Changes between Version 1 and Version 2 of TracUpgrade


Ignore:
Timestamp:
Apr 13, 2011, 7:00:48 PM (13 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracUpgrade

    v1 v2  
    44== Instructions ==
    55
    6 Typically, there are five steps involved in upgrading to a newer version of Trac:
     6Typically, there are seven steps involved in upgrading to a newer version of Trac:
    77
    88=== 1. Update the Trac Code === #UpdatetheTracCode
     
    1010Get the new version as described in TracInstall, or your operating system specific procedure.
    1111
    12 If you installed a recent 0.11 version of Trac via {{{easy_install}}}, it might be the easiest to use it also to upgrade you Trac installation.
     12If you already have a 0.11 version of Trac installed via `easy_install`, it might be easiest to also use `easy_install` to upgrade your Trac installation:
    1313
    1414{{{
    15 # easy_install --upgrade Trac
     15# easy_install --upgrade Trac==0.12
    1616}}}
    1717
    18 If you do a manual (not operating system specific) upgrade, you should also stop any running Trac server before the installation. Doing "hot" upgrades is not advised, especially not on Windows ([trac:ticket:7625 #7265]).
     18If you do a manual (not operating system-specific) upgrade, you should also stop any running Trac servers before the installation. Doing "hot" upgrades is not advised, especially on Windows ([trac:#7265]).
    1919
    20 You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac .eggs from former versions.
    21 The location of the site-packages directory depends on the operating system, and the location in which Python was installed. However, the following locations are common:
    22  * on Linux: /usr/lib/python2.X/site-packages
    23  * on Windows: C:\Python2.X\lib\site-packages
    24  * on MacOSX: /Library/Python/2.X/site-packages
     20You may also want to remove the pre-existing Trac code by deleting the `trac` directory from the Python `lib/site-packages` directory, or remove Trac `.egg` files from former versions.
     21The location of the site-packages directory depends on the operating system and the location in which Python was installed. However, the following locations are typical:
     22 * on Linux: `/usr/lib/python2.X/site-packages`
     23 * on Windows: `C:\Python2.X\lib\site-packages`
     24 * on MacOSX: `/Library/Python/2.X/site-packages`
    2525
    26 You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac` (the exact location depends on your platform).
     26You may also want to remove the Trac `cgi-bin`, `htdocs`, `templates` and `wiki-default` directories that are commonly found in a directory called `share/trac`. (The exact location depends on your platform.)
    2727
    28 This cleanup is not mandatory, but it makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things.
    29 
    30 If you had the webadmin plugin installed, you can now uninstall it as it is now part of the Trac code base.
     28This cleanup is not mandatory, but makes it easier to troubleshoot issues later on, as you won't waste your time looking at code or templates from a previous release that are not being used anymore... As usual, make a backup before actually deleting things.
    3129
    3230=== 2. Upgrade the Trac Environment === #UpgradetheTracEnvironment
     
    4745}}}
    4846
    49 If you are using custom CSS styles or modified templates in the templates directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
    50 
    5147=== 3. Update the Trac Documentation === #UpdatetheTracDocumentation
    5248
     
    5652}}}
    5753
    58 Note that this procedure will of course leave your `WikiStart` page intact.
     54Note that this procedure will leave your `WikiStart` page intact.
    5955
    6056=== 4. Resynchronize the Trac Environment Against the Source Code Repository ===
     
    6359
    6460{{{
    65 trac-admin /path/to/projenv resync
     61trac-admin /path/to/projenv repository resync '*'
    6662}}}
    6763
    68 === 5. Steps specific to a given Trac version  ===
    69 ==== Upgrading to Trac 0.11 ====
    70 ===== Site Templates =====
    71 The templating engine has changed in 0.11, please look at TracInterfaceCustomization for more information.
     64=== 5. Refresh static resources ===
     65
     66If you have set up a web server to give out static resources directly (accessed using the `/chrome/` URL) then you will need to refresh them using the same command:
     67{{{
     68trac-admin /path/to/env deploy /deploy/path
     69}}}
     70this will extract static resources and CGI scripts (`trac.wsgi`, etc) from new Trac version and its plugins into `/deploy/path`.
     71
     72Some web browsers cache CSS and Javascript files persistently, so you may need to instruct your users to manually erase the contents of their browser's cache.
     73
     74=== 6. Steps specific to a given Trac version  ===
     75==== Upgrading from Trac 0.11 to Trac 0.12 ====
     76===== Python 2.3 no longer supported =====
     77The minimum supported version of python is now 2.4
     78
     79===== SQLite v3.x required =====
     80SQLite v2.x is no longer supported. If you still use a Trac database of this format, you'll need to convert it to SQLite v3.x first. See [trac:PySqlite#UpgradingSQLitefrom2.xto3.x] for details.
     81
     82===== PySqlite 2 required =====
     83PySqlite 1.1.x is no longer supported. Please install 2.5.5 or later if possible (see [#Tracdatabaseupgrade Trac database upgrade] below).
     84
     85===== Multiple Repository Support =====
     86The latest version includes support for multiple repositories. If you plan to add more repositories to your Trac instance, please refer to TracRepositoryAdmin#Migration.
     87
     88This may be of interest to users with only one repository, since there's now a way to avoid the potentially costly resync check at every request.
     89
     90===== Improved repository synchronization =====
     91In addition to supporting multiple repositories, there is now a more efficient method for synchronizing Trac and your repositories.
     92
     93While you can keep the same synchronization as in 0.11 adding the post-commit hook as outlined in TracRepositoryAdmin#Synchronization and TracRepositoryAdmin#ExplicitSync will allow more efficient synchronization and is more or less required for multiple repositories.
     94
     95Note that if you were using the `trac-post-commit-hook`, ''you're strongly advised to upgrade it'' to the new hook documented in the above references, as the old hook will not work with anything else than the default repository and even for this case, it won't trigger the appropriate notifications.
     96
     97===== Authz permission checking =====
     98The authz permission checking has been migrated to a fine-grained permission policy. If you use authz permissions (aka `[trac] authz_file` and `authz_module_name`), you must add `AuthzSourcePolicy` in front of your permission policies in `[trac] permission_policies`. You must also remove `BROWSER_VIEW`, `CHANGESET_VIEW`, `FILE_VIEW` and `LOG_VIEW` from your global permissions (with `trac-admin $ENV permission remove` or the "Permissions" admin panel).
     99
     100===== Microsecond timestamps =====
     101All timestamps in database tables (except the `session` table) have been changed from "seconds since epoch" to "microseconds since epoch" values. This change should be transparent to most users, except for custom reports. If any of your reports use date/time columns in calculations (e.g. to pass them to `datetime()`), you must divide the values retrieved from the database by 1'000'000. Similarly, if a report provides a calculated value to be displayed as a date/time (i.e. with a column named "time", "datetime", "changetime", "date", "created" or "modified"), you must provide a microsecond timestamp, that is, multiply your previous calculation with 1'000'000.
     102
     103==== Upgrading from Trac 0.10 to Trac 0.11 ====
     104===== Site Templates and Styles =====
     105The templating engine has changed in 0.11 to Genshi, please look at TracInterfaceCustomization for more information.
     106
     107If you are using custom CSS styles or modified templates in the `templates` directory of the TracEnvironment, you will need to convert them to the Genshi way of doing things. To continue to use your style sheet, follow the instructions at TracInterfaceCustomization#SiteAppearance.
    72108
    73109===== Trac Macros, Plugins =====
    74 The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
     110The Trac macros will need to be adapted, as the old-style wiki-macros are not supported anymore (due to the drop of [trac:ClearSilver] and the HDF); they need to be converted to the new-style macros, see WikiMacros. When they are converted to the new style, they need to be placed into the plugins directory instead and not wiki-macros, which is no longer scanned for macros or plugins.
    75111
    76112===== For FCGI/WSGI/CGI users =====
     
    82118This will create a deploy directory with the following two subdirectories: `cgi-bin` and `htdocs`. Then update your Apache configuration file `httpd.conf` with this new `trac.cgi` location and `htdocs` location.
    83119
    84 === 6. Restart the Web Server === #RestarttheWebServer
     120===== Web Admin plugin integrated =====
     121If you had the webadmin plugin installed, you can uninstall it as it is part of the Trac code base since 0.11.
     122
     123=== 7. Restart the Web Server === #RestarttheWebServer
    85124
    86125If you are not running [wiki:TracCgi CGI], reload the new Trac code by restarting your web server.
     
    91130If you use a trac parent env configuration and one of the plugins in one child does not work, none of the children work.
    92131
    93 === some core modules won't load ===
    94 This can happen in particular with Python 2.3 on Windows when upgrading without uninstalling first.
    95 Some modules were previously capitalized and were changed to lower case, e.g. trac/About.py became trac/about.py. You may find such messages in the Trac log:
    96 {{{
    97 ERROR: Skipping "trac.about = trac.about": (can't import "No module named about")
    98 }}}
    99 Remove the `Lib/site-packages/trac` folder and reinstall.
    100 
    101132=== Wiki Upgrade ===
    102133`trac-admin` will not delete or remove default wiki pages that were present in a previous version but are no longer in the new version.
    103134
     135=== Trac database upgrade ===
     136
     137A known issue in some versions of PySqlite (2.5.2-2.5.4) prevents the trac-admin upgrade script from successfully upgrading the database format. It is advised to use either a newer or older version of the sqlite python bindings to avoid this error. For more details see ticket [trac:#9434].
     138
     139== Upgrading Python ==
     140
     141Upgrading Python to a newer version will require reinstallation of Python packages: Trac of course; also [http://pypi.python.org/pypi/setuptools easy_install], if you've been using that.  Assuming you're using Subversion, you'll also need to upgrade the Python bindings for svn.
     142
     143=== Windows and Python 2.6 ===
     144
     145If you've been using !CollabNet's Subversion package, you may need to uninstall that in favor of [http://alagazam.net/ Algazam], which has the Python bindings readily available (see TracSubversion).  The good news is, that works with no tweaking.
    104146
    105147== Changing Database Backend ==
     
    110152== Older Versions ==
    111153
    112 For upgrades from versions older than Trac 0.10, refer first to trac:wiki:0.10/TracUpgrade.
    113 
    114 Note that downgrading from Trac 0.11 to Trac 0.10.4 or 0.10.5 is easy, but has to be done manually, e.g.
    115 {{{
    116 $ sqlite3 db/trac.db "update system set value=20 where name='database_version'"
    117 }}}
    118 (upgrade can be redone the normal way later on)
     154For upgrades from versions older than Trac 0.10, refer first to [trac:wiki:0.10/TracUpgrade#SpecificVersions].
    119155
    120156-----