Custom Query (34 matches)
Results (1 - 3 of 34)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #19 | fixed | Need /i to work for only specific ports | ||
| Description |
As far as I can guess, my disks are all on 1 adapter. I need to 'ignore' 2 of those, as they run in BIOS (software) RAID mode, which eCS doesn't understand. Please make /i work for specific ports too. |
|||
| #12 | fixed | cannot add a new vendor id | ||
| Description |
I tried to manually enable my intel N10/ICH7 controller, but BASEDEV=os2ahci.add /g:8086:27c0 failed with missing colon (:) afer /: error at boot. This controller is supposed to be also AHCI, but the server bios does not have an entry to enable it, so only sata currently works. this is a Dell poweredge SC440 server. |
|||
| #37 | worksforme | System hangs after installing AHCI 1.32 and PCIe SATA card | ||
| Description |
Tyan S2895 Thunder K8WE mainboard with 4 x nVidia SATA ports working. Installed a new PCIe 4-port SATA controller for a 2 TiB Seagate drive. System hung during boot at the time it would be doing the chkdsk on the new drive. OS2AHCI.ADD added to config.sys in front of DANIS506.ADD. Long story short, I swapped the new HD to a mainboard SATA port with a Plextor DVDRW on the new controller. Still hung, this time on OS2CDROM.DMD. I remmed that out, and it booted OK. TESTLOG was run, hopefully with some good info. |
|||
