Custom Query (34 matches)

Hardware: Asus M5A88-V EVO + AMD quad-core CPU 2 x 500GB SATA drives connected to motherboard ports 2 x SCSI hard disks and one SCSI tape drive attached to LSILogic PCI card

This all works with OS2AHCI ver. 1.25, but with ver. 1.28 or 1.29 there is intermittent disk activity while the eCS splash screen is displayed, then the hd activity LED shows "solid" for quite a while, then nothing: the machine will not continue booting.

Using AHCI 1.22 on eCS 2.1. I have a 300GB SATA II hard drive. When I try to long format it JFS it gets to about 74% complete, then a loud 3 tone tune is played over and over on the motherboard speaker and the computer is hung. If I do this in IDE mode, the format completes with no trouble.

In newsgroups I have seen other people report this same problem.

version 1.30

I added the /g:8086:27c0 to get the driver to recognize the controller.

When it tries to load against the controller, it gives me this error on boot:

Found AHCI device Intel Generic (0:31:2 8086:27c0) class:0x01018f OS2AHCI: couldn't determine MMIO base address No adapter found OS2AHCI driver *not* installed

I suppose that the 0:31:2 could have been 0:31.2. I could have copied it down wrong.

I have the type ibms506$ output as well as a log from a d:2. I'd attach them now I if could figure out how to do that. I'll work on getting them added to this ticket.