#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/apache2" will be interpreted by the
# server as "/apache2/logs/foo.log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:\Server\apache2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `# LoadModule ' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule  foo_module modules/mod_foo.dll
#

LoadModule actions_module modules/actions.dll
LoadModule alias_module modules/alias.dll
LoadModule asis_module modules/asis.dll
# LoadModule authn_anon_module modules/authn_an.dll
# LoadModule authn_dbd_module modules/authn_db.dll
# LoadModule authn_default_module modules/authn_de.dll
LoadModule authn_file_module modules/authn_fi.dll
# LoadModule authz_dbm_module modules/authz_db.dll
# LoadModule authz_default_module modules/authz_de.dll
LoadModule authz_groupfile_module modules/authz_gr.dll
LoadModule authz_host_module modules/authz_ho.dll
# LoadModule authz_owner_module modules/authz_ow.dll
LoadModule authz_user_module modules/authz_us.dll
LoadModule auth_basic_module modules/auth_bas.dll
# LoadModule auth_digest_module modules/auth_dig.dll
LoadModule autoindex_module modules/autoinde.dll
# LoadModule cern_meta_module modules/cern_met.dll
LoadModule cgi_module modules/cgi.dll
# LoadModule charset_lite_module modules/charset_.dll
# LoadModule dav_module modules/dav.dll
# LoadModule dav_fs_module modules/dav_fs.dll
# LoadModule dbd_module modules/dbd.dll
# LoadModule deflate_module modules/deflate.dll
LoadModule dir_module modules/dir.dll
# LoadModule dumpio_module modules/dumpio.dll
# LoadModule echo_module modules/echo.dll
LoadModule env_module modules/env.dll
# LoadModule expires_module modules/expires.dll
# LoadModule ext_filter_module modules/ext_filt.dll
# LoadModule filter_module modules/filter.dll
LoadModule headers_module modules/headers.dll
# LoadModule ident_module modules/ident.dll
# LoadModule imagemap_module modules/imagemap.dll
LoadModule include_module modules/include.dll
# LoadModule info_module modules/info.dll
LoadModule log_config_module modules/log_conf.dll
# LoadModule log_forensic_module modules/log_fore.dll
LoadModule mime_module modules/mime.dll
# LoadModule mime_magic_module modules/mime_mag.dll
LoadModule negotiation_module modules/negotiat.dll
# LoadModule proxy_module modules/proxy.dll
# LoadModule proxy_ajp_module modules/proxy_aj.dll
# LoadModule proxy_balancer_module modules/proxy_ba.dll
# LoadModule proxy_connect_module modules/proxy_co.dll
# LoadModule proxy_ftp_module modules/proxy_ft.dll
# LoadModule proxy_http_module modules/proxy_ht.dll
LoadModule rewrite_module modules/rewrite.dll
LoadModule setenvif_module modules/setenvif.dll
# LoadModule speling_module modules/speling.dll
# LoadModule ssl_module modules/ssl.dll
LoadModule status_module modules/status.dll
# LoadModule unique_id_module modules/unique_i.dll
LoadModule userdir_module modules/userdir.dll
# LoadModule usertrack_module modules/usertrac.dll
# LoadModule version_module modules/version.dll
# LoadModule vhost_alias_module modules/vhost_al.dll

# PassEnv PERLLIB_PREFIX
PassEnv PERLLIB

<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>

HostnameLookups Double
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin J.Schoell@pegasus-sun.de

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName pegasus-sun.dyndns.org:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
# DocumentRoot "D:\Server\apache2\htdocs"
DocumentRoot "E:\WebServer\Internet"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "E:\WebServer\Internet">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    # AllowOverride AuthConfig
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

<Directory />
    Options FollowSymLinks
    AllowOverride AuthConfig
    Order deny,allow
    Allow from all
</Directory>

<Directory "E:\WebServer\Internet\Friends">
    AuthType Basic
    AuthName "Nur fuer Freunde"
    AuthUserFile D:\Server\apache2\conf\htuser.pwd
    AuthGroupFile D:\Server\apache2\conf\htgroups.grp
    Require group friends
    # Options FollowSymLinks
    Options -Indexes
    AllowOverride AuthConfig
    Order allow,deny
    Allow from 10.1.1
    Satisfy any
</Directory>

#<Directory "E:\WebServer\Internet\Uploader">
#    AuthType Basic
#    AuthName "Upload Bereich"
#    AuthUserFile D:\Server\apache2\conf\htuser.pwd
#    AuthGroupFile D:\Server\apache2\conf\htgroups.grp
#    Require group upload
    # Options FollowSymLinks
#    Options -Indexes
#    AllowOverride AuthConfig
#    Order allow,deny
#    Allow from all
#    Satisfy any
#</Directory>

<Directory "E:\WebServer\Internet\ClanSphere">
#    AuthType Basic
#    AuthName "Nur fuer die Community"
#    AuthUserFile D:\Server\apache2\conf\htuser.pwd
#    AuthGroupFile D:\Server\apache2\conf\htgroups.grp
#    Require group family friends friends-chr
    # Options FollowSymLinks
    AllowOverride AuthConfig
    Order allow,deny
    Allow from all
#    Allow from 10.1.1
#    Satisfy any
</Directory>


<Directory "E:\WebServer\Home">
    AuthType Basic
    AuthName "Nur fuer die Familie"
    AuthUserFile D:\Server\apache2\conf\htuser.pwd
    AuthGroupFile D:\Server\apache2\conf\htgroups.grp
    Require group family
    # Options FollowSymLinks
    AllowOverride AuthConfig
    Order allow,deny
    Allow from 10.1.1
    Satisfy any
</Directory>

<Directory "E:\WebServer\Home\Webalizer">
    AuthType Basic
    AuthName "Nur fuer die Familie"
    AuthUserFile D:\Server\apache2\conf\htuser.pwd
    AuthGroupFile D:\Server\apache2\conf\htgroups.grp
    Require group admin
    # Options FollowSymLinks
    AllowOverride AuthConfig
    Order allow,deny
    Allow from 10.1.1
    Satisfy any
</Directory>

<Directory "E:\WebServer\Home\Webalizer\Analog">
Options +Indexes
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog D:\Log\Apache\error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
# LogLevel warn
LogLevel debug

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l \"%u\" %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog D:\Log\Apache\access_log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog D:\Log\Apache\access_log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    Alias /Bilder "E:\WebServer\Home\Album"
    Alias /Home "E:\WebServer\Home"
    # Alias /Friends/Upload "E:\WebServer\Internet\Friends\Upload"

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "E:/WebServer/Internet/cgi-bin/"
    # ScriptAlias /cgi-bin/ "D:/Server/apache2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "E:/WebServer/Internet/cgi-bin/samba">
    AllowOverride All
    Options None
    Order allow,deny
    Allow from all
    AuthName "Samba Web Admin Tool"
    AuthType Basic
    AuthUserFile D:\Server\apache2\conf\htuser.pwd
    require valid-user
</Directory>

<Directory "E:/WebServer/Internet/cgi-bin">
    AllowOverride All
    Options None
#    Options +ExecCGI +Includes
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl
    AddHandler cgi-script .exe

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

LoadModule php5_module modules/modphp5.dll
ScriptAlias /php/ "D:\Server\php5"
AddType application/x-httpd-php .php
AddType application/x-httpd-php .php5
AddType application/x-httpd-php .phtml
AddType application/x-httpd-php-source .phps 


#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing HTMLTable IgnoreCase FoldersFirst
IndexOrderDefault Ascending Name

# We include the /icons/ alias for FancyIndexed directory listings.  If
# you do not use FancyIndexing, you may comment this out.
#
Alias /icons "D:\Server\apache2\icons"

<Directory "D:\Server\apache2\icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes. 
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
