Custom Query (41 matches)

I am running eCS 2.0 on Intel H55 chipset i3 CPU system with 4GB RAM. The NIC is:

Bus 1 (PCI Express), Device Number 0, Device Function 0

Vendor 10ECh Realtek Semiconductor Co., Ltd. Device 8168h RTL8111/8168B PCI Express Gigabit Ethernet controller Command 0007h (I/O Access, Memory Access, BusMaster?) Status 0010h (Has Capabilities List, Fast Timing) Revision 03h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Network, type Ethernet Subsystem ID 76361462h Onboard RTL8111b on MSI P965 Platinum Mainboard (Guess Only!) Subsystem Vendor 1462h Micro-Star International Co., Ltd. Address 0 is an I/O Port : D800h Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit, Prefetchable) : FAFFF000h Address 4 is a Memory Address (64-bit, Prefetchable) : FAFF8000h System IRQ 11, INT# A Expansion ROM of 128 KiB decoded by this card, currently disabled New Capabilities List Present:

Power Management Capability, Version 1.2

Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving)

Message Signalled Interrupt Capability

MSI is disabled MSI function can generate 64-bit addresses

PCI Express Capability, Version 2

Device/Port? Type :

PCI Express Endpoint Device

Device Capabilities :

Unsupported Request Severity is Fatal

Device Status :

Correctable Error Detected Unsupported Request Detected AUX Power Detected

Link Capabilities :

Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0

Link Control :

Asynchronous Clocking in Use

Link Status :

Current Link speed : 2.5Gb/s Current Link Width : x1

MSI-X Capability Vital Product Data Capability

VPD Data not present

With the latest beta (0.1.3) I cannot connect to the network. LANTRAN.LOG says:

IBM OS/2 NETBIOS 4.0 Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications. NETBIOS 4.0 is loaded and operational. IBM LANVDD is loaded and operational. IBM OS/2 LAN Netbind PRO0021: A general failure occurred when the program tried to bind TCPIP_NIF to R8110_NIF. TCPBEUI: Logical adapter 0 is trying to bind to TCP/IP interface lan0. LT00141: Errors occurred while attempting to initialize TCPBEUI.

I am able to connect using the beta dated 2-14-2011 if I set the NETADDRESS manually (I am typing this using that). I tried using the NIF from that beta with the new OS2 file, but it does not work either.

Does not work for 8168. New ticket as the other realtek tickets as far as I can see do not include serial debug output, I can compile the driver by myself when someone checks in corrected files to svn, I can log debug out from com1 and I'm willing to test any change to get this chip running.

Driver version (revision 18)

{0}[q:\ibmcom\macs] bldlevel R8110.os2 Build Level Display Facility Version 6.12.675 Sep 25 2001 (C) Copyright IBM Corporation 1993-2001 Signature: @#Mensys BV:0.1#@##1## 25 Apr 2011 11:06:33 BANZAI ::::2::Beta@@Realtek 8110/1Gb PCIe MAC Driver Vendor: Mensys BV Revision: 0.01 Date/Time?: 25 Apr 2011 11:06:33 Build Machine: BANZAI FixPak? Version: Beta File Version: 0.1.2 Description: Realtek 8110/1Gb PCIe MAC Driver

pci output -

Bus 4 (PCI Express), Device Number 0, Device Function 0 Vendor 10ECh Realtek Semiconductor Device 8168h RTL8168/8111 PCI-E Gigabit Ethernet NIC Command 0007h (I/O Access, Memory Access, BusMaster?) Status 0010h (Has Capabilities List, Fast Timing) Revision 01h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Network, type Ethernet Subsystem ID 360C1462h Unknown Subsystem Vendor 1462h Micro-Star International Co Ltd (MSI) Address 0 is an I/O Port : D800h Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit) : FEAFF000h System IRQ 5, INT# A Expansion ROM of 128 KiB decoded by this card, currently disabled New Capabilities List Present:

Power Management Capability, Version 1.1

Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving)

Vital Product Data Capability

VPD Data not present

Message Signalled Interrupt Capability

MSI is disabled MSI function can generate 64-bit addresses

PCI Express Capability, Version 1

Device/Port? Type :

PCI Express Endpoint Device

Device Capabilities :

Attention Button Present on Device Attention Indicator Present on Device Power Indicator Present on Device Unsupported Request Severity is Fatal

Device Status :

Correctable Error Detected Non-Fatal Error Detected Unsupported Request Detected AUX Power Detected

Link Capabilities :

Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0

Link Control :

Asynchronous Clocking in Use

Link Status :

Current Link speed : 2.5Gb/s Current Link Width : x1

Vendor-Dependant Capability

LANTRAN.LOG -

IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational. IBM OS/2 NETBEUI 6.00.0 NETBEUI: Using a 32-bit data segment. IBM OS/2 TCPBEUI 6.00.0 TCPBEUI: Using a 32-bit data segment. Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( May 25, 2005)

IBM OS/2 NETBIOS 4.0 Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications. Adapter 1 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications. NETBIOS 4.0 is loaded and operational. IBM OS/2 LAN Netbind PRO0021: A general failure occurred when the program tried to bind VECTOR to R8110_NIF. TCPBEUI: Logical adapter 1 is trying to bind to TCP/IP interface lan0. LT00141: Errors occurred while attempting to initialize TCPBEUI.

debug output - ProcessParms? DRIVERNAME

ProcessParms?

ProcessParms? DRIVERNAME

ProcessParms?

ProcessParms? DRIVERNAME

ProcessParms?

ProcessParms? DRIVERNAME

ProcessParms?

ProcessParms? DRIVERNAME

ProcessParms? MODE

ProcessParms? RXCHAIN

ProcessParms? return 0

checkDevice enter.

checkDevice. Dev 10EC 0

checkDevice Dev.setFlags FF7E1880

checkDevice rc=1 Dev.setName RTL8169sb/8110sb

RTL_DEVICE::setup enter.

Cannot find base address.

checkDevice enter.

checkDevice exit rc=0.

Hello Folks; I was using the rtgnda13.zip and thought I would try the R8110 driver, because rtgnda does not get the mac address. Although the driver, R8110$, appears to load at startup, there is no internet connection and lantran.log reports this:

IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational. IBM OS/2 LAN Netbind PRO0021: A general failure occurred when the program tried to bind TCPIP_NIF to R8110_NIF. Any ideas?