Custom Query (34 matches)
Results (25 - 27 of 34)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #24 | fixed | Show list of hard drives | ||
| Description |
Can you add this feature to AHCI driver? Danis506 supports this feature: copy ibms506$ myhdd.txt {{ R1.8.9.9 /!BIOS
Controller:0 Port:01F0 IRQ:0E Status:OK BusMaster? Scatter/Gather?
Controller:1 Port:0170 IRQ:0F Status:OK BusMaster? Scatter/Gather?
}} |
|||
| #35 | worksforme | Slow boot and very slow DVD access when using os2ahci | ||
| Description |
I installed the v1.31 ahci package and rebooted. After several attempts at booting - a good clue there is a problem somewhere - I finally got to a working Desktop. I did notice with all the above (re)boots that booting took noticably longer than when not using the os2ahci.add driver - over a minute longer. I have read that AHCI is faster for drive access than IDE. That does not seem to apply here, if anything drive access is slower. I also see a problem with accessing my SATA DVD Burner. Having loaded the disc and waited for the drive LED to stop flashing I clicked on the DVD Burner icon to open the drive window. The system "froze" for over 30 seconds - the Desktop was totally un-responsive, mouse pointer moved but nothing could be selected - and then the drive window opened to show the contents. If I Right Mouse Button on the drive it takes a very similar amount of time for the popup menu to appear - and the system is "frozen" while waiting. I have attached 2 logs:- BOOT_dadzone-20131009-ahci-1.31.log is the boot log to try and ascertain if there is a problem during boot. RUNTIME_dadzone-20131009-ahci-1.31.log is a runtime log to try and ascertain why it takes so long to access my SATA DVD Burner. |
|||
| #37 | worksforme | System hangs after installing AHCI 1.32 and PCIe SATA card | ||
| Description |
Tyan S2895 Thunder K8WE mainboard with 4 x nVidia SATA ports working. Installed a new PCIe 4-port SATA controller for a 2 TiB Seagate drive. System hung during boot at the time it would be doing the chkdsk on the new drive. OS2AHCI.ADD added to config.sys in front of DANIS506.ADD. Long story short, I swapped the new HD to a mainboard SATA port with a Plextor DVDRW on the new controller. Still hung, this time on OS2CDROM.DMD. I remmed that out, and it booted OK. TESTLOG was run, hopefully with some good info. |
|||
