[1318] BAR #0: type = I/O, addr = 0x00001c48, size = 8
[1320] BAR #1: type = I/O, addr = 0x0000183c, size = 4
[1322] BAR #2: type = I/O, addr = 0x00001c40, size = 8
[1324] BAR #3: type = I/O, addr = 0x00001838, size = 4
[1326] BAR #4: type = I/O, addr = 0x00001c20, size = 32
[1328] BAR #5: type = MEM, addr = 0xfc226000, size = 2048
[1576] calibrating delay loop... [2656] done (loops per ms = 215300)
[2658] Registered kernel exit routine for INT13 mode
[2716] IORB 0868:8f3e queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0)
[2718] AHCI global controller registers:
[2720]  00: ef20ffa3[2720]  -[2722]  64bit[2722]  ncq[2724]  sntf[2724]  sss[2726]  alpm[2726]  led[2728]  clo[2728]  pio_multi[2730]  ssc[2732]  part[2732]  ccc[2734]  sxs[2734]  cmd_slots:32[2736]  ports:4[2738] 
[2738]  01: 00000000[2740] 
[2740]  02: 00000000[2742] 
[2744]  03: 00000003[2746] 
[2746]  04: 00010200[2748]  -[2748] 
[2750]  05: 00010130[2751] 
[2751]  06: 00000000[2753] 
[2753]  07: 00000000[2755] 
[2757]  08: 00000000[2757] 
[2759]  09: 00000000[2761] 
[2761] scanning ports on adapter #0
[2763] resetting port 0.0
[2765] command engine status:
[2767]  PORT_SCR_ACT   = 0x0
[2769]  PORT_CMD_ISSUE = 0x0
[2771] link/device status:
[2773]  PORT_SCR_STAT  = 0x0
[2775]  PORT_SCR_CTL   = 0x0
[2777]  PORT_SCR_ERR   = 0x50000
[2779]  PORT_TFDATA    = 0x7f
[2781] interrupt status:
[2783]  PORT_IRQ_STAT  = 0x400000
[2785]  PORT_IRQ_MASK  = 0x0
[2787]  HOST_IRQ_STAT  = 0x0
[2789] setting link speed and power management options
[2791] issuing COMRESET on port
[7896] no device present after resetting port #0 (PORT_SCR_STAT = 0x1)
[7898] resetting port 0.1
[7900] command engine status:
[7902]  PORT_SCR_ACT   = 0x0
[7904]  PORT_CMD_ISSUE = 0x0
[7906] link/device status:
[7908]  PORT_SCR_STAT  = 0x1
[7910]  PORT_SCR_CTL   = 0x0
[7912]  PORT_SCR_ERR   = 0x4010000
[7914]  PORT_TFDATA    = 0x80
[7916] interrupt status:
[7917]  PORT_IRQ_STAT  = 0x400040
[7919]  PORT_IRQ_MASK  = 0x0
[7921]  HOST_IRQ_STAT  = 0x0
[7923] setting link speed and power management options
[7925] issuing COMRESET on port
[13031] no device present after resetting port #1 (PORT_SCR_STAT = 0x1)
[13033] restoring AHCI BIOS configuration
[13054] IORB 0868:8f3e removed (queue = 07d0:c8c4)
[13056] IORB 0868:8f3e complete (status = 0x0001, error = 0x0000)
[15048] IORB 0868:03d0 queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0)
[15050] IORB 0868:03d0 removed (queue = 07d0:c8c4)
[15052] IORB 0868:03d0 complete (status = 0x0001, error = 0x0000)
[15054] IORB 0868:03d0 queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0)
[15056] IORB 0868:03d0 removed (queue = 07d0:c8c4)
[15058] IORB 0868:03d0 complete (status = 0x0001, error = 0x0000)
[15105] IORB 0890:c56c queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0)
[15107] IORB 0890:c56c removed (queue = 07d0:c8c4)
[15109] IORB 0890:c56c complete (status = 0x0001, error = 0x0000)
[15175] IORB 0968:47da queued (cmd = 1/1, queue = 07d0:c8c4 [driver], timeout = 0)
[15177] IORB 0968:47da removed (queue = 07d0:c8c4)
[15179] IORB 0968:47da complete (status = 0x0001, error = 0x0000)
[15181] IORB 0140:0d11 queued (cmd = 1/2, queue = 07d0:c8c4 [driver], timeout = 0)
[15183] leaving initialization mode
[15185] completing initialization of adapter #0
[15187] registering interrupt #16
[15189] IORB 0140:0d11 removed (queue = 07d0:c8c4)
[15191] IORB 0140:0d11 complete (status = 0x0001, error = 0x0000)
Processors Initialized: 2
Integrated ACPI Support Driver for eComStation v 3.21.03
Copyright (c) 2005-2012 Mensys BV
OS2AHCI driver version 1.25
This driver is licensed for use only in conjunction with eComStation.
OS/2 is unable to operate your hard disk or diskette drive.
The system is stopped.  Correct the preceding error and
restart the system.