BldLevel: @#D Azarewicz:1.31#@##1## 8 Aug 2013 14:56:02 DAZAR1 ::::::@@AHCI Driver (c) Mensys BV 2013 CmdLine: OS2AHCI.ADD /d:2 [2001] scanning PCI bus... [2783] Adapter 0 PCI=0:31:2 ID=8086:3b2f [2783] BAR #0: type = I/O, addr = 0x00001818, size = 8 [2783] BAR #1: type = I/O, addr = 0x0000180c, size = 4 [2783] BAR #2: type = I/O, addr = 0x00001810, size = 8 [2783] BAR #3: type = I/O, addr = 0x00001808, size = 4 [2783] BAR #4: type = I/O, addr = 0x00001840, size = 32 [2783] BAR #5: type = MEM, addr = 0xf2427000, size = 2048 [4568] Registered kernel exit routine for INT13 mode [4580] IORB 0668:8f42 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0) [4580] ahci_save_bios_config: BIOS AHCI mode is 0 [4580] AHCI global registers for adapter 0 0:31:2 irq=16 addr=0xf2427000 00: ff20ff65 - 64bit ncq sntf mps sss alpm led clo pio_multi ssc part ems sxs cmd_slots:32 ports:6 04: 80000000 - ahci_enabled 08: 00000000 0c: 00000033 10: 00010300 14: 00000000 18: 00000000 1c: 01600002 20: 07010000 24: 00000004 - apst [4580] ahci_scan_ports: scanning ports on adapter 0 [4580] ahci_scan_ports: Wait till not busy on port 0 [4580] ahci_reset_port: resetting port 0.0 [4580] AHCI port 0 registers: PORT_CMD = 0x4002006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x621 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x50000 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x400000 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [4580] ahci_stop_port 0.0 [4580] ahci_reset_port: setting link speed and power management options [4580] ahci_reset_port: issuing COMRESET on port 0 [4582] Wait for communication... [4593] ahci_reset_port: starting port 0 again [4593] ahci_start_port 0.0 [4593] ahci_start_port: PORT_SCR_STAT = 0x123 [4593] ahci_start_port: PORT_SCR_ERR = 0x0 [4625] ahci_reset_port: PORT_TFDATA = 0x150 [4625] ahci_scan_ports: port 0 seems to be attached to a device; probing... [4625] ATA command for 0.0.0, slot 0: [4625] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 35 ef 00 00 00 00 00 .........5...... [4625] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ [4625] sg_list: 0628:0580 98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [4625] executing polled cmd...[4656] SERR = 0x00010000[4656] failed [4656] ahci_reset_port: resetting port 0.0 [4656] AHCI port 0 registers: PORT_CMD = 0x400e017 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x221 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x10000 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x400002 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [4656] ahci_stop_port 0.0 [4656] ahci_reset_port: setting link speed and power management options [4656] ahci_reset_port: issuing COMRESET on port 0 [4656] Wait for communication... [4687] ahci_reset_port: starting port 0 again [4687] ahci_start_port 0.0 [4687] ahci_start_port: PORT_SCR_STAT = 0x123 [4687] ahci_start_port: PORT_SCR_ERR = 0x0 [4718] ahci_reset_port: PORT_TFDATA = 0x150 [4718] ATA command for 0.0.0, slot 0: [4718] cmd_hdr: 0628:0000 05 00 01 00 00 00 00 00-00 35 ef 00 00 00 00 00 .........5...... [4718] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............ [4718] sg_list: 0628:0580 98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [4718] executing polled cmd...[5218] TFDATA = 0x00000451[5218] failed [5218] ahci_reset_port: resetting port 0.0 [5218] AHCI port 0 registers: PORT_CMD = 0x4006017 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x1 link/device status: PORT_SCR_STAT = 0x123 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x451 interrupt status: PORT_IRQ_STAT = 0x40000001 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5218] ahci_stop_port 0.0 [5218] ahci_reset_port: setting link speed and power management options [5218] ahci_reset_port: issuing COMRESET on port 0 [5218] Wait for communication... [5250] ahci_reset_port: starting port 0 again [5250] ahci_start_port 0.0 [5250] ahci_start_port: PORT_SCR_STAT = 0x123 [5250] ahci_start_port: PORT_SCR_ERR = 0x0 [5281] ahci_reset_port: PORT_TFDATA = 0x150 [5281] ahci_stop_port 0.0 [5281] ahci_scan_ports: Wait till not busy on port 1 [5281] ahci_reset_port: resetting port 0.1 [5281] AHCI port 1 registers: PORT_CMD = 0xc0006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5281] ahci_stop_port 0.1 [5281] ahci_reset_port: setting link speed and power management options [5281] ahci_reset_port: issuing COMRESET on port 1 [5281] Wait for communication... [5312] ahci_reset_port: starting port 1 again [5312] ahci_start_port 0.1 [5312] ahci_start_port: PORT_SCR_STAT = 0x113 [5312] ahci_start_port: PORT_SCR_ERR = 0x0 [5312] ahci_reset_port: PORT_TFDATA = 0x100 [5312] ahci_scan_ports: port 1 seems to be attached to a device; probing... [5312] ATA command for 0.1.0, slot 0: [5312] cmd_hdr: 0628:7800 05 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 ................ [5312] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............ [5312] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ [5312] executing polled cmd...[5343] success [5343] ATA_IDENTIFY_PACKET results: 0610:2e98 c0 85 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 2e 31 ...............1 0610:2ec8 41 46 20 20 20 20 70 4f-69 74 72 61 20 63 56 44 AF pOitra cVD 0610:2ed8 20 44 57 52 41 20 2d 44-37 37 30 30 20 48 20 20 DWRA -D7700 H 0610:2ee8 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 .. 0610:2ef8 00 00 00 0f 00 40 00 02-00 02 06 00 00 00 00 00 .....@.......... 0610:2f08 00 00 00 00 00 00 00 00-00 00 00 00 00 00 07 00 ................ 0610:2f18 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... 0610:2f28 00 00 00 00 00 00 00 00-02 06 00 00 68 00 40 00 ............h.@. 0610:2f38 f8 01 00 00 18 42 00 40-00 40 18 42 00 00 00 40 .....B.@.@.B...@ 0610:2f48 3f 20 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ? .............. 0610:2f58 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f68 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f78 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f88 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2f98 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2fa8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2fb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2fc8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2fd8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2fe8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ff8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3008 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3018 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3028 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3038 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3048 00 00 00 00 00 00 00 00-00 00 00 00 1f 10 00 00 ................ 0610:3058 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3068 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3078 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:3088 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 21 ...............! [5343] found device 0.1.0: removable = 1, dev_type = 5, atapi = 1, ncq_max = 1 [5343] ahci_stop_port 0.1 [5343] ahci_scan_ports: Wait till not busy on port 4 [5343] ahci_reset_port: resetting port 0.4 [5343] AHCI port 4 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x0 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x7f interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5343] ahci_stop_port 0.4 [5343] ahci_reset_port: setting link speed and power management options [5343] ahci_reset_port: issuing COMRESET on port 4 [5345] Wait for communication... [5875] no device present after resetting port #4 (PORT_SCR_STAT = 0x0) [5875] ahci_stop_port 0.4 [5875] ahci_scan_ports: Wait till not busy on port 5 [5875] ahci_reset_port: resetting port 0.5 [5875] AHCI port 5 registers: PORT_CMD = 0x242006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x0 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x7f interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [5875] ahci_stop_port 0.5 [5875] ahci_reset_port: setting link speed and power management options [5875] ahci_reset_port: issuing COMRESET on port 5 [5875] Wait for communication... [6375] no device present after resetting port #5 (PORT_SCR_STAT = 0x0) [6375] ahci_stop_port 0.5 [6375] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 [6375] IORB 0668:8f42 removed (queue = 0610:59b8) [6375] IORB 0668:8f42 complete (status = 0x0001, error = 0x0000) [6527] IORB 06c0:03d0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0) [6527] IORB 06c0:03d0 removed (queue = 0610:59b8) [6527] IORB 06c0:03d0 complete (status = 0x0001, error = 0x0000) [6527] IORB 06c0:03d0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0) [6527] IORB 06c0:03d0 removed (queue = 0610:59b8) [6527] IORB 06c0:03d0 complete (status = 0x0001, error = 0x0000) [6529] IORB 06d0:c56c queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0) [6529] IORB 06d0:c56c removed (queue = 0610:59b8) [6529] IORB 06d0:c56c complete (status = 0x0001, error = 0x0000) [6535] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0610:59b8 [driver], timeout = 0) [6535] leaving initialization mode [6535] ahci_complete_init: completing initialization of adapter #0 [6535] registering interrupt #16 [6535] ahci_complete_init: resetting port 1 [6535] ahci_reset_port: resetting port 0.1 [6535] AHCI port 1 registers: PORT_CMD = 0xc0006 command engine status: PORT_SCR_ACT = 0x0 PORT_CMD_ISSUE = 0x0 link/device status: PORT_SCR_STAT = 0x113 PORT_SCR_CTL = 0x0 PORT_SCR_ERR = 0x0 PORT_TFDATA = 0x50 interrupt status: PORT_IRQ_STAT = 0x0 PORT_IRQ_MASK = 0x0 HOST_IRQ_STAT = 0x0 [6535] ahci_stop_port 0.1 [6535] ahci_reset_port: setting link speed and power management options [6535] ahci_reset_port: issuing COMRESET on port 1 [6537] Wait for communication... [6562] ahci_reset_port: starting port 1 again [6562] ahci_start_port 0.1 [6562] ahci_start_port: PORT_SCR_STAT = 0x113 [6562] ahci_start_port: PORT_SCR_ERR = 0x0 [6562] ahci_reset_port: PORT_TFDATA = 0x100 Adapter 0: PCI=0:31:2 ID=8086:2681 irq=16 addr=0xf2427000 version=10300 Port 0: No drive present Port 1: Drive 0: atapi removable Drive present but no information available. Not queried by OS. Port 2: No drive present Port 3: No drive present Port 4: No drive present Port 5: No drive present [6562] IORB 0130:0ca5 removed (queue = 0610:59b8) [6562] IORB 0130:0ca5 complete (status = 0x0001, error = 0x0000) [6605] IORB 08a8:cee0 queued (cmd = 1/1, queue = 0610:59b8 [driver], timeout = 0) [6605] IORB 08a8:cee0 removed (queue = 0610:59b8) [6605] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000) [6605] IORB 08a8:cee0 queued (cmd = 2/1, queue = 0610:5b74 [port], timeout = 0) [6605] IORB 08a8:cee0 removed (queue = 0610:5b74) [6605] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000) [6605] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [6605] ahci_execute_cdb(0.1.0): 08a8:cf64 00 00 00 00 00 00 ...... [6605] ATA command for 0.1.0, slot 1: [6605] cmd_hdr: 0628:7820 65 00 00 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [6605] ata_cmd: 1530:4d94 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [6605] atapi_cmd: 1530:4e12 00 00 00 00 00 00 00 00-00 00 00 00 ............ [6605] issuing command on slot 1 [6607] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [6607] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002 [6607] IORB 08a8:cee0 removed (queue = 0610:5b74) [6607] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000) [6812] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [6812] ahci_execute_cdb(0.1.0): 08a8:cf64 03 00 00 00 12 00 ...... [6812] ATA command for 0.1.0, slot 2: [6812] cmd_hdr: 0628:7840 25 00 01 00 00 00 00 00-00 b4 ef 00 00 00 00 00 %............... [6812] ata_cmd: 1530:4d94 05 00 00 00 00 00 00 00-00 00 a0 00 ............ [6812] atapi_cmd: 1530:4e12 03 00 00 00 12 00 00 00-00 00 00 00 ............ [6812] sg_list: 0628:8480 74 1f ec 00 00 00 00 00-00 00 00 00 11 00 00 00 t............... [6812] issuing command on slot 2 [6812] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [6812] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000004 [6812] IORB 08a8:cee0 removed (queue = 0610:5b74) [6812] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000) [7031] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [7031] ahci_execute_cdb(0.1.0): 08a8:cf64 12 00 00 00 2c 00 ....,. [7031] ATA command for 0.1.0, slot 3: [7031] cmd_hdr: 0628:7860 25 00 01 00 00 00 00 00-80 b7 ef 00 00 00 00 00 %............... [7031] ata_cmd: 1530:4d94 05 00 00 00 00 00 00 00-00 00 a0 00 ............ [7031] atapi_cmd: 1530:4e12 12 00 00 00 2c 00 00 00-00 00 00 00 ....,....... [7031] sg_list: 0628:8800 2a 5c eb 00 00 00 00 00-00 00 00 00 2b 00 00 00 *\..........+... [7031] issuing command on slot 3 [7031] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [7031] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000008 [7031] IORB 08a8:cee0 removed (queue = 0610:5b74) [7031] IORB 08a8:cee0 complete (status = 0x0001, error = 0x0000) [7250] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [7250] ahci_execute_cdb(0.1.0): 08a8:cf64 15 10 00 00 14 00 ...... [7250] ATA command for 0.1.0, slot 4: [7250] cmd_hdr: 0628:7880 65 00 01 00 00 00 00 00-00 bb ef 00 00 00 00 00 e............... [7250] ata_cmd: 1530:4d78 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7250] atapi_cmd: 1530:4df6 15 10 00 00 14 00 00 00-00 00 00 00 ............ [7250] sg_list: 0628:8b80 74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00 t............... [7250] issuing command on slot 4 [7250] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [7250] port #1 interrupt error status: 0x40000001; restarting port [7250] restart_ctxhook() started [7250] port 1, TF_DATA: 0x5451 [7250] PORT_CMD = 0x4 [7250] failing IORB: 08a8:cee0 [7250] ahci_stop_port 0.1 [7250] ahci_start_port 0.1 [7250] ahci_start_port: PORT_SCR_STAT = 0x113 [7250] ahci_start_port: PORT_SCR_ERR = 0x0 [7250] atapi_req_sense [7250] ATA command for 0.1.0, slot 0: [7250] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [7250] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7250] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [7250] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [7250] restart_ctxhook() completed [7250] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [7250] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [7250] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [7250] IORB 08a8:cee0 removed (queue = 0610:5b74) [7250] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102) [7468] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [7468] ahci_execute_cdb(0.1.0): 08a8:cf64 15 10 00 00 14 00 ...... [7468] ATA command for 0.1.0, slot 1: [7468] cmd_hdr: 0628:7820 65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [7468] ata_cmd: 1530:4d78 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7468] atapi_cmd: 1530:4df6 15 10 00 00 14 00 00 00-00 00 00 00 ............ [7468] sg_list: 0628:8100 74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00 t............... [7468] issuing command on slot 1 [7468] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [7468] port #1 interrupt error status: 0x40000001; restarting port [7468] restart_ctxhook() started [7468] port 1, TF_DATA: 0x5451 [7468] PORT_CMD = 0x1 [7468] failing IORB: 08a8:cee0 [7468] ahci_stop_port 0.1 [7468] ahci_start_port 0.1 [7468] ahci_start_port: PORT_SCR_STAT = 0x113 [7468] ahci_start_port: PORT_SCR_ERR = 0x0 [7468] atapi_req_sense [7468] ATA command for 0.1.0, slot 0: [7468] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [7468] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7468] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [7468] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [7468] restart_ctxhook() completed [7468] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [7468] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [7468] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [7468] IORB 08a8:cee0 removed (queue = 0610:5b74) [7468] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102) [7687] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [7687] ahci_execute_cdb(0.1.0): 08a8:cf64 15 10 00 00 14 00 ...... [7687] ATA command for 0.1.0, slot 1: [7687] cmd_hdr: 0628:7820 65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [7687] ata_cmd: 1530:4d78 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7687] atapi_cmd: 1530:4df6 15 10 00 00 14 00 00 00-00 00 00 00 ............ [7687] sg_list: 0628:8100 74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00 t............... [7687] issuing command on slot 1 [7687] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [7687] port #1 interrupt error status: 0x40000001; restarting port [7687] restart_ctxhook() started [7687] port 1, TF_DATA: 0x5451 [7687] PORT_CMD = 0x1 [7687] failing IORB: 08a8:cee0 [7687] ahci_stop_port 0.1 [7687] ahci_start_port 0.1 [7687] ahci_start_port: PORT_SCR_STAT = 0x113 [7687] ahci_start_port: PORT_SCR_ERR = 0x0 [7687] atapi_req_sense [7687] ATA command for 0.1.0, slot 0: [7687] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [7687] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7687] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [7687] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [7687] restart_ctxhook() completed [7687] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [7687] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [7687] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [7687] IORB 08a8:cee0 removed (queue = 0610:5b74) [7687] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102) [7906] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [7906] ahci_execute_cdb(0.1.0): 08a8:cf64 15 10 00 00 0c 00 ...... [7906] ATA command for 0.1.0, slot 1: [7906] cmd_hdr: 0628:7820 65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [7906] ata_cmd: 1530:4d94 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7906] atapi_cmd: 1530:4e12 15 10 00 00 0c 00 00 00-00 00 00 00 ............ [7906] sg_list: 0628:8100 74 1f ec 00 00 00 00 00-00 00 00 00 0b 00 00 00 t............... [7906] issuing command on slot 1 [7906] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [7906] port #1 interrupt error status: 0x40000001; restarting port [7906] restart_ctxhook() started [7906] port 1, TF_DATA: 0x5451 [7906] PORT_CMD = 0x1 [7906] failing IORB: 08a8:cee0 [7906] ahci_stop_port 0.1 [7906] ahci_start_port 0.1 [7906] ahci_start_port: PORT_SCR_STAT = 0x113 [7906] ahci_start_port: PORT_SCR_ERR = 0x0 [7906] atapi_req_sense [7906] ATA command for 0.1.0, slot 0: [7906] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [7906] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [7906] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [7906] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [7906] restart_ctxhook() completed [7906] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [7906] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [7906] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [7906] IORB 08a8:cee0 removed (queue = 0610:5b74) [7906] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102) [8125] IORB 08a8:cee0 queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [8125] ahci_execute_cdb(0.1.0): 08a8:cf64 15 10 00 00 14 00 ...... [8125] ATA command for 0.1.0, slot 1: [8125] cmd_hdr: 0628:7820 65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [8125] ata_cmd: 1530:4d94 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8125] atapi_cmd: 1530:4e12 15 10 00 00 14 00 00 00-00 00 00 00 ............ [8125] sg_list: 0628:8100 74 1f ec 00 00 00 00 00-00 00 00 00 13 00 00 00 t............... [8125] issuing command on slot 1 [8125] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [8125] port #1 interrupt error status: 0x40000001; restarting port [8125] restart_ctxhook() started [8125] port 1, TF_DATA: 0x5451 [8125] PORT_CMD = 0x1 [8125] failing IORB: 08a8:cee0 [8125] ahci_stop_port 0.1 [8125] ahci_start_port 0.1 [8125] ahci_start_port: PORT_SCR_STAT = 0x113 [8125] ahci_start_port: PORT_SCR_ERR = 0x0 [8125] atapi_req_sense [8125] ATA command for 0.1.0, slot 0: [8125] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [8125] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8125] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [8125] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [8125] restart_ctxhook() completed [8125] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [8125] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [8125] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [8125] IORB 08a8:cee0 removed (queue = 0610:5b74) [8125] IORB 08a8:cee0 complete (status = 0x000b, error = 0x0102) [8345] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [8345] ahci_execute_cdb(0.1.0): 08a8:0f62 00 00 00 00 00 00 ...... [8345] ATA command for 0.1.0, slot 1: [8345] cmd_hdr: 0628:7820 65 00 00 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [8345] ata_cmd: 1530:4be4 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8345] atapi_cmd: 1530:4c62 00 00 00 00 00 00 00 00-00 00 00 00 ............ [8345] issuing command on slot 1 [8347] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [8347] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002 [8347] IORB 08a8:0ede removed (queue = 0610:5b74) [8347] IORB 08a8:0ede complete (status = 0x0001, error = 0x0000) [8347] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [8347] ahci_execute_cdb(0.1.0): 08a8:0f62 15 10 00 00 0c 00 ...... [8347] ATA command for 0.1.0, slot 2: [8347] cmd_hdr: 0628:7840 65 00 01 00 00 00 00 00-00 b4 ef 00 00 00 00 00 e............... [8347] ata_cmd: 1530:4be0 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8347] atapi_cmd: 1530:4c5e 15 10 00 00 0c 00 00 00-00 00 00 00 ............ [8347] sg_list: 0628:8480 72 5f eb 00 00 00 00 00-00 00 00 00 0b 00 00 00 r_.............. [8347] issuing command on slot 2 [8347] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [8347] port #1 interrupt error status: 0x40000001; restarting port [8347] restart_ctxhook() started [8347] port 1, TF_DATA: 0x5451 [8347] PORT_CMD = 0x2 [8347] failing IORB: 08a8:0ede [8347] ahci_stop_port 0.1 [8347] ahci_start_port 0.1 [8347] ahci_start_port: PORT_SCR_STAT = 0x113 [8347] ahci_start_port: PORT_SCR_ERR = 0x0 [8347] atapi_req_sense [8347] ATA command for 0.1.0, slot 0: [8347] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [8347] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8347] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [8347] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [8347] restart_ctxhook() completed [8347] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [8347] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [8347] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [8347] IORB 08a8:0ede removed (queue = 0610:5b74) [8347] IORB 08a8:0ede complete (status = 0x000b, error = 0x0102) [8347] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [8347] ahci_execute_cdb(0.1.0): 08a8:0f62 15 10 00 00 18 00 ...... [8347] ATA command for 0.1.0, slot 1: [8347] cmd_hdr: 0628:7820 65 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 e............... [8347] ata_cmd: 1530:4be0 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8347] atapi_cmd: 1530:4c5e 15 10 00 00 18 00 00 00-00 00 00 00 ............ [8347] sg_list: 0628:8100 72 5f eb 00 00 00 00 00-00 00 00 00 17 00 00 00 r_.............. [8347] issuing command on slot 1 [8349] port interrupt for adapter 0 port 1 stat 40000001 stack frame 15e8:ff9e [8349] port #1 interrupt error status: 0x40000001; restarting port [8349] restart_ctxhook() started [8349] port 1, TF_DATA: 0x5451 [8349] PORT_CMD = 0x1 [8349] failing IORB: 08a8:0ede [8349] ahci_stop_port 0.1 [8349] ahci_start_port 0.1 [8349] ahci_start_port: PORT_SCR_STAT = 0x113 [8349] ahci_start_port: PORT_SCR_ERR = 0x0 [8349] atapi_req_sense [8349] ATA command for 0.1.0, slot 0: [8349] cmd_hdr: 0628:7800 25 00 01 00 00 00 00 00-00 ad ef 00 00 00 00 00 %............... [8349] ata_cmd: 1530:4e5a 01 00 00 00 00 00 00 00-00 00 a0 00 ............ [8349] atapi_cmd: 1530:4ed0 03 00 00 00 60 00 00 00-00 00 00 00 ....`....... [8349] sg_list: 0628:7d80 98 1e f8 00 00 00 00 00-00 00 00 00 5f 00 00 00 ............_... [8349] restart_ctxhook() completed [8349] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [8349] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000001 [8349] sense buffer: 0610:2e98 70 00 05 00 00 00 00 0a-00 00 00 00 20 00 00 00 p........... ... 0610:2ea8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2eb8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ec8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ed8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0610:2ee8 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ [8349] IORB 08a8:0ede removed (queue = 0610:5b74) [8349] IORB 08a8:0ede complete (status = 0x000b, error = 0x0102) [8349] IORB 08a8:0ede queued (cmd = 8/2, queue = 0610:5b74 [port], timeout = 0) [8349] ahci_execute_cdb(0.1.0): 08a8:0f62 46 02 00 00 00 00 00 00-0c 00 F......... [8349] ATA command for 0.1.0, slot 1: [8349] cmd_hdr: 0628:7820 25 00 01 00 00 00 00 00-80 b0 ef 00 00 00 00 00 %............... [8349] ata_cmd: 1530:4b96 05 00 00 00 00 00 00 00-00 00 a0 00 ............ [8349] atapi_cmd: 1530:4c14 46 02 00 00 00 00 00 00-0c 00 00 00 F........... [8349] sg_list: 0628:8100 72 5f eb 00 00 00 00 00-00 00 00 00 0b 00 00 00 r_.............. [8349] issuing command on slot 1 [8351] port interrupt for adapter 0 port 1 stat 1 stack frame 15e8:ff9e [8351] [reg_cmds]: active_cmds = 0x00000000, done_mask = 0x00000002 [8351] IORB 08a8:0ede removed (queue = 0610:5b74) [8351] IORB 08a8: