Custom Query (41 matches)

Hi David,

I installed the r8169 beta driver. If i connect to Irc, or connect with FF or with mail all works well. But as soon i use Qbittorrent and i load a torrent file within 15 sec the comps hangs solid. Even the reset button don't work, have to push the on button for 5 sec and then it's rebooting.

I don't know if it's relevant but with the multimac driver i had when i download several torrents or nzb files from newsgroups the comp became verry slow, seems the downloads takes all the sources to get it. Sometimes i just had to wait till downloads where done.

I have a 150Mbit down and a 10mbit up

I attach the trace log and the testlog

Would it be possible to also add a direct download link for the NVETH and E1000E drivers? Like the one for the RTL. IMHO it would make the life a bit easier.

I have a Realtek ethernet driver working with RTL8169 driver from eCS 2.0. For that driver I need to specify NetAddress?. I installed beta 1, and networking does not start.

Output of ifconfig and lantran.log are attached. PCI dump of the ethernet adapter follows.

Bus 3 (PCI Express), Device Number 0, Device Function 0

Vendor 10ECh Realtek Semiconductor Co., Ltd. Device 8168h RTL8111/8168B PCI Express Gigabit Ethernet controller Command 0007h (I/O Access, Memory Access, BusMaster?) Status 0010h (Has Capabilities List, Fast Timing) Revision 03h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Network, type Ethernet Subsystem ID 0DC4105Bh Unknown Subsystem Vendor 105Bh Foxconn International, Inc. Address 0 is an I/O Port : E800h..E8FFh Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit, Prefetchable) : DEFFF000h Address 4 is a Memory Address (64-bit, Prefetchable) : DEFF8000h System IRQ 11, INT# A Expansion ROM of 128 KiB decoded by this card, currently disabled New Capabilities List Present:

Power Management Capability, Version 1.2

Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving)

Message Signalled Interrupt Capability

MSI is disabled MSI function can generate 64-bit addresses

PCI Express Capability, Version 2

Device/Port? Type :

PCI Express Endpoint Device

Device Capabilities :

Unsupported Request Severity is Fatal

Device Status :

Correctable Error Detected Unsupported Request Detected AUX Power Detected

Link Capabilities :

Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0

Link Control :

Common Clock Configuration In Use

Link Status :

Current Link speed : 2.5Gb/s Current Link Width : x1

MSI-X Capability Vital Product Data Capability

VPD Data not present