1 | BldLevel: @#D Azarewicz:1.32#@##1## 10 Nov 2013 07:58:57 DAZAR1 ::::::@@AHCI Driver (c) 2013 D Azarewicz |
---|
2 | CmdLine: OS2AHCI.ADD /d:2 /c:1 /b:115200 |
---|
3 | [468] scanning PCI bus... |
---|
4 | [898] Adapter 0 PCI=129:0:0 ID=1b4b:9230 |
---|
5 | [900] BAR #0: type = I/O, addr = 0x00005030, size = 8 |
---|
6 | [902] BAR #1: type = I/O, addr = 0x00005024, size = 4 |
---|
7 | [904] BAR #2: type = I/O, addr = 0x00005028, size = 8 |
---|
8 | [906] BAR #3: type = I/O, addr = 0x00005020, size = 4 |
---|
9 | [908] BAR #4: type = I/O, addr = 0x00005000, size = 32 |
---|
10 | [910] BAR #5: type = MEM, addr = 0xd0500000, size = 2048 |
---|
11 | [916] Registered kernel exit routine for INT13 mode |
---|
12 | [933] IORB 07a8:8f42 queued (cmd = 1/1, queue = 0748:5912 [driver], timeout = 0) |
---|
13 | [935] ahci_save_bios_config: BIOS AHCI mode is 0 |
---|
14 | [937] AHCI global registers for adapter 0 129:0:0 irq=5 addr=0xd0500000 |
---|
15 | 00: c0309f07 - 64bit ncq pio_multi cmd_slots:32 ports:8 |
---|
16 | 04: 80000002 - ahci_enabled irq_enabled |
---|
17 | 08: 00000000 |
---|
18 | 0c: 000000ff |
---|
19 | 10: 00010200 |
---|
20 | 14: 00000040 |
---|
21 | 18: 00000000 |
---|
22 | 1c: 00000000 |
---|
23 | 20: 00000000 |
---|
24 | 24: 00000000 - |
---|
25 | [958] ahci_scan_ports: scanning ports on adapter 0 |
---|
26 | [960] ahci_scan_ports: Wait till not busy on port 0 |
---|
27 | [962] ahci_reset_port: resetting port 0.0 |
---|
28 | [964] AHCI port 0 registers: |
---|
29 | PORT_CMD = 0x8007 |
---|
30 | command engine status: |
---|
31 | PORT_SCR_ACT = 0x0 |
---|
32 | PORT_CMD_ISSUE = 0x0 |
---|
33 | link/device status: |
---|
34 | PORT_SCR_STAT = 0x133 |
---|
35 | PORT_SCR_CTL = 0x0 |
---|
36 | PORT_SCR_ERR = 0x0 |
---|
37 | PORT_TFDATA = 0x50 |
---|
38 | interrupt status: |
---|
39 | PORT_IRQ_STAT = 0x0 |
---|
40 | PORT_IRQ_MASK = 0x0 |
---|
41 | HOST_IRQ_STAT = 0x0 |
---|
42 | [992] ahci_stop_port 0.0 |
---|
43 | [1000] ahci_reset_port: setting link speed and power management options |
---|
44 | [1001] ahci_reset_port: issuing COMRESET on port 0 |
---|
45 | [1005] Wait for communication... |
---|
46 | [1007] ahci_reset_port: starting port 0 again |
---|
47 | [1009] ahci_start_port 0.0 |
---|
48 | [1011] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
49 | [1013] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
50 | [1218] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
51 | [1220] ahci_scan_ports: port 0 seems to be attached to a device; probing... |
---|
52 | [1222] ATA command for 0.0.0, slot 0: |
---|
53 | [1224] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
54 | [1232] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
55 | [1240] sg_list: 0768:0580 f2 0d f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
56 | [1248] executing polled cmd...[1281] success |
---|
57 | [1281] ATA_IDENTIFY results: |
---|
58 | 0748:2df2 5a 0c ff 3f 37 c8 10 00-00 00 00 00 3f 00 00 00 Z..?7.......?... |
---|
59 | 0748:2e02 00 00 00 00 20 20 20 20-20 20 20 20 20 20 20 20 .... |
---|
60 | 0748:2e12 33 57 34 54 5a 48 30 54-00 00 00 80 04 00 43 4b 3W4TZH0T......CK |
---|
61 | 0748:2e22 38 34 20 20 20 20 54 53-30 35 44 30 30 4d 32 30 84 TS05D00M20 |
---|
62 | 0748:2e32 31 2d 44 42 34 31 20 32-20 20 20 20 20 20 20 20 1-DB41 2 |
---|
63 | 0748:2e42 20 20 20 20 20 20 20 20-20 20 20 20 20 20 10 80 .. |
---|
64 | 0748:2e52 00 00 00 2f 00 40 00 02-00 02 07 00 ff 3f 10 00 .../.@.......?.. |
---|
65 | 0748:2e62 3f 00 10 fc fb 00 10 00-ff ff ff 0f 00 00 07 00 ?............... |
---|
66 | 0748:2e72 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
67 | 0748:2e82 00 00 00 00 00 00 1f 00-0e 85 06 00 48 00 40 00 ............H.@. |
---|
68 | 0748:2e92 f0 01 29 00 6b 34 61 7f-63 41 69 34 41 be 63 41 ..).k4acAi4A.cA |
---|
69 | 0748:2ea2 7f 40 27 00 27 00 00 00-fe ff 00 00 d0 d0 00 00 @'.'........... |
---|
70 | 0748:2eb2 00 00 00 00 00 00 00 00-30 60 38 3a 00 00 00 00 ........0`8:.... |
---|
71 | 0748:2ec2 00 00 00 00 03 60 00 00-00 50 00 c5 2a 73 1d 49 .....`...P..*s.I |
---|
72 | 0748:2ed2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 1e 40 ...............@ |
---|
73 | 0748:2ee2 1c 40 00 00 00 00 00 00-00 00 00 00 00 00 00 00 .@.............. |
---|
74 | 0748:2ef2 21 00 30 60 38 3a 30 60-38 3a 20 20 02 00 40 01 !.0`8:0`8: ..@. |
---|
75 | 0748:2f02 00 01 00 50 06 3c 0a 3c-00 00 3c 00 00 00 08 00 ...P.<.<..<..... |
---|
76 | 0748:2f12 00 00 00 00 4f 00 80 02-00 00 00 00 08 00 00 00 ....O........... |
---|
77 | 0748:2f22 00 00 00 00 00 00 00 00-00 00 00 00 00 3f e0 99 .............?.. |
---|
78 | 0748:2f32 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
79 | 0748:2f42 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
80 | 0748:2f52 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
81 | 0748:2f62 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
82 | 0748:2f72 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
83 | 0748:2f82 00 00 00 00 00 00 00 00-00 00 00 00 3f 30 00 00 ............?0.. |
---|
84 | 0748:2f92 00 00 00 40 00 00 00 00-00 00 00 00 00 00 00 00 ...@............ |
---|
85 | 0748:2fa2 00 00 20 1c 00 00 00 00-00 00 00 00 20 10 00 00 .. ......... ... |
---|
86 | 0748:2fb2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
87 | 0748:2fc2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
88 | 0748:2fd2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
89 | 0748:2fe2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 a5 46 ...............F |
---|
90 | [1501] found device 0.0.0: removable = 0, dev_type = 0, atapi = 0, ncq_max = 1 |
---|
91 | [1503] ahci_stop_port 0.0 |
---|
92 | [1562] ahci_scan_ports: Wait till not busy on port 1 |
---|
93 | [1564] ahci_reset_port: resetting port 0.1 |
---|
94 | [1566] AHCI port 1 registers: |
---|
95 | PORT_CMD = 0x8007 |
---|
96 | command engine status: |
---|
97 | PORT_SCR_ACT = 0x0 |
---|
98 | PORT_CMD_ISSUE = 0x0 |
---|
99 | link/device status: |
---|
100 | PORT_SCR_STAT = 0x0 |
---|
101 | PORT_SCR_CTL = 0x0 |
---|
102 | PORT_SCR_ERR = 0x0 |
---|
103 | PORT_TFDATA = 0x7f |
---|
104 | interrupt status: |
---|
105 | PORT_IRQ_STAT = 0x0 |
---|
106 | PORT_IRQ_MASK = 0x7800001b |
---|
107 | HOST_IRQ_STAT = 0x0 |
---|
108 | [1593] ahci_stop_port 0.1 |
---|
109 | [1625] ahci_reset_port: setting link speed and power management options |
---|
110 | [1626] ahci_reset_port: issuing COMRESET on port 1 |
---|
111 | [1630] Wait for communication... |
---|
112 | [2156] no device present after resetting port #1 (PORT_SCR_STAT = 0x0) |
---|
113 | [2158] ahci_stop_port 0.1 |
---|
114 | [2160] ahci_scan_ports: Wait till not busy on port 2 |
---|
115 | [2162] ahci_reset_port: resetting port 0.2 |
---|
116 | [2164] AHCI port 2 registers: |
---|
117 | PORT_CMD = 0x8007 |
---|
118 | command engine status: |
---|
119 | PORT_SCR_ACT = 0x0 |
---|
120 | PORT_CMD_ISSUE = 0x0 |
---|
121 | link/device status: |
---|
122 | PORT_SCR_STAT = 0x0 |
---|
123 | PORT_SCR_CTL = 0x0 |
---|
124 | PORT_SCR_ERR = 0x0 |
---|
125 | PORT_TFDATA = 0x7f |
---|
126 | interrupt status: |
---|
127 | PORT_IRQ_STAT = 0x0 |
---|
128 | PORT_IRQ_MASK = 0x7800001b |
---|
129 | HOST_IRQ_STAT = 0x0 |
---|
130 | [2191] ahci_stop_port 0.2 |
---|
131 | [2218] ahci_reset_port: setting link speed and power management options |
---|
132 | [2220] ahci_reset_port: issuing COMRESET on port 2 |
---|
133 | [2224] Wait for communication... |
---|
134 | [2750] no device present after resetting port #2 (PORT_SCR_STAT = 0x0) |
---|
135 | [2751] ahci_stop_port 0.2 |
---|
136 | [2753] ahci_scan_ports: Wait till not busy on port 3 |
---|
137 | [2755] ahci_reset_port: resetting port 0.3 |
---|
138 | [2757] AHCI port 3 registers: |
---|
139 | PORT_CMD = 0x8007 |
---|
140 | command engine status: |
---|
141 | PORT_SCR_ACT = 0x0 |
---|
142 | PORT_CMD_ISSUE = 0x0 |
---|
143 | link/device status: |
---|
144 | PORT_SCR_STAT = 0x0 |
---|
145 | PORT_SCR_CTL = 0x0 |
---|
146 | PORT_SCR_ERR = 0x0 |
---|
147 | PORT_TFDATA = 0x7f |
---|
148 | interrupt status: |
---|
149 | PORT_IRQ_STAT = 0x0 |
---|
150 | PORT_IRQ_MASK = 0x7800001b |
---|
151 | HOST_IRQ_STAT = 0x0 |
---|
152 | [2785] ahci_stop_port 0.3 |
---|
153 | [2812] ahci_reset_port: setting link speed and power management options |
---|
154 | [2814] ahci_reset_port: issuing COMRESET on port 3 |
---|
155 | [2818] Wait for communication... |
---|
156 | [3343] no device present after resetting port #3 (PORT_SCR_STAT = 0x0) |
---|
157 | [3345] ahci_stop_port 0.3 |
---|
158 | [3347] ahci_scan_ports: Wait till not busy on port 4 |
---|
159 | [3349] ahci_reset_port: resetting port 0.4 |
---|
160 | [3351] AHCI port 4 registers: |
---|
161 | PORT_CMD = 0x8007 |
---|
162 | command engine status: |
---|
163 | PORT_SCR_ACT = 0x0 |
---|
164 | PORT_CMD_ISSUE = 0x0 |
---|
165 | link/device status: |
---|
166 | PORT_SCR_STAT = 0x0 |
---|
167 | PORT_SCR_CTL = 0x0 |
---|
168 | PORT_SCR_ERR = 0x0 |
---|
169 | PORT_TFDATA = 0x7f |
---|
170 | interrupt status: |
---|
171 | PORT_IRQ_STAT = 0x0 |
---|
172 | PORT_IRQ_MASK = 0x7800001b |
---|
173 | HOST_IRQ_STAT = 0x0 |
---|
174 | [3378] ahci_stop_port 0.4 |
---|
175 | [3406] ahci_reset_port: setting link speed and power management options |
---|
176 | [3408] ahci_reset_port: issuing COMRESET on port 4 |
---|
177 | [3412] Wait for communication... |
---|
178 | [3937] no device present after resetting port #4 (PORT_SCR_STAT = 0x0) |
---|
179 | [3939] ahci_stop_port 0.4 |
---|
180 | [3941] ahci_scan_ports: Wait till not busy on port 5 |
---|
181 | [3943] ahci_reset_port: resetting port 0.5 |
---|
182 | [3945] AHCI port 5 registers: |
---|
183 | PORT_CMD = 0x8007 |
---|
184 | command engine status: |
---|
185 | PORT_SCR_ACT = 0x0 |
---|
186 | PORT_CMD_ISSUE = 0x0 |
---|
187 | link/device status: |
---|
188 | PORT_SCR_STAT = 0x0 |
---|
189 | PORT_SCR_CTL = 0x0 |
---|
190 | PORT_SCR_ERR = 0x0 |
---|
191 | PORT_TFDATA = 0x7f |
---|
192 | interrupt status: |
---|
193 | PORT_IRQ_STAT = 0x0 |
---|
194 | PORT_IRQ_MASK = 0x7800001b |
---|
195 | HOST_IRQ_STAT = 0x0 |
---|
196 | [3972] ahci_stop_port 0.5 |
---|
197 | [4000] ahci_reset_port: setting link speed and power management options |
---|
198 | [4001] ahci_reset_port: issuing COMRESET on port 5 |
---|
199 | [4005] Wait for communication... |
---|
200 | [4531] no device present after resetting port #5 (PORT_SCR_STAT = 0x0) |
---|
201 | [4533] ahci_stop_port 0.5 |
---|
202 | [4535] ahci_scan_ports: Wait till not busy on port 6 |
---|
203 | [4537] ahci_reset_port: resetting port 0.6 |
---|
204 | [4539] AHCI port 6 registers: |
---|
205 | PORT_CMD = 0x8007 |
---|
206 | command engine status: |
---|
207 | PORT_SCR_ACT = 0x0 |
---|
208 | PORT_CMD_ISSUE = 0x0 |
---|
209 | link/device status: |
---|
210 | PORT_SCR_STAT = 0x0 |
---|
211 | PORT_SCR_CTL = 0x0 |
---|
212 | PORT_SCR_ERR = 0x0 |
---|
213 | PORT_TFDATA = 0x7f |
---|
214 | interrupt status: |
---|
215 | PORT_IRQ_STAT = 0x0 |
---|
216 | PORT_IRQ_MASK = 0x7800001b |
---|
217 | HOST_IRQ_STAT = 0x0 |
---|
218 | [4566] ahci_stop_port 0.6 |
---|
219 | [4593] ahci_reset_port: setting link speed and power management options |
---|
220 | [4595] ahci_reset_port: issuing COMRESET on port 6 |
---|
221 | [4599] Wait for communication... |
---|
222 | [5125] no device present after resetting port #6 (PORT_SCR_STAT = 0x0) |
---|
223 | [5126] ahci_stop_port 0.6 |
---|
224 | [5128] ahci_scan_ports: Wait till not busy on port 7 |
---|
225 | [5130] ahci_reset_port: resetting port 0.7 |
---|
226 | [5132] AHCI port 7 registers: |
---|
227 | PORT_CMD = 0x8007 |
---|
228 | command engine status: |
---|
229 | PORT_SCR_ACT = 0x0 |
---|
230 | PORT_CMD_ISSUE = 0x0 |
---|
231 | link/device status: |
---|
232 | PORT_SCR_STAT = 0x113 |
---|
233 | PORT_SCR_CTL = 0x0 |
---|
234 | PORT_SCR_ERR = 0x0 |
---|
235 | PORT_TFDATA = 0x50 |
---|
236 | interrupt status: |
---|
237 | PORT_IRQ_STAT = 0x0 |
---|
238 | PORT_IRQ_MASK = 0x0 |
---|
239 | HOST_IRQ_STAT = 0x0 |
---|
240 | [5160] ahci_stop_port 0.7 |
---|
241 | [5187] ahci_reset_port: setting link speed and power management options |
---|
242 | [5189] ahci_reset_port: issuing COMRESET on port 7 |
---|
243 | [5193] Wait for communication... |
---|
244 | [5195] ahci_reset_port: starting port 7 again |
---|
245 | [5197] ahci_start_port 0.7 |
---|
246 | [5199] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
247 | [5201] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
248 | [5203] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
249 | [5205] ahci_scan_ports: port 7 seems to be attached to a device; probing... |
---|
250 | [5207] ATA command for 0.7.0, slot 0: |
---|
251 | [5208] cmd_hdr: 0780:7800 05 00 01 00 00 00 00 00-00 ed f2 00 00 00 00 00 ................ |
---|
252 | [5216] ata_cmd: 1530:4cd0 00 00 00 00 00 00 00 00-00 00 a1 00 ............ |
---|
253 | [5224] sg_list: 0780:7d80 f2 0d f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
254 | [5234] executing polled cmd...[5250] success |
---|
255 | [5250] ATA_IDENTIFY_PACKET results: |
---|
256 | 0748:2df2 40 83 00 00 00 00 00 00-00 00 00 00 00 00 00 00 @............... |
---|
257 | 0748:2e02 00 00 00 00 48 00 44 4b-32 50 31 32 31 35 57 36 ....H.DK2P1215W6 |
---|
258 | 0748:2e12 20 4c 20 20 20 20 20 20-53 34 80 00 00 00 2e 31 L S4.....1 |
---|
259 | 0748:2e22 39 30 20 20 20 20 41 4d-56 52 4c 45 20 4c 49 56 90 AMVRLE LIV |
---|
260 | 0748:2e32 54 52 41 55 4c 4c 20 20-20 20 20 20 20 20 20 20 TRAULL |
---|
261 | 0748:2e42 20 20 20 20 20 20 20 20-20 20 20 20 20 20 00 00 .. |
---|
262 | 0748:2e52 00 00 00 0f 01 40 00 02-00 02 06 00 00 00 00 00 .....@.......... |
---|
263 | 0748:2e62 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
264 | 0748:2e72 03 00 78 00 78 00 78 00-78 00 00 00 00 00 00 00 ..x.x.x.x....... |
---|
265 | 0748:2e82 00 00 00 00 00 00 00 00-02 06 00 00 40 00 40 00 ............@.@. |
---|
266 | 0748:2e92 fc 00 21 00 18 02 00 40-00 40 18 02 00 00 00 40 ..!....@.@.....@ |
---|
267 | 0748:2ea2 1f 10 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
268 | 0748:2eb2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
269 | 0748:2ec2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
270 | 0748:2ed2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
271 | 0748:2ee2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
272 | 0748:2ef2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
273 | 0748:2f02 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
274 | 0748:2f12 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
275 | 0748:2f22 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
276 | 0748:2f32 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
277 | 0748:2f42 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
278 | 0748:2f52 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
279 | 0748:2f62 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
280 | 0748:2f72 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
281 | 0748:2f82 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
282 | 0748:2f92 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
283 | 0748:2fa2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
284 | 0748:2fb2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
285 | 0748:2fc2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
286 | 0748:2fd2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
287 | 0748:2fe2 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ |
---|
288 | [5470] found device 0.7.0: removable = 0, dev_type = 3, atapi = 1, ncq_max = 1 |
---|
289 | [5472] ahci_stop_port 0.7 |
---|
290 | [5531] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
291 | [5533] IORB 07a8:8f42 removed (queue = 0748:5912) |
---|
292 | [5535] IORB 07a8:8f42 complete (status = 0x0001, error = 0x0000) |
---|
293 | [7681] IORB 0808:03d0 queued (cmd = 1/1, queue = 0748:5912 [driver], timeout = 0) |
---|
294 | [7683] IORB 0808:03d0 removed (queue = 0748:5912) |
---|
295 | [7685] IORB 0808:03d0 complete (status = 0x0001, error = 0x0000) |
---|
296 | [7687] IORB 0808:03d0 queued (cmd = 1/1, queue = 0748:5912 [driver], timeout = 0) |
---|
297 | [7689] IORB 0808:03d0 removed (queue = 0748:5912) |
---|
298 | [7691] IORB 0808:03d0 complete (status = 0x0001, error = 0x0000) |
---|
299 | [7908] IORB 0828:c56c queued (cmd = 1/1, queue = 0748:5912 [driver], timeout = 0) |
---|
300 | [7910] IORB 0828:c56c removed (queue = 0748:5912) |
---|
301 | [7912] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
302 | [7914] IORB 0828:c56c queued (cmd = 2/1, queue = 0748:5a30 [port], timeout = 0) |
---|
303 | [7916] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
304 | [7917] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
305 | [7919] IORB 0828:c56c queued (cmd = 3/3, queue = 0748:5a30 [port], timeout = 0) |
---|
306 | [7921] ahci_get_geometry(0.0.0) |
---|
307 | [7923] ahci_reset_port: resetting port 0.0 |
---|
308 | [7925] AHCI port 0 registers: |
---|
309 | PORT_CMD = 0x8007 |
---|
310 | command engine status: |
---|
311 | PORT_SCR_ACT = 0x0 |
---|
312 | PORT_CMD_ISSUE = 0x0 |
---|
313 | link/device status: |
---|
314 | PORT_SCR_STAT = 0x133 |
---|
315 | PORT_SCR_CTL = 0x0 |
---|
316 | PORT_SCR_ERR = 0x0 |
---|
317 | PORT_TFDATA = 0x50 |
---|
318 | interrupt status: |
---|
319 | PORT_IRQ_STAT = 0x0 |
---|
320 | PORT_IRQ_MASK = 0x0 |
---|
321 | HOST_IRQ_STAT = 0x0 |
---|
322 | [7953] ahci_stop_port 0.0 |
---|
323 | [7968] ahci_reset_port: setting link speed and power management options |
---|
324 | [7970] ahci_reset_port: issuing COMRESET on port 0 |
---|
325 | [7974] Wait for communication... |
---|
326 | [7976] ahci_reset_port: starting port 0 again |
---|
327 | [7978] ahci_start_port 0.0 |
---|
328 | [7980] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
329 | [7982] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
330 | [8187] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
331 | [8189] ATA command for 0.0.0, slot 0: |
---|
332 | [8191] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
333 | [8199] ata_cmd: 1530:4ccc 00 00 00 00 00 00 00 00-00 00 ec 00 ............ |
---|
334 | [8208] sg_list: 0768:0580 72 0e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 r............... |
---|
335 | [8216] executing polled cmd on slot 0...[8250] Physical geometry: 16383 cylinders, 16 heads, 63 sectors per track (476940MB) (BIOS) |
---|
336 | [8251] Logical geometry: 60801 cylinders, 255 heads, 63 sectors per track (476937MB) (BIOS) |
---|
337 | [8253] is_lvm_geometry (0.0.0) |
---|
338 | [8255] ATA command for 0.0.0, slot 0: |
---|
339 | [8257] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
340 | [8265] ata_cmd: 1530:4c86 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
341 | [8273] sg_list: 0768:0580 72 0e f8 00 00 00 00 00-00 00 00 00 ff 01 00 00 r............... |
---|
342 | [8283] executing polled cmd...[8312] success |
---|
343 | [8312] DLA sector 62: |
---|
344 | 0748:2e72 02 52 4d 42 50 4d 46 44-cf 6d e3 80 2f 8c 9d 64 .RMBPMFD.m../..d |
---|
345 | 0748:2e82 2f 8c 9d 64 00 00 00 00-81 ed 00 00 ff 00 00 00 /..d............ |
---|
346 | 0748:2e92 3f 00 00 00 5b 20 44 31-20 5d 00 00 00 00 00 00 ?...[ D1 ]...... |
---|
347 | 0748:2ea2 00 00 00 00 00 00 00 00-00 00 00 00 ............ |
---|
348 | [8341] is_lvm_geometry found at sector 62 |
---|
349 | [8343] Reported geometry: 60801 cylinders, 255 heads, 63 sectors per track (476937MB) (LVM) |
---|
350 | [8345] |
---|
351 | [8345] ahci_stop_port 0.0 |
---|
352 | [8406] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
353 | [8408] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
354 | [8410] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
355 | [8412] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
356 | [8414] ahci_read(0.0.0, 0, 1) |
---|
357 | [8416] ahci_reset_port: resetting port 0.0 |
---|
358 | [8417] AHCI port 0 registers: |
---|
359 | PORT_CMD = 0x8007 |
---|
360 | command engine status: |
---|
361 | PORT_SCR_ACT = 0x0 |
---|
362 | PORT_CMD_ISSUE = 0x0 |
---|
363 | link/device status: |
---|
364 | PORT_SCR_STAT = 0x133 |
---|
365 | PORT_SCR_CTL = 0x0 |
---|
366 | PORT_SCR_ERR = 0x0 |
---|
367 | PORT_TFDATA = 0x50 |
---|
368 | interrupt status: |
---|
369 | PORT_IRQ_STAT = 0x0 |
---|
370 | PORT_IRQ_MASK = 0x0 |
---|
371 | HOST_IRQ_STAT = 0x0 |
---|
372 | [8445] ahci_stop_port 0.0 |
---|
373 | [8468] ahci_reset_port: setting link speed and power management options |
---|
374 | [8470] ahci_reset_port: issuing COMRESET on port 0 |
---|
375 | [8474] Wait for communication... |
---|
376 | [8476] ahci_reset_port: starting port 0 again |
---|
377 | [8478] ahci_start_port 0.0 |
---|
378 | [8480] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
379 | [8482] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
380 | [8687] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
381 | [8689] ATA command for 0.0.0, slot 0: |
---|
382 | [8691] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
383 | [8699] ata_cmd: 1530:4a28 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
384 | [8708] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
385 | [8716] executing polled cmd on slot 0...[8750] ata_read_pp(): blocks transferred = 1 |
---|
386 | [8751] |
---|
387 | [8753] ahci_stop_port 0.0 |
---|
388 | [8812] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
389 | [8814] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
390 | [8816] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
391 | [8818] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
392 | [8820] ahci_read(0.0.0, 62, 1) |
---|
393 | [8822] ahci_reset_port: resetting port 0.0 |
---|
394 | [8824] AHCI port 0 registers: |
---|
395 | PORT_CMD = 0x8007 |
---|
396 | command engine status: |
---|
397 | PORT_SCR_ACT = 0x0 |
---|
398 | PORT_CMD_ISSUE = 0x0 |
---|
399 | link/device status: |
---|
400 | PORT_SCR_STAT = 0x133 |
---|
401 | PORT_SCR_CTL = 0x0 |
---|
402 | PORT_SCR_ERR = 0x0 |
---|
403 | PORT_TFDATA = 0x50 |
---|
404 | interrupt status: |
---|
405 | PORT_IRQ_STAT = 0x0 |
---|
406 | PORT_IRQ_MASK = 0x0 |
---|
407 | HOST_IRQ_STAT = 0x0 |
---|
408 | [8851] ahci_stop_port 0.0 |
---|
409 | [8875] ahci_reset_port: setting link speed and power management options |
---|
410 | [8876] ahci_reset_port: issuing COMRESET on port 0 |
---|
411 | [8880] Wait for communication... |
---|
412 | [8882] ahci_reset_port: starting port 0 again |
---|
413 | [8884] ahci_start_port 0.0 |
---|
414 | [8886] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
415 | [8888] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
416 | [9093] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
417 | [9095] ATA command for 0.0.0, slot 0: |
---|
418 | [9097] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
419 | [9105] ata_cmd: 1530:47f2 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
420 | [9115] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
421 | [9123] executing polled cmd on slot 0...[9156] ata_read_pp(): blocks transferred = 1 |
---|
422 | [9158] |
---|
423 | [9160] ahci_stop_port 0.0 |
---|
424 | [9218] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
425 | [9220] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
426 | [9222] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
427 | [9230] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
428 | [9232] ahci_read(0.0.0, 62, 1) |
---|
429 | [9234] ahci_reset_port: resetting port 0.0 |
---|
430 | [9236] AHCI port 0 registers: |
---|
431 | PORT_CMD = 0x8007 |
---|
432 | command engine status: |
---|
433 | PORT_SCR_ACT = 0x0 |
---|
434 | PORT_CMD_ISSUE = 0x0 |
---|
435 | link/device status: |
---|
436 | PORT_SCR_STAT = 0x133 |
---|
437 | PORT_SCR_CTL = 0x0 |
---|
438 | PORT_SCR_ERR = 0x0 |
---|
439 | PORT_TFDATA = 0x50 |
---|
440 | interrupt status: |
---|
441 | PORT_IRQ_STAT = 0x0 |
---|
442 | PORT_IRQ_MASK = 0x0 |
---|
443 | HOST_IRQ_STAT = 0x0 |
---|
444 | [9263] ahci_stop_port 0.0 |
---|
445 | [9281] ahci_reset_port: setting link speed and power management options |
---|
446 | [9283] ahci_reset_port: issuing COMRESET on port 0 |
---|
447 | [9287] Wait for communication... |
---|
448 | [9289] ahci_reset_port: starting port 0 again |
---|
449 | [9291] ahci_start_port 0.0 |
---|
450 | [9292] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
451 | [9294] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
452 | [9500] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
453 | [9501] ATA command for 0.0.0, slot 0: |
---|
454 | [9503] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
455 | [9511] ata_cmd: 1530:4c26 00 00 01 00 3e 00 00 00-00 00 c8 40 ....>......@ |
---|
456 | [9521] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
457 | [9529] executing polled cmd on slot 0...[9562] ata_read_pp(): blocks transferred = 1 |
---|
458 | [9564] |
---|
459 | [9566] ahci_stop_port 0.0 |
---|
460 | [9625] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
461 | [9626] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
462 | [9628] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
463 | [9630] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
464 | [9632] ahci_read(0.0.0, 0, 1) |
---|
465 | [9634] ahci_reset_port: resetting port 0.0 |
---|
466 | [9636] AHCI port 0 registers: |
---|
467 | PORT_CMD = 0x8007 |
---|
468 | command engine status: |
---|
469 | PORT_SCR_ACT = 0x0 |
---|
470 | PORT_CMD_ISSUE = 0x0 |
---|
471 | link/device status: |
---|
472 | PORT_SCR_STAT = 0x133 |
---|
473 | PORT_SCR_CTL = 0x0 |
---|
474 | PORT_SCR_ERR = 0x0 |
---|
475 | PORT_TFDATA = 0x50 |
---|
476 | interrupt status: |
---|
477 | PORT_IRQ_STAT = 0x0 |
---|
478 | PORT_IRQ_MASK = 0x0 |
---|
479 | HOST_IRQ_STAT = 0x0 |
---|
480 | [9664] ahci_stop_port 0.0 |
---|
481 | [9687] ahci_reset_port: setting link speed and power management options |
---|
482 | [9689] ahci_reset_port: issuing COMRESET on port 0 |
---|
483 | [9693] Wait for communication... |
---|
484 | [9695] ahci_reset_port: starting port 0 again |
---|
485 | [9697] ahci_start_port 0.0 |
---|
486 | [9699] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
487 | [9701] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
488 | [9906] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
489 | [9908] ATA command for 0.0.0, slot 0: |
---|
490 | [9910] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
491 | [9917] ata_cmd: 1530:4c2c 00 00 01 00 00 00 00 00-00 00 c8 40 ...........@ |
---|
492 | [9927] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
493 | [9935] executing polled cmd on slot 0...[9968] ata_read_pp(): blocks transferred = 1 |
---|
494 | [9970] |
---|
495 | [9972] ahci_stop_port 0.0 |
---|
496 | [10031] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
497 | [10033] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
498 | [10035] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
499 | [10037] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
500 | [10039] ahci_read(0.0.0, 63, 1) |
---|
501 | [10041] ahci_reset_port: resetting port 0.0 |
---|
502 | [10042] AHCI port 0 registers: |
---|
503 | PORT_CMD = 0x8007 |
---|
504 | command engine status: |
---|
505 | PORT_SCR_ACT = 0x0 |
---|
506 | PORT_CMD_ISSUE = 0x0 |
---|
507 | link/device status: |
---|
508 | PORT_SCR_STAT = 0x133 |
---|
509 | PORT_SCR_CTL = 0x0 |
---|
510 | PORT_SCR_ERR = 0x0 |
---|
511 | PORT_TFDATA = 0x50 |
---|
512 | interrupt status: |
---|
513 | PORT_IRQ_STAT = 0x0 |
---|
514 | PORT_IRQ_MASK = 0x0 |
---|
515 | HOST_IRQ_STAT = 0x0 |
---|
516 | [10070] ahci_stop_port 0.0 |
---|
517 | [10093] ahci_reset_port: setting link speed and power management options |
---|
518 | [10095] ahci_reset_port: issuing COMRESET on port 0 |
---|
519 | [10099] Wait for communication... |
---|
520 | [10101] ahci_reset_port: starting port 0 again |
---|
521 | [10103] ahci_start_port 0.0 |
---|
522 | [10105] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
523 | [10107] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
524 | [10312] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
525 | [10314] ATA command for 0.0.0, slot 0: |
---|
526 | [10316] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
527 | [10326] ata_cmd: 1530:4c24 00 00 01 00 3f 00 00 00-00 00 c8 40 ....?......@ |
---|
528 | [10333] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
529 | [10341] executing polled cmd on slot 0...[10375] ata_read_pp(): blocks transferred = 1 |
---|
530 | [10376] |
---|
531 | [10376] ahci_stop_port 0.0 |
---|
532 | [10437] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
533 | [10439] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
534 | [10441] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
535 | [10443] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
536 | [10445] ahci_read(0.0.0, 204812747, 1) |
---|
537 | [10447] ahci_reset_port: resetting port 0.0 |
---|
538 | [10449] AHCI port 0 registers: |
---|
539 | PORT_CMD = 0x8007 |
---|
540 | command engine status: |
---|
541 | PORT_SCR_ACT = 0x0 |
---|
542 | PORT_CMD_ISSUE = 0x0 |
---|
543 | link/device status: |
---|
544 | PORT_SCR_STAT = 0x133 |
---|
545 | PORT_SCR_CTL = 0x0 |
---|
546 | PORT_SCR_ERR = 0x0 |
---|
547 | PORT_TFDATA = 0x50 |
---|
548 | interrupt status: |
---|
549 | PORT_IRQ_STAT = 0x0 |
---|
550 | PORT_IRQ_MASK = 0x0 |
---|
551 | HOST_IRQ_STAT = 0x0 |
---|
552 | [10474] ahci_stop_port 0.0 |
---|
553 | [10500] ahci_reset_port: setting link speed and power management options |
---|
554 | [10501] ahci_reset_port: issuing COMRESET on port 0 |
---|
555 | [10505] Wait for communication... |
---|
556 | [10507] ahci_reset_port: starting port 0 again |
---|
557 | [10509] ahci_start_port 0.0 |
---|
558 | [10511] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
559 | [10513] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
560 | [10718] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
561 | [10720] ATA command for 0.0.0, slot 0: |
---|
562 | [10722] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
563 | [10732] ata_cmd: 1530:4c04 00 00 01 00 cb 31 35 00-00 00 c8 4c .....15....L |
---|
564 | [10740] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
565 | [10748] executing polled cmd on slot 0...[10781] ata_read_pp(): blocks transferred = 1 |
---|
566 | [10783] |
---|
567 | [10783] ahci_stop_port 0.0 |
---|
568 | [10843] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
569 | [10845] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
570 | [10847] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
571 | [10849] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
572 | [10851] ahci_read(0.0.0, 204812685, 1) |
---|
573 | [10853] ahci_reset_port: resetting port 0.0 |
---|
574 | [10855] AHCI port 0 registers: |
---|
575 | PORT_CMD = 0x8007 |
---|
576 | command engine status: |
---|
577 | PORT_SCR_ACT = 0x0 |
---|
578 | PORT_CMD_ISSUE = 0x0 |
---|
579 | link/device status: |
---|
580 | PORT_SCR_STAT = 0x133 |
---|
581 | PORT_SCR_CTL = 0x0 |
---|
582 | PORT_SCR_ERR = 0x0 |
---|
583 | PORT_TFDATA = 0x50 |
---|
584 | interrupt status: |
---|
585 | PORT_IRQ_STAT = 0x0 |
---|
586 | PORT_IRQ_MASK = 0x0 |
---|
587 | HOST_IRQ_STAT = 0x0 |
---|
588 | [10880] ahci_stop_port 0.0 |
---|
589 | [10906] ahci_reset_port: setting link speed and power management options |
---|
590 | [10908] ahci_reset_port: issuing COMRESET on port 0 |
---|
591 | [10912] Wait for communication... |
---|
592 | [10914] ahci_reset_port: starting port 0 again |
---|
593 | [10916] ahci_start_port 0.0 |
---|
594 | [10917] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
595 | [10919] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
596 | [11125] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
597 | [11126] ATA command for 0.0.0, slot 0: |
---|
598 | [11128] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
599 | [11138] ata_cmd: 1530:4c0a 00 00 01 00 8d 31 35 00-00 00 c8 4c .....15....L |
---|
600 | [11146] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
601 | [11154] executing polled cmd on slot 0...[11187] ata_read_pp(): blocks transferred = 1 |
---|
602 | [11189] |
---|
603 | [11189] ahci_stop_port 0.0 |
---|
604 | [11250] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
605 | [11251] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
606 | [11253] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
607 | [11255] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
608 | [11257] ahci_read(0.0.0, 204812748, 1) |
---|
609 | [11259] ahci_reset_port: resetting port 0.0 |
---|
610 | [11261] AHCI port 0 registers: |
---|
611 | PORT_CMD = 0x8007 |
---|
612 | command engine status: |
---|
613 | PORT_SCR_ACT = 0x0 |
---|
614 | PORT_CMD_ISSUE = 0x0 |
---|
615 | link/device status: |
---|
616 | PORT_SCR_STAT = 0x133 |
---|
617 | PORT_SCR_CTL = 0x0 |
---|
618 | PORT_SCR_ERR = 0x0 |
---|
619 | PORT_TFDATA = 0x50 |
---|
620 | interrupt status: |
---|
621 | PORT_IRQ_STAT = 0x0 |
---|
622 | PORT_IRQ_MASK = 0x0 |
---|
623 | HOST_IRQ_STAT = 0x0 |
---|
624 | [11287] ahci_stop_port 0.0 |
---|
625 | [11312] ahci_reset_port: setting link speed and power management options |
---|
626 | [11314] ahci_reset_port: issuing COMRESET on port 0 |
---|
627 | [11318] Wait for communication... |
---|
628 | [11320] ahci_reset_port: starting port 0 again |
---|
629 | [11322] ahci_start_port 0.0 |
---|
630 | [11324] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
631 | [11326] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
632 | [11531] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
633 | [11533] ATA command for 0.0.0, slot 0: |
---|
634 | [11535] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
635 | [11544] ata_cmd: 1530:4c02 00 00 01 00 cc 31 35 00-00 00 c8 4c .....15....L |
---|
636 | [11552] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
637 | [11560] executing polled cmd on slot 0...[11593] ata_read_pp(): blocks transferred = 1 |
---|
638 | [11595] |
---|
639 | [11595] ahci_stop_port 0.0 |
---|
640 | [11656] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
641 | [11658] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
642 | [11660] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
643 | [11662] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
644 | [11664] ahci_read(0.0.0, 225295622, 1) |
---|
645 | [11666] ahci_reset_port: resetting port 0.0 |
---|
646 | [11667] AHCI port 0 registers: |
---|
647 | PORT_CMD = 0x8007 |
---|
648 | command engine status: |
---|
649 | PORT_SCR_ACT = 0x0 |
---|
650 | PORT_CMD_ISSUE = 0x0 |
---|
651 | link/device status: |
---|
652 | PORT_SCR_STAT = 0x133 |
---|
653 | PORT_SCR_CTL = 0x0 |
---|
654 | PORT_SCR_ERR = 0x0 |
---|
655 | PORT_TFDATA = 0x50 |
---|
656 | interrupt status: |
---|
657 | PORT_IRQ_STAT = 0x0 |
---|
658 | PORT_IRQ_MASK = 0x0 |
---|
659 | HOST_IRQ_STAT = 0x0 |
---|
660 | [11693] ahci_stop_port 0.0 |
---|
661 | [11718] ahci_reset_port: setting link speed and power management options |
---|
662 | [11720] ahci_reset_port: issuing COMRESET on port 0 |
---|
663 | [11724] Wait for communication... |
---|
664 | [11726] ahci_reset_port: starting port 0 again |
---|
665 | [11728] ahci_start_port 0.0 |
---|
666 | [11730] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
667 | [11732] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
668 | [11937] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
669 | [11939] ATA command for 0.0.0, slot 0: |
---|
670 | [11941] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
671 | [11951] ata_cmd: 1530:4c04 00 00 01 00 06 bd 6d 00-00 00 c8 4d ......m....M |
---|
672 | [11958] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
673 | [11966] executing polled cmd on slot 0...[12000] ata_read_pp(): blocks transferred = 1 |
---|
674 | [12001] |
---|
675 | [12001] ahci_stop_port 0.0 |
---|
676 | [12062] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
677 | [12064] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
678 | [12066] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
679 | [12068] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
680 | [12070] ahci_read(0.0.0, 225295560, 1) |
---|
681 | [12072] ahci_reset_port: resetting port 0.0 |
---|
682 | [12074] AHCI port 0 registers: |
---|
683 | PORT_CMD = 0x8007 |
---|
684 | command engine status: |
---|
685 | PORT_SCR_ACT = 0x0 |
---|
686 | PORT_CMD_ISSUE = 0x0 |
---|
687 | link/device status: |
---|
688 | PORT_SCR_STAT = 0x133 |
---|
689 | PORT_SCR_CTL = 0x0 |
---|
690 | PORT_SCR_ERR = 0x0 |
---|
691 | PORT_TFDATA = 0x50 |
---|
692 | interrupt status: |
---|
693 | PORT_IRQ_STAT = 0x0 |
---|
694 | PORT_IRQ_MASK = 0x0 |
---|
695 | HOST_IRQ_STAT = 0x0 |
---|
696 | [12099] ahci_stop_port 0.0 |
---|
697 | [12125] ahci_reset_port: setting link speed and power management options |
---|
698 | [12126] ahci_reset_port: issuing COMRESET on port 0 |
---|
699 | [12130] Wait for communication... |
---|
700 | [12132] ahci_reset_port: starting port 0 again |
---|
701 | [12134] ahci_start_port 0.0 |
---|
702 | [12136] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
703 | [12138] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
704 | [12343] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
705 | [12345] ATA command for 0.0.0, slot 0: |
---|
706 | [12347] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
707 | [12357] ata_cmd: 1530:4c0a 00 00 01 00 c8 bc 6d 00-00 00 c8 4d ......m....M |
---|
708 | [12365] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
709 | [12373] executing polled cmd on slot 0...[12406] ata_read_pp(): blocks transferred = 1 |
---|
710 | [12408] |
---|
711 | [12408] ahci_stop_port 0.0 |
---|
712 | [12468] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
713 | [12470] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
714 | [12472] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
715 | [12474] IORB 0828:c56c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
716 | [12476] ahci_read(0.0.0, 225295623, 1) |
---|
717 | [12478] ahci_reset_port: resetting port 0.0 |
---|
718 | [12480] AHCI port 0 registers: |
---|
719 | PORT_CMD = 0x8007 |
---|
720 | command engine status: |
---|
721 | PORT_SCR_ACT = 0x0 |
---|
722 | PORT_CMD_ISSUE = 0x0 |
---|
723 | link/device status: |
---|
724 | PORT_SCR_STAT = 0x133 |
---|
725 | PORT_SCR_CTL = 0x0 |
---|
726 | PORT_SCR_ERR = 0x0 |
---|
727 | PORT_TFDATA = 0x50 |
---|
728 | interrupt status: |
---|
729 | PORT_IRQ_STAT = 0x0 |
---|
730 | PORT_IRQ_MASK = 0x0 |
---|
731 | HOST_IRQ_STAT = 0x0 |
---|
732 | [12505] ahci_stop_port 0.0 |
---|
733 | [12531] ahci_reset_port: setting link speed and power management options |
---|
734 | [12533] ahci_reset_port: issuing COMRESET on port 0 |
---|
735 | [12537] Wait for communication... |
---|
736 | [12539] ahci_reset_port: starting port 0 again |
---|
737 | [12541] ahci_start_port 0.0 |
---|
738 | [12542] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
739 | [12544] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
740 | [12750] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
741 | [12751] ATA command for 0.0.0, slot 0: |
---|
742 | [12753] cmd_hdr: 0768:0000 05 00 01 00 00 00 00 00-00 a5 ef 00 00 00 00 00 ................ |
---|
743 | [12763] ata_cmd: 1530:4c02 00 00 01 00 07 bd 6d 00-00 00 c8 4d ......m....M |
---|
744 | [12771] sg_list: 0768:0580 10 a6 d3 7f 00 00 00 00-00 00 00 00 ff 01 00 00 ............... |
---|
745 | [12779] executing polled cmd on slot 0...[12812] ata_read_pp(): blocks transferred = 1 |
---|
746 | [12814] |
---|
747 | [12814] ahci_stop_port 0.0 |
---|
748 | [12875] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
749 | [12876] IORB 0828:c56c removed (queue = 0748:5a30) |
---|
750 | [12878] IORB 0828:c56c complete (status = 0x0001, error = 0x0000) |
---|
751 | [12935] IORB 0930:47da queued (cmd = 1/1, queue = 0748:5912 [driver], timeout = 0) |
---|
752 | [12937] IORB 0930:47da removed (queue = 0748:5912) |
---|
753 | [12939] IORB 0930:47da complete (status = 0x0001, error = 0x0000) |
---|
754 | [12941] IORB 0930:4864 queued (cmd = 2/1, queue = 0748:5e9e [port], timeout = 0) |
---|
755 | [12943] IORB 0930:4864 removed (queue = 0748:5e9e) |
---|
756 | [12945] IORB 0930:4864 complete (status = 0x0001, error = 0x0000) |
---|
757 | [12947] IORB 0930:4864 queued (cmd = 2/2, queue = 0748:5e9e [port], timeout = 0) |
---|
758 | [12949] IORB 0930:4864 removed (queue = 0748:5e9e) |
---|
759 | [12951] IORB 0930:4864 complete (status = 0x0001, error = 0x0000) |
---|
760 | [12953] IORB 0930:4864 queued (cmd = 2/1, queue = 0748:5e9e [port], timeout = 0) |
---|
761 | [12955] IORB 0930:4864 removed (queue = 0748:5e9e) |
---|
762 | [12957] IORB 0930:4864 complete (status = 0x0001, error = 0x0000) |
---|
763 | [12958] IORB 0930:48b2 queued (cmd = 8/2, queue = 0748:5e9e [port], timeout = 0) |
---|
764 | [12960] ahci_execute_cdb(0.7.0): 0930:48da 12 00 00 00 24 00 ....$. |
---|
765 | [12968] ahci_reset_port: resetting port 0.7 |
---|
766 | [12970] AHCI port 7 registers: |
---|
767 | PORT_CMD = 0x8007 |
---|
768 | command engine status: |
---|
769 | PORT_SCR_ACT = 0x0 |
---|
770 | PORT_CMD_ISSUE = 0x0 |
---|
771 | link/device status: |
---|
772 | PORT_SCR_STAT = 0x113 |
---|
773 | PORT_SCR_CTL = 0x0 |
---|
774 | PORT_SCR_ERR = 0x0 |
---|
775 | PORT_TFDATA = 0x50 |
---|
776 | interrupt status: |
---|
777 | PORT_IRQ_STAT = 0x0 |
---|
778 | PORT_IRQ_MASK = 0x0 |
---|
779 | HOST_IRQ_STAT = 0x0 |
---|
780 | [12998] ahci_stop_port 0.7 |
---|
781 | [13031] ahci_reset_port: setting link speed and power management options |
---|
782 | [13033] ahci_reset_port: issuing COMRESET on port 7 |
---|
783 | [13037] Wait for communication... |
---|
784 | [13039] ahci_reset_port: starting port 7 again |
---|
785 | [13041] ahci_start_port 0.7 |
---|
786 | [13042] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
787 | [13044] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
788 | [13046] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
789 | [13048] ATA command for 0.7.0, slot 0: |
---|
790 | [13050] cmd_hdr: 0780:7800 25 00 01 00 00 00 00 00-00 ed f2 00 00 00 00 00 %............... |
---|
791 | [13058] ata_cmd: 1530:4c72 05 00 00 00 00 00 00 00-00 00 a0 00 ............ |
---|
792 | [13066] atapi_cmd: 1530:4cf0 12 00 00 00 24 00 00 00-00 00 00 00 ....$....... |
---|
793 | [13076] sg_list: 0780:7d80 0c f9 ea 00 00 00 00 00-00 00 00 00 23 00 00 00 ............#... |
---|
794 | [13083] executing polled cmd on slot 0...[13093] |
---|
795 | [13093] ahci_stop_port 0.7 |
---|
796 | [13156] ahci_restore_bios_config: restoring AHCI BIOS configuration on adapter 0 |
---|
797 | [13158] IORB 0930:48b2 removed (queue = 0748:5e9e) |
---|
798 | [13160] IORB 0930:48b2 complete (status = 0x0001, error = 0x0000) |
---|
799 | [13162] IORB 0930:4864 queued (cmd = 2/2, queue = 0748:5e9e [port], timeout = 0) |
---|
800 | [13164] IORB 0930:4864 removed (queue = 0748:5e9e) |
---|
801 | [13166] IORB 0930:4864 complete (status = 0x0001, error = 0x0000) |
---|
802 | [13171] IORB 0130:0ca5 queued (cmd = 1/2, queue = 0748:5912 [driver], timeout = 0) |
---|
803 | [13173] leaving initialization mode |
---|
804 | [13175] ahci_complete_init: completing initialization of adapter #0 |
---|
805 | [13177] registering interrupt #5 |
---|
806 | [13179] ahci_complete_init: resetting port 0 |
---|
807 | [13181] ahci_reset_port: resetting port 0.0 |
---|
808 | [13183] AHCI port 0 registers: |
---|
809 | PORT_CMD = 0x8007 |
---|
810 | command engine status: |
---|
811 | PORT_SCR_ACT = 0x0 |
---|
812 | PORT_CMD_ISSUE = 0x0 |
---|
813 | link/device status: |
---|
814 | PORT_SCR_STAT = 0x133 |
---|
815 | PORT_SCR_CTL = 0x0 |
---|
816 | PORT_SCR_ERR = 0x0 |
---|
817 | PORT_TFDATA = 0x50 |
---|
818 | interrupt status: |
---|
819 | PORT_IRQ_STAT = 0x0 |
---|
820 | PORT_IRQ_MASK = 0x0 |
---|
821 | HOST_IRQ_STAT = 0x0 |
---|
822 | [13210] ahci_stop_port 0.0 |
---|
823 | [13218] ahci_reset_port: setting link speed and power management options |
---|
824 | [13220] ahci_reset_port: issuing COMRESET on port 0 |
---|
825 | [13224] Wait for communication... |
---|
826 | [13226] ahci_reset_port: starting port 0 again |
---|
827 | [13228] ahci_start_port 0.0 |
---|
828 | [13230] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
829 | [13232] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
830 | [13437] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
831 | [13439] ahci_complete_init: resetting port 7 |
---|
832 | [13441] ahci_reset_port: resetting port 0.7 |
---|
833 | [13443] AHCI port 7 registers: |
---|
834 | PORT_CMD = 0x8007 |
---|
835 | command engine status: |
---|
836 | PORT_SCR_ACT = 0x0 |
---|
837 | PORT_CMD_ISSUE = 0x0 |
---|
838 | link/device status: |
---|
839 | PORT_SCR_STAT = 0x113 |
---|
840 | PORT_SCR_CTL = 0x0 |
---|
841 | PORT_SCR_ERR = 0x0 |
---|
842 | PORT_TFDATA = 0x50 |
---|
843 | interrupt status: |
---|
844 | PORT_IRQ_STAT = 0x0 |
---|
845 | PORT_IRQ_MASK = 0x0 |
---|
846 | HOST_IRQ_STAT = 0x0 |
---|
847 | [13470] ahci_stop_port 0.7 |
---|
848 | [13500] ahci_reset_port: setting link speed and power management options |
---|
849 | [13501] ahci_reset_port: issuing COMRESET on port 7 |
---|
850 | [13505] Wait for communication... |
---|
851 | [13507] ahci_reset_port: starting port 7 again |
---|
852 | [13509] ahci_start_port 0.7 |
---|
853 | [13511] ahci_start_port: PORT_SCR_STAT = 0x113 |
---|
854 | [13513] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
855 | [13515] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
856 | Adapter 0: PCI=129:0:0 ID=1b4b:9230 Generic Generic irq=5 addr=0xd0500000 version=10200 |
---|
857 | Port 0: |
---|
858 | Drive 0: 60801 cylinders, 255 heads, 63 sectors per track (476937MB) (LVM) |
---|
859 | Port 1: |
---|
860 | No drive present |
---|
861 | Port 2: |
---|
862 | No drive present |
---|
863 | Port 3: |
---|
864 | No drive present |
---|
865 | Port 4: |
---|
866 | No drive present |
---|
867 | Port 5: |
---|
868 | No drive present |
---|
869 | Port 6: |
---|
870 | No drive present |
---|
871 | Port 7: |
---|
872 | Drive 0: atapi Drive present but no information available. Not queried by OS. |
---|
873 | [13544] IORB 0130:0ca5 removed (queue = 0748:5912) |
---|
874 | [13546] IORB 0130:0ca5 complete (status = 0x0001, error = 0x0000) |
---|
875 | [13550] IORB 0828:2d7c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
876 | [13552] ahci_read(0.0.0, 204812748, 1) |
---|
877 | [13554] ATA command for 0.0.0, slot 1: |
---|
878 | [13554] cmd_hdr: 0768:0020 05 00 01 00 00 00 00 00-80 a8 ef 00 00 00 00 00 ................ |
---|
879 | [13554] ata_cmd: 1530:483a 00 00 01 00 cc 31 35 00-00 00 c8 4c .....15....L |
---|
880 | [13554] sg_list: 0768:0900 00 f0 ea 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
881 | [13554] issuing command on slot 1 |
---|
882 | [43812] timeout for IORB 0828:2d7c |
---|
883 | [43812] IORB 0828:2d7c removed (queue = 0748:5a30) |
---|
884 | [43814] reset_ctxhook() started |
---|
885 | [43816] IORB 0828:2d7c removed (queue = 0748:b9e4) |
---|
886 | [43818] ahci_reset_port: resetting port 0.0 |
---|
887 | [43820] AHCI port 0 registers: |
---|
888 | PORT_CMD = 0xc117 |
---|
889 | command engine status: |
---|
890 | PORT_SCR_ACT = 0x0 |
---|
891 | PORT_CMD_ISSUE = 0x0 |
---|
892 | link/device status: |
---|
893 | PORT_SCR_STAT = 0x133 |
---|
894 | PORT_SCR_CTL = 0x0 |
---|
895 | PORT_SCR_ERR = 0x0 |
---|
896 | PORT_TFDATA = 0x50 |
---|
897 | interrupt status: |
---|
898 | PORT_IRQ_STAT = 0x1 |
---|
899 | PORT_IRQ_MASK = 0x7980001f |
---|
900 | HOST_IRQ_STAT = 0x1 |
---|
901 | [43847] ahci_stop_port 0.0 |
---|
902 | [43906] ahci_reset_port: setting link speed and power management options |
---|
903 | [43908] ahci_reset_port: issuing COMRESET on port 0 |
---|
904 | [43912] Wait for communication... |
---|
905 | [43914] ahci_reset_port: starting port 0 again |
---|
906 | [43916] ahci_start_port 0.0 |
---|
907 | [43917] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
908 | [43919] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
909 | [44125] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
910 | [44126] IORB 0828:2d7c complete (status = 0x0003, error = 0x8506) |
---|
911 | [44128] reset_ctxhook() completed |
---|
912 | [44130] IORB 0828:2d7c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
913 | [44132] ahci_read(0.0.0, 204812748, 1) |
---|
914 | [44134] ATA command for 0.0.0, slot 1: |
---|
915 | [44134] cmd_hdr: 0768:0020 05 00 01 00 00 00 00 00-80 a8 ef 00 00 00 00 00 ................ |
---|
916 | [44134] ata_cmd: 1530:483a 00 00 01 00 cc 31 35 00-00 00 c8 4c .....15....L |
---|
917 | [44134] sg_list: 0768:0900 00 f0 ea 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
918 | [44134] issuing command on slot 1 |
---|
919 | [74406] timeout for IORB 0828:2d7c |
---|
920 | [74406] IORB 0828:2d7c removed (queue = 0748:5a30) |
---|
921 | [74408] reset_ctxhook() started |
---|
922 | [74410] IORB 0828:2d7c removed (queue = 0748:b9e4) |
---|
923 | [74412] ahci_reset_port: resetting port 0.0 |
---|
924 | [74414] AHCI port 0 registers: |
---|
925 | PORT_CMD = 0xc117 |
---|
926 | command engine status: |
---|
927 | PORT_SCR_ACT = 0x0 |
---|
928 | PORT_CMD_ISSUE = 0x0 |
---|
929 | link/device status: |
---|
930 | PORT_SCR_STAT = 0x133 |
---|
931 | PORT_SCR_CTL = 0x0 |
---|
932 | PORT_SCR_ERR = 0x0 |
---|
933 | PORT_TFDATA = 0x50 |
---|
934 | interrupt status: |
---|
935 | PORT_IRQ_STAT = 0x1 |
---|
936 | PORT_IRQ_MASK = 0x7980001f |
---|
937 | HOST_IRQ_STAT = 0x1 |
---|
938 | [74441] ahci_stop_port 0.0 |
---|
939 | [74500] ahci_reset_port: setting link speed and power management options |
---|
940 | [74501] ahci_reset_port: issuing COMRESET on port 0 |
---|
941 | [74505] Wait for communication... |
---|
942 | [74507] ahci_reset_port: starting port 0 again |
---|
943 | [74509] ahci_start_port 0.0 |
---|
944 | [74511] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
945 | [74513] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
946 | [74718] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
947 | [74720] IORB 0828:2d7c complete (status = 0x0003, error = 0x8506) |
---|
948 | [74722] reset_ctxhook() completed |
---|
949 | [74724] IORB 0828:2d7c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
950 | [74726] ahci_read(0.0.0, 204812748, 1) |
---|
951 | [74728] ATA command for 0.0.0, slot 1: |
---|
952 | [74728] cmd_hdr: 0768:0020 05 00 01 00 00 00 00 00-80 a8 ef 00 00 00 00 00 ................ |
---|
953 | [74728] ata_cmd: 1530:483a 00 00 01 00 cc 31 35 00-00 00 c8 4c .....15....L |
---|
954 | [74728] sg_list: 0768:0900 00 f0 ea 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
955 | [74728] issuing command on slot 1 |
---|
956 | [105000] timeout for IORB 0828:2d7c |
---|
957 | [105000] IORB 0828:2d7c removed (queue = 0748:5a30) |
---|
958 | [105001] reset_ctxhook() started |
---|
959 | [105003] IORB 0828:2d7c removed (queue = 0748:b9e4) |
---|
960 | [105005] ahci_reset_port: resetting port 0.0 |
---|
961 | [105007] AHCI port 0 registers: |
---|
962 | PORT_CMD = 0xc117 |
---|
963 | command engine status: |
---|
964 | PORT_SCR_ACT = 0x0 |
---|
965 | PORT_CMD_ISSUE = 0x0 |
---|
966 | link/device status: |
---|
967 | PORT_SCR_STAT = 0x133 |
---|
968 | PORT_SCR_CTL = 0x0 |
---|
969 | PORT_SCR_ERR = 0x0 |
---|
970 | PORT_TFDATA = 0x50 |
---|
971 | interrupt status: |
---|
972 | PORT_IRQ_STAT = 0x1 |
---|
973 | PORT_IRQ_MASK = 0x7980001f |
---|
974 | HOST_IRQ_STAT = 0x1 |
---|
975 | [105035] ahci_stop_port 0.0 |
---|
976 | [105093] ahci_reset_port: setting link speed and power management options |
---|
977 | [105095] ahci_reset_port: issuing COMRESET on port 0 |
---|
978 | [105099] Wait for communication... |
---|
979 | [105101] ahci_reset_port: starting port 0 again |
---|
980 | [105103] ahci_start_port 0.0 |
---|
981 | [105105] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
982 | [105107] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
983 | [105312] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
984 | [105314] IORB 0828:2d7c complete (status = 0x0003, error = 0x8506) |
---|
985 | [105316] reset_ctxhook() completed |
---|
986 | [105318] IORB 0828:2d7c queued (cmd = 4/1, queue = 0748:5a30 [port], timeout = 0) |
---|
987 | [105320] ahci_read(0.0.0, 204812748, 1) |
---|
988 | [105322] ATA command for 0.0.0, slot 1: |
---|
989 | [105322] cmd_hdr: 0768:0020 05 00 01 00 00 00 00 00-80 a8 ef 00 00 00 00 00 ................ |
---|
990 | [105322] ata_cmd: 1530:483a 00 00 01 00 cc 31 35 00-00 00 c8 4c .....15....L |
---|
991 | [105322] sg_list: 0768:0900 00 f0 ea 00 00 00 00 00-00 00 00 00 ff 01 00 00 ................ |
---|
992 | [105322] issuing command on slot 1 |
---|
993 | [135593] timeout for IORB 0828:2d7c |
---|
994 | [135593] IORB 0828:2d7c removed (queue = 0748:5a30) |
---|
995 | [135595] reset_ctxhook() started |
---|
996 | [135597] IORB 0828:2d7c removed (queue = 0748:b9e4) |
---|
997 | [135599] ahci_reset_port: resetting port 0.0 |
---|
998 | [135601] AHCI port 0 registers: |
---|
999 | PORT_CMD = 0xc117 |
---|
1000 | command engine status: |
---|
1001 | PORT_SCR_ACT = 0x0 |
---|
1002 | PORT_CMD_ISSUE = 0x0 |
---|
1003 | link/device status: |
---|
1004 | PORT_SCR_STAT = 0x133 |
---|
1005 | PORT_SCR_CTL = 0x0 |
---|
1006 | PORT_SCR_ERR = 0x0 |
---|
1007 | PORT_TFDATA = 0x50 |
---|
1008 | interrupt status: |
---|
1009 | PORT_IRQ_STAT = 0x1 |
---|
1010 | PORT_IRQ_MASK = 0x7980001f |
---|
1011 | HOST_IRQ_STAT = 0x1 |
---|
1012 | [135628] ahci_stop_port 0.0 |
---|
1013 | [135687] ahci_reset_port: setting link speed and power management options |
---|
1014 | [135689] ahci_reset_port: issuing COMRESET on port 0 |
---|
1015 | [135693] Wait for communication... |
---|
1016 | [135695] ahci_reset_port: starting port 0 again |
---|
1017 | [135697] ahci_start_port 0.0 |
---|
1018 | [135699] ahci_start_port: PORT_SCR_STAT = 0x133 |
---|
1019 | [135701] ahci_start_port: PORT_SCR_ERR = 0x0 |
---|
1020 | [135906] ahci_reset_port: PORT_TFDATA = 0x50 |
---|
1021 | [135908] IORB 0828:2d7c complete (status = 0x0003, error = 0x8506) |
---|
1022 | [135910] reset_ctxhook() completed |
---|
1023 | |
---|
1024 | *** |
---|
1025 | *** DISCONNECT |
---|
1026 | *** time 12:40:49 |
---|
1027 | *** |
---|