Changes between Version 8 and Version 9 of Troubleshooting

Timestamp:

Dec 18, 2012, 3:40:00 PM (11 years ago)

Author:

David Azarewicz

Comment:

--

Troubleshooting

@@ -15 +15 @@
 If you have problems with the custom resolution feature, the !PanoUtil.exe program can be used to control the custom resolution functions. 
 If you happen to boot to a resolution that cannot be displayed, you can type CTL-ALT-DEL to activate the 
-CAD handler and go to a command prompt to execute these commands. If CTL-ALT-DEL does not work you can boot to a command line using ALT-F1 then F2 and use the !PanoUtil command that way.
+CAD handler and go to a command prompt to execute these commands. If CTL-ALT-DEL does not work you can boot to the maintenance desktop using ALT-F1 then F4, or boot a different partition. If running the !PanoUtil command from a maintenance desktop or from a different partition you must specify the drive to operate on.
 
 To reset all the custom resolution settings to the default and set the PM resolution to 800x600:
@@ -49 +49 @@
 }}}
 
-All of these commands can also be executed from a different boot partition if you specify the drive to operate on. For example, to change the settings on drive d:, add the drive specification to the end of the desired command:
+All of these commands can also be executed from a different boot partition or from the maintenance desktop if you specify the drive to operate on. For example, to change the settings on drive d:, add the drive specification to the end of the desired command:
 {{{
 PanoUtil -s d: