1 | Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. |
---|
2 | Loaded Vendor Data : "This is version 640 of this file; 16-05-2007 (D-M-Y)." |
---|
3 | |
---|
4 | PCI BIOS Version 2.10 found! |
---|
5 | Number of PCI Busses : 2 |
---|
6 | PCI Characteristics : Config Mechanism 1 |
---|
7 | |
---|
8 | Searching for PCI Devices using the OEMHLP$ driver |
---|
9 | |
---|
10 | Bus 0 (PCI), Device Number 0, Device Function 0 |
---|
11 | Vendor 1106h VIA Technologies Inc |
---|
12 | Device 3189h VT8377 Apollo KT400/A/600 CPU to PCI Bridge |
---|
13 | Command 0006h (Memory Access, BusMaster) |
---|
14 | Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort, |
---|
15 | Medium Timing) |
---|
16 | Revision 00h, Header Type 00h, Bus Latency Timer 00h |
---|
17 | Self test 00h (Self test not supported) |
---|
18 | PCI Class Bridge, type PCI to HOST |
---|
19 | Subsystem ID 807F1043h Unknown |
---|
20 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
21 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : FC000000h |
---|
22 | New Capabilities List Present: |
---|
23 | AGP Capability, Version 2.0 (AGP 4x and below support) |
---|
24 | AGP Speed(s) Supported : 1x 2x 4x |
---|
25 | FW Transfers Supported : No |
---|
26 | >4GiB Address Space Supported : No |
---|
27 | Sideband Addressing Supported : Yes |
---|
28 | Maximum Command Queue Length : 32 bytes |
---|
29 | AGP Speed Selected : 4x |
---|
30 | FW Transfers Enabled : No |
---|
31 | >4GiB Address Space Enabled : No |
---|
32 | AGP Enabled : Yes |
---|
33 | Sideband Addressing Enabled : Yes |
---|
34 | Current Command Queue Length : 32 bytes |
---|
35 | Power Management Capability, Version 1.1 |
---|
36 | Does not support low power State D1 or D2 |
---|
37 | Does not support PME# signalling |
---|
38 | Current Power State : D0 (Device operational, no power saving) |
---|
39 | |
---|
40 | Bus 0 (PCI), Device Number 1, Device Function 0 |
---|
41 | Vendor 1106h VIA Technologies Inc |
---|
42 | Device B168h ProSavageDDR P4X333 CPU to AGP 2.0/3.0 Bridge |
---|
43 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
44 | Status 2230h (Has Capabilities List, Supports 66MHz, Received Master Abort, |
---|
45 | Medium Timing) |
---|
46 | Revision 00h, Header Type 01h, Bus Latency Timer 00h |
---|
47 | Self test 00h (Self test not supported) |
---|
48 | PCI Class Bridge, type PCI to PCI |
---|
49 | PCI Bridge Information: |
---|
50 | Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1 |
---|
51 | Secondary Bus Command 0008h (VGA mapping) |
---|
52 | Secondary Bus Status 0000h |
---|
53 | Secondary Bus Latency 00h |
---|
54 | I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit) |
---|
55 | Memory Range Passed to Secondary Bus : EF000000h..EFDFFFFFh |
---|
56 | Prefetchable Memory Range Passed to Secondary Bus : EFF00000h..FBFFFFFFh |
---|
57 | New Capabilities List Present: |
---|
58 | Power Management Capability, Version 1.1 |
---|
59 | Supports low power State D1 |
---|
60 | Does not support PME# signalling |
---|
61 | Current Power State : D0 (Device operational, no power saving) |
---|
62 | |
---|
63 | Bus 0 (PCI), Device Number 13, Device Function 0 |
---|
64 | Vendor 8086h Intel Corporation |
---|
65 | Device 1229h 82559 Fast Ethernet Multifunction PCI/CardBus Controller (C-step) |
---|
66 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
67 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
68 | Medium Timing) |
---|
69 | Revision 08h, Header Type 00h, Bus Latency Timer 20h |
---|
70 | Minimum Bus Grant 08h, Maximum Bus Latency 38h |
---|
71 | Self test 00h (Self test not supported) |
---|
72 | Cache line size 32 Bytes (8 DWords) |
---|
73 | PCI Class Network, type Ethernet |
---|
74 | Subsystem ID 000B8086h PRO/100+ Ethernet Adapter |
---|
75 | Subsystem Vendor 8086h Intel Corporation |
---|
76 | Address 0 is a Memory Address (0-4GiB) : EE800000h..EE800FFFh |
---|
77 | Address 1 is an I/O Port : B800h..B83Fh |
---|
78 | Address 2 is a Memory Address (0-4GiB) : EE000000h..EE0FFFFFh |
---|
79 | System IRQ 11, INT# A |
---|
80 | Expansion ROM of 1 MiB decoded by this card, currently disabled |
---|
81 | New Capabilities List Present: |
---|
82 | Power Management Capability, Version 1.1 |
---|
83 | Supports low power State D1 |
---|
84 | Supports low power State D2 |
---|
85 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
86 | PME# signalling is currently disabled |
---|
87 | 3.3v AUX Current required : 0 mA (Self powered) |
---|
88 | Current Power State : D0 (Device operational, no power saving) |
---|
89 | 580 mW D0 power consume |
---|
90 | 580 mW D0 power dissipate |
---|
91 | 400 mW D1 power consume |
---|
92 | 400 mW D1 power dissipate |
---|
93 | 400 mW D2 power consume |
---|
94 | 400 mW D2 power dissipate |
---|
95 | 400 mW D3 power consume |
---|
96 | 400 mW D3 power dissipate |
---|
97 | 0 mW common logic power consume |
---|
98 | |
---|
99 | Bus 0 (PCI), Device Number 15, Device Function 0 |
---|
100 | Vendor 1102h Creative Labs |
---|
101 | Device 0002h EMU10K1 Audio Chipset (SB Live!) |
---|
102 | Command 0005h (I/O Access, BusMaster) |
---|
103 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
104 | Medium Timing) |
---|
105 | Revision 0Ah, Header Type 80h, Bus Latency Timer 20h |
---|
106 | Minimum Bus Grant 02h, Maximum Bus Latency 14h |
---|
107 | Self test 00h (Self test not supported) |
---|
108 | PCI Class Multimedia, type Audio |
---|
109 | Subsystem ID 80221102h CT4780 SBLive! Value |
---|
110 | Subsystem Vendor 1102h Creative Labs |
---|
111 | Address 0 is an I/O Port : B400h..B41Fh |
---|
112 | System IRQ 10, INT# A |
---|
113 | New Capabilities List Present: |
---|
114 | Power Management Capability, Version 1.0 |
---|
115 | Supports low power State D1 |
---|
116 | Supports low power State D2 |
---|
117 | Does not support PME# signalling |
---|
118 | Current Power State : D0 (Device operational, no power saving) |
---|
119 | |
---|
120 | Bus 0 (PCI), Device Number 15, Device Function 1 |
---|
121 | Vendor 1102h Creative Labs |
---|
122 | Device 7002h PCI Gameport |
---|
123 | Command 0005h (I/O Access, BusMaster) |
---|
124 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
125 | Medium Timing) |
---|
126 | Revision 0Ah, Header Type 80h, Bus Latency Timer 20h |
---|
127 | Self test 00h (Self test not supported) |
---|
128 | PCI Class Input, type Other |
---|
129 | Subsystem ID 00201102h PCI Gameport |
---|
130 | Subsystem Vendor 1102h Creative Labs |
---|
131 | Address 0 is an I/O Port : B000h |
---|
132 | New Capabilities List Present: |
---|
133 | Power Management Capability, Version 1.0 |
---|
134 | Supports low power State D1 |
---|
135 | Supports low power State D2 |
---|
136 | Does not support PME# signalling |
---|
137 | Current Power State : D0 (Device operational, no power saving) |
---|
138 | |
---|
139 | Bus 0 (PCI), Device Number 16, Device Function 0 |
---|
140 | Vendor 1106h VIA Technologies Inc |
---|
141 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
142 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
143 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
144 | Revision 80h, Header Type 80h, Bus Latency Timer 20h |
---|
145 | Self test 00h (Self test not supported) |
---|
146 | Cache line size 32 Bytes (8 DWords) |
---|
147 | PCI Class Serial, type USB (UHCI) |
---|
148 | Subsystem ID 80A11043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
149 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
150 | Address 0 is not present or not configured! |
---|
151 | Address 1 is not present or not configured! |
---|
152 | Address 2 is not present or not configured! |
---|
153 | Address 3 is not present or not configured! |
---|
154 | Address 4 is an I/O Port : A800h..A813h |
---|
155 | System IRQ 3, INT# A |
---|
156 | New Capabilities List Present: |
---|
157 | Power Management Capability, Version 1.1 |
---|
158 | Supports low power State D1 |
---|
159 | Supports low power State D2 |
---|
160 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
161 | PME# signalling is currently disabled |
---|
162 | 3.3v AUX Current required : 375 mA |
---|
163 | Current Power State : D0 (Device operational, no power saving) |
---|
164 | |
---|
165 | Bus 0 (PCI), Device Number 16, Device Function 1 |
---|
166 | Vendor 1106h VIA Technologies Inc |
---|
167 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
168 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
169 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
170 | Revision 80h, Header Type 80h, Bus Latency Timer 20h |
---|
171 | Self test 00h (Self test not supported) |
---|
172 | Cache line size 32 Bytes (8 DWords) |
---|
173 | PCI Class Serial, type USB (UHCI) |
---|
174 | Subsystem ID 80A11043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
175 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
176 | Address 0 is not present or not configured! |
---|
177 | Address 1 is not present or not configured! |
---|
178 | Address 2 is not present or not configured! |
---|
179 | Address 3 is not present or not configured! |
---|
180 | Address 4 is an I/O Port : A400h..A413h |
---|
181 | System IRQ 3, INT# B |
---|
182 | New Capabilities List Present: |
---|
183 | Power Management Capability, Version 1.1 |
---|
184 | Supports low power State D1 |
---|
185 | Supports low power State D2 |
---|
186 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
187 | PME# signalling is currently disabled |
---|
188 | 3.3v AUX Current required : 375 mA |
---|
189 | Current Power State : D0 (Device operational, no power saving) |
---|
190 | |
---|
191 | Bus 0 (PCI), Device Number 16, Device Function 2 |
---|
192 | Vendor 1106h VIA Technologies Inc |
---|
193 | Device 3038h VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets) |
---|
194 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
195 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
196 | Revision 80h, Header Type 80h, Bus Latency Timer 20h |
---|
197 | Self test 00h (Self test not supported) |
---|
198 | Cache line size 32 Bytes (8 DWords) |
---|
199 | PCI Class Serial, type USB (UHCI) |
---|
200 | Subsystem ID 80A11043h VT82xxxxx UHCI USB Controller (Guess Only!) |
---|
201 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
202 | Address 0 is not present or not configured! |
---|
203 | Address 1 is not present or not configured! |
---|
204 | Address 2 is not present or not configured! |
---|
205 | Address 3 is not present or not configured! |
---|
206 | Address 4 is an I/O Port : A000h..A013h |
---|
207 | System IRQ 3, INT# C |
---|
208 | New Capabilities List Present: |
---|
209 | Power Management Capability, Version 1.1 |
---|
210 | Supports low power State D1 |
---|
211 | Supports low power State D2 |
---|
212 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
213 | PME# signalling is currently disabled |
---|
214 | 3.3v AUX Current required : 375 mA |
---|
215 | Current Power State : D0 (Device operational, no power saving) |
---|
216 | |
---|
217 | Bus 0 (PCI), Device Number 16, Device Function 3 |
---|
218 | Vendor 1106h VIA Technologies Inc |
---|
219 | Device 3104h VT6202/12 USB 2.0 Enhanced Host Controller |
---|
220 | Command 0017h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate) |
---|
221 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
222 | Revision 82h, Header Type 00h, Bus Latency Timer 20h |
---|
223 | Self test 00h (Self test not supported) |
---|
224 | Cache line size 32 Bytes (8 DWords) |
---|
225 | PCI Class Serial, type USB 2.0 (EHCI) |
---|
226 | Subsystem ID 80A11043h VT6202 USB 2.0 Enhanced Host Controller (Guess Only!) |
---|
227 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
228 | Address 0 is a Memory Address (0-4GiB) : ED800000h..ED800093h |
---|
229 | System IRQ 3, INT# D |
---|
230 | New Capabilities List Present: |
---|
231 | Power Management Capability, Version 1.1 |
---|
232 | Supports low power State D1 |
---|
233 | Supports low power State D2 |
---|
234 | Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold |
---|
235 | PME# signalling is currently disabled |
---|
236 | 3.3v AUX Current required : 375 mA |
---|
237 | Current Power State : D0 (Device operational, no power saving) |
---|
238 | |
---|
239 | Bus 0 (PCI), Device Number 17, Device Function 0 |
---|
240 | Vendor 1106h VIA Technologies Inc |
---|
241 | Device 3177h VT8235 PCI to ISA Bridge |
---|
242 | Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles) |
---|
243 | Status 0210h (Has Capabilities List, Medium Timing) |
---|
244 | Revision 00h, Header Type 80h, Bus Latency Timer 00h |
---|
245 | Self test 00h (Self test not supported) |
---|
246 | PCI Class Bridge, type PCI to ISA |
---|
247 | Subsystem ID 80A11043h Unknown |
---|
248 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
249 | New Capabilities List Present: |
---|
250 | Power Management Capability, Version 1.1 |
---|
251 | Does not support low power State D1 or D2 |
---|
252 | Does not support PME# signalling |
---|
253 | Current Power State : D0 (Device operational, no power saving) |
---|
254 | |
---|
255 | Bus 0 (PCI), Device Number 17, Device Function 1 |
---|
256 | Vendor 1106h VIA Technologies Inc |
---|
257 | Device 0571h VT82xxxx EIDE Controller (All VIA Chipsets) |
---|
258 | Command 0007h (I/O Access, Memory Access, BusMaster) |
---|
259 | Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., |
---|
260 | Medium Timing) |
---|
261 | Revision 06h, Header Type 00h, Bus Latency Timer 20h |
---|
262 | Self test 00h (Self test not supported) |
---|
263 | PCI Class Storage, type IDE (ATA) |
---|
264 | PCI EIDE Controller Features : |
---|
265 | BusMaster EIDE is supported |
---|
266 | Primary Channel is at I/O Port 01F0h and IRQ 14 |
---|
267 | Secondary Channel is at I/O Port 0170h and IRQ 15 |
---|
268 | Subsystem ID 80A11043h VT82xxxx EIDE Controller (All VIA Chipsets) (Guess Only!) |
---|
269 | Subsystem Vendor 1043h ASUSTeK Computer Inc |
---|
270 | Address 0 is not present or not configured! |
---|
271 | Address 1 is not present or not configured! |
---|
272 | Address 2 is not present or not configured! |
---|
273 | Address 3 is not present or not configured! |
---|
274 | Address 4 is an I/O Port : 9800h..9807h |
---|
275 | System IRQ (disabled), INT# A |
---|
276 | New Capabilities List Present: |
---|
277 | Power Management Capability, Version 1.1 |
---|
278 | Does not support low power State D1 or D2 |
---|
279 | Does not support PME# signalling |
---|
280 | Current Power State : D0 (Device operational, no power saving) |
---|
281 | |
---|
282 | Bus 1 (AGP), Device Number 0, Device Function 0 |
---|
283 | Vendor 1002h ATI Technologies Inc |
---|
284 | Device 5157h Radeon 7500 Series (RV200) |
---|
285 | Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles) |
---|
286 | Status 02B0h (Has Capabilities List, Supports 66MHz, |
---|
287 | Supports Back-To-Back Trans., Medium Timing) |
---|
288 | Revision 00h, Header Type 00h, Bus Latency Timer 40h |
---|
289 | Minimum Bus Grant 08h, Maximum Bus Latency 00h |
---|
290 | Self test 00h (Self test not supported) |
---|
291 | Cache line size 32 Bytes (8 DWords) |
---|
292 | PCI Class Display, type VGA |
---|
293 | Subsystem ID 7161174Bh Radeon 7500LE (Guess Only!) |
---|
294 | Subsystem Vendor 174Bh PC Partner Ltd |
---|
295 | Address 0 is a Memory Address (0-4GiB, Prefetchable) : F0000000h |
---|
296 | Address 1 is an I/O Port : D800h |
---|
297 | Address 2 is a Memory Address (0-4GiB) : EF000000h |
---|
298 | System IRQ 11, INT# A |
---|
299 | Expansion ROM of 128 KiB decoded by this card, currently disabled |
---|
300 | New Capabilities List Present: |
---|
301 | AGP Capability, Version 2.0 (AGP 4x and below support) |
---|
302 | AGP Speed(s) Supported : 1x 2x 4x |
---|
303 | FW Transfers Supported : No |
---|
304 | >4GiB Address Space Supported : No |
---|
305 | Sideband Addressing Supported : Yes |
---|
306 | Maximum Command Queue Length : 48 bytes |
---|
307 | AGP Speed Selected : 4x |
---|
308 | FW Transfers Enabled : No |
---|
309 | >4GiB Address Space Enabled : No |
---|
310 | AGP Enabled : Yes |
---|
311 | Sideband Addressing Enabled : Yes |
---|
312 | Current Command Queue Length : 32 bytes |
---|
313 | Power Management Capability, Version 1.1 |
---|
314 | Supports low power State D1 |
---|
315 | Supports low power State D2 |
---|
316 | Does not support PME# signalling |
---|
317 | Current Power State : D0 (Device operational, no power saving) |
---|
318 | |
---|
319 | ROM PCI IRQ routing table Tests.... |
---|
320 | ROM IRQ routing table found at F000h:1F40h |
---|
321 | Table Version 1.0 - OK |
---|
322 | Table size 240 bytes - OK |
---|
323 | Table Checksum 1Eh - OK |
---|
324 | PCI Interrupt Router: VT8235 PCI to ISA Bridge |
---|
325 | IRQ's dedicated to PCI : None |
---|
326 | The ROM PCI IRQ routing table appears to be OK. |
---|
327 | |
---|
328 | IRQ Summary: IRQs 3,10,11,14,15 are used by PCI devices |
---|
329 | Shared IRQs: IRQ 3 is shared by 4 PCI Devices |
---|
330 | IRQ 11 is shared by 2 PCI Devices |
---|