Link Width : x0
115
116 Bus 0 (PCI Express), Device Number 28, Device Function 0
117 Vendor 8086h Intel Corporation
118 Device 27D0h N10/ICH 7 Family PCI Express Port 1
119 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
120 Status 0010h (Has Capabilities List, Fast Timing)
121 Revision 01h, Header Type 81h, Bus Latency Timer 00h
122 Self test 00h (Self test not supported)
123 Cache line size 16 Bytes (4 DWords)
124 PCI Class Bridge, type PCI to PCI
125 Subsystem ID 81791043h Unknown
126 Subsystem Vendor 1043h ASUSTeK Computer Inc.
127 System IRQ 11, INT# A
128 PCI Bridge Information:
129   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
130   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
131   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
132   Secondary Bus Latency 00h
133   I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit)
134   Memory   Range Passed to Secondary Bus : None
135   Prefetchable Memory Range Passed to Secondary Bus : None
136 New Capabilities List Present:
137   PCI Express Capability, Version 1
138     Device/Port Type :
139       Root port of PCI Express Root Complex
140     Port Type :
141       Port is an Expansion Slot
142       Unsupported Request Severity is Non-Fatal
143     Device Status :
144       AUX Power Detected
145     Link Capabilities :
146       Maximum Link speed : 2.5Gb/s
147       Maximum Link Width : x1
148       Link Port Number   : 1
149     Link Control :
150       Common Clock Configuration In Use
151     Link Status :
152       Current Link speed : 2.5Gb/s
153       Current Link Width : x0
154     Slot Capabilities :
155       Hot Plug Surprise is Possible
156       Hot Plug Capable
157       Slot Power Limit Value :   2.000 Watts
158       Physical slot Number 0
159   Message Signalled Interrupt Capability
160     MSI is disabled
161     MSI function can generate 32-bit addresses
162   Subsystem ID & Subsystem Vendor ID Capability
163     SSVID : 1043h
164     SSID  : 8179h
165   Power Management Capability, Version 1.1
166     Does not support low power State D1 or D2
167     Supports PME# signalling from mode(s) D0, D3hot, D3cold
168     PME# signalling is currently disabled
169     3.3v AUX Current required : 0 mA (Self powered)
170     Current Power State : D0 (Device operational, no power saving)
171
172 Bus 0 (PCI Express), Device Number 28, Device Function 1
173 Vendor 8086h Intel Corporation
174 Device 27D2h N10/ICH 7 Family PCI Express Port 2
175 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
176 Status 0010h (Has Capabilities List, Fast Timing)
177 Revision 01h, Header Type 81h, Bus Latency Timer 00h
178 Self test 00h (Self test not supported)
179 Cache line size 16 Bytes (4 DWords)
180 PCI Class Bridge, type PCI to PCI
181 Subsystem ID 81791043h Unknown
182 Subsystem Vendor 1043h ASUSTeK Computer Inc.
183 System IRQ 10, INT# B
184 PCI Bridge Information:
185   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
186   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
187   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
188   Secondary Bus Latency 00h
189   I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
190   Memory   Range Passed to Secondary Bus : E7E00000h..E7EFFFFFh
191   Prefetchable Memory Range Passed to Secondary Bus : None
192 New Capabilities List Present:
193   PCI Express Capability, Version 1
194     Device/Port Type :
195       Root port of PCI Express Root Complex
196     Port Type :
197       Port is an Expansion Slot
198       Unsupported Request Severity is Non-Fatal
199     Device Status :
200       AUX Power Detected
201     Link Capabilities :
202       Maximum Link speed : 2.5Gb/s
203       Maximum Link Width : x1
204       Link Port Number   : 2
205     Link Control :
206       Common Clock Configuration In Use
207     Link Status :
208       Current Link speed : 2.5Gb/s
209       Current Link Width : x1
210     Slot Capabilities :
211       Hot Plug Surprise is Possible
212       Hot Plug Capable
213       Slot Power Limit Value :   4.000 Watts
214       Physical slot Number 0
215   Message Signalled Interrupt Capability
216     MSI is disabled
217     MSI function can generate 32-bit addresses
218   Subsystem ID & Subsystem Vendor ID Capability
219     SSVID : 1043h
220     SSID  : 8179h
221   Power Management Capability, Version 1.1
222     Does not support low power State D1 or D2
223     Supports PME# signalling from mode(s) D0, D3hot, D3cold
224     PME# signalling is currently disabled
225     3.3v AUX Current required : 0 mA (Self powered)
226     Current Power State : D0 (Device operational, no power saving)
227
228 Bus 0 (PCI Express), Device Number 29, Device Function 0
229 Vendor 8086h Intel Corporation
230 Device 27C8h N10/ICH 7 Family USB UHCI Controller #1
231 Command 0005h (I/O Access, BusMaster)
232 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
233 Revision 01h, Header Type 80h, Bus Latency Timer 00h
234 Self test 00h (Self test not supported)
235 PCI Class Serial, type USB (UHCI)
236 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
237 Subsystem Vendor 1043h ASUSTeK Computer Inc.
238 Address 0 is not present or not configured!
239 Address 1 is not present or not configured!
240 Address 2 is not present or not configured!
241 Address 3 is not present or not configured!
242 Address 4 is an I/O Port : 5400h..5413h
243 System IRQ 20, INT# A
244
245 Bus 0 (PCI Express), Device Number 29, Device Function 1
246 Vendor 8086h Intel Corporation
247 Device 27C9h N10/ICH 7 Family USB UHCI Controller #2
248 Command 0005h (I/O Access, BusMaster)
249 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
250 Revision 01h, Header Type 00h, Bus Latency Timer 00h
251 Self test 00h (Self test not supported)
252 PCI Class Serial, type USB (UHCI)
253 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
254 Subsystem Vendor 1043h ASUSTeK Computer Inc.
255 Address 0 is not present or not configured!
256 Address 1 is not present or not configured!
257 Address 2 is not present or not configured!
258 Address 3 is not present or not configured!
259 Address 4 is an I/O Port : 5800h..5813h
260 System IRQ 17, INT# B
261
262 Bus 0 (PCI Express), Device Number 29, Device Function 2
263 Vendor 8086h Intel Corporation
264 Device 27CAh N10/ICH 7 Family USB UHCI Controller #3
265 Command 0005h (I/O Access, BusMaster)
266 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
267 Revision 01h, Header Type 00h, Bus Latency Timer 00h
268 Self test 00h (Self test not supported)
269 PCI Class Serial, type USB (UHCI)
270 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
271 Subsystem Vendor 1043h ASUSTeK Computer Inc.
272 Address 0 is not present or not configured!
273 Address 1 is not present or not configured!
274 Address 2 is not present or not configured!
275 Address 3 is not present or not configured!
276 Address 4 is an I/O Port : 6000h..6013h
277 System IRQ 18, INT# C
278
279 Bus 0 (PCI Express), Device Number 29, Device Function 3
280 Vendor 8086h Intel Corporation
281 Device 27CBh N10/ICH 7 Family USB UHCI Controller #4
282 Command 0005h (I/O Access, BusMaster)
283 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
284 Revision 01h, Header Type 00h, Bus Latency Timer 00h
285 Self test 00h (Self test not supported)
286 PCI Class Serial, type USB (UHCI)
287 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
288 Subsystem Vendor 1043h ASUSTeK Computer Inc.
289 Address 0 is not present or not configured!
290 Address 1 is not present or not configured!
291 Address 2 is not present or not configured!
292 Address 3 is not present or not configured!
293 Address 4 is an I/O Port : 6400h..6413h
294 System IRQ 19, INT# D
295
296 Bus 0 (PCI Express), Device Number 29, Device Function 7
297 Vendor 8086h Intel Corporation
298 Device 27CCh N10/ICH 7 Family USB2 EHCI Controller
299 Command 0006h (Memory Access, BusMaster)
300 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
301   Medium Timing)
302 Revision 01h, Header Type 00h, Bus Latency Timer 00h
303 Self test 00h (Self test not supported)
304 PCI Class Serial, type USB 2.0 (EHCI)
305 Subsystem ID 81791043h P5KPL-VM,P5LD2-VM Mainboard
306 Subsystem Vendor 1043h ASUSTeK Computer Inc.
307 Address 0 is a Memory Address (0-4GiB) : E7DFFC00h..E7DFFC93h
308 System IRQ 20, INT# A
309 New Capabilities List Present:
310   Power Management Capability, Version 1.1
311     Does not support low power State D1 or D2
312     Supports PME# signalling from mode(s) D0, D3hot, D3cold
313     PME# signalling is currently disabled
314     3.3v AUX Current required : 375 mA
315     Current Power State : D0 (Device operational, no power saving)
316   USB 2.0 EHCI Debug Port Capability
317
318 Bus 0 (PCI Express), Device Number 30, Device Function 0
319 Vendor 8086h Intel Corporation
320 Device 244Eh 82801 PCI Bridge
321 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
322 Status 0010h (Has Capabilities List, Fast Timing)
323 Revision E1h, Header Type 01h, Bus Latency Timer 00h
324 Self test 00h (Self test not supported)
325 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
326 Subsystem ID 81791043h Unknown
327 Subsystem Vendor 1043h ASUSTeK Computer Inc.
328 PCI Bridge Information:
329   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
330   Secondary Bus Command 0006h (CSERR forwarded, ISA mapping)
331   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
332     Received Master Abort, Medium Timing)
333   Secondary Bus Latency 20h
334   I/O Port Range Passed to Secondary Bus : A000h..BFFFh (16-bit)
335   Memory   Range Passed to Secondary Bus : None
336   Prefetchable Memory Range Passed to Secondary Bus : None
337 New Capabilities List Present:
338   Subsystem ID & Subsystem Vendor ID Capability
339     SSVID : 1043h
340     SSID  : 8179h
341
342 Bus 0 (PCI Express), Device Number 31, Device Function 0
343 Vendor 8086h Intel Corporation
344 Device 27B8h 82801GB/GR (ICH7 Family) LPC Interface Bridge
345 Command 0007h (I/O Access, Memory Access, BusMaster)
346 Status 0210h (Has Capabilities List, Medium Timing)
347 Revision 01h, Header Type 80h, Bus Latency Timer 00h
348 Self test 00h (Self test not supported)
349 PCI Class Bridge, type PCI to ISA
350 Subsystem ID 81791043h P5KPL-VM Motherboard
351 Subsystem Vendor 1043h ASUSTeK Computer Inc.
352 New Capabilities List Present:
353   Vendor-Dependant Capability
354
355 Bus 0 (PCI Express), Device Number 31, Device Function 1
356 Vendor 8086h Intel Corporation
357 Device 27DFh 82801G (ICH7 Family) IDE Controller
358 Command 0005h (I/O Access, BusMaster)
359 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
360 Revision 01h, Header Type 00h, Bus Latency Timer 00h
361 Self test 00h (Self test not supported)
362 PCI Class Storage, type IDE (ATA)
363 PCI EIDE Controller Features :
364   BusMaster EIDE is supported
365   Primary   Channel is in native mode at Addresses 0 & 1
366   Secondary Channel is in native mode at Addresses 2 & 3
367 Subsystem ID 81791043h P5KPL-VM Motherboard
368 Subsystem Vendor 1043h ASUSTeK Computer Inc.
369 Address 0 is an I/O Port : 8000h..8007h
370 Address 1 is an I/O Port : 7800h
371 Address 2 is an I/O Port : 7400h
372 Address 3 is an I/O Port : 7000h
373 Address 4 is an I/O Port : 6800h..6807h
374 System IRQ 22, INT# A
375
376 Bus 0 (PCI Express), Device Number 31, Device Function 2
377 Vendor 8086h Intel Corporation
378 Device 27C0h N10/ICH7 Family SATA IDE Controller
379 Command 0005h (I/O Access, BusMaster)
380 Status 02B0h (Has Capabilities List, Supports 66MHz,
381   Supports Back-To-Back Trans., Medium Timing)
382 Revision 01h, Header Type 00h, Bus Latency Timer 00h
383 Self test 00h (Self test not supported)
384 PCI Class Storage, type IDE (ATA)
385 PCI EIDE Controller Features :
386   BusMaster EIDE is supported
387   Primary   Channel is in native mode at Addresses 0 & 1
388   Secondary Channel is in native mode at Addresses 2 & 3
389 Subsystem ID 26011043h P5KPL-VM Motherboard (Guess Only!)
390 Subsystem Vendor 1043h ASUSTeK Computer Inc.
391 Address 0 is an I/O Port : 9800h..9807h
392 Address 1 is an I/O Port : 9400h
393 Address 2 is an I/O Port : 9000h..9007h
394 Address 3 is an I/O Port : 8800h
395 Address 4 is an I/O Port : 8400h..8407h
396 System IRQ 23, INT# B
397 New Capabilities List Present:
398   Power Management Capability, Version 1.1
399     Does not support low power State D1 or D2
400     Supports PME# signalling from mode(s) D3hot
401     PME# signalling is currently disabled
402     3.3v AUX Current required : 0 mA (Self powered)
403     Current Power State : D0 (Device operational, no power saving)
404
405 Bus 0 (PCI Express), Device Number 31, Device Function 3
406 Vendor 8086h Intel Corporation
407 Device 27DAh N10/ICH 7 Family SMBus Controller
408 Command 0001h (I/O Access)
409 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
410 Revision 01h, Header Type 00h, Bus Latency Timer 00h
411 Self test 00h (Self test not supported)
412 PCI Class Serial, type SMBus Controller
413 Subsystem ID 81791043h P5KPL-VM Motherboard
414 Subsystem Vendor 1043h ASUSTeK Computer Inc.
415 Address 0 is not present or not configured!
416 Address 1 is not present or not configured!
417 Address 2 is not present or not configured!
418 Address 3 is not present or not configured!
419 Address 4 is an I/O Port : 0400h
420 System IRQ 23, INT# B
421
422 Bus 1 (PCI), Device Number 1, Device Function 0
423 Vendor 9710h NetMos Technology
424 Device 9835h PCI 9835 Multi-I/O Controller
425 Command 0003h (I/O Access, Memory Access)
426 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
427 Revision 01h, Header Type 00h, Bus Latency Timer 40h
428 Self test 00h (Self test not supported)
429 Cache line size 16 Bytes (4 DWords)
430 PCI Class Simple Communication, type Serial - 16550
431 Subsystem ID 00021000h 2S (16C550 UART)
432 Subsystem Vendor 1000h LSI Logic / Symbios Logic
433 Address 0 is an I/O Port : B800h..B807h
434 Address 1 is an I/O Port : B400h..B407h
435 Address 2 is an I/O Port : B000h
436 Address 3 is an I/O Port : A800h
437 Address 4 is an I/O Port : A400h
438 Address 5 is an I/O Port : A000h
439 System IRQ 21, INT# A
440
441 Bus 2 (PCI Express), Device Number 0, Device Function 0
442 Vendor 8086h Intel Corporation
443 Device 10D3h 82574L Gigabit Network Connection
444 Command 0007h (I/O Access, Memory Access, BusMaster)
445 Status 0010h (Has Capabilities List, Fast Timing)
446 Revision 00h, Header Type 00h, Bus Latency Timer 00h
447 Self test 00h (Self test not supported)
448 Cache line size 64 Bytes (16 DWords)
449 PCI Class Network, type Ethernet
450 Subsystem ID A01F8086h Gigabit CT Desktop Adapter
451 Subsystem Vendor 8086h Intel Corporation
452 Address 0 is a Memory Address (0-4GiB) : E7EE0000h..E7EFFFFFh
453 Address 1 is a Memory Address (0-4GiB) : E7E00000h..E7E7FFFFh
454 Address 2 is an I/O Port : C800h..C81Fh
455 Address 3 is a Memory Address (0-4GiB) : E7EDC000h..E7EDFFFFh
456 System IRQ 17, INT# A
457 Expansion ROM of 256 KiB decoded by this card, currently disabled
458 New Capabilities List Present:
459   Power Management Capability, Version 1.1
460     Does not support low power State D1 or D2
461     Supports PME# signalling from mode(s) D0, D3hot, D3cold
462     PME# signalling is currently disabled
463     3.3v AUX Current required : 0 mA (Self powered)
464     Current Power State : D0 (Device operational, no power saving)
465      2000 mW D0 power consume
466      2000 mW D0 power dissipate
467       800 mW D3 power consume
468       800 mW D3 power dissipate
469         0 mW common logic power consume
470   Message Signalled Interrupt Capability
471     MSI is disabled
472     MSI function can generate 64-bit addresses
473   PCI Express Capability, Version 1
474     Device/Port Type :
475       PCI Express Endpoint Device
476     Device Capabilities :
477       Unsupported Request Severity is Fatal
478     Device Status :
479       Correctable Error Detected
480       Unsupported Request Detected
481       AUX Power Detected
482     Link Capabilities :
483       Maximum Link speed : 2.5Gb/s
484       Maximum Link Width : x1
485       Link Port Number   : 0
486     Link Control :
487       Common Clock Configuration In Use
488     Link Status :
489       Current Link speed : 2.5Gb/s
490       Current Link Width : x1
491   MSI-X Capability
492
493 Bus 4 (AGP), Device Number 0, Device Function 0
494 Vendor 1002h ATI Technologies Inc
495 Device 5B60h RV370 5B60 [Radeon X300 (PCIE)]
496 Command 0007h (I/O Access, Memory Access, BusMaster)
497 Status 0010h (Has Capabilities List, Fast Timing)
498 Revision 00h, Header Type 80h, Bus Latency Timer 00h
499 Self test 00h (Self test not supported)
500 Cache line size 16 Bytes (4 DWords)
501 PCI Class Display, type VGA
502 Subsystem ID 00831043h Extreme AX300SE-X (Guess Only!)
503 Subsystem Vendor 1043h ASUSTeK Computer Inc.
504 Address 0 is a Memory Address (0-4GiB, Prefetchable) : E8000000h
505 Address 1 is an I/O Port : E000h
506 Address 2 is a Memory Address (0-4GiB) : E7FE0000h
507 System IRQ 16, INT# A
508 Expansion ROM of 128 KiB decoded by this card, currently disabled
509 New Capabilities List Present:
510   Power Management Capability, Version 1.1
511     Supports low power State D1
512     Supports low power State D2
513     Does not support PME# signalling
514     Current Power State : D0 (Device operational, no power saving)
515   PCI Express Capability, Version 1
516     Device/Port Type :
517       PCI Express Endpoint Device
518     Device Capabilities :
519       Unsupported Request Severity is Fatal
520     Device Status :
521     Link Capabilities :
522       Maximum Link speed : 2.5Gb/s
523       Maximum Link Width : x16
524       Link Port Number   : 0
525     Link Control :
526       Common Clock Configuration In Use
527     Link Status :
528       Current Link speed : 2.5Gb/s
529       Current Link Width : x16
530   Message Signalled Interrupt Capability
531     MSI is disabled
532     MSI function can generate 64-bit addresses
533
534 Bus 4 (AGP), Device Number 0, Device Function 1
535 Vendor 1002h ATI Technologies Inc
536 Device 5B70h RV370 [Radeon X300SE]
537 Command 0007h (I/O Access, Memory Access, BusMaster)
538 Status 0010h (Has Capabilities List, Fast Timing)
539 Revision 00h, Header Type 00h, Bus Latency Timer 00h
540 Self test 00h (Self test not supported)
541 Cache line size 16 Bytes (4 DWords)
542 PCI Class Display, type Other
543 Subsystem ID 00821043h Unknown
544 Subsystem Vendor 1043h ASUSTeK Computer Inc.
545 Address 0 is a Memory Address (0-4GiB) : E7FF0000h
546 New Capabilities List Present:
547   Power Management Capability, Version 1.1
548     Supports low power State D1
549     Supports low power State D2
550     Does not support PME# signalling
551     Current Power State : D0 (Device operational, no power saving)
552   PCI Express Capability, Version 1
553     Device/Port Type :
554       PCI Express Endpoint Device
555     Device Capabilities :
556       Unsupported Request Severity is Non-Fatal
557     Device Status :
558     Link Capabilities :
559       Maximum Link speed : 2.5Gb/s
560       Maximum Link Width : x16
561       Link Port Number   : 0
562     Link Control :
563       Common Clock Configuration In Use
564     Link Status :
565       Current Link speed : 2.5Gb/s
566       Current Link Width : x16
567
568ROM PCI IRQ routing table Tests....
569 ROM IRQ routing table found at F000h:7C70h
570 Table Version 1.0 - OK
571 Table size 272 bytes - OK
572 Table Checksum BBh - OK
573 PCI Interrupt Router: 82801GB/GR (ICH7 Family) LPC Interface Bridge
574 IRQ's dedicated to PCI : None
575 The ROM PCI IRQ routing table appears to be OK.
576
577IRQ Summary: IRQs 10,11,16,17,18,19,20,21,22,23 are used by PCI devices
578Shared IRQs: IRQ 11 is shared by 2 PCI Devices
579             IRQ 17 is shared by 2 PCI Devices
580             IRQ 19 is shared by 2 PCI Devices
581             IRQ 20 is shared by 2 PCI Devices
582             IRQ 23 is shared by 2 PCI Devices
583
584IRQ control is currently managed by the system APIC controller - IRQ info is
585not actual hardware settings...