.\"Generated by db2man.xsl. Don't modify this, modify the source. .de Sh \" Subsection .br .if t .Sp .ne 5 .PP \fB\\$1\fR .PP .. .de Sp \" Vertical space (when we can't use .PP) .if t .sp .5v .if n .sp .. .de Ip \" List item .br .ie \\n(.$>=3 .ne \\$3 .el .ne 3 .IP "\\$1" \\$2 .. .TH "SMBMOUNT" 8 "" "" "" .SH NAME smbmount \- mount an smbfs filesystem .SH "SYNOPSIS" .ad l .hy 0 .HP 9 \fBsmbmount\fR {service} {mount\-point} [\-o\ options] .ad .hy .SH "DESCRIPTION" .PP \fBsmbmount\fR mounts a Linux SMB filesystem\&. It is usually invoked as \fBmount\&.smbfs\fR by the \fBmount\fR(8) command when using the "\-t smbfs" option\&. This command only works in Linux, and the kernel must support the smbfs filesystem\&. .PP Options to \fBsmbmount\fR are specified as a comma\-separated list of key=value pairs\&. It is possible to send options other than those listed here, assuming that smbfs supports them\&. If you get mount failures, check your kernel log for errors on unknown options\&. .PP \fBsmbmount\fR is a daemon\&. After mounting it keeps running until the mounted smbfs is umounted\&. It will log things that happen when in daemon mode using the "machine name" smbmount, so typically this output will end up in \fIlog\&.smbmount\fR\&. The \fB smbmount\fR process may also be called mount\&.smbfs\&. .RS .Sh "Note" .PP \fBsmbmount\fR calls \fBsmbmnt\fR(8) to do the actual mount\&. You must make sure that \fBsmbmnt\fR is in the path so that it can be found\&. .RE .SH "OPTIONS" .TP username= specifies the username to connect as\&. If this is not given, then the environment variable \fB USER\fR is used\&. This option can also take the form "user%password" or "user/workgroup" or "user/workgroup%password" to allow the password and workgroup to be specified as part of the username\&. .TP password= specifies the SMB password\&. If this option is not given then the environment variable PASSWD is used\&. If it can find no password\fBsmbmount\fR will prompt for a password, unless the guest option is given\&. Note that passwords which contain the argument delimiter character (i\&.e\&. a comma ',') will failed to be parsed correctly on the command line\&. However, the same password defined in the PASSWD environment variable or a credentials file (see below) will be read correctly\&. .TP credentials= specifies a file that contains a username and/or password\&. The format of the file is: .nf username = password = .fi This is preferred over having passwords in plaintext in a shared file, such as \fI/etc/fstab\fR\&. Be sure to protect any credentials file properly\&. .TP krb Use kerberos (Active Directory)\&. .TP netbiosname= sets the source NetBIOS name\&. It defaults to the local hostname\&. .TP uid= sets the uid that will own all files on the mounted filesystem\&. It may be specified as either a username or a numeric uid\&. .TP gid= sets the gid that will own all files on the mounted filesystem\&. It may be specified as either a groupname or a numeric gid\&. .TP port= sets the remote SMB port number\&. The default is 445, fallback is 139\&. .TP fmask= sets the file mask\&. This determines the permissions that remote files have in the local filesystem\&. This is not a umask, but the actual permissions for the files\&. The default is based on the current umask\&. .TP dmask= Sets the directory mask\&. This determines the permissions that remote directories have in the local filesystem\&. This is not a umask, but the actual permissions for the directories\&. The default is based on the current umask\&. .TP debug= Sets the debug level\&. This is useful for tracking down SMB connection problems\&. A suggested value to start with is 4\&. If set too high there will be a lot of output, possibly hiding the useful output\&. .TP ip= Sets the destination host or IP address\&. .TP workgroup= Sets the workgroup on the destination .TP sockopt= Sets the TCP socket options\&. See the \fBsmb\&.conf\fR(5) \fIsocket options\fR option\&. .TP scope= Sets the NetBIOS scope .TP guest Don't prompt for a password .TP ro mount read\-only .TP rw mount read\-write .TP iocharset= sets the charset used by the Linux side for codepage to charset translations (NLS)\&. Argument should be the name of a charset, like iso8859\-1\&. (Note: only kernel 2\&.4\&.0 or later) .TP codepage= sets the codepage the server uses\&. See the iocharset option\&. Example value cp850\&. (Note: only kernel 2\&.4\&.0 or later) .TP ttl= sets how long a directory listing is cached in milliseconds (also affects visibility of file size and date changes)\&. A higher value means that changes on the server take longer to be noticed but it can give better performance on large directories, especially over long distances\&. Default is 1000ms but something like 10000ms (10 seconds) is probably more reasonable in many cases\&. (Note: only kernel 2\&.4\&.2 or later) .SH "ENVIRONMENT VARIABLES" .PP The variable \fBUSER\fR may contain the username of the person using the client\&. This information is used only if the protocol level is high enough to support session\-level passwords\&. The variable can be used to set both username and password by using the format username%password\&. .PP The variable \fBPASSWD\fR may contain the password of the person using the client\&. This information is used only if the protocol level is high enough to support session\-level passwords\&. .PP The variable \fBPASSWD_FILE\fR may contain the pathname of a file to read the password from\&. A single line of input is read and used as the password\&. .SH "OTHER COMMANDS" .PP File systems that have been mounted using the \fBsmbmount\fR can be unmounted using the \fBsmbumount\fR or the UNIX system\fBumount\fR command\&. .SH "BUGS" .PP Passwords and other options containing , can not be handled\&. For passwords an alternative way of passing them is in a credentials file or in the PASSWD environment\&. .PP The credentials file does not handle usernames or passwords with leading space\&. .PP One smbfs bug is important enough to mention here, even if it is a bit misplaced: .TP 3 \(bu Mounts sometimes stop working\&. This is usually caused by smbmount terminating\&. Since smbfs needs smbmount to reconnect when the server disconnects, the mount will eventually go dead\&. An umount/mount normally fixes this\&. At least 2 ways to trigger this bug are known\&. .LP .PP Note that the typical response to a bug report is suggestion to try the latest version first\&. So please try doing that first, and always include which versions you use of relevant software when reporting bugs (minimum: samba, kernel, distribution) .SH "SEE ALSO" .PP Documentation/filesystems/smbfs\&.txt in the linux kernel source tree may contain additional options and information\&. .PP FreeBSD also has a smbfs, but it is not related to smbmount .PP For Solaris, HP\-UX and others you may want to look at \fBsmbsh\fR(1) or at other solutions, such as Sharity or perhaps replacing the SMB server with a NFS server\&. .SH "AUTHOR" .PP Volker Lendecke, Andrew Tridgell, Michael H\&. Warfield and others\&. .PP The current maintainer of smbfs and the userspace tools \fBsmbmount\fR, \fBsmbumount\fR, and \fBsmbmnt\fR is Urban Widmark\&. The SAMBA Mailing list is the preferred place to ask questions regarding these programs\&. .PP The conversion of this manpage for Samba 2\&.2 was performed by Gerald Carter\&. The conversion to DocBook XML 4\&.2 for Samba 3\&.0 was done by Alexander Bokovoy\&.